runtime: add general suspendG/resumeG

Currently, the process of suspending a goroutine is tied to stack
scanning. In preparation for non-cooperative preemption, this CL
abstracts this into general purpose suspendG/resumeG functions.

suspendG and resumeG closely follow the existing scang and restartg
functions with one exception: the addition of a _Gpreempted status.
Currently, preemption tasks (stack scanning) are carried out by the
target goroutine if it's in _Grunning. In this new approach, the task
is always carried out by the goroutine that called suspendG. Thus, we
need a reliable way to drive the target goroutine out of _Grunning
until the requesting goroutine is ready to resume it. The new
_Gpreempted state provides the handshake: when a runnable goroutine
responds to a preemption request, it now parks itself and enters
_Gpreempted. The requesting goroutine races to put it in _Gwaiting,
which gives it ownership, but also the responsibility to start it
again.

This CL adds several TODOs about improving the synchronization on the
G status. The existing code already has these problems; we're just
taking note of them.

The next CL will remove the now-dead scang and preemptscan.

For #10958, #24543.

Change-Id: I16dbf87bea9d50399cc86719c156f48e67198f16
Reviewed-on: https://go-review.googlesource.com/c/go/+/201137
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>

src/runtime/mgcmark.go

@@ -211,14 +211,24 @@ func markroot(gcw *gcWork, i uint32) {
 				userG.waitreason = waitReasonGarbageCollectionScan
 			}
 
-			// TODO: scang blocks until gp's stack has
+			// TODO: suspendG blocks (and spins) until gp
-			// been scanned, which may take a while for
+			// stops, which may take a while for
 			// running goroutines. Consider doing this in
 			// two phases where the first is non-blocking:
 			// we scan the stacks we can and ask running
 			// goroutines to scan themselves; and the
 			// second blocks.
-			scang(gp, gcw)
+			stopped := suspendG(gp)
+			if stopped.dead {
+				gp.gcscandone = true
+				return
+			}
+			if gp.gcscandone {
+				throw("g already scanned")
+			}
+			scanstack(gp, gcw)
+			gp.gcscandone = true
+			resumeG(stopped)
 
 			if selfScan {
 				casgstatus(userG, _Gwaiting, _Grunning)

