_PyPathConfig_Init() now also initialize home and program_name:
* Rename existing _PyPathConfig_Init() to _PyPathConfig_Calculate().
Add a new _PyPathConfig_Init() function in pathconfig.c which
handles the _Py_path_config variable and call
_PyPathConfig_Calculate().
* Add home and program_name fields to _PyPathConfig.home
* _PyPathConfig_Init() now initialize home and program_name
from main_config
* Py_SetProgramName(), Py_SetPythonHome() and Py_GetPythonHome() now
calls Py_FatalError() on failure, instead of silently ignoring
failures.
* config_init_home() now gets directly _Py_path_config.home to only
get the value set by Py_SetPythonHome(), or NULL if
Py_SetPythonHome() was not called.
* config_get_program_name() now gets directly
_Py_path_config.program_name to only get the value set by
Py_SetProgramName(), or NULL if Py_SetProgramName() was not called.
* pymain_init_python() doesn't call Py_SetProgramName() anymore,
_PyPathConfig_Init() now always sets the program name
* Call _PyMainInterpreterConfig_Read() in
pymain_parse_cmdline_envvars_impl() to control the memory allocator
* C API documentation: it's no more safe to call Py_GetProgramName()
before Py_Initialize().
* Factorize code from PC/getpathp.c and Modules/getpath.c to remove
duplicated code
* rename pathconfig_clear() to _PyPathConfig_Clear()
* Inline _PyPathConfig_Fini() in pymain_impl() and then remove it,
since it's a oneliner
Changes:
* _PyPathConfig_Fini() cannot be called in Py_FinalizeEx().
Py_Initialize() and Py_Finalize() can be called multiple times, but
it must not "forget" parameters set by Py_SetProgramName(),
Py_SetPath() or Py_SetPythonHome(), whereas _PyPathConfig_Fini()
clear all these parameters.
* config_get_program_name() and calculate_program_full_path() now
also decode paths using Py_DecodeLocale() to use the
surrogateescape error handler, rather than decoding using
mbstowcs() which is strict.
* Change _Py_CheckPython3() prototype: () => (void)
* Truncate a few lines which were too long
* _PyMainInterpreterConfig_ReadEnv() now sets program_name from
environment variables and pymain_parse_envvars() implements the
falls back on argv[0].
* Remove _PyMain.program_name: use the program_name from
_PyMainInterpreterConfig
* Move the Py_SetProgramName() call back to pymain_init_python(),
just before _Py_InitializeCore().
* pathconfig_global_init() now also calls
_PyMainInterpreterConfig_Read() to set program_name if it isn't set
yet
* Cleanup PyCalculatePath: pass main_config to subfunctions to get
directly fields from main_config (home, module_search_path_env and
program_name)
* Rename PyPathConfig structure to _PyPathConfig and move it to
Include/internal/pystate.h
* Rename path_config to _Py_path_config
* _PyPathConfig: Rename program_name field to program_full_path
* Add assert(str != NULL); to _PyMem_RawWcsdup(), _PyMem_RawStrdup()
and _PyMem_Strdup().
* Rename calculate_path() to pathconfig_global_init(). The function
now does nothing if it's already initiallized.
In _io_FileIO_readall_impl(), lseek() and _Py_fstat_noraise() were called
without releasing the GIL. This can cause all threads to hang for
unlimited time when calling FileIO.read() and the NFS server is not
accessible.
Fix the following false-alarm Coverity warning:
Result is not floating-point
(UNINTENDED_INTEGER_DIVISION)integer_division: Dividing integer
expressions 9223372036854775807LL and 1000LL, and then converting
the integer quotient to type double. Any remainder, or fractional
part of the quotient, is ignored.
To compute and use a non-integer quotient, change or cast either
operand to type double. If integer division is intended, consider
indicating that by casting the result to type long long .
Handle PyModule_AddIntConstant() and PyModule_AddStringConstant()
failures. Add also constants before calling setup_readline(), since
setup_readline() registers callbacks which uses a reference to the
module, whereas the module is destroyed if adding constants fails.
Fix Coverity warning:
CID 1414686: Unchecked return value (CHECKED_RETURN)
2. check_return: Calling PyModule_AddStringConstant without checking
return value (as is done elsewhere 45 out of 55 times).
* bpo-32101: Add sys.flags.dev_mode flag
Rename also the "Developer mode" to the "Development mode".
