This change does a bulk rename of several identifiers in the compiler.
See #27167 and https://docs.google.com/document/d/19_ExiylD9MRfeAjKIfEsMU1_RGhuxB9sA0b5Zv7byVI/
for context and for discussion of these particular renames.
Commands run to generate this change:
gorename -from '"cmd/compile/internal/gc".OPROC' -to OGO
gorename -from '"cmd/compile/internal/gc".OCOM' -to OBITNOT
gorename -from '"cmd/compile/internal/gc".OMINUS' -to ONEG
gorename -from '"cmd/compile/internal/gc".OIND' -to ODEREF
gorename -from '"cmd/compile/internal/gc".OARRAYBYTESTR' -to OBYTES2STR
gorename -from '"cmd/compile/internal/gc".OARRAYBYTESTRTMP' -to OBYTES2STRTMP
gorename -from '"cmd/compile/internal/gc".OARRAYRUNESTR' -to ORUNES2STR
gorename -from '"cmd/compile/internal/gc".OSTRARRAYBYTE' -to OSTR2BYTES
gorename -from '"cmd/compile/internal/gc".OSTRARRAYBYTETMP' -to OSTR2BYTESTMP
gorename -from '"cmd/compile/internal/gc".OSTRARRAYRUNE' -to OSTR2RUNES
gorename -from '"cmd/compile/internal/gc".Etop' -to ctxStmt
gorename -from '"cmd/compile/internal/gc".Erv' -to ctxExpr
gorename -from '"cmd/compile/internal/gc".Ecall' -to ctxCallee
gorename -from '"cmd/compile/internal/gc".Efnstruct' -to ctxMultiOK
gorename -from '"cmd/compile/internal/gc".Easgn' -to ctxAssign
gorename -from '"cmd/compile/internal/gc".Ecomplit' -to ctxCompLit
Not altered: parameters and local variables (mostly in typecheck.go) named top,
which should probably now be called ctx (and which should probably have a named type).
Also not altered: Field called Top in gc.Func.
gorename -from '"cmd/compile/internal/gc".Node.Isddd' -to IsDDD
gorename -from '"cmd/compile/internal/gc".Node.SetIsddd' -to SetIsDDD
gorename -from '"cmd/compile/internal/gc".nodeIsddd' -to nodeIsDDD
gorename -from '"cmd/compile/internal/types".Field.Isddd' -to IsDDD
gorename -from '"cmd/compile/internal/types".Field.SetIsddd' -to SetIsDDD
gorename -from '"cmd/compile/internal/types".fieldIsddd' -to fieldIsDDD
Not altered: function gc.hasddd, params and local variables called isddd
Also not altered: fmt.go prints nodes using "isddd(%v)".
cd cmd/compile/internal/gc; go generate
I then manually found impacted comments using exact string match
and fixed them up by hand. The comment changes were trivial.
Passes toolstash-check.
Fixes#27167. If this experiment is deemed a success,
we will open a new tracking issue for renames to do
at the end of the 1.13 cycles.
Change-Id: I2dc541533d2ab0d06cb3d31d65df205ecfb151e8
Reviewed-on: https://go-review.googlesource.com/c/150140
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This implements compiler and linker support for separating the
function calling ABI into two ABIs: a stable and an internal ABI. At
the moment, the two ABIs are identical, but we'll be able to evolve
the internal ABI without breaking existing assembly code that depends
on the stable ABI for calling to and from Go.
The Go compiler generates internal ABI symbols for all Go functions.
It uses the symabis information produced by the assembler to create
ABI wrappers whenever it encounters a body-less Go function that's
defined in assembly or a Go function that's referenced from assembly.
Since the two ABIs are currently identical, for the moment this is
implemented using "ABI alias" symbols, which are just forwarding
references to the native ABI symbol for a function. This way there's
no actual code involved in the ABI wrapper, which is good because
we're not deriving any benefit from it right now. Once the ABIs
diverge, we can eliminate ABI aliases.
The linker represents these different ABIs internally as different
versions of the same symbol. This way, the linker keeps us honest,
since every symbol definition and reference also specifies its
version. The linker is responsible for resolving ABI aliases.
