Stowage/cpython
2
0
Fork 0
mirror of https://github.com/python/cpython.git synced 2025-10-31 13:41:24 +00:00
Code Issues Projects Releases Packages Wiki Activity
cpython/Doc/library/difflib.rst
Georg Brandl e6bcc9145e Remove many "versionchanged" items that didn't use the official markup, 
but just some text embedded in the docs.

Also remove paragraph about implicit relative imports from tutorial.
2008-05-12 18:05:20 +00:00

746 lines
29 KiB
ReStructuredText
Raw Blame History

:mod:`difflib` --- Helpers for computing deltas
===============================================
.. module:: difflib
:synopsis: Helpers for computing differences between objects.
.. moduleauthor:: Tim Peters <tim_one@users.sourceforge.net>
.. sectionauthor:: Tim Peters <tim_one@users.sourceforge.net>
.. Markup by Fred L. Drake, Jr. <fdrake@acm.org>
.. testsetup::
import sys
from difflib import *
This module provides classes and functions for comparing sequences. It
can be used for example, for comparing files, and can produce difference
information in various formats, including HTML and context and unified
diffs. For comparing directories and files, see also, the :mod:`filecmp` module.
.. class:: SequenceMatcher
This is a flexible class for comparing pairs of sequences of any type, so long
as the sequence elements are :term:`hashable`. The basic algorithm predates, and is a
little fancier than, an algorithm published in the late 1980's by Ratcliff and
Obershelp under the hyperbolic name "gestalt pattern matching." The idea is to
find the longest contiguous matching subsequence that contains no "junk"
elements (the Ratcliff and Obershelp algorithm doesn't address junk). The same
idea is then applied recursively to the pieces of the sequences to the left and
to the right of the matching subsequence. This does not yield minimal edit
sequences, but does tend to yield matches that "look right" to people.
**Timing:** The basic Ratcliff-Obershelp algorithm is cubic time in the worst
case and quadratic time in the expected case. :class:`SequenceMatcher` is
quadratic time for the worst case and has expected-case behavior dependent in a
complicated way on how many elements the sequences have in common; best case
time is linear.
.. class:: Differ
This is a class for comparing sequences of lines of text, and producing
human-readable differences or deltas. Differ uses :class:`SequenceMatcher`
both to compare sequences of lines, and to compare sequences of characters
within similar (near-matching) lines.
Each line of a :class:`Differ` delta begins with a two-letter code:
+----------+-------------------------------------------+
| Code | Meaning |
+==========+===========================================+
| ``'- '`` | line unique to sequence 1 |
+----------+-------------------------------------------+
| ``'+ '`` | line unique to sequence 2 |
+----------+-------------------------------------------+
| ``' '`` | line common to both sequences |
+----------+-------------------------------------------+
| ``'? '`` | line not present in either input sequence |
+----------+-------------------------------------------+
Lines beginning with '``?``' attempt to guide the eye to intraline differences,
and were not present in either input sequence. These lines can be confusing if
the sequences contain tab characters.
.. class:: HtmlDiff
This class can be used to create an HTML table (or a complete HTML file
containing the table) showing a side by side, line by line comparison of text
with inter-line and intra-line change highlights. The table can be generated in
either full or contextual difference mode.
The constructor for this class is:
.. function:: __init__([tabsize][, wrapcolumn][, linejunk][, charjunk])
Initializes instance of :class:`HtmlDiff`.
*tabsize* is an optional keyword argument to specify tab stop spacing and
defaults to ``8``.
*wrapcolumn* is an optional keyword to specify column number where lines are
broken and wrapped, defaults to ``None`` where lines are not wrapped.
*linejunk* and *charjunk* are optional keyword arguments passed into ``ndiff()``
(used by :class:`HtmlDiff` to generate the side by side HTML differences). See
``ndiff()`` documentation for argument default values and descriptions.
The following methods are public:
.. function:: make_file(fromlines, tolines [, fromdesc][, todesc][, context][, numlines])
Compares *fromlines* and *tolines* (lists of strings) and returns a string which
is a complete HTML file containing a table showing line by line differences with
inter-line and intra-line changes highlighted.
*fromdesc* and *todesc* are optional keyword arguments to specify from/to file
column header strings (both default to an empty string).
