For anamorphic videos, enabling this option leads to adjustment of
output dimensions to obtain square pixels when the user requests
proportional scaling through either of the w/h expressions or
force_original_aspect_ratio.
Output SAR is always reset to 1.
Option added to scale, scale_cuda, scale_npp & scale_vaapi.
libplacebo already has a similar option with different semantics,
scale_vt and scale_vulkan don't implement force_oar, so for these
three filters, I've made minimal changes needed to not break building
or change output.
This patch is analogous to 20f9727018:
It hides the internal part of AVFilter by adding a new internal
structure FFFilter (declared in filters.h) that has an AVFilter
as its first member; the internal part of AVFilter is moved to
this new structure.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Results in over-read of the array. Fortunately, the excess element was
never actually used, but it still triggers ASAN (and could in theory trigger
a segfault).
Fixes: 04ce01df0b
Most logic from this filter has been co-opted into swscale itself,
allowing the resulting filter to be substantially simpler as it no
longer has to worry about context initialization, interlacing, etc.
Sponsored-by: Sovereign Tech Fund
Signed-off-by: Niklas Haas <git@haasn.dev>
The current logic hard-coded a check for v_sub == 1. We can extend this
logic slightly to cover the case of interlaced 4:1:0 (which has v_sub ==
2).
Here is a diagram explaining this scenario (with center-siting):
a a a a a a a a
b b b b b b b b
X X
a a a a a a a a
b b b b b b b b
a a a a a a a a
b b b b b b b b
Y Y
a a a a a a a a
b b b b b b b b
a = even luma rows
b = odd luma rows
X = even chroma sample
Y = odd chroma sample
In progressive mode, the chroma samples sit at (384, 384) respectively.
Relative to the 8x4 grid of even luma samples (a), the X sample sits at:
h_chr_pos = 384
v_chr_pos = 192
Relative to the 8x4 grid of odd luma samples (b), the Y sample sits at:
h_chr_pos = 384
v_chr_pos = 576
The new code calculates the correct values in all circumstances.
Currently, this just functions as a more principled and user-friendly
replacement for the (undocumented and hard to use) *_chr_pos fields.
However, the goal is to automatically infer these values from the input
frames' chroma location, and deprecate the manual use of *_chr_pos
altogether. (Indeed, my plans for an swscale replacement will most
likely also end up limiting the set of legal chroma locations to those
permissible by AVFrame properties)
The current logic only fixes it when the user does not explicitly
specify the chroma location. However, this does not make a lot of sense.
Since there is no way to specify this property per-field, it effectively
*prevents* the user from being able to correctly scale interlaced frames
with top-aligned chroma.
It makes more sense to consider the user setting in the progressive case
only, and automatically adapt it to the correct interlaced field
positions, following the details of the MPEG specification.
scale_frame() inconsistently handled the lifetime of `in`. Fixes a
possible double free and a possible memory leak.
The new code always has `scale_frame` take over ownership of the input
frame. I first tried writing this code in a way where the calling code
retains ownership, but this is nontrivial due to the presence of the
no-op short-circuit condition in which the input frame is directly
returned. (As an alternative, we could use av_frame_clone() instead, but
I wanted to avoid touching the original behavior in this commit)
This filter needs to be marked as having only one input by default, with
AVFILTER_FLAG_DYNAMIC_INPUTS allowing the extra input to be added at
init() time.
Fixes: bb80445813
This is automatically enabled if the width/height expressions reference
any ref_* variable. This will ultimately serve as a more principled
replacement for the fundamentally broken scale2ref.
See-Also: https://trac.ffmpeg.org/ticket/10795
There are lots of files that don't need it: The number of object
files that actually need it went down from 2011 to 884 here.
Keep it for external users in order to not cause breakages.
Also improve the other headers a bit while just at it.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Makes it robust against adding fields before it, which will be useful in
following commits.
Majority of the patch generated by the following Coccinelle script:
@@
typedef AVOption;
identifier arr_name;
initializer list il;
initializer list[8] il1;
expression tail;
@@
AVOption arr_name[] = { il, { il1,
- tail
+ .unit = tail
}, ... };
with some manual changes, as the script:
* has trouble with options defined inside macros
* sometimes does not handle options under an #else branch
* sometimes swallows whitespace
This filter will always accept any input format, even if the user sets
a specific in_range/in_color_matrix. This is to preserve status quo with
current behavior, where passing a specific in_color_matrix merely
overrides the incoming frames' attributes. (Use `vf_format` to force
a specific input range)
Because changing colorspace and color_range now requires reconfiguring
the link, we can lift sws_setColorspaceDetails out of scale_frame and
into config_props. (This will also get re-called if the input frame
properties change)
Unnecessary since acf63d5350;
also avoids relocations.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
When using vf_scale to force a specific output color space, also tag
this on the AVFrame. (Mirroring existing logic for output range)
Move the sanity fix for RGB after the new assignment, to avoid leaking
bogus YUV colorspace metadata for RGB spaces.
