acelp_kelvin, g729, qcelp, sipr and wmavoice decoders all depend upon
mips/{acelp_filters_mips,celp_filters_mips,acelp_vectors_mips}.o when
arch is mips.
g723_1 depends on mips/{celp_filters_mips,acelp_vectors_mips}.o.
comfortnoise, evrc, ra144 and ra288 depend on mips/celp_filters_mips.o.
The iirfilter is only used in its test tool since
01ecb7172b which
stopped using it in AAC, its only user.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Before this commit, the input in get_pixels and get_pixels_unaligned
has been treated inconsistenly:
- The generic code treated 9, 10, 12 and 14 bits as 16bit input
(these bits correspond to what FFmpeg's dsputils supported),
everything with <= 8 bits as 8 bit and everything else as 8 bit
when used via AVDCT (which exposes these functions and purports
to support up to 14 bits).
- AARCH64, ARM, PPC and RISC-V, x86 ignore this AVDCT special case.
- RISC-V also ignored the restriction to 9, 10, 12 and 14 for its
16bit check and treated everything > 8 bits as 16bit.
- The mmi MIPS code treats everything as 8 bit when used via
AVDCT (this is certainly broken); otherwise it checks for <= 8 bits.
The msa MIPS code behaves like the generic code.
This commit changes this to treat 9..16 bits as 16 bit input,
everything else as 8 bit (the former because it makes sense,
the latter to preserve the behaviour for external users*).
*: The only internal user of AVDCT (the spp filter) always
uses 8, 9 or 10 bits.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ff_xvid_idct_init() already checks in case of high_bit_depth,
lowres or an incompatible idct_algo.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
For all encoders and all decoders except MPEG-4 the unquantize
functions to use don't change at all and therefore needn't be
kept in the context. So discard them after setting them;
for MPEG-4, the functions get assigned on a per-frame basis.
Decoders not using any unquantize functions (H.261, MPEG-1/2)
as well as decoders that only call ff_mpv_reconstruct_mb()
through error resilience (RV30/40, the VC-1 family) don't have
the remaining pointers set at all.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is in preparation for only keeping the actually used
unquantize functions in MpegEncContext.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Many of the fields of MpegEncContext (which is also used by decoders)
are actually only used by encoders. Therefore this commit adds
a new encoder-only structure and moves all of the encoder-only
fields to it except for those which require more explicit
synchronisation between the main slice context and the other
slice contexts. This synchronisation is currently mainly provided
by ff_update_thread_context() which simply copies most of
the main slice context over the other slice contexts. Fields
which are moved to the new MPVEncContext no longer participate
in this (which is desired, because it is horrible and for the
fields b) below wasteful) which means that some fields can only
be moved when explicit synchronisation code is added in later commits.
More explicitly, this commit moves the following fields:
a) Fields not copied by ff_update_duplicate_context():
dct_error_sum and dct_count; the former does not need synchronisation,
the latter is synchronised in merge_context_after_encode().
b) Fields which do not change after initialisation (these fields
could also be put into MPVMainEncContext at the cost of
an indirection to access them): lambda_table, adaptive_quant,
{luma,chroma}_elim_threshold, new_pic, fdsp, mpvencdsp, pdsp,
{p,b_forw,b_back,b_bidir_forw,b_bidir_back,b_direct,b_field}_mv_table,
[pb]_field_select_table, mb_{type,var,mean}, mc_mb_var, {min,max}_qcoeff,
{inter,intra}_quant_bias, ac_esc_length, the *_vlc_length fields,
the q_{intra,inter,chroma_intra}_matrix{,16}, dct_offset, mb_info,
mjpeg_ctx, rtp_mode, rtp_payload_size, encode_mb, all function
pointers, mpv_flags, quantizer_noise_shaping,
frame_reconstruction_bitfield, error_rate and intra_penalty.
c) Fields which are already (re)set explicitly: The PutBitContexts
pb, tex_pb, pb2; dquant, skipdct, encoding_error, the statistics
fields {mv,i_tex,p_tex,misc,last}_bits and i_count; last_mv_dir,
esc_pos (reset when writing the header).
d) Fields which are only used by encoders not supporting slice
threading for which synchronisation doesn't matter: esc3_level_length
and the remaining mb_info fields.
e) coded_score: This field is only really used when FF_MPV_FLAG_CBP_RD
is set (which implies trellis) and even then it is only used for
non-intra blocks. For these blocks dct_quantize_trellis_c() either
sets coded_score[n] or returns a last_non_zero value of -1
in which case coded_score will be reset in encode_mb_internal().
Therefore no old values are ever used.
The MotionEstContext has not been moved yet.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The C version is set in ff_dct_encode_init(), yet the MIPS version
is set in dct_init() (in ff_mpv_common_init() and therefore also
for decoders). This commit fixes this inconsistency.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The code was written in 2012, but seems to have been broken
for just as long. Compilation is broken on every MIPS/MIPS64
system with an FPU (which the code depends on).
The function is called only internally in DSP, so we do not
need to expose it.
apply_ltp on MIPS uses this function, but due to the function
being just a glue function with no real optimizations,
duplicate it there.