*context* and *numlines* are both optional keyword arguments. Set *context* to
``True`` when contextual differences are to be shown, else the default is
``False`` to show the full files. *numlines* defaults to ``5``. When *context*
is ``True`` *numlines* controls the number of context lines which surround the
difference highlights. When *context* is ``False`` *numlines* controls the
number of lines which are shown before a difference highlight when using the
"next" hyperlinks (setting to zero would cause the "next" hyperlinks to place
the next difference highlight at the top of the browser without any leading
context).
.. function:: make_table(fromlines, tolines [, fromdesc][, todesc][, context][, numlines])
Compares *fromlines* and *tolines* (lists of strings) and returns a string which
is a complete HTML table showing line by line differences with inter-line and
intra-line changes highlighted.
The arguments for this method are the same as those for the :meth:`make_file`
method.
:file:`Tools/scripts/diff.py` is a command-line front-end to this class and
contains a good example of its use.
.. function:: context_diff(a, b[, fromfile][, tofile][, fromfiledate][, tofiledate][, n][, lineterm])
Compare *a* and *b* (lists of strings); return a delta (a :term:`generator`
generating the delta lines) in context diff format.
Context diffs are a compact way of showing just the lines that have changed plus
a few lines of context. The changes are shown in a before/after style. The
number of context lines is set by *n* which defaults to three.
By default, the diff control lines (those with ``***`` or ``---``) are created
with a trailing newline. This is helpful so that inputs created from
:func:`file.readlines` result in diffs that are suitable for use with
:func:`file.writelines` since both the inputs and outputs have trailing
newlines.
For inputs that do not have trailing newlines, set the *lineterm* argument to
``""`` so that the output will be uniformly newline free.
The context diff format normally has a header for filenames and modification
times. Any or all of these may be specified using strings for *fromfile*,
*tofile*, *fromfiledate*, and *tofiledate*. The modification times are normally
expressed in the format returned by :func:`time.ctime`. If not specified, the
strings default to blanks.
>>> s1 = ['bacon\n', 'eggs\n', 'ham\n', 'guido\n']
>>> s2 = ['python\n', 'eggy\n', 'hamster\n', 'guido\n']
>>> for line in context_diff(s1, s2, fromfile='before.py', tofile='after.py'):
... sys.stdout.write(line) # doctest: +NORMALIZE_WHITESPACE
*** before.py
--- after.py
***************
*** 1,4 ****
! bacon
! eggs
! ham
guido
--- 1,4 ----
! python
! eggy
! hamster
guido
See :ref:`difflib-interface` for a more detailed example.
.. function:: get_close_matches(word, possibilities[, n][, cutoff])
Return a list of the best "good enough" matches. *word* is a sequence for which
close matches are desired (typically a string), and *possibilities* is a list of
sequences against which to match *word* (typically a list of strings).
Optional argument *n* (default ``3``) is the maximum number of close matches to
return; *n* must be greater than ``0``.
Optional argument *cutoff* (default ``0.6``) is a float in the range [0, 1].
Possibilities that don't score at least that similar to *word* are ignored.
The best (no more than *n*) matches among the possibilities are returned in a
list, sorted by similarity score, most similar first.
>>> get_close_matches('appel', ['ape', 'apple', 'peach', 'puppy'])
['apple', 'ape']
>>> import keyword
>>> get_close_matches('wheel', keyword.kwlist)
['while']
>>> get_close_matches('apple', keyword.kwlist)
[]
>>> get_close_matches('accept', keyword.kwlist)
['except']
.. function:: ndiff(a, b[, linejunk][, charjunk])
Compare *a* and *b* (lists of strings); return a :class:`Differ`\ -style
delta (a :term:`generator` generating the delta lines).
Optional keyword parameters *linejunk* and *charjunk* are for filter functions
(or ``None``):
*linejunk*: A function that accepts a single string argument, and returns
true if the string is junk, or false if not. The default is ``None``. There
is also a module-level function :func:`IS_LINE_JUNK`, which filters out lines
without visible characters, except for at most one pound character (``'#'``)
-- however the underlying :class:`SequenceMatcher` class does a dynamic
analysis of which lines are so frequent as to constitute noise, and this
usually works better than using this function.
*charjunk*: A function that accepts a character (a string of length 1), and
returns if the character is junk, or false if not. The default is module-level
function :func:`IS_CHARACTER_JUNK`, which filters out whitespace characters (a
blank or tab; note: bad idea to include newline in this!).
:file:`Tools/scripts/ndiff.py` is a command-line front-end to this function.
