Stowage/cpython
2
0
Fork 0
mirror of https://github.com/python/cpython.git synced 2025-10-31 13:41:24 +00:00
Code Issues Projects Releases Packages Wiki Activity
cpython/Doc/library/dis.rst
Mark Shannon 9cefcc0ee7
GH-120507: Lower the BEFORE_WITH and BEFORE_ASYNC_WITH instructions. (#120640) 
* Remove BEFORE_WITH and BEFORE_ASYNC_WITH instructions.

* Add LOAD_SPECIAL instruction

* Reimplement `with` and `async with` statements using LOAD_SPECIAL
2024-06-18 12:17:46 +01:00

1954 lines
58 KiB
ReStructuredText
Raw Blame History

:mod:`!dis` --- Disassembler for Python bytecode
================================================
.. module:: dis
:synopsis: Disassembler for Python bytecode.
**Source code:** :source:`Lib/dis.py`
.. testsetup::
import dis
def myfunc(alist):
return len(alist)
--------------
The :mod:`dis` module supports the analysis of CPython :term:`bytecode` by
disassembling it. The CPython bytecode which this module takes as an input is
defined in the file :file:`Include/opcode.h` and used by the compiler and the
interpreter.
.. impl-detail::
Bytecode is an implementation detail of the CPython interpreter. No
guarantees are made that bytecode will not be added, removed, or changed
between versions of Python. Use of this module should not be considered to
work across Python VMs or Python releases.
.. versionchanged:: 3.6
Use 2 bytes for each instruction. Previously the number of bytes varied
by instruction.
.. versionchanged:: 3.10
The argument of jump, exception handling and loop instructions is now
the instruction offset rather than the byte offset.
.. versionchanged:: 3.11
Some instructions are accompanied by one or more inline cache entries,
which take the form of :opcode:`CACHE` instructions. These instructions
are hidden by default, but can be shown by passing ``show_caches=True`` to
any :mod:`dis` utility. Furthermore, the interpreter now adapts the
bytecode to specialize it for different runtime conditions. The
adaptive bytecode can be shown by passing ``adaptive=True``.
.. versionchanged:: 3.12
The argument of a jump is the offset of the target instruction relative
to the instruction that appears immediately after the jump instruction's
:opcode:`CACHE` entries.
As a consequence, the presence of the :opcode:`CACHE` instructions is
transparent for forward jumps but needs to be taken into account when
reasoning about backward jumps.
.. versionchanged:: 3.13
The output shows logical labels rather than instruction offsets
for jump targets and exception handlers. The ``-O`` command line
option and the ``show_offsets`` argument were added.
Example: Given the function :func:`!myfunc`::
def myfunc(alist):
return len(alist)
the following command can be used to display the disassembly of
:func:`!myfunc`:
.. doctest::
>>> dis.dis(myfunc)
2 RESUME 0
<BLANKLINE>
3 LOAD_GLOBAL 1 (len + NULL)
LOAD_FAST 0 (alist)
CALL 1
RETURN_VALUE
(The "2" is a line number).
.. _dis-cli:
Command-line interface
----------------------
The :mod:`dis` module can be invoked as a script from the command line:
.. code-block:: sh
python -m dis [-h] [-C] [-O] [infile]
The following options are accepted:
.. program:: dis
.. cmdoption:: -h, --help
Display usage and exit.
.. cmdoption:: -C, --show-caches
Show inline caches.
.. cmdoption:: -O, --show-offsets
Show offsets of instructions.
If :file:`infile` is specified, its disassembled code will be written to stdout.
Otherwise, disassembly is performed on compiled source code received from stdin.
Bytecode analysis
-----------------
.. versionadded:: 3.4
The bytecode analysis API allows pieces of Python code to be wrapped in a
:class:`Bytecode` object that provides easy access to details of the compiled
code.
.. class:: Bytecode(x, *, first_line=None, current_offset=None,\
show_caches=False, adaptive=False, show_offsets=False)
Analyse the bytecode corresponding to a function, generator, asynchronous
generator, coroutine, method, string of source code, or a code object (as
returned by :func:`compile`).
This is a convenience wrapper around many of the functions listed below, most
notably :func:`get_instructions`, as iterating over a :class:`Bytecode`
instance yields the bytecode operations as :class:`Instruction` instances.
If *first_line* is not ``None``, it indicates the line number that should be
reported for the first source line in the disassembled code. Otherwise, the
source line information (if any) is taken directly from the disassembled code
object.
If *current_offset* is not ``None``, it refers to an instruction offset in the
disassembled code. Setting this means :meth:`.dis` will display a "current
instruction" marker against the specified opcode.
If *show_caches* is ``True``, :meth:`.dis` will display inline cache
entries used by the interpreter to specialize the bytecode.
If *adaptive* is ``True``, :meth:`.dis` will display specialized bytecode
that may be different from the original bytecode.
If *show_offsets* is ``True``, :meth:`.dis` will include instruction
offsets in the output.
.. classmethod:: from_traceback(tb, *, show_caches=False)
Construct a :class:`Bytecode` instance from the given traceback, setting
*current_offset* to the instruction responsible for the exception.
.. data:: codeobj
The compiled code object.
.. data:: first_line
The first source line of the code object (if available)
.. method:: dis()
Return a formatted view of the bytecode operations (the same as printed by
:func:`dis.dis`, but returned as a multi-line string).
.. method:: info()
Return a formatted multi-line string with detailed information about the
code object, like :func:`code_info`.
.. versionchanged:: 3.7
This can now handle coroutine and asynchronous generator objects.
.. versionchanged:: 3.11
Added the *show_caches* and *adaptive* parameters.
Example:
.. doctest::
>>> bytecode = dis.Bytecode(myfunc)
>>> for instr in bytecode:
... print(instr.opname)
...
RESUME
LOAD_GLOBAL
LOAD_FAST
CALL
RETURN_VALUE
Analysis functions
------------------
The :mod:`dis` module also defines the following analysis functions that convert
the input directly to the desired output. They can be useful if only a single
operation is being performed, so the intermediate analysis object isn't useful:
.. function:: code_info(x)
Return a formatted multi-line string with detailed code object information
for the supplied function, generator, asynchronous generator, coroutine,
method, source code string or code object.
Note that the exact contents of code info strings are highly implementation
dependent and they may change arbitrarily across Python VMs or Python
releases.
.. versionadded:: 3.2
.. versionchanged:: 3.7
This can now handle coroutine and asynchronous generator objects.
.. function:: show_code(x, *, file=None)
Print detailed code object information for the supplied function, method,
source code string or code object to *file* (or ``sys.stdout`` if *file*
is not specified).
This is a convenient shorthand for ``print(code_info(x), file=file)``,
intended for interactive exploration at the interpreter prompt.
.. versionadded:: 3.2
.. versionchanged:: 3.4
Added *file* parameter.
.. function:: dis(x=None, *, file=None, depth=None, show_caches=False, adaptive=False)
Disassemble the *x* object. *x* can denote either a module, a class, a
method, a function, a generator, an asynchronous generator, a coroutine,
a code object, a string of source code or a byte sequence of raw bytecode.
