I went through all codecs and put them into five basic categories:
1. JPEG range only
2. MPEG range only
3. Explicitly tagged
4. Broken (codec supports both but encoder ignores tags)
5. N/A (headerless or pseudo-formats)
Filters in category 5 remain untouched. The rest gain an explicit
assignment of their supported color ranges, with codecs in category
4 being set to MPEG-only for safety.
It might be considered redundant to distinguish between 0 (category 5)
and MPEG+JPEG (category 3), but in doing so we effectively communicate
that we can guarantee that these tags will be encoded, which is distinct
from the situation where there are some codecs that simply don't have
tagging or implied semantics (e.g. rawvideo).
A full list of codecs follows:
JPEG range only:
- amv
- roqvideo
MPEG range only:
- asv1, asv2
- avui
- cfhd
- cljr
- dnxhd
- dvvideo
- ffv1
- flv
- h261, h263, h263p
- {h263,vp8}_v4l2m2m
- huffyuv, ffvhuff
- jpeg2000
- libopenjpeg
- libtheora
- libwebp, libwebp_anim
- libx262
- libxavs, libxavs2
- libxvid
- mpeg1video, mpeg2video
- mpeg2_qsv
- mpeg2_vaapi
- mpeg4, msmpeg4, msmpeg4v2, wmv1, wmv2
- mpeg4_omx
- prores, prores_aw, prores_ks
- rv10, rv20
- snow
- speedhq
- svq1
- tiff
- utvideo
Explicitly tagged (MPEG/JPEG):
- {av1,h264,hevc}_nvenc
- {av1,h264,hevc}_vaapi
- {av1,h264,hevc,vp8,vp9,mpeg4}_mediacodec
- {av1,h264,hevc,vp9}_qsv
- h264_amf
- {h264,hevc,prores}_videotoolbox
- libaom-av1
- libkvazaar
- libopenh264
- librav1e
- libsvtav1
- libvpx, libvpx-vp9
- libx264
- libx265
- ljpeg
- mjpeg
- vc2
Broken (encoder ignores tags):
- {av1,hevc}_amf
- {h264,hevc,mpeg4}_v4l2m2m
- h264_omx
- libxeve
- magicyuv
- {vp8,vp9,mjpeg}_vaapi
N/A:
- ayuv, yuv4, y41p, v308, v210, v410, v408 (headerless)
- pgmyuv (headerless)
- rawvideo, bitpacked (headerless)
- vnull, wrapped_avframe (pseudocodecs)
Unnecessary since acf63d5350;
also avoids relocations.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
These defines are also used in other contexts than just AVCodecContext
ones, e.g. in libavformat. Furthermore, given that these defines are
public, the AV-prefix is the right one, so deprecate (and not just move)
the FF-macros.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It reduces typing: Before this patch, there were 105 codecs
whose long_name-definition exceeded the 80 char line length
limit. Now there are only nine of them.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is in preparation of switching the default init-thread-safety
to a codec being init-thread-safe.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This is possible, because every given FFCodec has to implement
exactly one of these. Doing so decreases sizeof(FFCodec) and
therefore decreases the size of the binary.
Notice that in case of position-independent code the decrease
is in .data.rel.ro, so that this translates to decreased
memory consumption.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
This structure is no longer declared in a public header,
so using an FF-prefix is more appropriate.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Up until now, codec.h contains both public and private parts
of AVCodec. This exposes the internals of AVCodec to users
and leads them into the temptation of actually using them
and forces us to forward-declare structures and types that
users can't use at all.
This commit changes this by adding a new structure FFCodec to
codec_internal.h that extends AVCodec, i.e. contains the public
AVCodec as first member; the private fields of AVCodec are moved
to this structure, leaving codec.h clean.
Reviewed-by: Anton Khirnov <anton@khirnov.net>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also move FF_CODEC_TAGS_END as well as struct AVCodecDefault.
This reduces the amount of files that have to include internal.h
(which comes with quite a lot of indirect inclusions), as e.g.
most encoders don't need it. It is furthemore in preparation
for moving the private part of AVCodec out of the public codec.h.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Given that the AVCodec.next pointer has now been removed, most of the
AVCodecs are not modified at all any more and can therefore be made
const (as this patch does); the only exceptions are the very few codecs
for external libraries that have a init_static_data callback.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Signed-off-by: James Almer <jamrial@gmail.com>
Currently if the frame buffers are full, the frame is unrefed and
dropped. Instead buffer the frame so that it is enqueued in the
next v4l2_receive_packet() call. The behavior was observed on
DragonBoard 410c.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
This commit follows the same logic as 061a0c14bb, but for the encode API: The
new public encoding API will no longer be a wrapper around the old deprecated
one, and the internal API used by the encoders now consists of a single
receive_packet() callback that pulls frames as required.
amf encoders adapted by James Almer
librav1e encoder adapted by James Almer
nvidia encoders adapted by James Almer
MediaFoundation encoders adapted by James Almer
vaapi encoders adapted by Linjie Fu
v4l2_m2m encoders adapted by Andriy Gelman
Signed-off-by: James Almer <jamrial@gmail.com>
Inside a function, the second ; in a double ;; is a null statement, but
outside of functions a double ;; is simply invalid C that compilers
happen to accept. v4l2_m2m_enc.c contained several ;; as a result of
macro-expansion. So change the underlying macro so that it doesn't
happen any longer.