Fixes#27539.
Change-Id: I197c52ec9f8fc435db8f7a4259029b20f6d65e95
Reviewed-on: https://go-review.googlesource.com/c/147160
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Was only ever filled with one Etype (TFORW) and only used
in one place. Easier to just check for TFORW.
Change-Id: Icc96da3a22b0af1d7e60bc5841c744916c53341e
Reviewed-on: https://go-review.googlesource.com/c/147285
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Ranging through a map is non-deterministic and there can be duplicate
entries in the set (with the same name) which don't have identical
definitions in some cases.
Fixes#27013
Change-Id: I378c48bc359c10b25b9238e0c663b498455b19fd
Reviewed-on: https://go-review.googlesource.com/129515
Reviewed-by: Russ Cox <rsc@golang.org>
When DWARF is disabled, some alg functions were not generated.
Make sure they are generated when we about to generate calls to
them.
Fixes#23546.
Change-Id: Iecfa0eea830e42ee92e55268167cefb1540980b2
Reviewed-on: https://go-review.googlesource.com/122403
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The hmap field in the maptype is only used by the runtime to check the sizes of
the hmap structure created by the compiler and runtime agree.
Comments are already present about the hmap structure definitions in the
compiler and runtime needing to be in sync.
Add a test that checks the runtimes hmap size is as expected to detect
when the compilers and runtimes hmap sizes diverge instead of checking
this at runtime when a map is created.
Change-Id: I974945ebfdb66883a896386a17bbcae62a18cf2a
Reviewed-on: https://go-review.googlesource.com/91796
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Some of the comments relative paths do not exist and
reflect does not define its own hmap structure.
Correct paths and consistently reference paths starting from the
go src directory.
Change-Id: I5204a3a98f77d65f17dcde98b847378cea05ad8a
Reviewed-on: https://go-review.googlesource.com/94758
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This reduces the API surface of Type slightly (for #25056), but also
makes it more consistent with the reflect and go/types APIs.
Passes toolstash-check.
Change-Id: Ief9a8eb461ae6e88895f347e2a1b7b8a62423222
Reviewed-on: https://go-review.googlesource.com/109138
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
For struct fields and methods, Field.Nname was only used to store
position information, which means we're allocating an entire ONAME
Node+Name+Param structure just for one field. We can optimize away
these ONAME allocations by instead adding a Field.Pos field.
Unfortunately, we can't get rid of Field.Nname, because it's needed
for function parameters, so Field grows a little bit and now has more
redundant information in those cases. However, that was already the
case (e.g., Field.Sym and Field.Nname.Sym), and it's still a net win
for allocations as demonstrated by the benchmarks below.
Additionally, by moving the ONAME allocation for function parameters
to funcargs, we can avoid allocating them for function parameters that
aren't used in corresponding function bodies (e.g., interface methods,
function-typed variables, and imported functions/methods without
inline bodies).
name old time/op new time/op delta
Template 254ms ± 6% 251ms ± 6% -1.04% (p=0.000 n=487+488)
Unicode 128ms ± 7% 128ms ± 7% ~ (p=0.294 n=482+467)
GoTypes 862ms ± 5% 860ms ± 4% ~ (p=0.075 n=488+471)
Compiler 3.91s ± 4% 3.90s ± 4% -0.39% (p=0.000 n=468+473)
name old user-time/op new user-time/op delta
Template 339ms ±14% 336ms ±14% -1.02% (p=0.001 n=498+494)
Unicode 176ms ±18% 176ms ±25% ~ (p=0.940 n=491+499)
GoTypes 1.13s ± 8% 1.13s ± 9% ~ (p=0.157 n=496+493)
Compiler 5.24s ± 6% 5.21s ± 6% -0.57% (p=0.000 n=485+489)
name old alloc/op new alloc/op delta
Template 38.3MB ± 0% 37.3MB ± 0% -2.58% (p=0.000 n=499+497)
Unicode 29.1MB ± 0% 29.1MB ± 0% -0.03% (p=0.000 n=500+493)
GoTypes 116MB ± 0% 115MB ± 0% -0.65% (p=0.000 n=498+499)
Compiler 492MB ± 0% 487MB ± 0% -1.00% (p=0.000 n=497+498)
name old allocs/op new allocs/op delta
Template 364k ± 0% 360k ± 0% -1.15% (p=0.000 n=499+499)
Unicode 336k ± 0% 336k ± 0% -0.01% (p=0.000 n=500+493)
GoTypes 1.16M ± 0% 1.16M ± 0% -0.30% (p=0.000 n=499+499)
Compiler 4.54M ± 0% 4.51M ± 0% -0.58% (p=0.000 n=494+495)
Passes toolstash-check -gcflags=-dwarf=false. Changes DWARF output
because position information is now tracked more precisely for
function parameters.