For a module, it disassembles all functions. For a class, it disassembles
all methods (including class and static methods). For a code object or
sequence of raw bytecode, it prints one line per bytecode instruction.
It also recursively disassembles nested code objects. These can include
generator expressions, nested functions, the bodies of nested classes,
and the code objects used for :ref:`annotation scopes <annotation-scopes>`.
Strings are first compiled to code objects with the :func:`compile`
built-in function before being disassembled. If no object is provided, this
function disassembles the last traceback.
The disassembly is written as text to the supplied *file* argument if
provided and to ``sys.stdout`` otherwise.
The maximal depth of recursion is limited by *depth* unless it is ``None``.
``depth=0`` means no recursion.
If *show_caches* is ``True``, this function will display inline cache
entries used by the interpreter to specialize the bytecode.
If *adaptive* is ``True``, this function will display specialized bytecode
that may be different from the original bytecode.
.. versionchanged:: 3.4
Added *file* parameter.
.. versionchanged:: 3.7
Implemented recursive disassembling and added *depth* parameter.
.. versionchanged:: 3.7
This can now handle coroutine and asynchronous generator objects.
.. versionchanged:: 3.11
Added the *show_caches* and *adaptive* parameters.
.. function:: distb(tb=None, *, file=None, show_caches=False, adaptive=False,
show_offset=False)
Disassemble the top-of-stack function of a traceback, using the last
traceback if none was passed. The instruction causing the exception is
indicated.
The disassembly is written as text to the supplied *file* argument if
provided and to ``sys.stdout`` otherwise.
.. versionchanged:: 3.4
Added *file* parameter.
.. versionchanged:: 3.11
Added the *show_caches* and *adaptive* parameters.
.. versionchanged:: 3.13
Added the *show_offsets* parameter.
.. function:: disassemble(code, lasti=-1, *, file=None, show_caches=False, adaptive=False)
disco(code, lasti=-1, *, file=None, show_caches=False, adaptive=False,
show_offsets=False)
Disassemble a code object, indicating the last instruction if *lasti* was
provided. The output is divided in the following columns:
#. the line number, for the first instruction of each line
#. the current instruction, indicated as ``-->``,
#. a labelled instruction, indicated with ``>>``,
#. the address of the instruction,
#. the operation code name,
#. operation parameters, and
#. interpretation of the parameters in parentheses.
The parameter interpretation recognizes local and global variable names,
constant values, branch targets, and compare operators.
The disassembly is written as text to the supplied *file* argument if
provided and to ``sys.stdout`` otherwise.
.. versionchanged:: 3.4
Added *file* parameter.
.. versionchanged:: 3.11
Added the *show_caches* and *adaptive* parameters.
.. versionchanged:: 3.13
Added the *show_offsets* parameter.
.. function:: get_instructions(x, *, first_line=None, show_caches=False, adaptive=False)
Return an iterator over the instructions in the supplied function, method,
source code string or code object.
The iterator generates a series of :class:`Instruction` named tuples giving
the details of each operation in the supplied code.
If *first_line* is not ``None``, it indicates the line number that should be
reported for the first source line in the disassembled code. Otherwise, the
source line information (if any) is taken directly from the disassembled code
object.
The *adaptive* parameter works as it does in :func:`dis`.
.. versionadded:: 3.4
.. versionchanged:: 3.11
Added the *show_caches* and *adaptive* parameters.
.. versionchanged:: 3.13
The *show_caches* parameter is deprecated and has no effect. The iterator
generates the :class:`Instruction` instances with the *cache_info*
field populated (regardless of the value of *show_caches*) and it no longer
generates separate items for the cache entries.
.. function:: findlinestarts(code)
This generator function uses the :meth:`~codeobject.co_lines` method
of the :ref:`code object <code-objects>` *code* to find the offsets which
are starts of
lines in the source code. They are generated as ``(offset, lineno)`` pairs.
.. versionchanged:: 3.6
Line numbers can be decreasing. Before, they were always increasing.
.. versionchanged:: 3.10
The :pep:`626` :meth:`~codeobject.co_lines` method is used instead of the
:attr:`~codeobject.co_firstlineno` and :attr:`~codeobject.co_lnotab`
attributes of the :ref:`code object <code-objects>`.
.. versionchanged:: 3.13
Line numbers can be ``None`` for bytecode that does not map to source lines.
.. function:: findlabels(code)
Detect all offsets in the raw compiled bytecode string *code* which are jump targets, and
return a list of these offsets.
.. function:: stack_effect(opcode, oparg=None, *, jump=None)
Compute the stack effect of *opcode* with argument *oparg*.
If the code has a jump target and *jump* is ``True``, :func:`~stack_effect`
will return the stack effect of jumping. If *jump* is ``False``,
it will return the stack effect of not jumping. And if *jump* is
``None`` (default), it will return the maximal stack effect of both cases.
.. versionadded:: 3.4
.. versionchanged:: 3.8
Added *jump* parameter.
.. versionchanged:: 3.13
If ``oparg`` is omitted (or ``None``), the stack effect is now returned
for ``oparg=0``. Previously this was an error for opcodes that use their
arg. It is also no longer an error to pass an integer ``oparg`` when
the ``opcode`` does not use it; the ``oparg`` in this case is ignored.
.. _bytecodes:
Python Bytecode Instructions
----------------------------
The :func:`get_instructions` function and :class:`Bytecode` class provide
details of bytecode instructions as :class:`Instruction` instances:
.. class:: Instruction
Details for a bytecode operation
.. data:: opcode
numeric code for operation, corresponding to the opcode values listed
below and the bytecode values in the :ref:`opcode_collections`.
.. data:: opname
human readable name for operation
.. data:: baseopcode
numeric code for the base operation if operation is specialized;
otherwise equal to :data:`opcode`
.. data:: baseopname
human readable name for the base operation if operation is specialized;
otherwise equal to :data:`opname`
.. data:: arg
numeric argument to operation (if any), otherwise ``None``
.. data:: oparg
alias for :data:`arg`
.. data:: argval
resolved arg value (if any), otherwise ``None``
.. data:: argrepr
human readable description of operation argument (if any),
otherwise an empty string.
.. data:: offset
start index of operation within bytecode sequence
.. data:: start_offset
start index of operation within bytecode sequence, including prefixed
``EXTENDED_ARG`` operations if present; otherwise equal to :data:`offset`
.. data:: cache_offset
start index of the cache entries following the operation
.. data:: end_offset
end index of the cache entries following the operation
.. data:: starts_line
``True`` if this opcode starts a source line, otherwise ``False``
.. data:: line_number
source line number associated with this opcode (if any), otherwise ``None``
.. data:: is_jump_target
``True`` if other code jumps to here, otherwise ``False``
.. data:: jump_target
bytecode index of the jump target if this is a jump operation,
otherwise ``None``
.. data:: positions
:class:`dis.Positions` object holding the
start and end locations that are covered by this instruction.