src/runtime/preempt.go

@@ -0,0 +1,225 @@
+// Copyright 2019 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+// Goroutine preemption
+//
+// A goroutine can be preempted at any safe-point. Currently, there
+// are a few categories of safe-points:
+//
+// 1. A blocked safe-point occurs for the duration that a goroutine is
+//    descheduled, blocked on synchronization, or in a system call.
+//
+// 2. Synchronous safe-points occur when a running goroutine checks
+//    for a preemption request.
+//
+// At both blocked and synchronous safe-points, a goroutine's CPU
+// state is minimal and the garbage collector has complete information
+// about its entire stack. This makes it possible to deschedule a
+// goroutine with minimal space, and to precisely scan a goroutine's
+// stack.
+//
+// Synchronous safe-points are implemented by overloading the stack
+// bound check in function prologues. To preempt a goroutine at the
+// next synchronous safe-point, the runtime poisons the goroutine's
+// stack bound to a value that will cause the next stack bound check
+// to fail and enter the stack growth implementation, which will
+// detect that it was actually a preemption and redirect to preemption
+// handling.
+
+package runtime
+
+type suspendGState struct {
+	g *g
+
+	// dead indicates the goroutine was not suspended because it
+	// is dead. This goroutine could be reused after the dead
+	// state was observed, so the caller must not assume that it
+	// remains dead.
+	dead bool
+
+	// stopped indicates that this suspendG transitioned the G to
+	// _Gwaiting via g.preemptStop and thus is responsible for
+	// readying it when done.
+	stopped bool
+}
+
+// suspendG suspends goroutine gp at a safe-point and returns the
+// state of the suspended goroutine. The caller gets read access to
+// the goroutine until it calls resumeG.
+//
+// It is safe for multiple callers to attempt to suspend the same
+// goroutine at the same time. The goroutine may execute between
+// subsequent successful suspend operations. The current
+// implementation grants exclusive access to the goroutine, and hence
+// multiple callers will serialize. However, the intent is to grant
+// shared read access, so please don't depend on exclusive access.
+//
+// This must be called from the system stack and the user goroutine on
+// the current M (if any) must be in a preemptible state. This
+// prevents deadlocks where two goroutines attempt to suspend each
+// other and both are in non-preemptible states. There are other ways
+// to resolve this deadlock, but this seems simplest.
+//
+// TODO(austin): What if we instead required this to be called from a
+// user goroutine? Then we could deschedule the goroutine while
+// waiting instead of blocking the thread. If two goroutines tried to
+// suspend each other, one of them would win and the other wouldn't
+// complete the suspend until it was resumed. We would have to be
+// careful that they couldn't actually queue up suspend for each other
+// and then both be suspended. This would also avoid the need for a
+// kernel context switch in the synchronous case because we could just
+// directly schedule the waiter. The context switch is unavoidable in
+// the signal case.
+//
+//go:systemstack
+func suspendG(gp *g) suspendGState {
+	if mp := getg().m; mp.curg != nil && readgstatus(mp.curg) == _Grunning {
+		// Since we're on the system stack of this M, the user
+		// G is stuck at an unsafe point. If another goroutine
+		// were to try to preempt m.curg, it could deadlock.
+		throw("suspendG from non-preemptible goroutine")
+	}
+
+	// See https://golang.org/cl/21503 for justification of the yield delay.
+	const yieldDelay = 10 * 1000
+	var nextYield int64
+
+	// Drive the goroutine to a preemption point.
+	stopped := false
+	for i := 0; ; i++ {
+		switch s := readgstatus(gp); s {
+		default:
+			if s&_Gscan != 0 {
+				// Someone else is suspending it. Wait
+				// for them to finish.
+				//
+				// TODO: It would be nicer if we could
+				// coalesce suspends.
+				break
+			}
+
+			dumpgstatus(gp)
+			throw("invalid g status")
+
+		case _Gdead:
+			// Nothing to suspend.
+			//
+			// preemptStop may need to be cleared, but
+			// doing that here could race with goroutine
+			// reuse. Instead, goexit0 clears it.
+			return suspendGState{dead: true}
+
+		case _Gcopystack:
+			// The stack is being copied. We need to wait
+			// until this is done.
+
+		case _Gpreempted:
+			// We (or someone else) suspended the G. Claim
+			// ownership of it by transitioning it to
+			// _Gwaiting.
+			if !casGFromPreempted(gp, _Gpreempted, _Gwaiting) {
+				break
+			}
+
+			// We stopped the G, so we have to ready it later.
+			stopped = true
+
+			s = _Gwaiting
+			fallthrough
+
+		case _Grunnable, _Gsyscall, _Gwaiting:
+			// Claim goroutine by setting scan bit.
+			// This may race with execution or readying of gp.
+			// The scan bit keeps it from transition state.
+			if !castogscanstatus(gp, s, s|_Gscan) {
+				break
+			}
+
+			// Clear the preemption request. It's safe to
+			// reset the stack guard because we hold the
+			// _Gscan bit and thus own the stack.
+			gp.preemptStop = false
+			gp.preempt = false
+			gp.stackguard0 = gp.stack.lo + _StackGuard
+
+			// The goroutine was already at a safe-point
+			// and we've now locked that in.
+			//
+			// TODO: It would be much better if we didn't
+			// leave it in _Gscan, but instead gently
+			// prevented its scheduling until resumption.
+			// Maybe we only use this to bump a suspended
+			// count and the scheduler skips suspended
+			// goroutines? That wouldn't be enough for
+			// {_Gsyscall,_Gwaiting} -> _Grunning. Maybe
+			// for all those transitions we need to check
+			// suspended and deschedule?
+			return suspendGState{g: gp, stopped: stopped}
+
+		case _Grunning:
+			// Optimization: if there is already a pending preemption request
+			// (from the previous loop iteration), don't bother with the atomics.
+			if gp.preemptStop && gp.preempt && gp.stackguard0 == stackPreempt {
+				break
+			}
+
+			// Temporarily block state transitions.
+			if !castogscanstatus(gp, _Grunning, _Gscanrunning) {
+				break
+			}
+
+			// Request synchronous preemption.
+			gp.preemptStop = true
+			gp.preempt = true
+			gp.stackguard0 = stackPreempt
+
+			// TODO: Inject asynchronous preemption.
+
+			casfrom_Gscanstatus(gp, _Gscanrunning, _Grunning)
+		}
+
+		// TODO: Don't busy wait. This loop should really only
+		// be a simple read/decide/CAS loop that only fails if
+		// there's an active race. Once the CAS succeeds, we
+		// should queue up the preemption (which will require
+		// it to be reliable in the _Grunning case, not
+		// best-effort) and then sleep until we're notified
+		// that the goroutine is suspended.
+		if i == 0 {
+			nextYield = nanotime() + yieldDelay
+		}
+		if nanotime() < nextYield {
+			procyield(10)
+		} else {
+			osyield()
+			nextYield = nanotime() + yieldDelay/2
+		}
+	}
+}
+
+// resumeG undoes the effects of suspendG, allowing the suspended
+// goroutine to continue from its current safe-point.
+func resumeG(state suspendGState) {
+	if state.dead {
+		// We didn't actually stop anything.
+		return
+	}
+
+	gp := state.g
+	switch s := readgstatus(gp); s {
+	default:
+		dumpgstatus(gp)
+		throw("unexpected g status")
+
+	case _Grunnable | _Gscan,
+		_Gwaiting | _Gscan,
+		_Gsyscall | _Gscan:
+		casfrom_Gscanstatus(gp, s, s&^_Gscan)
+	}
+
+	if state.stopped {
+		// We stopped it, so we need to re-schedule it.
+		ready(gp, 0, true)
+	}
+}