This fixes warnings when compiling with -pedantic: "ISO C does not allow
extra ‘;’ outside of a function".
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@gmail.com>
Hard coded parameters for qmin and qmax are currently used to initialize
v4l2_m2m device. This commit uses values from avctx->{qmin,qmax} if they
are set.
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Without this setting, bitrate and qmin/qmax options have no
effect on the s5p-mfc hardware encoder.
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Currently the user gets unhelpful warnings when some default parameters
are not supported by the device. The verbosity of these log messages has
been changed to AV_LOG_DEBUG.
Reviewed-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
When flushing the capture buffers, the driver may send a V4L2_EVENT_EOS
to notify that draining is completed. Currently, v4l2_m2m does not
subscribe to this event, which can cause some devices (i.e. imx8qm) to
hang at the end of encoding/decoding. Support for handling the event is
added in this commit.
Some devices may not signal V4L2_EVENT_EOS. This is logged as a warning
message during initialization and not treated as a fatal error.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Currently the driver's frame period is incorrectly set to the frame
rate. This is fixed in the commit.
Signed-off-by: Ming Qian <ming.qian@nxp.com>
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Before this commit s->avctx == NULL was used to infer that an encoder is
being initialzed. Code readability has been improved by directly using
!av_codec_is_decoder() instead.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Fixes#8079
During initialization of a v4l2m2m device, the configured pix_fmt can be
different to the pix_fmt of the encoder (i.e. avctx->pix_fmt).
For example on the Odroid XU4:
./ffmpeg -f lavfi -i yuvtestsrc -codec:v h264_v4l2m2m out.h264
will configure the v4l2 encoder to pix_fmt nv21, whereas the input
frames will be yuv444p.
This commit checks that the configured v4l2 pix_fmt on device is the
same as avctx->pix_fmt. If they are different the initialization fails
and an error is returned. Tested on RPI4 and Odroid XU4.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
Fixes the following warnings:
libavcodec/v4l2_m2m_enc.c:51:12: warning: missing braces around initializer
libavcodec/v4l2_m2m_enc.c:71:12: warning: missing braces around initializer
Refcount all of the context information. This also fixes a potential
segmentation fault when accessing freed memory (buffer returned after
the codec has been closed).
Tested-by: Jorge Ramirez-Ortiz <jorge.ramirez.ortiz@gmail.com>
This is pretty much a requirement for any codec that handles modern
codecs like h264, but it was missing. Potentially could lead to issues
like missing frames at the end of a stream.
Tested-by: Jorge Ramirez <jorge.ramirez-ortiz@linaro.org>
Explicitly identify decoder/encoder wrappers with a common name. This
saves API users from guessing by the name suffix. For example, they
don't have to guess that "h264_qsv" is the h264 QSV implementation, and
instead they can just check the AVCodec .codec and .wrapper_name fields.
Explicitly mark AVCodec entries that are hardware decoders or most
likely hardware decoders with new AV_CODEC_CAPs. The purpose is allowing
API users listing hardware decoders in a more generic way. The proposed
AVCodecHWConfig does not provide this information fully, because it's
concerned with decoder configuration, not information about the fact
whether the hardware is used or not.
AV_CODEC_CAP_HYBRID exists specifically for QSV, which can have software
implementations in case the hardware is not capable.
Based on a patch by Philip Langdale <philipl@overt.org>.
Merges Libav commit 47687a2f8a.
This patchset enhances Alexis Ballier's original patch and validates
it using Qualcomm's Venus hardware (driver recently landed upstream
[1]).
This has been tested on Qualcomm's DragonBoard 410c and 820c
Configure/make scripts have been validated on Ubuntu 10.04 and
16.04.
Tested decoders:
- h264
- h263
- mpeg4
- vp8
- vp9
- hevc
Tested encoders:
- h264
- h263
- mpeg4
Tested transcoding (concurrent encoding/decoding)
Some of the changes introduced:
- v4l2: code cleanup and abstractions added
- v4l2: follow the new encode/decode api.
- v4l2: fix display size for NV12 output pool.
- v4l2: handle EOS (EPIPE and draining)
- v4l2: vp8 and mpeg4 decoding and encoding.
- v4l2: hevc and vp9 support.
- v4l2: generate EOF on dequeue errors.
- v4l2: h264_mp4toannexb filtering.
- v4l2: fixed make install and fate issues.
- v4l2: codecs enabled/disabled depending on pixfmt defined
- v4l2: pass timebase/framerate to the context
- v4l2: runtime decoder reconfiguration.
- v4l2: add more frame information
- v4l2: free hardware resources on last reference being released
- v4l2: encoding: disable b-frames for upstreaming (patch required)
[1] https://lwn.net/Articles/697956/
System Level view:
v42l_m2m_enc/dec --> v4l2_m2m --> v4l2_context --> v4l2_buffers
Reviewed-by: Jorge Ramirez <jorge.ramirez-ortiz@linaro.org>
Reviewed-by: Alexis Ballier <aballier@gentoo.org>
Tested-by: Jorge Ramirez <jorge.ramirez-ortiz@linaro.org>
Signed-off-by: wm4 <nfxjfg@googlemail.com>