.. data::cache_info
Information about the cache entries of this instruction, as
triplets of the form ``(name, size, data)``, where the ``name``
and ``size`` describe the cache format and data is the contents
of the cache. ``cache_info`` is ``None`` if the instruction does not have
caches.
.. versionadded:: 3.4
.. versionchanged:: 3.11
Field ``positions`` is added.
.. versionchanged:: 3.13
Changed field ``starts_line``.
Added fields ``start_offset``, ``cache_offset``, ``end_offset``,
``baseopname``, ``baseopcode``, ``jump_target``, ``oparg``,
``line_number`` and ``cache_info``.
.. class:: Positions
In case the information is not available, some fields might be ``None``.
.. data:: lineno
.. data:: end_lineno
.. data:: col_offset
.. data:: end_col_offset
.. versionadded:: 3.11
The Python compiler currently generates the following bytecode instructions.
**General instructions**
In the following, We will refer to the interpreter stack as ``STACK`` and describe
operations on it as if it was a Python list. The top of the stack corresponds to
``STACK[-1]`` in this language.
.. opcode:: NOP
Do nothing code. Used as a placeholder by the bytecode optimizer, and to
generate line tracing events.
.. opcode:: POP_TOP
Removes the top-of-stack item::
STACK.pop()
.. opcode:: END_FOR
Removes the top-of-stack item.
Equivalent to ``POP_TOP``.
Used to clean up at the end of loops, hence the name.
.. versionadded:: 3.12
.. opcode:: END_SEND
Implements ``del STACK[-2]``.
Used to clean up when a generator exits.
.. versionadded:: 3.12
.. opcode:: COPY (i)
Push the i-th item to the top of the stack without removing it from its original
location::
assert i > 0
STACK.append(STACK[-i])
.. versionadded:: 3.11
.. opcode:: SWAP (i)
Swap the top of the stack with the i-th element::
STACK[-i], STACK[-1] = STACK[-1], STACK[-i]
.. versionadded:: 3.11
.. opcode:: CACHE
Rather than being an actual instruction, this opcode is used to mark extra
space for the interpreter to cache useful data directly in the bytecode
itself. It is automatically hidden by all ``dis`` utilities, but can be
viewed with ``show_caches=True``.
Logically, this space is part of the preceding instruction. Many opcodes
expect to be followed by an exact number of caches, and will instruct the
interpreter to skip over them at runtime.
Populated caches can look like arbitrary instructions, so great care should
be taken when reading or modifying raw, adaptive bytecode containing
quickened data.
.. versionadded:: 3.11
**Unary operations**
Unary operations take the top of the stack, apply the operation, and push the
result back on the stack.
.. opcode:: UNARY_NEGATIVE
Implements ``STACK[-1] = -STACK[-1]``.
.. opcode:: UNARY_NOT
Implements ``STACK[-1] = not STACK[-1]``.
.. versionchanged:: 3.13
This instruction now requires an exact :class:`bool` operand.
.. opcode:: UNARY_INVERT
Implements ``STACK[-1] = ~STACK[-1]``.
.. opcode:: GET_ITER
Implements ``STACK[-1] = iter(STACK[-1])``.
.. opcode:: GET_YIELD_FROM_ITER
If ``STACK[-1]`` is a :term:`generator iterator` or :term:`coroutine` object
it is left as is. Otherwise, implements ``STACK[-1] = iter(STACK[-1])``.
.. versionadded:: 3.5
.. opcode:: TO_BOOL
Implements ``STACK[-1] = bool(STACK[-1])``.
.. versionadded:: 3.13
**Binary and in-place operations**
Binary operations remove the top two items from the stack (``STACK[-1]`` and
``STACK[-2]``). They perform the operation, then put the result back on the stack.
In-place operations are like binary operations, but the operation is done in-place
when ``STACK[-2]`` supports it, and the resulting ``STACK[-1]`` may be (but does
not have to be) the original ``STACK[-2]``.
.. opcode:: BINARY_OP (op)
Implements the binary and in-place operators (depending on the value of
*op*)::
rhs = STACK.pop()
lhs = STACK.pop()
STACK.append(lhs op rhs)
.. versionadded:: 3.11
.. opcode:: BINARY_SUBSCR
Implements::
key = STACK.pop()
container = STACK.pop()
STACK.append(container[key])
.. opcode:: STORE_SUBSCR
Implements::
key = STACK.pop()
container = STACK.pop()
value = STACK.pop()
container[key] = value
.. opcode:: DELETE_SUBSCR
Implements::
key = STACK.pop()
container = STACK.pop()
del container[key]
.. opcode:: BINARY_SLICE
Implements::
end = STACK.pop()
start = STACK.pop()
container = STACK.pop()
STACK.append(container[start:end])
.. versionadded:: 3.12
.. opcode:: STORE_SLICE
Implements::
end = STACK.pop()
start = STACK.pop()
container = STACK.pop()
values = STACK.pop()
container[start:end] = value
.. versionadded:: 3.12
**Coroutine opcodes**
.. opcode:: GET_AWAITABLE (where)
Implements ``STACK[-1] = get_awaitable(STACK[-1])``, where ``get_awaitable(o)``
returns ``o`` if ``o`` is a coroutine object or a generator object with
the :data:`~inspect.CO_ITERABLE_COROUTINE` flag, or resolves
``o.__await__``.
If the ``where`` operand is nonzero, it indicates where the instruction
occurs:
* ``1``: After a call to ``__aenter__``
* ``2``: After a call to ``__aexit__``
.. versionadded:: 3.5
.. versionchanged:: 3.11
Previously, this instruction did not have an oparg.
.. opcode:: GET_AITER
Implements ``STACK[-1] = STACK[-1].__aiter__()``.
.. versionadded:: 3.5
.. versionchanged:: 3.7
Returning awaitable objects from ``__aiter__`` is no longer
supported.
.. opcode:: GET_ANEXT
Implement ``STACK.append(get_awaitable(STACK[-1].__anext__()))`` to the stack.
See ``GET_AWAITABLE`` for details about ``get_awaitable``.
.. versionadded:: 3.5
.. opcode:: END_ASYNC_FOR
Terminates an :keyword:`async for` loop. Handles an exception raised
when awaiting a next item. The stack contains the async iterable in
``STACK[-2]`` and the raised exception in ``STACK[-1]``. Both are popped.
If the exception is not :exc:`StopAsyncIteration`, it is re-raised.
.. versionadded:: 3.8
.. versionchanged:: 3.11
Exception representation on the stack now consist of one, not three, items.
.. opcode:: CLEANUP_THROW
Handles an exception raised during a :meth:`~generator.throw` or
:meth:`~generator.close` call through the current frame. If ``STACK[-1]`` is an
instance of :exc:`StopIteration`, pop three values from the stack and push
its ``value`` member. Otherwise, re-raise ``STACK[-1]``.
.. versionadded:: 3.12
**Miscellaneous opcodes**
.. opcode:: SET_ADD (i)
Implements::
item = STACK.pop()
set.add(STACK[-i], item)
Used to implement set comprehensions.
.. opcode:: LIST_APPEND (i)
Implements::
item = STACK.pop()
list.append(STACK[-i], item)
Used to implement list comprehensions.