>>> diff = ndiff('one\ntwo\nthree\n'.splitlines(1),
... 'ore\ntree\nemu\n'.splitlines(1))
>>> print(''.join(diff), end="")
- one
? ^
+ ore
? ^
- two
- three
? -
+ tree
+ emu
.. function:: restore(sequence, which)
Return one of the two sequences that generated a delta.
Given a *sequence* produced by :meth:`Differ.compare` or :func:`ndiff`, extract
lines originating from file 1 or 2 (parameter *which*), stripping off line
prefixes.
Example:
>>> diff = ndiff('one\ntwo\nthree\n'.splitlines(1),
... 'ore\ntree\nemu\n'.splitlines(1))
>>> diff = list(diff) # materialize the generated delta into a list
>>> print(''.join(restore(diff, 1)), end="")
one
two
three
>>> print(''.join(restore(diff, 2)), end="")
ore
tree
emu
.. function:: unified_diff(a, b[, fromfile][, tofile][, fromfiledate][, tofiledate][, n][, lineterm])
Compare *a* and *b* (lists of strings); return a delta (a :term:`generator`
generating the delta lines) in unified diff format.
Unified diffs are a compact way of showing just the lines that have changed plus
a few lines of context. The changes are shown in a inline style (instead of
separate before/after blocks). The number of context lines is set by *n* which
defaults to three.
By default, the diff control lines (those with ``---``, ``+++``, or ``@@``) are
created with a trailing newline. This is helpful so that inputs created from
:func:`file.readlines` result in diffs that are suitable for use with
:func:`file.writelines` since both the inputs and outputs have trailing
newlines.
For inputs that do not have trailing newlines, set the *lineterm* argument to
``""`` so that the output will be uniformly newline free.
The context diff format normally has a header for filenames and modification
times. Any or all of these may be specified using strings for *fromfile*,
*tofile*, *fromfiledate*, and *tofiledate*. The modification times are normally
expressed in the format returned by :func:`time.ctime`. If not specified, the
strings default to blanks.
>>> s1 = ['bacon\n', 'eggs\n', 'ham\n', 'guido\n']
>>> s2 = ['python\n', 'eggy\n', 'hamster\n', 'guido\n']
>>> for line in unified_diff(s1, s2, fromfile='before.py', tofile='after.py'):
... sys.stdout.write(line) # doctest: +NORMALIZE_WHITESPACE
--- before.py
+++ after.py
@@ -1,4 +1,4 @@
-bacon
-eggs
-ham
+python
+eggy
+hamster
guido
See :ref:`difflib-interface` for a more detailed example.
.. function:: IS_LINE_JUNK(line)
Return true for ignorable lines. The line *line* is ignorable if *line* is
blank or contains a single ``'#'``, otherwise it is not ignorable. Used as a
default for parameter *linejunk* in :func:`ndiff` in older versions.
.. function:: IS_CHARACTER_JUNK(ch)
Return true for ignorable characters. The character *ch* is ignorable if *ch*
is a space or tab, otherwise it is not ignorable. Used as a default for
parameter *charjunk* in :func:`ndiff`.
.. seealso::
`Pattern Matching: The Gestalt Approach <http://www.ddj.com/184407970?pgno=5>`_
Discussion of a similar algorithm by John W. Ratcliff and D. E. Metzener. This
was published in `Dr. Dobb's Journal <http://www.ddj.com/>`_ in July, 1988.
.. _sequence-matcher:
SequenceMatcher Objects
-----------------------
The :class:`SequenceMatcher` class has this constructor:
.. class:: SequenceMatcher([isjunk[, a[, b]]])
Optional argument *isjunk* must be ``None`` (the default) or a one-argument
function that takes a sequence element and returns true if and only if the
element is "junk" and should be ignored. Passing ``None`` for *isjunk* is
equivalent to passing ``lambda x: 0``; in other words, no elements are ignored.
For example, pass::
lambda x: x in " \t"
if you're comparing lines as sequences of characters, and don't want to synch up
on blanks or hard tabs.
The optional arguments *a* and *b* are sequences to be compared; both default to
empty strings. The elements of both sequences must be :term:`hashable`.
:class:`SequenceMatcher` objects have the following methods:
.. method:: set_seqs(a, b)
Set the two sequences to be compared.
:class:`SequenceMatcher` computes and caches detailed information about the
second sequence, so if you want to compare one sequence against many
sequences, use :meth:`set_seq2` to set the commonly used sequence once and
call :meth:`set_seq1` repeatedly, once for each of the other sequences.
.. method:: set_seq1(a)
Set the first sequence to be compared. The second sequence to be compared
is not changed.