No need to write a custom string parser when we can just use an integer
option with preset values. The various bits of fallback logic are wholly
redundant with equivalent logic already inside sws_getCoefficients.
Note: I disallowed setting 'out_color_matrix=auto', because this does
not do anything meaningful in the current code (just hard-codes
AVCOL_SPC_BT470BG fallback).
This logic only covers the case of yuv420p. Extend this logic to cover
*all* vertically subsampled YUV formats, which require the same
interlaced scaling logic.
Fortunately, we can get away with re-using the same code for both JPEG
and MPEG range YUV, because the only difference here is the horizontal
alignment. (Which I omit touching for now, to avoid introducing possibly
unintended changes in default behavior)
These fields are supposed to store information about the packet the
frame was decoded from, specifically the byte offset it was stored at
and its size.
However,
- the fields are highly ad-hoc - there is no strong reason why
specifically those (and not any other) packet properties should have a
dedicated field in AVFrame; unlike e.g. the timestamps, there is no
fundamental link between coded packet offset/size and decoded frames
- they only make sense for frames produced by decoding demuxed packets,
and even then it is not always the case that the encoded data was
stored in the file as a contiguous sequence of bytes (in order for pos
to be well-defined)
- pkt_pos was added without much explanation, apparently to allow
passthrough of this information through lavfi in order to handle byte
seeking in ffplay. That is now implemented using arbitrary user data
passthrough in AVFrame.opaque_ref.
- several filters use pkt_pos as a variable available to user-supplied
expressions, but there seems to be no established motivation for using them.
- pkt_size was added for use in ffprobe, but that too is now handled
without using this field. Additonally, the values of this field
produced by libavcodec are flawed, as described in the previous
ffprobe conversion commit.
In summary - these fields are ill-defined and insufficiently motivated,
so deprecate them.
Instead of the potentially adjusted ones. Otherwise, if config_props() is
called again and if using force_original_aspect_ratio, the already adjusted
values could be altered again.
Example command line
scale=size=1920x1000:force_original_aspect_ratio=decrease:force_divisible_by=2
user value 1920x1000 -> 1920x798 on init_dict() -> 1918x798 on frame
change when eval_mode == EVAL_MODE_INIT, which after e645a1ddb9 could be at the
very first frame.
Signed-off-by: James Almer <jamrial@gmail.com>
While swscale can be reconfigured with sws_setColorspaceDetails,
the in/out ranges also need to be set before calling
sws_init_context, otherwise the initialization might choose
fastpaths that don't take the ranges into account.
Therefore, look at in->color_range too, when deciding on whether
the scaler needs to be reconfigured.
Add a new member variable for keeping track of this, for being
able to differentiate between whether the scale filter parameter
"in_range" has been set (which should override whatever the input
frame has set) or whether it has been configured based on the
latest frame (which should trigger reconfiguring the scaler if
the input frame ranges change).
Fixes: Ticket #9576
Signed-off-by: Martin Storsjö <martin@martin.st>
If one looks at the many query_formats callbacks in existence,
one will immediately recognize that there is one type of default
callback for video and a slightly different default callback for
audio: It is "return ff_set_common_formats_from_list(ctx, pix_fmts);"
for video with a filter-specific pix_fmts list. For audio, it is
the same with a filter-specific sample_fmts list together with
ff_set_common_all_samplerates() and ff_set_common_all_channel_counts().
This commit allows to remove the boilerplate query_formats callbacks
by replacing said callback with a union consisting the old callback
and pointers for pixel and sample format arrays. For the not uncommon
case in which these lists only contain a single entry (besides the
sentinel) enum AVPixelFormat and enum AVSampleFormat fields are also
added to the union to store them directly in the AVFilter,
thereby avoiding a relocation.
The state of said union will be contained in a new, dedicated AVFilter
field (the nb_inputs and nb_outputs fields have been shrunk to uint8_t
in order to create a hole for this new field; this is no problem, as
the maximum of all the nb_inputs is four; for nb_outputs it is only
two).
The state's default value coincides with the earlier default of
query_formats being unset, namely that the filter accepts all formats
(and also sample rates and channel counts/layouts for audio)
provided that these properties agree coincide for all inputs and
outputs.
By using different union members for audio and video filters
the type-unsafety of using the same functions for audio and video
lists will furthermore be more confined to formats.c than before.
When the new fields are used, they will also avoid allocations:
Currently something nearly equivalent to ff_default_query_formats()
is called after every successful call to a query_formats callback;
yet in the common case that the newly allocated AVFilterFormats
are not used at all (namely if there are no free links) these newly
allocated AVFilterFormats are freed again without ever being used.
Filters no longer using the callback will not exhibit this any more.
Reviewed-by: Paul B Mahol <onemda@gmail.com>
Reviewed-by: Nicolas George <george@nsup.org>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