Up until now, there was one AACDecContext for the fixed
and one for the floating point decoder. These differed
mostly in certain arrays which were int for the fixed-point
and float for the floating point decoder; there were also
differences in corresponding function pointers.
Yet in order to deduplicate the enormous amount of currently
duplicated code between the float and the fixed-point decoder,
one needs common contexts. Given that int and float have the
same size on all common systems, this commit replaces these
arrays by unions of int arrays and of float arrays. The names
of these arrays have been chosen to be compatible with
AAC_RENAME().
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Each ChannelElement contains exactly one SpectralBandReplication
structure; the latter structure contains lots of buffers
whose size depend upon USE_FIXED (i.e. AAC_FLOAT arrays).
This complicates deduplicating the parts of the AAC decoder
that are duplicated between the fixed-point and the floating
point decoder.
In order to fix this, the SpectralBandReplication structure
will be moved from the part of ChannelElement visible to
the common code. Therefore the ff_aac_sbr_* functions
are ported to accept a ChannelElement*; they will then have
to translate that to the corresponding SpectralBandReplication*
themselves (which is possible, because there are floating-point
and fixed-point versions of these functions).
While just at it, also ensure that these functions are properly
namespaced.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ff_aac_coder_init_mips() modifies a static const structure of
function pointers. This will crash if the binary uses relro
and is a data race in any case.
Furthermore it points to a maintainability issue: The
AACCoefficientsEncoder structures have been constified
in commit fd9212f2ed,
a Libav commit merged in 318778de9e.
Libav did not have the MIPS-specific AAC code and so this was
fine for them; yet FFmpeg had them, but this was not recognized.
Commit 75a099fc73 points to another
maintainability issue: Contrary to ordinary DSP code, this code
here is way more complex and needs to be constantly kept in sync
with the ordinary code which it mimicks and replaces. Said commit
is the only commit actually changing aaccoder.c in the last few
years and the same change has not been performed for the MIPS
clone; before that, it even happened several times that the mips
code was broken due to changes of the generic code (see commits
97437bd17a and
de262d018d or
860dbe0275 or
933309a6ca or
b65ffa316e). This might even lead
to scenarios where someone changing non-dsp aacenc code would
have to modify mips inline asm in order to keep them in sync.
This is obviously a significant burden (if the AAC encoder were
actively developed).
Finally, the code does not even compile here due to errors like
"Error: float register should be even, was 1".
Reviewed-by: Lynne <dev@lynne.ee>
Reviewed-by: Jean-Baptiste Kempf <jb@videolan.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
All versions of MSVC that support C11 (namely >= v19.27)
also support the restrict keyword, therefore av_restrict
is no longer necessary since 75697836b1.
Reviewed-by: Martin Storsjö <martin@martin.st>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Otherwise aacenc.o gets pulled in by the aacencdsp checkasm
test and it in turn pulls the rest of lavc in.
Besides being bad size-wise this also has the downside that
it pulls in avpriv_(cga|vga16)_font from libavutil which are
marked as being imported from another library when building
libavcodec as a DLL and this breaks checkasm because it links
both lavc and lavu statically.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is decoder-only; furthermore, there is already
an AACContext in use by libfdk-aacenc.
Also make aacdec.h provide the typedef for AACContext;
up until now, this has been done by sbr.h.
Reviewed-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Besides simplifying address computations (it saves 432B of .text
in hevcdsp.o alone here) it also fixes undefined behaviour that
occurs if mx or my are 0 (happens when the filters are unused)
because they lead to an array index of -1 in the old code.
This happens in the checkasm-hevc_pel FATE-test.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Reviewed-by: Nuo Mi <nuomi2021@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
They were replaced by TX from libavutil; the tremendous work
to get to this point (both creating TX as well as porting
the users of the components removed in this commit) was
completely performed by Lynne alone.
Removing the subsystems from configure may break some command lines,
because the --disable-fft etc. options are no longer recognized.
Co-authored-by: Lynne <dev@lynne.ee>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This patch replaces the transform used in AAC with lavu/tx and removes
the limitation on only being able to decode 960-sample files
with the float decoder.
This commit also removes a whole bunch of unnecessary and slow
lifting steps the decoder did to compensate for the poor accuracy
of the old integer transformation code.
Overall float decoder speedup on Zen 3 for 64kbps: 32%
Possible since 48ac225db2.
Furthermore, the current code would not work on mips
in case ff_lsp2polyf() were used outside of lsp.c,
because it is not compiled on mips since commit
3827a86eac at all;
instead it is overridden with a static av_always_inline
function which only works for the callers in lsp.c.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The patch fixes the bugs that occurred when running
fate-checkasm-hevc_pel on MIPS paltform.
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This patch fixes a bug where the fate-checkasm-motion fails when
h is not a multiple of 8.
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Reviewed-by: Peter Ross <pross@xvid.org>
Reviewed-by: Ronald S. Bultje <rsbultje@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
The latest commit of Loongson MMI macro replaces were incorrect.
It makes a mass of green tints on HEVC videos when playing. I've
compared it with the older MMI implementation, and found out that
several lines have been replaced by wrong macros.
Signed-off-by: Qi Tiezheng <qitiezheng@360.cn>
Reviewed-by: Shiyou Yin <yinshiyou-hf@loongson.cn>
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
