The aim of this is twofold: a) Clang warns when setting a deprecated
field in a definition and because several of the widely set
AVCodec fields are deprecated, one gets several hundred warnings
from Clang for an ordinary build. Yet fortunately Clang (unlike GCC)
allows to disable deprecation warnings inside a definition, so
that one can create simple macros to set these fields that also suppress
deprecation warnings for Clang. This has already been done in
fdff1b9cbf for AVCodec.channel_layouts.
b) Using macros will allow to easily migrate these fields to internal ones.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
I went through all codecs and put them into five basic categories:
1. JPEG range only
2. MPEG range only
3. Explicitly tagged
4. Broken (codec supports both but encoder ignores tags)
5. N/A (headerless or pseudo-formats)
Filters in category 5 remain untouched. The rest gain an explicit
assignment of their supported color ranges, with codecs in category
4 being set to MPEG-only for safety.
It might be considered redundant to distinguish between 0 (category 5)
and MPEG+JPEG (category 3), but in doing so we effectively communicate
that we can guarantee that these tags will be encoded, which is distinct
from the situation where there are some codecs that simply don't have
tagging or implied semantics (e.g. rawvideo).
A full list of codecs follows:
JPEG range only:
- amv
- roqvideo
MPEG range only:
- asv1, asv2
- avui
- cfhd
- cljr
- dnxhd
- dvvideo
- ffv1
- flv
- h261, h263, h263p
- {h263,vp8}_v4l2m2m
- huffyuv, ffvhuff
- jpeg2000
- libopenjpeg
- libtheora
- libwebp, libwebp_anim
- libx262
- libxavs, libxavs2
- libxvid
- mpeg1video, mpeg2video
- mpeg2_qsv
- mpeg2_vaapi
- mpeg4, msmpeg4, msmpeg4v2, wmv1, wmv2
- mpeg4_omx
- prores, prores_aw, prores_ks
- rv10, rv20
- snow
- speedhq
- svq1
- tiff
- utvideo
Explicitly tagged (MPEG/JPEG):
- {av1,h264,hevc}_nvenc
- {av1,h264,hevc}_vaapi
- {av1,h264,hevc,vp8,vp9,mpeg4}_mediacodec
- {av1,h264,hevc,vp9}_qsv
- h264_amf
- {h264,hevc,prores}_videotoolbox
- libaom-av1
- libkvazaar
- libopenh264
- librav1e
- libsvtav1
- libvpx, libvpx-vp9
- libx264
- libx265
- ljpeg
- mjpeg
- vc2
Broken (encoder ignores tags):
- {av1,hevc}_amf
- {h264,hevc,mpeg4}_v4l2m2m
- h264_omx
- libxeve
- magicyuv
- {vp8,vp9,mjpeg}_vaapi
N/A:
- ayuv, yuv4, y41p, v308, v210, v410, v408 (headerless)
- pgmyuv (headerless)
- rawvideo, bitpacked (headerless)
- vnull, wrapped_avframe (pseudocodecs)
Makes it robust against adding fields before it, which will be useful in
following commits.
Majority of the patch generated by the following Coccinelle script:
@@
typedef AVOption;
identifier arr_name;
initializer list il;
initializer list[8] il1;
expression tail;
@@
AVOption arr_name[] = { il, { il1,
- tail
+ .unit = tail
}, ... };
with some manual changes, as the script:
* has trouble with options defined inside macros
* sometimes does not handle options under an #else branch
* sometimes swallows whitespace
Unnecessary since acf63d5350;
also avoids relocations.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
AV_PIX_FMT_VUYX is used in FFmpeg and MFX_FOURCC_AYUV is used in the SDK
Reviewed-by: Philip Langdale <philipl@overt.org>
Signed-off-by: Haihao Xiang <haihao.xiang@intel.com>
It reduces typing: Before this patch, there were 105 codecs
whose long_name-definition exceeded the 80 char line length
limit. Now there are only nine of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
If qsv hwdevice is available, use the mfxLoader handle in qsv hwdevice
to create mfx session. Otherwise create mfx session with a new mfxLoader
handle.
This is in preparation for oneVPL support
The following Cflags has been added to libmfx.pc, so mfx/ prefix is no
longer needed when including mfx headers in FFmpeg.
Cflags: -I${includedir} -I${includedir}/mfx
Some old versions of libmfx have the following Cflags in libmfx.pc
Cflags: -I${includedir}
We may add -I${includedir}/mfx to CFLAGS when running 'configure
--enable-libmfx' for old versions of libmfx, if so, mfx headers without
mfx/ prefix can be included too.
If libmfx comes without pkg-config support, we may do a small change to
the settings of the environment(e.g. set -I/opt/intel/mediasdk/include/mfx
instead of -I/opt/intel/mediasdk/include to CFLAGS), then the build can
find the mfx headers without mfx/ prefix
After applying this change, we won't need to change #include for mfx
headers when mfx headers are installed under a new directory.
This is in preparation for oneVPL support (mfx headers in oneVPL are
installed under vpl directory)
This is in preparation of switching the default init-thread-safety
to a codec being init-thread-safe.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This structure is no longer declared in a public header,
so using an FF-prefix is more appropriate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also move FF_CODEC_TAGS_END as well as struct AVCodecDefault.
This reduces the amount of files that have to include internal.h
(which comes with quite a lot of indirect inclusions), as e.g.
most encoders don't need it. It is furthemore in preparation
for moving the private part of AVCodec out of the public codec.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Given that the AVCodec.next pointer has now been removed, most of the
AVCodecs are not modified at all any more and can therefore be made
const (as this patch does); the only exceptions are the very few codecs
for external libraries that have a init_static_data callback.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
All of these encoders can accept libmfx surfaces directly in a hardware
frames context, or they can accept software frames if a suitable device
is supplied to use.