* bpo-32101: Add PYTHONDEVMODE environment variable
Mention it in the development chapiter.
* Fix _PyMem_SetupAllocators("debug"): always restore allocators to
the defaults, rather than only caling _PyMem_SetupDebugHooks().
* Add _PyMem_SetDefaultAllocator() helper to set the "default"
allocator.
* Add _PyMem_GetAllocatorsName(): get the name of the allocators
* main() now uses debug hooks on memory allocators if Py_DEBUG is
defined, rather than calling directly malloc()
* Document default memory allocators in C API documentation
* _Py_InitializeCore() now fails with a fatal user error if
PYTHONMALLOC value is an unknown memory allocator, instead of
failing with a fatal internal error.
* Add new tests on the PYTHONMALLOC environment variable
* Add support.with_pymalloc()
* Add the _testcapi.WITH_PYMALLOC constant and expose it as
support.with_pymalloc().
* sysconfig.get_config_var('WITH_PYMALLOC') doesn't work on Windows, so
replace it with support.with_pymalloc().
* pythoninfo: add _testcapi collector for pymem
* Py_Main() now calls Py_SetProgramName() earlier to be able to get
the program name in _PyMainInterpreterConfig_ReadEnv().
* Rename prog to program_name
* Rename progpath to program_name
Py_GetPath() and Py_Main() now call
_PyMainInterpreterConfig_ReadEnv() to share the same code to get
environment variables.
Changes:
* Add _PyMainInterpreterConfig_ReadEnv()
* Add _PyMainInterpreterConfig_Clear()
* Add _PyMem_RawWcsdup()
* _PyMainInterpreterConfig: rename pythonhome to home
* Rename _Py_ReadMainInterpreterConfig() to
_PyMainInterpreterConfig_Read()
* Use _Py_INIT_USER_ERR(), instead of _Py_INIT_ERR(), for decoding
errors: the user is able to fix the issue, it's not a bug in
Python. Same change was made in _Py_INIT_NO_MEMORY().
* Remove _Py_GetPythonHomeWithConfig()
* calculate_path() rewritten in Modules/getpath.c and PC/getpathp.c
* Move global variables into a new PyPathConfig structure.
* calculate_path():
* Split the huge calculate_path() function into subfunctions.
* Add PyCalculatePath structure to pass data between subfunctions.
* Document PyCalculatePath fields.
* Move cleanup code into a new calculate_free() subfunction
* calculate_init() now handles Py_DecodeLocale() failures properly
* calculate_path() is now atomic: only replace PyPathConfig
(path_config) at once on success.
* _Py_GetPythonHomeWithConfig() now returns an error on failure
* Add _Py_INIT_NO_MEMORY() helper: report a memory allocation failure
* Coding style fixes (PEP 7)
* Py_Main() now reads the PYTHONHOME environment variable
* Add _Py_GetPythonHomeWithConfig() private function
* Add _PyWarnings_InitWithConfig()
* init_filters() doesn't get the current core configuration from the
current interpreter or Python thread anymore. Pass explicitly the
configuration to _PyWarnings_InitWithConfig().
* _Py_InitializeCore() now fails on _PyWarnings_InitWithConfig()
failure.
* Pass configuration as constant
Changes:
* Py_Main() initializes _PyCoreConfig.module_search_path_env from
the PYTHONPATH environment variable.
* PyInterpreterState_New() now initializes core_config and config
fields
* Compute sys.path a little bit ealier in
_Py_InitializeMainInterpreter() and new_interpreter()
* Add _Py_GetPathWithConfig() private function.
Py_Main() now handles two more -X options:
* -X showrefcount: new _PyCoreConfig.show_ref_count field
* -X showalloccount: new _PyCoreConfig.show_alloc_count field
The developer mode (-X dev) now creates all default warnings filters
to order filters in the correct order to always show ResourceWarning
and make BytesWarning depend on the -b option.
Write a functional test to make sure that ResourceWarning is logged
twice at the same location in the developer mode.
Add a new 'dev_mode' field to _PyCoreConfig.
Add a new "developer mode": new "-X dev" command line option to
enable debug checks at runtime.
Changes:
* Add unit tests for -X dev
* test_cmd_line: replace test.support with support.
* Fix _PyRuntimeState_Fini(): Use the same memory allocator
than _PyRuntimeState_Init().