src/runtime/proc.go

@@ -738,7 +738,8 @@ func casfrom_Gscanstatus(gp *g, oldval, newval uint32) {
 	case _Gscanrunnable,
 		_Gscanwaiting,
 		_Gscanrunning,
-		_Gscansyscall:
+		_Gscansyscall,
+		_Gscanpreempted:
 		if newval == oldval&^_Gscan {
 			success = atomic.Cas(&gp.atomicstatus, oldval, newval)
 		}
@@ -844,6 +845,28 @@ func casgcopystack(gp *g) uint32 {
 	}
 }
 
+// casGToPreemptScan transitions gp from _Grunning to _Gscan|_Gpreempted.
+//
+// TODO(austin): This is the only status operation that both changes
+// the status and locks the _Gscan bit. Rethink this.
+func casGToPreemptScan(gp *g, old, new uint32) {
+	if old != _Grunning || new != _Gscan|_Gpreempted {
+		throw("bad g transition")
+	}
+	for !atomic.Cas(&gp.atomicstatus, _Grunning, _Gscan|_Gpreempted) {
+	}
+}
+
+// casGFromPreempted attempts to transition gp from _Gpreempted to
+// _Gwaiting. If successful, the caller is responsible for
+// re-scheduling gp.
+func casGFromPreempted(gp *g, old, new uint32) bool {
+	if old != _Gpreempted || new != _Gwaiting {
+		throw("bad g transition")
+	}
+	return atomic.Cas(&gp.atomicstatus, _Gpreempted, _Gwaiting)
+}
+
 // scang blocks until gp's stack has been scanned.
 // It might be scanned by scang or it might be scanned by the goroutine itself.
 // Either way, the stack scan has completed when scang returns.
@@ -1676,7 +1699,6 @@ func oneNewExtraM() {
 	gp.syscallsp = gp.sched.sp
 	gp.stktopsp = gp.sched.sp
 	gp.gcscanvalid = true
-	gp.gcscandone = true
 	// malg returns status as _Gidle. Change to _Gdead before
 	// adding to allg where GC can see it. We use _Gdead to hide
 	// this from tracebacks and stack scans since it isn't a
@@ -2838,6 +2860,32 @@ func gopreempt_m(gp *g) {
 	goschedImpl(gp)
 }
 
+// preemptPark parks gp and puts it in _Gpreempted.
+//
+//go:systemstack
+func preemptPark(gp *g) {
+	if trace.enabled {
+		traceGoPark(traceEvGoBlock, 0)
+	}
+	status := readgstatus(gp)
+	if status&^_Gscan != _Grunning {
+		dumpgstatus(gp)
+		throw("bad g status")
+	}
+	gp.waitreason = waitReasonPreempted
+	// Transition from _Grunning to _Gscan|_Gpreempted. We can't
+	// be in _Grunning when we dropg because then we'd be running
+	// without an M, but the moment we're in _Gpreempted,
+	// something could claim this G before we've fully cleaned it
+	// up. Hence, we set the scan bit to lock down further
+	// transitions until we can dropg.
+	casGToPreemptScan(gp, _Grunning, _Gscan|_Gpreempted)
+	dropg()
+	casfrom_Gscanstatus(gp, _Gscan|_Gpreempted, _Gpreempted)
+
+	schedule()
+}
+
 // Finishes execution of the current goroutine.
 func goexit1() {
 	if raceenabled {
@@ -2861,6 +2909,7 @@ func goexit0(gp *g) {
 	locked := gp.lockedm != 0
 	gp.lockedm = 0
 	_g_.m.lockedg = 0
+	gp.preemptStop = false
 	gp.paniconfault = false
 	gp._defer = nil // should be true already but just in case.
 	gp._panic = nil // non-nil for Goexit during panic. points at stack-allocated data.
@@ -4436,7 +4485,8 @@ func checkdead() {
 		}
 		s := readgstatus(gp)
 		switch s &^ _Gscan {
-		case _Gwaiting:
+		case _Gwaiting,
+			_Gpreempted:
 			grunning++
 		case _Grunnable,
 			_Grunning,

