Add *preserve_metadata* keyword-only argument to `pathlib.Path.copy()`, defaulting to false. When set to true, we copy timestamps, permissions, extended attributes and flags where available, like `shutil.copystat()`. The argument has no effect on Windows, where metadata is always copied.
Internally (in the pathlib ABCs), path types gain `_readable_metadata` and `_writable_metadata` attributes. These sets of strings describe what kinds of metadata can be retrieved and stored. We take an intersection of `source._readable_metadata` and `target._writable_metadata` to minimise reads/writes. A new `_read_metadata()` method accepts a set of metadata keys and returns a dict with those keys, and a new `_write_metadata()` method accepts a dict of metadata. We *might* make these public in future, but it's hard to justify while the ABCs are still private.
Make error message for index() methods consistent
Remove the repr of the searched value (which can be arbitrary large)
from ValueError messages for list.index(), range.index(), deque.index(),
deque.remove() and ShareableList.index(). Make the error messages
consistent with error messages for other index() and remove()
methods.
This reduces the system call count of a simple program[0] that reads all
the `.rst` files in Doc by over 10% (5706 -> 4734 system calls on my
linux system, 5813 -> 4875 on my macOS)
This reduces the number of `fstat()` calls always and seek calls most
the time. Stat was always called twice, once at open (to error early on
directories), and a second time to get the size of the file to be able
to read the whole file in one read. Now the size is cached with the
first call.
The code keeps an optimization that if the user had previously read a
lot of data, the current position is subtracted from the number of bytes
to read. That is somewhat expensive so only do it on larger files,
otherwise just try and read the extra bytes and resize the PyBytes as
needeed.
I built a little test program to validate the behavior + assumptions
around relative costs and then ran it under `strace` to get a log of the
system calls. Full samples below[1].
After the changes, this is everything in one `filename.read_text()`:
```python3
openat(AT_FDCWD, "cpython/Doc/howto/clinic.rst", O_RDONLY|O_CLOEXEC) = 3`
fstat(3, {st_mode=S_IFREG|0644, st_size=343, ...}) = 0`
ioctl(3, TCGETS, 0x7ffdfac04b40) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(3, 0, SEEK_CUR) = 0
read(3, ":orphan:\n\n.. This page is retain"..., 344) = 343
read(3, "", 1) = 0
close(3) = 0
```
This does make some tradeoffs
1. If the file size changes between open() and readall(), this will
still get all the data but might have more read calls.
2. I experimented with avoiding the stat + cached result for small files
in general, but on my dev workstation at least that tended to reduce
performance compared to using the fstat().
[0]
```python3
from pathlib import Path
nlines = []
for filename in Path("cpython/Doc").glob("**/*.rst"):
nlines.append(len(filename.read_text()))
```
[1]
Before small file:
```
openat(AT_FDCWD, "cpython/Doc/howto/clinic.rst", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=343, ...}) = 0
ioctl(3, TCGETS, 0x7ffe52525930) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(3, 0, SEEK_CUR) = 0
lseek(3, 0, SEEK_CUR) = 0
fstat(3, {st_mode=S_IFREG|0644, st_size=343, ...}) = 0
read(3, ":orphan:\n\n.. This page is retain"..., 344) = 343
read(3, "", 1) = 0
close(3) = 0
```
After small file:
```
openat(AT_FDCWD, "cpython/Doc/howto/clinic.rst", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=343, ...}) = 0
ioctl(3, TCGETS, 0x7ffdfac04b40) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(3, 0, SEEK_CUR) = 0
read(3, ":orphan:\n\n.. This page is retain"..., 344) = 343
read(3, "", 1) = 0
close(3) = 0
```
Before large file:
```
openat(AT_FDCWD, "cpython/Doc/c-api/typeobj.rst", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=133104, ...}) = 0
ioctl(3, TCGETS, 0x7ffe52525930) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(3, 0, SEEK_CUR) = 0
lseek(3, 0, SEEK_CUR) = 0
fstat(3, {st_mode=S_IFREG|0644, st_size=133104, ...}) = 0
read(3, ".. highlight:: c\n\n.. _type-struc"..., 133105) = 133104
read(3, "", 1) = 0
close(3) = 0
```
After large file:
```
openat(AT_FDCWD, "cpython/Doc/c-api/typeobj.rst", O_RDONLY|O_CLOEXEC) = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=133104, ...}) = 0
ioctl(3, TCGETS, 0x7ffdfac04b40) = -1 ENOTTY (Inappropriate ioctl for device)
lseek(3, 0, SEEK_CUR) = 0
lseek(3, 0, SEEK_CUR) = 0
read(3, ".. highlight:: c\n\n.. _type-struc"..., 133105) = 133104
read(3, "", 1) = 0
close(3) = 0
```
Co-authored-by: Shantanu <12621235+hauntsaninja@users.noreply.github.com>
Co-authored-by: Erlend E. Aasland <erlend.aasland@protonmail.com>
Co-authored-by: Victor Stinner <vstinner@python.org>
As noted in gh-117983, the import importlib.util can be triggered at
interpreter startup under some circumstances, so adding threading makes
it a potentially obligatory load.