* Fix _PyMem_GetDefaultRawAllocator()
Parse more env vars in Py_Main():
* Add more options to _PyCoreConfig:
* faulthandler
* tracemalloc
* importtime
* Move code to parse environment variables from _Py_InitializeCore()
to Py_Main(). This change fixes a regression from Python 3.6:
PYTHONUNBUFFERED is now read before calling pymain_init_stdio().
* _PyFaulthandler_Init() and _PyTraceMalloc_Init() now take an
argument to decide if the module has to be enabled at startup.
* tracemalloc_start() is now responsible to check the maximum number
of frames.
Other changes:
* Cleanup Py_Main():
* Rename some pymain_xxx() subfunctions
* Add pymain_run_python() subfunction
* Cleanup Py_NewInterpreter()
* _PyInterpreterState_Enable() now reports failure
* init_hash_secret() now considers pyurandom() failure as an "user
error": don't fail with abort().
* pymain_optlist_append() and pymain_strdup() now sets err on memory
allocation failure.
* Don't use "Python runtime" anymore to parse command line options or
to get environment variables: pymain_init() is now a strict
separation.
* Use an error message rather than "crashing" directly with
Py_FatalError(). Limit the number of calls to Py_FatalError(). It
prepares the code to handle errors more nicely later.
* Warnings options (-W, PYTHONWARNINGS) and "XOptions" (-X) are now
only added to the sys module once Python core is properly
initialized.
* _PyMain is now the well identified owner of some important strings
like: warnings options, XOptions, and the "program name". The
program name string is now properly freed at exit.
pymain_free() is now responsible to free the "command" string.
* Rename most methods in Modules/main.c to use a "pymain_" prefix to
avoid conflits and ease debug.
* Replace _Py_CommandLineDetails_INIT with memset(0)
* Reorder a lot of code to fix the initialization ordering. For
example, initializing standard streams now comes before parsing
PYTHONWARNINGS.
* Py_Main() now handles errors when adding warnings options and
XOptions.
* Add _PyMem_GetDefaultRawAllocator() private function.
* Cleanup _PyMem_Initialize(): remove useless global constants: move
them into _PyMem_Initialize().
* Call _PyRuntime_Initialize() as soon as possible:
_PyRuntime_Initialize() now returns an error message on failure.
* Add _PyInitError structure and following macros:
* _Py_INIT_OK()
* _Py_INIT_ERR(msg)
* _Py_INIT_USER_ERR(msg): "user" error, don't abort() in that case
* _Py_INIT_FAILED(err)
* Fix compilation of the socket module on NetBSD 8.
* Fix the assertion failure or reading arbitrary data when parse
a AF_BLUETOOTH address on NetBSD and DragonFly BSD.
* Fix other potential errors and make the code more reliable.
kB (*kilo* byte) unit means 1000 bytes, whereas KiB ("kibibyte")
means 1024 bytes. KB was misused: replace kB or KB with KiB when
appropriate.
Same change for MB and GB which become MiB and GiB.
Change the output of Tools/iobench/iobench.py.
Round also the size of the documentation from 5.5 MB to 5 MiB.
All Blake2 params have to be encoded in little-endian byte order. For
the two multi-byte integer params, leaf_length and node_offset, that
means that assigning a native-endian integer to them appears to work on
little-endian platforms, but gives the wrong result on big-endian. The
current libb2 API doesn't make that very clear, and @sneves is working
on new API functions in the GH issue above. In the meantime, we can work
around the problem by explicitly assigning little-endian values to the
parameter block.
See https://github.com/BLAKE2/libb2/issues/12.
When a single .c file contains several functions and/or methods with
the same name, a safety _METHODDEF #define statement is generated
only for one of them.
This fixes the bug by using the full name of the function to avoid
duplicates rather than just the name.
Add new time functions:
* time.clock_gettime_ns()
* time.clock_settime_ns()
* time.monotonic_ns()
* time.perf_counter_ns()
* time.process_time_ns()
* time.time_ns()
Add new _PyTime functions:
* _PyTime_FromTimespec()
* _PyTime_FromNanosecondsObject()
* _PyTime_FromTimeval()
Other changes:
* Add also os.times() tests to test_os.
* pytime_fromtimeval() and pytime_fromtimeval() now return
_PyTime_MAX or _PyTime_MIN on overflow, rather than undefined
behaviour
* _PyTime_FromNanoseconds() parameter type changes from long long to
_PyTime_t