.. opcode:: MAP_ADD (i)
Implements::
value = STACK.pop()
key = STACK.pop()
dict.__setitem__(STACK[-i], key, value)
Used to implement dict comprehensions.
.. versionadded:: 3.1
.. versionchanged:: 3.8
Map value is ``STACK[-1]`` and map key is ``STACK[-2]``. Before, those
were reversed.
For all of the :opcode:`SET_ADD`, :opcode:`LIST_APPEND` and :opcode:`MAP_ADD`
instructions, while the added value or key/value pair is popped off, the
container object remains on the stack so that it is available for further
iterations of the loop.
.. opcode:: RETURN_VALUE
Returns with ``STACK[-1]`` to the caller of the function.
.. opcode:: RETURN_CONST (consti)
Returns with ``co_consts[consti]`` to the caller of the function.
.. versionadded:: 3.12
.. opcode:: YIELD_VALUE
Yields ``STACK.pop()`` from a :term:`generator`.
.. versionchanged:: 3.11
oparg set to be the stack depth.
.. versionchanged:: 3.12
oparg set to be the exception block depth, for efficient closing of generators.
.. versionchanged:: 3.13
oparg is ``1`` if this instruction is part of a yield-from or await, and ``0``
otherwise.
.. opcode:: SETUP_ANNOTATIONS
Checks whether ``__annotations__`` is defined in ``locals()``, if not it is
set up to an empty ``dict``. This opcode is only emitted if a class
or module body contains :term:`variable annotations <variable annotation>`
statically.
.. versionadded:: 3.6
.. opcode:: POP_EXCEPT
Pops a value from the stack, which is used to restore the exception state.
.. versionchanged:: 3.11
Exception representation on the stack now consist of one, not three, items.
.. opcode:: RERAISE
Re-raises the exception currently on top of the stack. If oparg is non-zero,
pops an additional value from the stack which is used to set
:attr:`~frame.f_lasti` of the current frame.
.. versionadded:: 3.9
.. versionchanged:: 3.11
Exception representation on the stack now consist of one, not three, items.
.. opcode:: PUSH_EXC_INFO
Pops a value from the stack. Pushes the current exception to the top of the stack.
Pushes the value originally popped back to the stack.
Used in exception handlers.
.. versionadded:: 3.11
.. opcode:: CHECK_EXC_MATCH
Performs exception matching for ``except``. Tests whether the ``STACK[-2]``
is an exception matching ``STACK[-1]``. Pops ``STACK[-1]`` and pushes the boolean
result of the test.
.. versionadded:: 3.11
.. opcode:: CHECK_EG_MATCH
Performs exception matching for ``except*``. Applies ``split(STACK[-1])`` on
the exception group representing ``STACK[-2]``.
In case of a match, pops two items from the stack and pushes the
non-matching subgroup (``None`` in case of full match) followed by the
matching subgroup. When there is no match, pops one item (the match
type) and pushes ``None``.
.. versionadded:: 3.11
.. opcode:: WITH_EXCEPT_START
Calls the function in position 4 on the stack with arguments (type, val, tb)
representing the exception at the top of the stack.
Used to implement the call ``context_manager.__exit__(*exc_info())`` when an exception
has occurred in a :keyword:`with` statement.
.. versionadded:: 3.9
.. versionchanged:: 3.11
The ``__exit__`` function is in position 4 of the stack rather than 7.
Exception representation on the stack now consist of one, not three, items.
.. opcode:: LOAD_COMMON_CONSTANT
Pushes a common constant onto the stack. The interpreter contains a hardcoded
list of constants supported by this instruction. Used by the :keyword:`assert`
statement to load :exc:`AssertionError`.
.. versionadded:: 3.14
.. opcode:: LOAD_BUILD_CLASS
Pushes :func:`!builtins.__build_class__` onto the stack. It is later called
to construct a class.
.. opcode:: GET_LEN
Perform ``STACK.append(len(STACK[-1]))``.
.. versionadded:: 3.10
.. opcode:: MATCH_MAPPING
If ``STACK[-1]`` is an instance of :class:`collections.abc.Mapping` (or, more
technically: if it has the :c:macro:`Py_TPFLAGS_MAPPING` flag set in its
:c:member:`~PyTypeObject.tp_flags`), push ``True`` onto the stack. Otherwise,
push ``False``.
.. versionadded:: 3.10
.. opcode:: MATCH_SEQUENCE
If ``STACK[-1]`` is an instance of :class:`collections.abc.Sequence` and is *not* an instance
of :class:`str`/:class:`bytes`/:class:`bytearray` (or, more technically: if it has
the :c:macro:`Py_TPFLAGS_SEQUENCE` flag set in its :c:member:`~PyTypeObject.tp_flags`),
push ``True`` onto the stack. Otherwise, push ``False``.
.. versionadded:: 3.10
.. opcode:: MATCH_KEYS
``STACK[-1]`` is a tuple of mapping keys, and ``STACK[-2]`` is the match subject.
If ``STACK[-2]`` contains all of the keys in ``STACK[-1]``, push a :class:`tuple`
containing the corresponding values. Otherwise, push ``None``.
.. versionadded:: 3.10
.. versionchanged:: 3.11
Previously, this instruction also pushed a boolean value indicating
success (``True``) or failure (``False``).
.. opcode:: STORE_NAME (namei)
Implements ``name = STACK.pop()``. *namei* is the index of *name* in the attribute
:attr:`~codeobject.co_names` of the :ref:`code object <code-objects>`.
The compiler tries to use :opcode:`STORE_FAST` or :opcode:`STORE_GLOBAL` if possible.
.. opcode:: DELETE_NAME (namei)
Implements ``del name``, where *namei* is the index into :attr:`~codeobject.co_names`
attribute of the :ref:`code object <code-objects>`.
.. opcode:: UNPACK_SEQUENCE (count)
Unpacks ``STACK[-1]`` into *count* individual values, which are put onto the stack
right-to-left. Require there to be exactly *count* values.::
assert(len(STACK[-1]) == count)
STACK.extend(STACK.pop()[:-count-1:-1])
.. opcode:: UNPACK_EX (counts)
Implements assignment with a starred target: Unpacks an iterable in ``STACK[-1]``
into individual values, where the total number of values can be smaller than the
number of items in the iterable: one of the new values will be a list of all
leftover items.
The number of values before and after the list value is limited to 255.
The number of values before the list value is encoded in the argument of the
opcode. The number of values after the list if any is encoded using an
``EXTENDED_ARG``. As a consequence, the argument can be seen as a two bytes values
where the low byte of *counts* is the number of values before the list value, the
high byte of *counts* the number of values after it.
The extracted values are put onto the stack right-to-left, i.e. ``a, *b, c = d``
will be stored after execution as ``STACK.extend((a, b, c))``.
.. opcode:: STORE_ATTR (namei)
Implements::
obj = STACK.pop()
value = STACK.pop()
obj.name = value
where *namei* is the index of name in :attr:`~codeobject.co_names` of the
:ref:`code object <code-objects>`.