Change-Id: Ib8077d70d564cc448c5e4290baceab3a4396d712
Reviewed-on: https://go-review.googlesource.com/108217
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Also, when statically building itabs, compare *types.Sym instead of
name alone so that method sets with duplicate non-exported methods are
handled correctly.
Fixes#24693.
Change-Id: I2db8a3d6e80991a71fef5586a15134b6de116269
Reviewed-on: https://go-review.googlesource.com/105039
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This used to be duplicated in methcmp and siglt, because Sig used its
own representation for Syms. Instead, just use Syms, and add a
(*Sym).Less method that both methcmp and siglt can use.
Also, prune some impossible cases purportedly related to blank
methods: the Go spec disallows blank methods in interface method sets,
and addmethod drops blank methods without actually recording them in
the type's method set.
Passes toolstash-check.
Updates #24693.
Change-Id: I24e981659b68504d71518160486989a82505f513
Reviewed-on: https://go-review.googlesource.com/105936
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Method expressions with anonymous receiver types like "struct { T }.m"
require wrapper functions, which we weren't always creating. This in
turn resulted in linker errors.
This CL ensures that we generate wrapper functions for any anonymous
receiver types used in a method expression.
Fixes#22444.
Change-Id: Ia8ac27f238c2898965e57b82a91d959792d2ddd4
Reviewed-on: https://go-review.googlesource.com/105044
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
There were multiple ad hoc ways to create method symbols, with subtle
and confusing differences between them. This CL unifies them into a
single well-documented encoding and implementation.
This introduces some inconsequential changes to symbol format for the
sake of simplicity and consistency. Two notable changes:
1) Symbol construction is now insensitive to the package currently
being compiled. Previously, non-exported methods on anonymous types
received different method symbols depending on whether the method was
local or imported.
2) Symbols for method values parenthesized non-pointer receiver types
and non-exported method names, and also always package-qualified
non-exported method names. Now they use the same rules as normal
method symbols.
The methodSym function is also now stricter about rejecting
non-sensical method/receiver combinations. Notably, this means that
typecheckfunc needs to call addmethod to validate the method before
calling declare, which also means we no longer emit errors about
redeclaring bogus methods.
Change-Id: I9501c7a53dd70ef60e5c74603974e5ecc06e2003
Reviewed-on: https://go-review.googlesource.com/104876
Reviewed-by: Robert Griesemer <gri@golang.org>
Originally, scalar values were directly stored within interface values
as long as they fit into a pointer-sized slot of memory. And since
interface method calls always pass the full pointer-sized value as the
receiver argument, value-narrowing wrappers were necessary to adapt to
the calling convention for methods with smaller receiver types.
However, for precise garbage collection, we now only store actual
pointers within interface values, so these wrappers are no longer
necessary.
Passes toolstash-check.
Change-Id: I5303bfeb8d0f11db619b5a5d06b37ac898588670
Reviewed-on: https://go-review.googlesource.com/104875
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Remove a couple of unnecessary var declarations, an unused sort.Sort
type, and simplify a range by using the two-name variant.
Change-Id: Ia251f634db0bfbe8b1d553b8659272ddbd13b2c3
Reviewed-on: https://go-review.googlesource.com/102336
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
By moving exported methods to the front of method lists, filtering
down to only the exported methods just needs a count of how many
exported methods exist, which the compiler can statically
provide. This allows getting rid of the exported method cache.
For #22075.
