gh-131325: fix sendfile fallback implementation to drain data after writing to transport (GH-131376)
(cherry picked from commit 94f4d87aeb)
Co-authored-by: Kumar Aditya <kumaraditya@python.org>
gh-130727: Retry test_wmi on TimeoutError (GH-130832)
Use sleeping_retry() in test_wmi to retry multiple times on
TimeoutError. Wait up to LONG_TIMEOUT seconds (5 minutes by default).
(cherry picked from commit f67ff9e820)
Co-authored-by: Victor Stinner <vstinner@python.org>
gh-131339: test PyBytes_Size for a zero-size bytes object (GH-131340)
(cherry picked from commit 3ae67ba97e)
Co-authored-by: Nybblista <170842536+nybblista@users.noreply.github.com>
gh-129843: fix pure Python implementation of `warnings.warn_explicit` (GH-129848)
The pure Python implementation of `warnings.warn_explicit` constructs a `WarningMessage`
with an incorrect source (it incorrectly sets the WarningMessage's line to the given `source`).
(cherry picked from commit 80e00ecc39)
Co-authored-by: Srinivas Reddy Thatiparthy (తాటిపర్తి శ్రీనివాస్ రెడ్డి) <thatiparthysreenivas@gmail.com>
Fix the pure Python implementation of `fromisoformat()` to reject any
non-digit characters, including whitespace, in the fractional part
of time specification. This makes the behavior consistent with the C
implementation, and prevents incorrect parsing of these fractions
(e.g. `.400 ` would be misinterpreted as `.04`).
(cherry picked from commit 33494b4d0d)
(cherry picked from commit 27fd328cf6)
Co-authored-by: Victor Stinner <vstinner@python.org>
Co-authored-by: Michał Górny <mgorny@gentoo.org>
gh-125331: Allow the parser to activate future imports on the fly (GH-125482)
(cherry picked from commit 3bd3e09588)
Co-authored-by: Pablo Galindo Salgado <Pablogsal@gmail.com>
The workload to advance the virtual timeout is too lightweight for some
platforms. As result the test goes in timeout as it never reaches the
end of the timer. By having a heavier workload, the virtual timer
advances rapidly and the SIGVTALRM is sent before the timeout.
(cherry picked from commit 7879081198)
Co-authored-by: Diego Russo <diego.russo@arm.com>
The test could deadlock trying join on the worker processes.
Apply the same technique as gh-130933.
Join the process before the test ends in `test_notify` as well.
(cherry picked from commit edd1eca336)
Co-authored-by: Sam Gross <colesbury@gmail.com>
The test could deadlock trying join on the worker processes due to a
combination of behaviors:
* The use of `assertReachesEventually` did not ensure that workers
actually woken.release() because the SyncManager's Semaphore does not
implement get_value.
* This mean that the test could finish and the variable "sleeping" would
got out of scope and be collected. This unregisters the proxy leading
to failures in the worker or possibly the manager.
* The subsequent call to `p.join()` during cleanUp therefore never
finished.
This takes two approaches to fix this:
1) Use woken.acquire() to ensure that the workers actually finish
calling woken.release()
2) At the end of the test, wait until the workers are finished, while `cond`,
`sleeping`, and `woken` are still valid.
(cherry picked from commit c476410dc5)
Co-authored-by: Sam Gross <colesbury@gmail.com>
gh-116742: Fix subprocess test_check_output_timeout() (GH-130836)
Fix a race condition in test_check_output_timeout() of
test_subprocess. Don't write into stdout anymore, since there is no
reliable way to synchronize the parent and the child processes.
Change the timeout from 3 seconds to 0.1 seconds, and remove
@requires_resource('walltime') decorator.
(cherry picked from commit 67a942d427)
Co-authored-by: Victor Stinner <vstinner@python.org>
(cherry picked from commit 90130807d9)
Co-authored-by: Peter Bierma <zintensitydev@gmail.com>
Co-authored-by: Sergey B Kirpichev <skirpichev@gmail.com>
gh-130730: Fix multiprocessing test_active_children() (GH-130837)
Replace a sleep with an event: sleep is not a reliable
synchronization primitive.
(cherry picked from commit 3dd3675492)
Co-authored-by: Victor Stinner <vstinner@python.org>
gh-130737: Fix multiprocessing test_notify() (GH-130797)
Replace hardcoded delay (100 ms) with a loop awaiting until a
condition is true: replace assertReturnsIfImplemented() with
assertReachesEventually().
Use sleeping_retry() in assertReachesEventually() to tolerate slow
buildbots and raise an exception on timeout (30 seconds).
(cherry picked from commit 8a64a62002)
Co-authored-by: Victor Stinner <vstinner@python.org>
gh-130637: Add validation for numeric response data in `stat()` method (GH-130646)
(cherry picked from commit a42168d316)
Co-authored-by: Kanishk Pachauri <itskanishkp.py@gmail.com>
Co-authored-by: Eric V. Smith <ericvsmith@users.noreply.github.com>
Revert "gh-128364: Fix flaky `test_timeout` test (gh-130724)" (gh-130732)
Change broke Android and iOS buildbots that do not have multiprocessing.
This reverts commit cfa0b1dc37.
(cherry picked from commit 5221d9ce0e)
Co-authored-by: Sam Gross <colesbury@gmail.com>
Extend IPv6 tests and made little syntax refactoring
(cherry picked from commit 9f0879baf1)
Co-authored-by: Ilya Bazhenov <31971067+bazhil@users.noreply.github.com>
gh-129726: Break `gzip.GzipFile` reference loop (GH-130055)
A reference loop was resulting in the `fileobj` held by the `GzipFile`
being closed before the `GzipFile`.
The issue started with gh-89550 in 3.12, but was hidden in most cases
until 3.13 when gh-62948 made it more visible.
(cherry picked from commit 7f39137662)
Co-authored-by: Cody Maloney <cmaloney@users.noreply.github.com>
The use of PySys_GetObject() and _PySys_GetAttr(), which return a borrowed
reference, has been replaced by using one of the following functions, which
return a strong reference and distinguish a missing attribute from an error:
_PySys_GetOptionalAttr(), _PySys_GetOptionalAttrString(),
_PySys_GetRequiredAttr(), and _PySys_GetRequiredAttrString().
(cherry picked from commit 0ef4ffeefd)
(cherry picked from commit 7c1b76fce8)
(cherry picked from commit 2ab7e1135a)
gh-129363: Change regrtest sequential mode output (GH-129476)
First, write the test name without color. Then, write the test name
and the result with color. Each test is displayed twice.
(cherry picked from commit f1b81c408f)
Co-authored-by: Victor Stinner <vstinner@python.org>
Co-authored-by: Hugo van Kemenade <1324225+hugovk@users.noreply.github.com>
The `test_trace.test_coverage_ignore` test would fail if you had
`setuptools` installed, such as in `~/.local/lib/python3.xxx/site-packages/`.
Ignore everything in `sys.path` when running the test.
(cherry picked from commit 35925e9529)
gh-130250: use support.swap_attr() in test and don't assume we're beginning with a clean system state (GH-130342)
(cherry picked from commit 048ee2d5ec)
Co-authored-by: Irit Katriel <1055913+iritkatriel@users.noreply.github.com>