.. opcode:: DELETE_ATTR (namei)
Implements::
obj = STACK.pop()
del obj.name
where *namei* is the index of name into :attr:`~codeobject.co_names` of the
:ref:`code object <code-objects>`.
.. opcode:: STORE_GLOBAL (namei)
Works as :opcode:`STORE_NAME`, but stores the name as a global.
.. opcode:: DELETE_GLOBAL (namei)
Works as :opcode:`DELETE_NAME`, but deletes a global name.
.. opcode:: LOAD_CONST (consti)
Pushes ``co_consts[consti]`` onto the stack.
.. opcode:: LOAD_NAME (namei)
Pushes the value associated with ``co_names[namei]`` onto the stack.
The name is looked up within the locals, then the globals, then the builtins.
.. opcode:: LOAD_LOCALS
Pushes a reference to the locals dictionary onto the stack. This is used
to prepare namespace dictionaries for :opcode:`LOAD_FROM_DICT_OR_DEREF`
and :opcode:`LOAD_FROM_DICT_OR_GLOBALS`.
.. versionadded:: 3.12
.. opcode:: LOAD_FROM_DICT_OR_GLOBALS (i)
Pops a mapping off the stack and looks up the value for ``co_names[namei]``.
If the name is not found there, looks it up in the globals and then the builtins,
similar to :opcode:`LOAD_GLOBAL`.
This is used for loading global variables in
:ref:`annotation scopes <annotation-scopes>` within class bodies.
.. versionadded:: 3.12
.. opcode:: BUILD_TUPLE (count)
Creates a tuple consuming *count* items from the stack, and pushes the
resulting tuple onto the stack.::
assert count > 0
STACK, values = STACK[:-count], STACK[-count:]
STACK.append(tuple(values))
.. opcode:: BUILD_LIST (count)
Works as :opcode:`BUILD_TUPLE`, but creates a list.
.. opcode:: BUILD_SET (count)
Works as :opcode:`BUILD_TUPLE`, but creates a set.
.. opcode:: BUILD_MAP (count)
Pushes a new dictionary object onto the stack. Pops ``2 * count`` items
so that the dictionary holds *count* entries:
``{..., STACK[-4]: STACK[-3], STACK[-2]: STACK[-1]}``.
.. versionchanged:: 3.5
The dictionary is created from stack items instead of creating an
empty dictionary pre-sized to hold *count* items.
.. opcode:: BUILD_CONST_KEY_MAP (count)
The version of :opcode:`BUILD_MAP` specialized for constant keys. Pops the
top element on the stack which contains a tuple of keys, then starting from
``STACK[-2]``, pops *count* values to form values in the built dictionary.
.. versionadded:: 3.6
.. opcode:: BUILD_STRING (count)
Concatenates *count* strings from the stack and pushes the resulting string
onto the stack.
.. versionadded:: 3.6
.. opcode:: LIST_EXTEND (i)
Implements::
seq = STACK.pop()
list.extend(STACK[-i], seq)
Used to build lists.
.. versionadded:: 3.9
.. opcode:: SET_UPDATE (i)
Implements::
seq = STACK.pop()
set.update(STACK[-i], seq)
Used to build sets.
.. versionadded:: 3.9
.. opcode:: DICT_UPDATE (i)
Implements::
map = STACK.pop()
dict.update(STACK[-i], map)
Used to build dicts.
.. versionadded:: 3.9
.. opcode:: DICT_MERGE (i)
Like :opcode:`DICT_UPDATE` but raises an exception for duplicate keys.
.. versionadded:: 3.9
.. opcode:: LOAD_ATTR (namei)
If the low bit of ``namei`` is not set, this replaces ``STACK[-1]`` with
``getattr(STACK[-1], co_names[namei>>1])``.
If the low bit of ``namei`` is set, this will attempt to load a method named
``co_names[namei>>1]`` from the ``STACK[-1]`` object. ``STACK[-1]`` is popped.
This bytecode distinguishes two cases: if ``STACK[-1]`` has a method with the
correct name, the bytecode pushes the unbound method and ``STACK[-1]``.
``STACK[-1]`` will be used as the first argument (``self``) by :opcode:`CALL`
or :opcode:`CALL_KW` when calling the unbound method.
Otherwise, ``NULL`` and the object returned by
the attribute lookup are pushed.
.. versionchanged:: 3.12
If the low bit of ``namei`` is set, then a ``NULL`` or ``self`` is
pushed to the stack before the attribute or unbound method respectively.
.. opcode:: LOAD_SUPER_ATTR (namei)
This opcode implements :func:`super`, both in its zero-argument and
two-argument forms (e.g. ``super().method()``, ``super().attr`` and
``super(cls, self).method()``, ``super(cls, self).attr``).
It pops three values from the stack (from top of stack down):
* ``self``: the first argument to the current method
* ``cls``: the class within which the current method was defined
* the global ``super``
With respect to its argument, it works similarly to :opcode:`LOAD_ATTR`,
except that ``namei`` is shifted left by 2 bits instead of 1.
The low bit of ``namei`` signals to attempt a method load, as with
:opcode:`LOAD_ATTR`, which results in pushing ``NULL`` and the loaded method.
When it is unset a single value is pushed to the stack.
The second-low bit of ``namei``, if set, means that this was a two-argument
call to :func:`super` (unset means zero-argument).
.. versionadded:: 3.12
.. opcode:: COMPARE_OP (opname)
Performs a Boolean operation. The operation name can be found in
``cmp_op[opname >> 5]``. If the fifth-lowest bit of ``opname`` is set
(``opname & 16``), the result should be coerced to ``bool``.
.. versionchanged:: 3.13
The fifth-lowest bit of the oparg now indicates a forced conversion to
:class:`bool`.
.. opcode:: IS_OP (invert)
Performs ``is`` comparison, or ``is not`` if ``invert`` is 1.
.. versionadded:: 3.9
.. opcode:: CONTAINS_OP (invert)
Performs ``in`` comparison, or ``not in`` if ``invert`` is 1.
.. versionadded:: 3.9
.. opcode:: IMPORT_NAME (namei)
Imports the module ``co_names[namei]``. ``STACK[-1]`` and ``STACK[-2]`` are
popped and provide the *fromlist* and *level* arguments of :func:`__import__`.
The module object is pushed onto the stack. The current namespace is not affected: for a proper import statement, a subsequent :opcode:`STORE_FAST` instruction
modifies the namespace.
.. opcode:: IMPORT_FROM (namei)
Loads the attribute ``co_names[namei]`` from the module found in ``STACK[-1]``.
The resulting object is pushed onto the stack, to be subsequently stored by a
:opcode:`STORE_FAST` instruction.
.. opcode:: JUMP_FORWARD (delta)
Increments bytecode counter by *delta*.
.. opcode:: JUMP_BACKWARD (delta)
Decrements bytecode counter by *delta*. Checks for interrupts.
.. versionadded:: 3.11
.. opcode:: JUMP_BACKWARD_NO_INTERRUPT (delta)
Decrements bytecode counter by *delta*. Does not check for interrupts.