Change-Id: I8eeb274563a2940e1347c34d673f843ae2569064
Reviewed-on: https://go-review.googlesource.com/100846
Reviewed-by: Ian Lance Taylor <iant@golang.org>
By sorting method sets earlier, we can change the interface
satisfaction problem from taking O(NM) time to O(N+M). This is the
same algorithm already used by runtime and reflect for dynamic
interface satisfaction testing.
For #22075.
Change-Id: I3d889f0227f37704535739bbde11f5107b4eea17
Reviewed-on: https://go-review.googlesource.com/100845
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
As reported by unparam.
Passes toolstash -cmp on std cmd.
Change-Id: I55473e1eed096ed1c3e431aed2cbf0b6b5444b91
Reviewed-on: https://go-review.googlesource.com/97895
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The first word of an interface is a pointer, but for the purposes
of GC we don't need to treat it as such.
1. If it is a non-empty interface, the pointer points to an itab
which is always in persistentalloc space.
2. If it is an empty interface, the pointer points to a _type.
a. If it is a compile-time-allocated type, it points into
the read-only data section.
b. If it is a reflect-allocated type, it points into the Go heap.
Reflect is responsible for keeping a reference to
the underlying type so it won't be GCd.
If we ever have a moving GC, we need to change this for 2b (as
well as scan itabs to update their itab._type fields).
Write barriers on the first word of interfaces have already been removed.
Change-Id: I643e91d7ac4de980ac2717436eff94097c65d959
Reviewed-on: https://go-review.googlesource.com/97518
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Rename all map implementation and test files to use "map"
as a file name prefix instead of "hashmap" for the implementation
and "map" for the test file names.
Change-Id: I7b317c1f7a660b95c6d1f1a185866f2839e69446
Reviewed-on: https://go-review.googlesource.com/90336
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
They could get picked up by reflect code, yielding the wrong type.
Fixes#22605
Change-Id: Ie11fb361ca7f3255e662037b3407565c8f0a2c4c
Reviewed-on: https://go-review.googlesource.com/76315
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Handle make(map[any]any) and make(map[any]any, hint) where
hint <= BUCKETSIZE special to allow for faster map initialization
and to improve binary size by using runtime calls with fewer arguments.
Given hint is smaller or equal to BUCKETSIZE in which case
overLoadFactor(hint, 0) is false and no buckets would be allocated by makemap:
* If hmap needs to be allocated on the stack then only hmap's hash0
field needs to be initialized and no call to makemap is needed.
* If hmap needs to be allocated on the heap then a new special
makehmap function will allocate hmap and intialize hmap's
hash0 field.
Reduces size of the godoc by ~36kb.
AMD64
name old time/op new time/op delta
NewEmptyMap 16.6ns ± 2% 5.5ns ± 2% -66.72% (p=0.000 n=10+10)
NewSmallMap 64.8ns ± 1% 56.5ns ± 1% -12.75% (p=0.000 n=9+10)
Updates #6853
Change-Id: I624e90da6775afaa061178e95db8aca674f44e9b
Reviewed-on: https://go-review.googlesource.com/61190
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reduce the scope of some. Also remove vars that were simply the index or
the value in a range statement. While at it, remove a var that was
exactly the length of a slice.
Also replaced 'bad' with a more clear 'errored' of type bool, and
renamed a single-char name with a comment to a name that is
self-explanatory.
And removed a few unnecessary Index calls within loops.
Passes toolstash -cmp on std cmd.
Change-Id: I26eee5f04e8f7e5418e43e25dca34f89cca5c80a
Reviewed-on: https://go-review.googlesource.com/70930
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
ORETJMP doesn't need an ONAME if we just set the target method on Sym
instead of Left. Conveniently, this is where fmt.go was looking for it
anyway.
Change the iface parameter and global compiling_wrappers to bool.
Passes toolstash-check.
Change-Id: I5333f8bcb4e06bf8161808041125eb95c439aafe
Reviewed-on: https://go-review.googlesource.com/68252
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Robert Griesemer <gri@golang.org>
All of the callers want a *obj.LSym instead of a *types.Sym, and the
runtime type descriptors don't need Go source symbols anyway.