src/runtime/runtime2.go

@@ -78,6 +78,13 @@ const (
 	// stack is owned by the goroutine that put it in _Gcopystack.
 	_Gcopystack // 8
 
+	// _Gpreempted means this goroutine stopped itself for a
+	// suspendG preemption. It is like _Gwaiting, but nothing is
+	// yet responsible for ready()ing it. Some suspendG must CAS
+	// the status to _Gwaiting to take responsibility for
+	// ready()ing this G.
+	_Gpreempted // 9
+
 	// _Gscan combined with one of the above states other than
 	// _Grunning indicates that GC is scanning the stack. The
 	// goroutine is not executing user code and the stack is owned
@@ -89,11 +96,12 @@ const (
 	//
 	// atomicstatus&~Gscan gives the state the goroutine will
 	// return to when the scan completes.
-	_Gscan         = 0x1000
+	_Gscan          = 0x1000
-	_Gscanrunnable = _Gscan + _Grunnable // 0x1001
+	_Gscanrunnable  = _Gscan + _Grunnable  // 0x1001
-	_Gscanrunning  = _Gscan + _Grunning  // 0x1002
+	_Gscanrunning   = _Gscan + _Grunning   // 0x1002
-	_Gscansyscall  = _Gscan + _Gsyscall  // 0x1003
+	_Gscansyscall   = _Gscan + _Gsyscall   // 0x1003
-	_Gscanwaiting  = _Gscan + _Gwaiting  // 0x1004
+	_Gscanwaiting   = _Gscan + _Gwaiting   // 0x1004
+	_Gscanpreempted = _Gscan + _Gpreempted // 0x1009
 )
 
 const (
@@ -411,6 +419,7 @@ type g struct {
 	waitsince      int64      // approx time when the g become blocked
 	waitreason     waitReason // if status==Gwaiting
 	preempt        bool       // preemption signal, duplicates stackguard0 = stackpreempt
+	preemptStop    bool       // transition to _Gpreempted on preemption; otherwise, just deschedule
 	paniconfault   bool       // panic (instead of crash) on unexpected fault address
 	preemptscan    bool       // preempted g does scan for gc
 	gcscandone     bool       // g has scanned stack; protected by _Gscan bit in status
@@ -906,6 +915,7 @@ const (
 	waitReasonTraceReaderBlocked                      // "trace reader (blocked)"
 	waitReasonWaitForGCCycle                          // "wait for GC cycle"
 	waitReasonGCWorkerIdle                            // "GC worker (idle)"
+	waitReasonPreempted                               // "preempted"
 )
 
 var waitReasonStrings = [...]string{
@@ -934,6 +944,7 @@ var waitReasonStrings = [...]string{
 	waitReasonTraceReaderBlocked:    "trace reader (blocked)",
 	waitReasonWaitForGCCycle:        "wait for GC cycle",
 	waitReasonGCWorkerIdle:          "GC worker (idle)",
+	waitReasonPreempted:             "preempted",
 }
 
 func (w waitReason) String() string {

src/runtime/stack.go

@@ -1017,6 +1017,11 @@ func newstack() {
 		if thisg.m.p == 0 && thisg.m.locks == 0 {
 			throw("runtime: g is running but p is not")
 		}
+
+		if gp.preemptStop {
+			preemptPark(gp) // never returns
+		}
+
 		// Synchronize with scang.
 		casgstatus(gp, _Grunning, _Gwaiting)
 		if gp.preemptscan {

src/runtime/traceback.go

@@ -860,6 +860,7 @@ var gStatusStrings = [...]string{
 	_Gwaiting:   "waiting",
 	_Gdead:      "dead",
 	_Gcopystack: "copystack",
+	_Gpreempted: "preempted",
 }
 
 func goroutineheader(gp *g) {