.. method:: set_seq2(b)
Set the second sequence to be compared. The first sequence to be compared
is not changed.
.. method:: find_longest_match(alo, ahi, blo, bhi)
Find longest matching block in ``a[alo:ahi]`` and ``b[blo:bhi]``.
If *isjunk* was omitted or ``None``, :meth:`find_longest_match` returns
``(i, j, k)`` such that ``a[i:i+k]`` is equal to ``b[j:j+k]``, where ``alo
<= i <= i+k <= ahi`` and ``blo <= j <= j+k <= bhi``. For all ``(i', j',
k')`` meeting those conditions, the additional conditions ``k >= k'``, ``i
<= i'``, and if ``i == i'``, ``j <= j'`` are also met. In other words, of
all maximal matching blocks, return one that starts earliest in *a*, and
of all those maximal matching blocks that start earliest in *a*, return
the one that starts earliest in *b*.
>>> s = SequenceMatcher(None, " abcd", "abcd abcd")
>>> s.find_longest_match(0, 5, 0, 9)
Match(a=0, b=4, size=5)
If *isjunk* was provided, first the longest matching block is determined
as above, but with the additional restriction that no junk element appears
in the block. Then that block is extended as far as possible by matching
(only) junk elements on both sides. So the resulting block never matches
on junk except as identical junk happens to be adjacent to an interesting
match.
Here's the same example as before, but considering blanks to be junk. That
prevents ``' abcd'`` from matching the ``' abcd'`` at the tail end of the
second sequence directly. Instead only the ``'abcd'`` can match, and
matches the leftmost ``'abcd'`` in the second sequence:
>>> s = SequenceMatcher(lambda x: x==" ", " abcd", "abcd abcd")
>>> s.find_longest_match(0, 5, 0, 9)
Match(a=1, b=0, size=4)
If no blocks match, this returns ``(alo, blo, 0)``.
This method returns a :term:`named tuple` ``Match(a, b, size)``.
.. method:: get_matching_blocks()
Return list of triples describing matching subsequences. Each triple is of
the form ``(i, j, n)``, and means that ``a[i:i+n] == b[j:j+n]``. The
triples are monotonically increasing in *i* and *j*.
The last triple is a dummy, and has the value ``(len(a), len(b), 0)``. It
is the only triple with ``n == 0``. If ``(i, j, n)`` and ``(i', j', n')``
are adjacent triples in the list, and the second is not the last triple in
the list, then ``i+n != i'`` or ``j+n != j'``; in other words, adjacent
triples always describe non-adjacent equal blocks.
.. XXX Explain why a dummy is used!
.. doctest::
>>> s = SequenceMatcher(None, "abxcd", "abcd")
>>> s.get_matching_blocks()
[Match(a=0, b=0, size=2), Match(a=3, b=2, size=2), Match(a=5, b=4, size=0)]
.. method:: get_opcodes()
Return list of 5-tuples describing how to turn *a* into *b*. Each tuple is
of the form ``(tag, i1, i2, j1, j2)``. The first tuple has ``i1 == j1 ==
0``, and remaining tuples have *i1* equal to the *i2* from the preceding
tuple, and, likewise, *j1* equal to the previous *j2*.
The *tag* values are strings, with these meanings:
+---------------+---------------------------------------------+
| Value | Meaning |
+===============+=============================================+
| ``'replace'`` | ``a[i1:i2]`` should be replaced by |
| | ``b[j1:j2]``. |
+---------------+---------------------------------------------+
| ``'delete'`` | ``a[i1:i2]`` should be deleted. Note that |
| | ``j1 == j2`` in this case. |
+---------------+---------------------------------------------+
| ``'insert'`` | ``b[j1:j2]`` should be inserted at |
| | ``a[i1:i1]``. Note that ``i1 == i2`` in |
| | this case. |
+---------------+---------------------------------------------+
| ``'equal'`` | ``a[i1:i2] == b[j1:j2]`` (the sub-sequences |
| | are equal). |
+---------------+---------------------------------------------+
For example:
>>> a = "qabxcd"
>>> b = "abycdf"
>>> s = SequenceMatcher(None, a, b)
>>> for tag, i1, i2, j1, j2 in s.get_opcodes():
... print(("%7s a[%d:%d] (%s) b[%d:%d] (%s)" %
... (tag, i1, i2, a[i1:i2], j1, j2, b[j1:j2])))
delete a[0:1] (q) b[0:0] ()
equal a[1:3] (ab) b[0:2] (ab)
replace a[3:4] (x) b[2:3] (y)
equal a[4:6] (cd) b[3:5] (cd)
insert a[6:6] () b[5:6] (f)
.. method:: get_grouped_opcodes([n])
Return a :term:`generator` of groups with up to *n* lines of context.