Passes toolstash-check.
Change-Id: I8ae4b64380fbb547857f49b42465118f41884eed
Reviewed-on: https://go-review.googlesource.com/68251
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Marvin Stenger <marvin.stenger94@gmail.com>
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Rework the logic to remove them. These were the low hanging fruit,
with labels that were used only once and logic that was fairly
straightforward.
Change-Id: I02a01c59c247b8b2972d8d73ff23f96f271de038
Reviewed-on: https://go-review.googlesource.com/63410
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The existing logic tried to advance the offset for each variable's
width, but then tried to undo this logic with the array and struct
handling code. It can all be much simpler by only worrying about
computing offsets within the array and struct code.
While here, include a short-circuit for zero-width arrays to fix a
pedantic compiler failure case.
Passes toolstash-check.
Fixes#20739.
Change-Id: I98af9bb512a33e3efe82b8bf1803199edb480640
Reviewed-on: https://go-review.googlesource.com/64471
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
This makes it easier to deduce from the field names which overflow
field corresponds to h.buckets and which to h.oldbuckets by aligning
the naming with the buckets fields in hmap.
Change-Id: I8d6a729229a190db0212bac012ead1a3c13cf5d0
Reviewed-on: https://go-review.googlesource.com/62411
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Remove the runtime ismapkey check from makemap and
add a check that the map key type supports comparison
to the hmap construction in the compiler.
Move the ismapkey check for the reflect code path
into reflect_makemap.
Change-Id: I718f79b0670c05b63ef31721e72408f59ec4ae86
Reviewed-on: https://go-review.googlesource.com/61035
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This makes the name of the function to construct the map bucket type
consistent with runtimes naming and the existing hmap function.
Change-Id: If4d8b4a54c92ab914d4adcb96022b48d8b5db631
Reviewed-on: https://go-review.googlesource.com/59915
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Padding needed for map buckets is dependent on the types used to
construct the map bucket. In case of indirect keys or values pointers
are used in the map bucket to the keys or values.
Change the map bucket padding calculation to take the alignment of
the key and value types used to construct the map bucket into account
instead of the original key and value type.
Since pointers are always 32bit aligned on amd64p32 this prevents
adding unneeded padding in case the key or value would have needed
64bit alignment without indirect referencing.
Change-Id: I7943448e882d269b5cff7e921a2a6f3430c50878
Reviewed-on: https://go-review.googlesource.com/60030
Reviewed-by: Keith Randall <khr@golang.org>
Check map invariants, type size and alignments during compile time.
Keep runtime checks for reflect by adding them to reflect_makemap.
Change-Id: Ia28610626591bf7fafb7d5a1ca318da272e54879
Reviewed-on: https://go-review.googlesource.com/59914
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Prioritized the chunks of code with 8 or more levels of indentation.
Basically early breaks/returns and joining nested ifs.
Change-Id: I6817df1303226acf2eb904a29f2db720e4f7427a
Reviewed-on: https://go-review.googlesource.com/55630
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
I noticed that we don't set an itab's function pointers at compile
time. Instead, we currently do it at executable startup.
Set the function pointers at compile time instead. This shortens
startup time. It has no effect on normal binary size. Object files
will have more relocations, but that isn't a big deal.
For PIE there are additional pointers that will need to be adjusted at
load time. There are already other pointers in an itab that need to be
adjusted, so the cache line will already be paged in. There might be
some binary size overhead to mark these pointers. The "go test -c
-buildmode=pie net/http" binary is 0.18% bigger.
Update #20505
Change-Id: I267c82489915b509ff66e512fc7319b2dd79b8f7
Reviewed-on: https://go-review.googlesource.com/44341
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
We don't use it any more, remove it.
Change-Id: I76ce1a4c2e7048fdd13a37d3718b5abf39ed9d26
Reviewed-on: https://go-review.googlesource.com/44474
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Just use fun[0]==0 to indicate a bad itab.
Change-Id: I28ecb2d2d857090c1ecc40b1d1866ac24a844848
Reviewed-on: https://go-review.googlesource.com/44473
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
