The documentation states that here 0 should be used for read-only and
1 for a writable buffer. AVIO_FLAG_WRITE however is 2, while it works
due to the way the flag is handled internally, it is still wrong
according to the documentation.
Additionally it makes it seem as if the AVIO_FLAG_* values could be used
here, which is actually not true, as when AVIO_FLAG_READ would be used
here it would create a writable buffer as AVIO_FLAG_READ is defined as 1.
Signed-off-by: Anton Khirnov <anton@khirnov.net>
this allows getting rid of the hardcoded max size of SDP.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Limin Wang <lance.lmwang@gmail.com>
The number of audio channels is stored after the magic number
identifying the audio format. Prior to this patch the code has been
reading it earlier, causing files with only one audio channel to be
handled incorrectly.
Reviewed-by: Peter Ross <pross@xvid.org>
Adds demuxer for Square Enux SCD files.
Based off [1] and personal investigation.
This has only been tested against Drakengard 3 (PS3) *_SCD.XXX files
(big-endian). As it is highly likely that FFXIV (PC) files are little-endian,
this demuxer is marked as experimental until this can be confirmed.
[1]: http://ffxivexplorer.fragmenterworks.com/research/scd%20files.txt
Reviewed-by: Peter Ross <pross@xvid.org>
Reviewed-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Signed-off-by: Zane van Iperen <zane@zanevaniperen.com>
Currently they are ordered as-written (i.e. by increasing position);
in case av_interleaved_write_frame() is used, this is (mostly)
the same as ordered by increasing dts.
Yet the Matroska specification strongly recommends (SHOULD) that
the CuePoints be sorted by CueTime. mkvalidator warns when they are
not. Therefore this commit sorts them accordingly.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If fifo_thread_recover() succeeds immediately after
fifo_thread_dispatch_message() fails, the dts of the packet is scaled
twice, causing cur_dts to be abnormally large and "Application provided
invalid, non monotonically increasing dts to muxer in stream" to occur
repeatedly.
Steps to reproduce:
1. ffmpeg -f lavfi -i testsrc -c:v libx264 -map 0:v -flags +global_header -f fifo -fifo_format flv -attempt_recovery 1 -recover_any_error 1 rtmp://example.com/livekey
2. set a breakpoint on fifo_thread_recover
3. force disconnect from the rtmp server
4. wait for break
5. reconnect to the rtmp server
6. resume execution of ffmpeg
Signed-off-by: Ryoji Gyoda <gy.cft4@gmail.com>
Signed-off-by: Marton Balint <cus@passwd.hu>
FLV AMF tags have a 24bit field for timestamps plus an 8bit for extended
timestamps.
All FLV AMF tags except when we write metadata handle this correctly
using the put_timestamp function.
Until now when writing metadata we were only using the first
24 bits and thus the timestamp value was wraping around 4 hours 40
minutes (16,800,000 ms, max 24 bit value 16,777,216) of playback.
This commit fixes this applying this same function put_timestamp
for the metadata FLV tag.
Signed-off-by: Marton Balint <cus@passwd.hu>
Fixes: signed integer overflow: -776522110086937600 * 16 cannot be represented in type 'long'
Fixes: 40563/clusterfuzz-testcase-minimized-ffmpeg_dem_MOV_fuzzer-6644829447127040
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Due to reasons, mpv doesn't pass filename when probing. mpv also sets
default probescore threshold to 26. Since the current jpeg_probe
implementation returns 25 until EOI, it means that the whole image needs
to be probed to succeed. Worse, the whole image is not passed at once;
increasingly large buffers are tried before that. Adding it up together,
if many demuxers are enabled, moderately large JPEG files (few MB) can
take several seconds to open, despite taking less than 1 second to
actually decode.
Therefore, adjust the heuristic to be more optimistic if proper JFIF or
Exif segments are found. While not strictly required, the vast majority
of JPEG-ish files have one or the other or both.
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
For most check_bitstream() functions this just avoids having
to dereference s->streams[pkt->stream_index] themselves; but for
meta-muxers it will allow to forward the packet to stream with
a different stream_index (belonging to a different AVFormatContext)
without using a spare packet.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
path1 and sanitized_path are both MAX_URL_SIZE bytes long, yet the latter is
copied from the former with the addition of one extra character.
Should fix a -Wformat-truncation warning.
Signed-off-by: James Almer <jamrial@gmail.com>
As per 8.6.1.2.2 of ISO/IEC 14496-12:2015(E), STTS sample offsets
are to be always stored as uint32_t. So far, they have been signed ints
which led to desync in files with very large offsets.
The MOVStts struct was used to store CTTS offsets as well. These can be
negative in version 1. So a new struct MOVCtts was created and all
declarations for CTTS usage changed to MOVCtts.
The actual frame_size is no longer used since commit
3d38e45eb8; and the check for
"< 0" is equivalent to the CID being valid. But this is already
checked by avpriv_dnxhd_get_interlaced() (and is actually already
ensured by mxf_dnxhd_codec_uls containing this CID).
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is just a flag per supported CID. So there is no reason to use
an avpriv function for this purpose.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It avoids the overhead of the packet list; furthermore, using
ff_interleave_packet_per_dts() is wrong for the null muxer anyway,
because said muxer accepts packets without timestamps, which
ff_interleave_packet_per_dts() can't handle.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It avoids branches lateron and will allow to easily avoid the overhead
of the linked list currently in use in case there is only one stream.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Besides being unused it should not be used at all:
The order of options of bitstream filters is not guaranteed
to be stable at all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The MXF muxers only write the header after they have received
a packet; the actual write_header function does not write anything.
So make an init function out of it.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
None of the muxers here has the AVFMT_NOSTREAMS flag set,
so it is checked generically that there are streams.
Reviewed-by: Tomas Härdin <tjoppen@acc.umu.se>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is especially important in case avio_write() would be switched
to an unsigned type like size_t, then a potential error from avio_read()
(with negative return value) would no longer be handled gracefully by
avio_write().
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The memset here is both unnecessary (avio_read() ignores the previous
content of the destination buffer) as well as nonsense (for a char
buf[BUFSIZE] sizeof(buf) and sizeof(BUFSIZE) are not the same; the
latter is sizeof(int)).
Fixes Coverity issue #1465863.
Reviewed-by: Steven Liu <lq@chinaffmpeg.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In 45bfe8b838, short_seek_threshold was removed
from the public AVIO struct. Although this option was private and not intended
to be used by public API users, it was nonetheless, because it provided functionality
that could otherwise not be gained via public API.
This was especially important for networked I/O like HTTP, where the internal
size for lavf could be way to small depending on the specifics of a user's
usecase, such as reading interlavd media files from cloud storage.
Add an AVOption to make this functionality accessible to the HTTP client.
Signed-off-by: Derek Buitenhuis <derek.buitenhuis@gmail.com>
There is no reason to wrap them in #ifndef guards, they should only be
defined here and nowhere else. The define guards just add the
possibility to accidentally use the same FF_API name in different
libraries.
NEEDS_UNSAFE has the same value as NEEDS_FILE,
causing "duration not allowed if safe" error
while duration directive doesn't require unsafe mode.
Signed-off-by: Googleplex <yyoung2001@gmail.com>
