It is only used by the MPEG-4 decoder and the encoders.
Notice that this field is a per-frame property and therefore
does not need to by synced in mpeg4_update_thread_context().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Many of the fields of MpegEncContext (which is also used by decoders)
are actually only used by encoders. Therefore this commit adds
a new encoder-only structure and moves all of the encoder-only
fields to it except for those which require more explicit
synchronisation between the main slice context and the other
slice contexts. This synchronisation is currently mainly provided
by ff_update_thread_context() which simply copies most of
the main slice context over the other slice contexts. Fields
which are moved to the new MPVEncContext no longer participate
in this (which is desired, because it is horrible and for the
fields b) below wasteful) which means that some fields can only
be moved when explicit synchronisation code is added in later commits.
More explicitly, this commit moves the following fields:
a) Fields not copied by ff_update_duplicate_context():
dct_error_sum and dct_count; the former does not need synchronisation,
the latter is synchronised in merge_context_after_encode().
b) Fields which do not change after initialisation (these fields
could also be put into MPVMainEncContext at the cost of
an indirection to access them): lambda_table, adaptive_quant,
{luma,chroma}_elim_threshold, new_pic, fdsp, mpvencdsp, pdsp,
{p,b_forw,b_back,b_bidir_forw,b_bidir_back,b_direct,b_field}_mv_table,
[pb]_field_select_table, mb_{type,var,mean}, mc_mb_var, {min,max}_qcoeff,
{inter,intra}_quant_bias, ac_esc_length, the *_vlc_length fields,
the q_{intra,inter,chroma_intra}_matrix{,16}, dct_offset, mb_info,
mjpeg_ctx, rtp_mode, rtp_payload_size, encode_mb, all function
pointers, mpv_flags, quantizer_noise_shaping,
frame_reconstruction_bitfield, error_rate and intra_penalty.
c) Fields which are already (re)set explicitly: The PutBitContexts
pb, tex_pb, pb2; dquant, skipdct, encoding_error, the statistics
fields {mv,i_tex,p_tex,misc,last}_bits and i_count; last_mv_dir,
esc_pos (reset when writing the header).
d) Fields which are only used by encoders not supporting slice
threading for which synchronisation doesn't matter: esc3_level_length
and the remaining mb_info fields.
e) coded_score: This field is only really used when FF_MPV_FLAG_CBP_RD
is set (which implies trellis) and even then it is only used for
non-intra blocks. For these blocks dct_quantize_trellis_c() either
sets coded_score[n] or returns a last_non_zero value of -1
in which case coded_score will be reset in encode_mb_internal().
Therefore no old values are ever used.
The MotionEstContext has not been moved yet.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
last_pict_type, last_non_b_pict_type and last_lambda_for
are only used by the encoder's main thread.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The header is always written by the main thread, so it is
not surprising that header_bits can be moved to MPVMainEncContext
as well.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
While it is save for these codecs (they all have private contexts),
it is customary to always use the AVCodecContext for logging.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also only allocate them when they are needed (namely iff
adaptive quant is true) and allocate them jointly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: 5.92611e+20 is outside the range of representable values of type 'unsigned long'
Fixes: 68984/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_SNOW_fuzzer-5155755073273856
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
There are two types of MPVPictures: Three (cur_pic, last_pic, next_pic)
that are directly part of MpegEncContext and an array of MPVPictures
that are separately allocated and are mostly accessed via pointers
(cur|last|next)_pic_ptr; they are also used to store AVFrames in the
encoder (necessary due to B-frames). As the name implies, each of the
former is directly associated with one of the _ptr pointers:
They actually share the same underlying buffers, but the ones
that are part of the context can have their data pointers offset
and their linesize doubled for field pictures.
Up until now, each of these had their own references; in particular,
there was an underlying av_frame_ref() to sync cur_pic and cur_pic_ptr
etc. This is wasteful.
This commit changes this relationship: cur_pic, last_pic and next_pic
now become MPVWorkPictures; this structure does not have an AVFrame
at all any more, but only the cached values of data and linesize.
It also contains a pointer to the corresponding MPVPicture, establishing
a more natural relationsship between the two.
This already means that creating the context-pictures from the pointers
can no longer fail.
What has not been changed is the fact that the MPVPicture* pointers
are not ownership pointers and that the MPVPictures are part of an
array of MPVPictures that is owned by a single AVCodecContext.
Doing so will be done in a latter commit.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Specifically, add const to the pointed-to-type of pointers
that point to something static or that belong to last_pic
or next_pic (because modifying these might lead to data races).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
current_picture->cur_pic, last_picture->last_pic, similarly
for new_picture and next_picture.
Also rename the corresponding *_ptr fields.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is currently done inconsistently: Only one error path
(namely the one from init_pass2()) made ff_rate_control_init()
call ff_rate_control_uninit(); in other error paths
cleanup was left to the caller.
Given that the only caller of this function already performs
the necessary cleanup this commit changes this to always
rely on the caller to perform cleanup on error.
Also return the error code from init_pass2().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
There are lots of files that don't need it: The number of object
files that actually need it went down from 2011 to 884 here.
Keep it for external users in order to not cause breakages.
Also improve the other headers a bit while just at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is undefined behaviour to call a function with a different
signature for the call than the actual function signature;
there are no exceptions for void* and RateControlEntry*.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For encoding, this field is entirely redundant with
AVCodecContext.framerate.
For decoding, this field is entirely redundant with
AV_CODEC_PROP_FIELDS.
These fields are only ever set by the encoder for the current picture
and for no other picture. So only one set of these values needs to
exist, so move them to MpegEncContext.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These tables are only used by encoders and only for the current picture;
ergo they need not be put into the picture at all, but rather into
the encoder's context. They also don't need to be refcounted,
because there is only one owner.
In contrast to this, the earlier code refcounts them which
incurs unnecessary overhead. These references are not unreferenced
in ff_mpeg_unref_picture() (they are kept in order to have something
like a buffer pool), so that several buffers are kept at the same
time, although only one is needed, thereby wasting memory.
The code also propagates references to other pictures not part of
the pictures array (namely the copy of the current/next/last picture
in the MpegEncContext which get references of their own). These
references are not unreferenced in ff_mpeg_unref_picture() (the
buffers are probably kept in order to have something like a pool),
yet if the current picture is a B-frame, it gets unreferenced
at the end of ff_mpv_encode_picture() and its slot in the picture
array will therefore be reused the next time; but the copy of the
current picture also still has its references and therefore
these buffers will be made duplicated in order to make them writable
in the next call to ff_mpv_encode_picture(). This is of course
unnecessary.
Finally, ff_find_unused_picture() is supposed to just return
any unused picture and the code is supposed to work with it;
yet for the vsynth*-mpeg4-adap tests the result depends upon
the content of these buffers; given that this patchset
changes the content of these buffers (the initial content is now
the state of these buffers after encoding the last frame;
before this patch the buffers used came from the last picture
that occupied the same slot in the picture array) their ref-files
needed to be changed. This points to a bug somewhere (if one removes
the initialization, one gets uninitialized reads in
adaptive_quantization in ratecontrol.c).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
* commit 'a1f6a2dfda':
ratecontrol: Reorder functions to avoid forward declarations
Merged, but this seems to break the clear separation of 1-pass vs
2-pass.
Merged-by: Clément Bœsch <u@pkh.me>
libavcodec/ratecontrol.c:120:9: warning: ISO C forbids initialization between function pointer and ‘void *’ [-Wpedantic]
libavcodec/ratecontrol.c:121:9: warning: ISO C forbids initialization between function pointer and ‘void *’ [-Wpedantic]