Lazy loading is not used in the stdlib, so this removes an unnecessary
load for the majority of users and slightly increases the cost of the
first lazily loaded module.
An obligatory threading load breaks gevent, which monkeypatches the
stdlib. Although unsupported, there doesn't seem to be an offsetting
benefit to breaking their use case.
For reference, here are benchmarks for the current main branch:
```
❯ hyperfine -w 8 './python -c "import importlib.util"'
Benchmark 1: ./python -c "import importlib.util"
Time (mean ± σ): 9.7 ms ± 0.7 ms [User: 7.7 ms, System: 1.8 ms]
Range (min … max): 8.4 ms … 13.1 ms 313 runs
```
And with this patch:
```
❯ hyperfine -w 8 './python -c "import importlib.util"'
Benchmark 1: ./python -c "import importlib.util"
Time (mean ± σ): 8.4 ms ± 0.7 ms [User: 6.8 ms, System: 1.4 ms]
Range (min … max): 7.2 ms … 11.7 ms 352 runs
```
Compare to:
```
❯ hyperfine -w 8 './python -c pass'
Benchmark 1: ./python -c pass
Time (mean ± σ): 7.6 ms ± 0.6 ms [User: 5.9 ms, System: 1.6 ms]
Range (min … max): 6.7 ms … 11.3 ms 390 runs
```
This roughly halves the import time of importlib.util.
This amends 6988ff02a5: memory allocation for
stginfo->ffi_type_pointer.elements in PyCSimpleType_init() should be
more generic (perhaps someday fmt->pffi_type->elements will be not a
two-elements array).
It should finally resolve#61103.
Co-authored-by: Victor Stinner <vstinner@python.org>
Co-authored-by: Bénédikt Tran <10796600+picnixz@users.noreply.github.com>
Check for `ERROR_INVALID_PARAMETER` when calling `_winapi.CopyFile2()` and
raise `UnsupportedOperation`. In `Path.copy()`, handle this exception and
fall back to the `PathBase.copy()` implementation.
* Move get_signal_name() from test.libregrtest to test.support.
* Use get_signal_name() in support.script_helper.
* support.script_helper now decodes stdout and stderr from UTF-8,
instead of ASCII, if a command failed.
When creating the JUnit XML file, regrtest now escapes characters
which are invalid in XML, such as the chr(27) control character used
in ANSI escape sequences.
asyncio earlier relied on subprocess module to send signals to the process, this has some drawbacks one being that subprocess module unnecessarily calls waitpid on child processes and hence it races with asyncio implementation which internally uses child watchers. To mitigate this, now asyncio sends signals directly to the process without going through the subprocess on non windows systems. On Windows it fallbacks to subprocess module handling but on windows there are no child watchers so this issue doesn't exists altogether.
In some cases, previously computed as (nan+nanj), we could
recover meaningful component values in the result, see
e.g. the C11, Annex G.5.2, routine _Cdivd().
* parse_intermixed_args() now raises ArgumentError instead of calling
error() if exit_on_error is false.
* Internal code now always raises ArgumentError instead of calling
error(). It is then caught at the higher level and error() is called if
exit_on_error is true.
On Windows, test_cext and test_cppext now pass /WX flag to the MSC
compiler to treat all compiler warnings as errors. In verbose mode,
these tests now log the compiler commands to help debugging.
Change Py_BUILD_ASSERT_EXPR implementation on Windows to avoid a
compiler warning about an unnamed structure.
The check for whether the log file is a real file is expensive on NFS
filesystems. This commit reorders the rollover condition checking to
not do the file type check if the expected file size is less than the
rotation threshold.
Co-authored-by: Oleg Iarygin <oleg@arhadthedev.net>
This PR sets up tagged pointers for CPython.
The general idea is to create a separate struct _PyStackRef for everything on the evaluation stack to store the bits. This forces the C compiler to warn us if we try to cast things or pull things out of the struct directly.
Only for free threading: We tag the low bit if something is deferred - that means we skip incref and decref operations on it. This behavior may change in the future if Mark's plans to defer all objects in the interpreter loop pans out.
This implies a strict stack reference discipline is required. ALL incref and decref operations on stackrefs must use the stackref variants. It is unsafe to untag something then do normal incref/decref ops on it.
The new incref and decref variants are called dup and close. They mimic a "handle" API operating on these stackrefs.
Please read Include/internal/pycore_stackref.h for more information!
---------
Co-authored-by: Mark Shannon <9448417+markshannon@users.noreply.github.com>