.. versionadded:: 3.11
.. opcode:: POP_JUMP_IF_TRUE (delta)
If ``STACK[-1]`` is true, increments the bytecode counter by *delta*.
``STACK[-1]`` is popped.
.. versionchanged:: 3.11
The oparg is now a relative delta rather than an absolute target.
This opcode is a pseudo-instruction, replaced in final bytecode by
the directed versions (forward/backward).
.. versionchanged:: 3.12
This is no longer a pseudo-instruction.
.. versionchanged:: 3.13
This instruction now requires an exact :class:`bool` operand.
.. opcode:: POP_JUMP_IF_FALSE (delta)
If ``STACK[-1]`` is false, increments the bytecode counter by *delta*.
``STACK[-1]`` is popped.
.. versionchanged:: 3.11
The oparg is now a relative delta rather than an absolute target.
This opcode is a pseudo-instruction, replaced in final bytecode by
the directed versions (forward/backward).
.. versionchanged:: 3.12
This is no longer a pseudo-instruction.
.. versionchanged:: 3.13
This instruction now requires an exact :class:`bool` operand.
.. opcode:: POP_JUMP_IF_NOT_NONE (delta)
If ``STACK[-1]`` is not ``None``, increments the bytecode counter by *delta*.
``STACK[-1]`` is popped.
This opcode is a pseudo-instruction, replaced in final bytecode by
the directed versions (forward/backward).
.. versionadded:: 3.11
.. versionchanged:: 3.12
This is no longer a pseudo-instruction.
.. opcode:: POP_JUMP_IF_NONE (delta)
If ``STACK[-1]`` is ``None``, increments the bytecode counter by *delta*.
``STACK[-1]`` is popped.
This opcode is a pseudo-instruction, replaced in final bytecode by
the directed versions (forward/backward).
.. versionadded:: 3.11
.. versionchanged:: 3.12
This is no longer a pseudo-instruction.
.. opcode:: FOR_ITER (delta)
``STACK[-1]`` is an :term:`iterator`. Call its :meth:`~iterator.__next__` method.
If this yields a new value, push it on the stack (leaving the iterator below
it). If the iterator indicates it is exhausted then the byte code counter is
incremented by *delta*.
.. versionchanged:: 3.12
Up until 3.11 the iterator was popped when it was exhausted.
.. opcode:: LOAD_GLOBAL (namei)
Loads the global named ``co_names[namei>>1]`` onto the stack.
.. versionchanged:: 3.11
If the low bit of ``namei`` is set, then a ``NULL`` is pushed to the
stack before the global variable.
.. opcode:: LOAD_FAST (var_num)
Pushes a reference to the local ``co_varnames[var_num]`` onto the stack.
.. versionchanged:: 3.12
This opcode is now only used in situations where the local variable is
guaranteed to be initialized. It cannot raise :exc:`UnboundLocalError`.
.. opcode:: LOAD_FAST_CHECK (var_num)
Pushes a reference to the local ``co_varnames[var_num]`` onto the stack,
raising an :exc:`UnboundLocalError` if the local variable has not been
initialized.
.. versionadded:: 3.12
.. opcode:: LOAD_FAST_AND_CLEAR (var_num)
Pushes a reference to the local ``co_varnames[var_num]`` onto the stack (or
pushes ``NULL`` onto the stack if the local variable has not been
initialized) and sets ``co_varnames[var_num]`` to ``NULL``.
.. versionadded:: 3.12
.. opcode:: STORE_FAST (var_num)
Stores ``STACK.pop()`` into the local ``co_varnames[var_num]``.
.. opcode:: DELETE_FAST (var_num)
Deletes local ``co_varnames[var_num]``.
.. opcode:: MAKE_CELL (i)
Creates a new cell in slot ``i``. If that slot is nonempty then
that value is stored into the new cell.
.. versionadded:: 3.11
.. opcode:: LOAD_DEREF (i)
Loads the cell contained in slot ``i`` of the "fast locals" storage.
Pushes a reference to the object the cell contains on the stack.
.. versionchanged:: 3.11
``i`` is no longer offset by the length of :attr:`~codeobject.co_varnames`.
.. opcode:: LOAD_FROM_DICT_OR_DEREF (i)
Pops a mapping off the stack and looks up the name associated with
slot ``i`` of the "fast locals" storage in this mapping.
If the name is not found there, loads it from the cell contained in
slot ``i``, similar to :opcode:`LOAD_DEREF`. This is used for loading
free variables in class bodies (which previously used
:opcode:`!LOAD_CLASSDEREF`) and in
:ref:`annotation scopes <annotation-scopes>` within class bodies.
.. versionadded:: 3.12
.. opcode:: STORE_DEREF (i)
Stores ``STACK.pop()`` into the cell contained in slot ``i`` of the "fast locals"
storage.
.. versionchanged:: 3.11
``i`` is no longer offset by the length of :attr:`~codeobject.co_varnames`.
.. opcode:: DELETE_DEREF (i)
Empties the cell contained in slot ``i`` of the "fast locals" storage.
Used by the :keyword:`del` statement.
.. versionadded:: 3.2
.. versionchanged:: 3.11
``i`` is no longer offset by the length of :attr:`~codeobject.co_varnames`.
.. opcode:: COPY_FREE_VARS (n)
Copies the ``n`` free variables from the closure into the frame.
Removes the need for special code on the caller's side when calling
closures.
.. versionadded:: 3.11
.. opcode:: RAISE_VARARGS (argc)
Raises an exception using one of the 3 forms of the ``raise`` statement,
depending on the value of *argc*:
* 0: ``raise`` (re-raise previous exception)
* 1: ``raise STACK[-1]`` (raise exception instance or type at ``STACK[-1]``)
* 2: ``raise STACK[-2] from STACK[-1]`` (raise exception instance or type at
``STACK[-2]`` with ``__cause__`` set to ``STACK[-1]``)
.. opcode:: CALL (argc)
Calls a callable object with the number of arguments specified by ``argc``.
On the stack are (in ascending order):
* The callable
* ``self`` or ``NULL``
* The remaining positional arguments
``argc`` is the total of the positional arguments, excluding ``self``.
``CALL`` pops all arguments and the callable object off the stack,
calls the callable object with those arguments, and pushes the return value
returned by the callable object.
.. versionadded:: 3.11
.. versionchanged:: 3.13
The callable now always appears at the same position on the stack.
.. versionchanged:: 3.13
Calls with keyword arguments are now handled by :opcode:`CALL_KW`.
.. opcode:: CALL_KW (argc)
Calls a callable object with the number of arguments specified by ``argc``,
including one or more named arguments. On the stack are (in ascending order):
* The callable
* ``self`` or ``NULL``
* The remaining positional arguments
* The named arguments
* A :class:`tuple` of keyword argument names
``argc`` is the total of the positional and named arguments, excluding ``self``.
The length of the tuple of keyword argument names is the number of named arguments.
``CALL_KW`` pops all arguments, the keyword names, and the callable object
off the stack, calls the callable object with those arguments, and pushes the
return value returned by the callable object.