Starting with the groups returned by :meth:`get_opcodes`, this method
splits out smaller change clusters and eliminates intervening ranges which
have no changes.
The groups are returned in the same format as :meth:`get_opcodes`.
.. method:: ratio()
Return a measure of the sequences' similarity as a float in the range [0,
1].
Where T is the total number of elements in both sequences, and M is the
number of matches, this is 2.0\*M / T. Note that this is ``1.0`` if the
sequences are identical, and ``0.0`` if they have nothing in common.
This is expensive to compute if :meth:`get_matching_blocks` or
:meth:`get_opcodes` hasn't already been called, in which case you may want
to try :meth:`quick_ratio` or :meth:`real_quick_ratio` first to get an
upper bound.
.. method:: quick_ratio()
Return an upper bound on :meth:`ratio` relatively quickly.
This isn't defined beyond that it is an upper bound on :meth:`ratio`, and
is faster to compute.
.. method:: real_quick_ratio()
Return an upper bound on :meth:`ratio` very quickly.
This isn't defined beyond that it is an upper bound on :meth:`ratio`, and
is faster to compute than either :meth:`ratio` or :meth:`quick_ratio`.
The three methods that return the ratio of matching to total characters can give
different results due to differing levels of approximation, although
:meth:`quick_ratio` and :meth:`real_quick_ratio` are always at least as large as
:meth:`ratio`:
>>> s = SequenceMatcher(None, "abcd", "bcde")
>>> s.ratio()
0.75
>>> s.quick_ratio()
0.75
>>> s.real_quick_ratio()
1.0
.. _sequencematcher-examples:
SequenceMatcher Examples
------------------------
This example compares two strings, considering blanks to be "junk:"
>>> s = SequenceMatcher(lambda x: x == " ",
... "private Thread currentThread;",
... "private volatile Thread currentThread;")
:meth:`ratio` returns a float in [0, 1], measuring the similarity of the
sequences. As a rule of thumb, a :meth:`ratio` value over 0.6 means the
sequences are close matches:
>>> print(round(s.ratio(), 3))
0.866
If you're only interested in where the sequences match,
:meth:`get_matching_blocks` is handy:
>>> for block in s.get_matching_blocks():
... print("a[%d] and b[%d] match for %d elements" % block)
a[0] and b[0] match for 8 elements
a[8] and b[17] match for 21 elements
a[29] and b[38] match for 0 elements
Note that the last tuple returned by :meth:`get_matching_blocks` is always a
dummy, ``(len(a), len(b), 0)``, and this is the only case in which the last
tuple element (number of elements matched) is ``0``.
If you want to know how to change the first sequence into the second, use
:meth:`get_opcodes`:
>>> for opcode in s.get_opcodes():
... print("%6s a[%d:%d] b[%d:%d]" % opcode)
equal a[0:8] b[0:8]
insert a[8:8] b[8:17]
equal a[8:29] b[17:38]
See also the function :func:`get_close_matches` in this module, which shows how
simple code building on :class:`SequenceMatcher` can be used to do useful work.
.. _differ-objects:
Differ Objects
--------------
Note that :class:`Differ`\ -generated deltas make no claim to be **minimal**
diffs. To the contrary, minimal diffs are often counter-intuitive, because they
synch up anywhere possible, sometimes accidental matches 100 pages apart.
Restricting synch points to contiguous matches preserves some notion of
locality, at the occasional cost of producing a longer diff.
The :class:`Differ` class has this constructor:
.. class:: Differ([linejunk[, charjunk]])
Optional keyword parameters *linejunk* and *charjunk* are for filter functions
(or ``None``):
*linejunk*: A function that accepts a single string argument, and returns true
if the string is junk. The default is ``None``, meaning that no line is
considered junk.
*charjunk*: A function that accepts a single character argument (a string of
length 1), and returns true if the character is junk. The default is ``None``,
meaning that no character is considered junk.
:class:`Differ` objects are used (deltas generated) via a single method:
.. method:: Differ.compare(a, b)
Compare two sequences of lines, and generate the delta (a sequence of lines).
Each sequence must contain individual single-line strings ending with newlines.