.. versionadded:: 3.13
.. opcode:: CALL_FUNCTION_EX (flags)
Calls a callable object with variable set of positional and keyword
arguments. If the lowest bit of *flags* is set, the top of the stack
contains a mapping object containing additional keyword arguments.
Before the callable is called, the mapping object and iterable object
are each "unpacked" and their contents passed in as keyword and
positional arguments respectively.
``CALL_FUNCTION_EX`` pops all arguments and the callable object off the stack,
calls the callable object with those arguments, and pushes the return value
returned by the callable object.
.. versionadded:: 3.6
.. opcode:: PUSH_NULL
Pushes a ``NULL`` to the stack.
Used in the call sequence to match the ``NULL`` pushed by
:opcode:`LOAD_METHOD` for non-method calls.
.. versionadded:: 3.11
.. opcode:: MAKE_FUNCTION
Pushes a new function object on the stack built from the code object at ``STACK[1]``.
.. versionchanged:: 3.10
Flag value ``0x04`` is a tuple of strings instead of dictionary
.. versionchanged:: 3.11
Qualified name at ``STACK[-1]`` was removed.
.. versionchanged:: 3.13
Extra function attributes on the stack, signaled by oparg flags, were
removed. They now use :opcode:`SET_FUNCTION_ATTRIBUTE`.
.. opcode:: SET_FUNCTION_ATTRIBUTE (flag)
Sets an attribute on a function object. Expects the function at ``STACK[-1]``
and the attribute value to set at ``STACK[-2]``; consumes both and leaves the
function at ``STACK[-1]``. The flag determines which attribute to set:
* ``0x01`` a tuple of default values for positional-only and
positional-or-keyword parameters in positional order
* ``0x02`` a dictionary of keyword-only parameters' default values
* ``0x04`` a tuple of strings containing parameters' annotations
* ``0x08`` a tuple containing cells for free variables, making a closure
.. versionadded:: 3.13
.. opcode:: BUILD_SLICE (argc)
.. index:: pair: built-in function; slice
Pushes a slice object on the stack. *argc* must be 2 or 3. If it is 2, implements::
end = STACK.pop()
start = STACK.pop()
STACK.append(slice(start, stop))
if it is 3, implements::
step = STACK.pop()
end = STACK.pop()
start = STACK.pop()
STACK.append(slice(start, end, step))
See the :func:`slice` built-in function for more information.
.. opcode:: EXTENDED_ARG (ext)
Prefixes any opcode which has an argument too big to fit into the default one
byte. *ext* holds an additional byte which act as higher bits in the argument.
For each opcode, at most three prefixal ``EXTENDED_ARG`` are allowed, forming
an argument from two-byte to four-byte.
.. opcode:: CONVERT_VALUE (oparg)
Convert value to a string, depending on ``oparg``::
value = STACK.pop()
result = func(value)
STACK.append(result)
* ``oparg == 1``: call :func:`str` on *value*
* ``oparg == 2``: call :func:`repr` on *value*
* ``oparg == 3``: call :func:`ascii` on *value*
Used for implementing formatted literal strings (f-strings).
.. versionadded:: 3.13
.. opcode:: FORMAT_SIMPLE
Formats the value on top of stack::
value = STACK.pop()
result = value.__format__("")
STACK.append(result)
Used for implementing formatted literal strings (f-strings).
.. versionadded:: 3.13
.. opcode:: FORMAT_SPEC
Formats the given value with the given format spec::
spec = STACK.pop()
value = STACK.pop()
result = value.__format__(spec)
STACK.append(result)
Used for implementing formatted literal strings (f-strings).
.. versionadded:: 3.13
.. opcode:: MATCH_CLASS (count)
``STACK[-1]`` is a tuple of keyword attribute names, ``STACK[-2]`` is the class
being matched against, and ``STACK[-3]`` is the match subject. *count* is the
number of positional sub-patterns.
Pop ``STACK[-1]``, ``STACK[-2]``, and ``STACK[-3]``. If ``STACK[-3]`` is an
instance of ``STACK[-2]`` and has the positional and keyword attributes
required by *count* and ``STACK[-1]``, push a tuple of extracted attributes.
Otherwise, push ``None``.
.. versionadded:: 3.10
.. versionchanged:: 3.11
Previously, this instruction also pushed a boolean value indicating
success (``True``) or failure (``False``).
.. opcode:: RESUME (context)
A no-op. Performs internal tracing, debugging and optimization checks.
The ``context`` operand consists of two parts. The lowest two bits
indicate where the ``RESUME`` occurs:
* ``0`` The start of a function, which is neither a generator, coroutine
nor an async generator
* ``1`` After a ``yield`` expression
* ``2`` After a ``yield from`` expression
* ``3`` After an ``await`` expression
The next bit is ``1`` if the RESUME is at except-depth ``1``, and ``0``
otherwise.
.. versionadded:: 3.11
.. versionchanged:: 3.13
The oparg value changed to include information about except-depth
.. opcode:: RETURN_GENERATOR
Create a generator, coroutine, or async generator from the current frame.
Used as first opcode of in code object for the above mentioned callables.
Clear the current frame and return the newly created generator.
.. versionadded:: 3.11
.. opcode:: SEND (delta)
Equivalent to ``STACK[-1] = STACK[-2].send(STACK[-1])``. Used in ``yield from``
and ``await`` statements.
If the call raises :exc:`StopIteration`, pop the top value from the stack,
push the exception's ``value`` attribute, and increment the bytecode counter
by *delta*.
.. versionadded:: 3.11
.. opcode:: HAVE_ARGUMENT
This is not really an opcode. It identifies the dividing line between
opcodes in the range [0,255] which don't use their argument and those
that do (``< HAVE_ARGUMENT`` and ``>= HAVE_ARGUMENT``, respectively).
If your application uses pseudo instructions or specialized instructions,
use the :data:`hasarg` collection instead.
.. versionchanged:: 3.6
Now every instruction has an argument, but opcodes ``< HAVE_ARGUMENT``
ignore it. Before, only opcodes ``>= HAVE_ARGUMENT`` had an argument.
.. versionchanged:: 3.12
Pseudo instructions were added to the :mod:`dis` module, and for them
it is not true that comparison with ``HAVE_ARGUMENT`` indicates whether
they use their arg.
.. deprecated:: 3.13
Use :data:`hasarg` instead.
.. opcode:: CALL_INTRINSIC_1
Calls an intrinsic function with one argument. Passes ``STACK[-1]`` as the
argument and sets ``STACK[-1]`` to the result. Used to implement
functionality that is not performance critical.