Such sequences can be obtained from the :meth:`readlines` method of file-like
objects. The delta generated also consists of newline-terminated strings, ready
to be printed as-is via the :meth:`writelines` method of a file-like object.
.. _differ-examples:
Differ Example
--------------
This example compares two texts. First we set up the texts, sequences of
individual single-line strings ending with newlines (such sequences can also be
obtained from the :meth:`readlines` method of file-like objects):
>>> text1 = ''' 1. Beautiful is better than ugly.
... 2. Explicit is better than implicit.
... 3. Simple is better than complex.
... 4. Complex is better than complicated.
... '''.splitlines(1)
>>> len(text1)
4
>>> text1[0][-1]
'\n'
>>> text2 = ''' 1. Beautiful is better than ugly.
... 3. Simple is better than complex.
... 4. Complicated is better than complex.
... 5. Flat is better than nested.
... '''.splitlines(1)
Next we instantiate a Differ object:
>>> d = Differ()
Note that when instantiating a :class:`Differ` object we may pass functions to
filter out line and character "junk." See the :meth:`Differ` constructor for
details.
Finally, we compare the two:
>>> result = list(d.compare(text1, text2))
``result`` is a list of strings, so let's pretty-print it:
>>> from pprint import pprint
>>> pprint(result)
[' 1. Beautiful is better than ugly.\n',
'- 2. Explicit is better than implicit.\n',
'- 3. Simple is better than complex.\n',
'+ 3. Simple is better than complex.\n',
'? ++\n',
'- 4. Complex is better than complicated.\n',
'? ^ ---- ^\n',
'+ 4. Complicated is better than complex.\n',
'? ++++ ^ ^\n',
'+ 5. Flat is better than nested.\n']
As a single multi-line string it looks like this:
>>> import sys
>>> sys.stdout.writelines(result)
1. Beautiful is better than ugly.
- 2. Explicit is better than implicit.
- 3. Simple is better than complex.
+ 3. Simple is better than complex.
? ++
- 4. Complex is better than complicated.
? ^ ---- ^
+ 4. Complicated is better than complex.
? ++++ ^ ^
+ 5. Flat is better than nested.
.. _difflib-interface:
A command-line interface to difflib
-----------------------------------
This example shows how to use difflib to create a ``diff``-like utility.
It is also contained in the Python source distribution, as
:file:`Tools/scripts/diff.py`.
.. testcode::
""" Command line interface to difflib.py providing diffs in four formats:
* ndiff: lists every line and highlights interline changes.
* context: highlights clusters of changes in a before/after format.
* unified: highlights clusters of changes in an inline format.
* html: generates side by side comparison with change highlights.
"""
import sys, os, time, difflib, optparse
def main():
# Configure the option parser
usage = "usage: %prog [options] fromfile tofile"
parser = optparse.OptionParser(usage)
parser.add_option("-c", action="store_true", default=False,
help='Produce a context format diff (default)')
parser.add_option("-u", action="store_true", default=False,
help='Produce a unified format diff')
hlp = 'Produce HTML side by side diff (can use -c and -l in conjunction)'
parser.add_option("-m", action="store_true", default=False, help=hlp)
parser.add_option("-n", action="store_true", default=False,
help='Produce a ndiff format diff')
parser.add_option("-l", "--lines", type="int", default=3,
help='Set number of context lines (default 3)')
(options, args) = parser.parse_args()
if len(args) == 0:
parser.print_help()
sys.exit(1)
if len(args) != 2:
parser.error("need to specify both a fromfile and tofile")
n = options.lines
fromfile, tofile = args # as specified in the usage string
# we're passing these as arguments to the diff function
fromdate = time.ctime(os.stat(fromfile).st_mtime)
todate = time.ctime(os.stat(tofile).st_mtime)
fromlines = open(fromfile, 'U').readlines()
tolines = open(tofile, 'U').readlines()
if options.u:
diff = difflib.unified_diff(fromlines, tolines, fromfile, tofile,
fromdate, todate, n=n)
elif options.n:
diff = difflib.ndiff(fromlines, tolines)
elif options.m:
diff = difflib.HtmlDiff().make_file(fromlines, tolines, fromfile,
tofile, context=options.c,
numlines=n)
else:
diff = difflib.context_diff(fromlines, tolines, fromfile, tofile,
fromdate, todate, n=n)
# we're using writelines because diff is a generator
sys.stdout.writelines(diff)
if __name__ == '__main__':
main()
Reference in a new issue View git blame Copy permalink