The operand determines which intrinsic function is called:
+-----------------------------------+-----------------------------------+
| Operand | Description |
+===================================+===================================+
| ``INTRINSIC_1_INVALID`` | Not valid |
+-----------------------------------+-----------------------------------+
| ``INTRINSIC_PRINT`` | Prints the argument to standard |
| | out. Used in the REPL. |
+-----------------------------------+-----------------------------------+
| ``INTRINSIC_IMPORT_STAR`` | Performs ``import *`` for the |
| | named module. |
+-----------------------------------+-----------------------------------+
| ``INTRINSIC_STOPITERATION_ERROR`` | Extracts the return value from a |
| | ``StopIteration`` exception. |
+-----------------------------------+-----------------------------------+
| ``INTRINSIC_ASYNC_GEN_WRAP`` | Wraps an aync generator value |
+-----------------------------------+-----------------------------------+
| ``INTRINSIC_UNARY_POSITIVE`` | Performs the unary ``+`` |
| | operation |
+-----------------------------------+-----------------------------------+
| ``INTRINSIC_LIST_TO_TUPLE`` | Converts a list to a tuple |
+-----------------------------------+-----------------------------------+
| ``INTRINSIC_TYPEVAR`` | Creates a :class:`typing.TypeVar` |
+-----------------------------------+-----------------------------------+
| ``INTRINSIC_PARAMSPEC`` | Creates a |
| | :class:`typing.ParamSpec` |
+-----------------------------------+-----------------------------------+
| ``INTRINSIC_TYPEVARTUPLE`` | Creates a |
| | :class:`typing.TypeVarTuple` |
+-----------------------------------+-----------------------------------+
| ``INTRINSIC_SUBSCRIPT_GENERIC`` | Returns :class:`typing.Generic` |
| | subscripted with the argument |
+-----------------------------------+-----------------------------------+
| ``INTRINSIC_TYPEALIAS`` | Creates a |
| | :class:`typing.TypeAliasType`; |
| | used in the :keyword:`type` |
| | statement. The argument is a tuple|
| | of the type alias's name, |
| | type parameters, and value. |
+-----------------------------------+-----------------------------------+
.. versionadded:: 3.12
.. opcode:: CALL_INTRINSIC_2
Calls an intrinsic function with two arguments. Used to implement functionality
that is not performance critical::
arg2 = STACK.pop()
arg1 = STACK.pop()
result = intrinsic2(arg1, arg2)
STACK.append(result)
The operand determines which intrinsic function is called:
+----------------------------------------+-----------------------------------+
| Operand | Description |
+========================================+===================================+
| ``INTRINSIC_2_INVALID`` | Not valid |
+----------------------------------------+-----------------------------------+
| ``INTRINSIC_PREP_RERAISE_STAR`` | Calculates the |
| | :exc:`ExceptionGroup` to raise |
| | from a ``try-except*``. |
+----------------------------------------+-----------------------------------+
| ``INTRINSIC_TYPEVAR_WITH_BOUND`` | Creates a :class:`typing.TypeVar` |
| | with a bound. |
+----------------------------------------+-----------------------------------+
| ``INTRINSIC_TYPEVAR_WITH_CONSTRAINTS`` | Creates a |
| | :class:`typing.TypeVar` with |
| | constraints. |
+----------------------------------------+-----------------------------------+
| ``INTRINSIC_SET_FUNCTION_TYPE_PARAMS`` | Sets the ``__type_params__`` |
| | attribute of a function. |
+----------------------------------------+-----------------------------------+
.. versionadded:: 3.12
.. opcode:: LOAD_SPECIAL
Performs special method lookup on ``STACK[-1]``.
If ``type(STACK[-1]).__xxx__`` is a method, leave
``type(STACK[-1]).__xxx__; STACK[-1]`` on the stack.
If ``type(STACK[-1]).__xxx__`` is not a method, leave
``STACK[-1].__xxx__; NULL`` on the stack.
.. versionadded:: 3.14
**Pseudo-instructions**
These opcodes do not appear in Python bytecode. They are used by the compiler
but are replaced by real opcodes or removed before bytecode is generated.
.. opcode:: SETUP_FINALLY (target)
Set up an exception handler for the following code block. If an exception
occurs, the value stack level is restored to its current state and control
is transferred to the exception handler at ``target``.
.. opcode:: SETUP_CLEANUP (target)
Like ``SETUP_FINALLY``, but in case of an exception also pushes the last
instruction (``lasti``) to the stack so that ``RERAISE`` can restore it.
If an exception occurs, the value stack level and the last instruction on
the frame are restored to their current state, and control is transferred
to the exception handler at ``target``.
.. opcode:: SETUP_WITH (target)
Like ``SETUP_CLEANUP``, but in case of an exception one more item is popped
from the stack before control is transferred to the exception handler at
``target``.
This variant is used in :keyword:`with` and :keyword:`async with`
constructs, which push the return value of the context manager's
:meth:`~object.__enter__` or :meth:`~object.__aenter__` to the stack.
.. opcode:: POP_BLOCK
Marks the end of the code block associated with the last ``SETUP_FINALLY``,
``SETUP_CLEANUP`` or ``SETUP_WITH``.
.. opcode:: JUMP
.. opcode:: JUMP_NO_INTERRUPT
Undirected relative jump instructions which are replaced by their
directed (forward/backward) counterparts by the assembler.
.. opcode:: LOAD_CLOSURE (i)
Pushes a reference to the cell contained in slot ``i`` of the "fast locals"
storage.
Note that ``LOAD_CLOSURE`` is replaced with ``LOAD_FAST`` in the assembler.
.. versionchanged:: 3.13
This opcode is now a pseudo-instruction.
.. opcode:: LOAD_METHOD
Optimized unbound method lookup. Emitted as a ``LOAD_ATTR`` opcode
with a flag set in the arg.
.. _opcode_collections:
Opcode collections
------------------
These collections are provided for automatic introspection of bytecode
instructions:
.. versionchanged:: 3.12
The collections now contain pseudo instructions and instrumented
instructions as well. These are opcodes with values ``>= MIN_PSEUDO_OPCODE``
and ``>= MIN_INSTRUMENTED_OPCODE``.
.. data:: opname
Sequence of operation names, indexable using the bytecode.
.. data:: opmap
Dictionary mapping operation names to bytecodes.
.. data:: cmp_op
Sequence of all compare operation names.
.. data:: hasarg
Sequence of bytecodes that use their argument.
.. versionadded:: 3.12
.. data:: hasconst
Sequence of bytecodes that access a constant.
.. data:: hasfree
Sequence of bytecodes that access a free variable. 'free' in this
context refers to names in the current scope that are referenced by inner
scopes or names in outer scopes that are referenced from this scope. It does
*not* include references to global or builtin scopes.
.. data:: hasname
Sequence of bytecodes that access an attribute by name.
.. data:: hasjump
Sequence of bytecodes that have a jump target. All jumps
are relative.
.. versionadded:: 3.13
.. data:: haslocal
Sequence of bytecodes that access a local variable.
.. data:: hascompare
Sequence of bytecodes of Boolean operations.
.. data:: hasexc
Sequence of bytecodes that set an exception handler.
.. versionadded:: 3.12
.. data:: hasjrel
Sequence of bytecodes that have a relative jump target.
.. deprecated:: 3.13
All jumps are now relative. Use :data:`hasjump`.
.. data:: hasjabs
Sequence of bytecodes that have an absolute jump target.
.. deprecated:: 3.13
All jumps are now relative. This list is empty.
Reference in a new issue View git blame Copy permalink