For address of an auto or arg, on all non-x86 architectures
the assembler backend encodes the actual SP offset in the
instruction but leaves the offset in Prog unchanged. When the
assembly is printed in compile -S, it shows an offset
relative to pseudo FP/SP with an actual hardware SP base
register (e.g. R13 on ARM). This is confusing. Unset the
base register if it is indeed SP, so the assembly output is
consistent. If the base register isn't SP, it should be an
error and the error output contains the actual base register.
For address loading instructions, the base register isn't set
in the compiler on non-x86 architectures. Set it. Normally it
is SP and will be unset in the change mentioned above for
printing. If it is not, it will be an error and the error
output contains the actual base register.
No change in generated binary, only printed assembly. Passes
"go build -a -toolexec 'toolstash -cmp' std cmd" on all
architectures.
Fixes#21064.
Change-Id: Ifafe8d5f9b437efbe824b63b3cbc2f5f6cdc1fd5
Reviewed-on: https://go-review.googlesource.com/49432
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When package ssa was created, Type was in package gc.
To avoid circular dependencies, we used an interface (ssa.Type)
to represent type information in SSA.
In the Go 1.9 cycle, gri extricated the Type type from package gc.
As a result, we can now use it in package ssa.
Now, instead of package types depending on package ssa,
it is the other way.
This is a more sensible dependency tree,
and helps compiler performance a bit.
Though this is a big CL, most of the changes are
mechanical and uninteresting.
Interesting bits:
* Add new singleton globals to package types for the special
SSA types Memory, Void, Invalid, Flags, and Int128.
* Add two new Types, TSSA for the special types,
and TTUPLE, for SSA tuple types.
ssa.MakeTuple is now types.NewTuple.
* Move type comparison result constants CMPlt, CMPeq, and CMPgt
to package types.
* We had picked the name "types" in our rules for the handy
list of types provided by ssa.Config. That conflicted with
the types package name, so change it to "typ".
* Update the type comparison routine to handle tuples and special
types inline.
* Teach gc/fmt.go how to print special types.
* We can now eliminate ElemTypes in favor of just Elem,
and probably also some other duplicated Type methods
designed to return ssa.Type instead of *types.Type.
* The ssa tests were using their own dummy types,
and they were not particularly careful about types in general.
Of necessity, this CL switches them to use *types.Type;
it does not make them more type-accurate.
Unfortunately, using types.Type means initializing a bit
of the types universe.
This is prime for refactoring and improvement.
This shrinks ssa.Value; it now fits in a smaller size class
on 64 bit systems. This doesn't have a giant impact,
though, since most Values are preallocated in a chunk.
name old alloc/op new alloc/op delta
Template 37.9MB ± 0% 37.7MB ± 0% -0.57% (p=0.000 n=10+8)
Unicode 28.9MB ± 0% 28.7MB ± 0% -0.52% (p=0.000 n=10+10)
GoTypes 110MB ± 0% 109MB ± 0% -0.88% (p=0.000 n=10+10)
Flate 24.7MB ± 0% 24.6MB ± 0% -0.66% (p=0.000 n=10+10)
GoParser 31.1MB ± 0% 30.9MB ± 0% -0.61% (p=0.000 n=10+9)
Reflect 73.9MB ± 0% 73.4MB ± 0% -0.62% (p=0.000 n=10+8)
Tar 25.8MB ± 0% 25.6MB ± 0% -0.77% (p=0.000 n=9+10)
XML 41.2MB ± 0% 40.9MB ± 0% -0.80% (p=0.000 n=10+10)
[Geo mean] 40.5MB 40.3MB -0.68%
name old allocs/op new allocs/op delta
Template 385k ± 0% 386k ± 0% ~ (p=0.356 n=10+9)
Unicode 343k ± 1% 344k ± 0% ~ (p=0.481 n=10+10)
GoTypes 1.16M ± 0% 1.16M ± 0% -0.16% (p=0.004 n=10+10)
Flate 238k ± 1% 238k ± 1% ~ (p=0.853 n=10+10)
GoParser 320k ± 0% 320k ± 0% ~ (p=0.720 n=10+9)
Reflect 957k ± 0% 957k ± 0% ~ (p=0.460 n=10+8)
Tar 252k ± 0% 252k ± 0% ~ (p=0.133 n=9+10)
XML 400k ± 0% 400k ± 0% ~ (p=0.796 n=10+10)
[Geo mean] 428k 428k -0.01%
Removing all the interface calls helps non-trivially with CPU, though.
name old time/op new time/op delta
Template 178ms ± 4% 173ms ± 3% -2.90% (p=0.000 n=94+96)
Unicode 85.0ms ± 4% 83.9ms ± 4% -1.23% (p=0.000 n=96+96)
GoTypes 543ms ± 3% 528ms ± 3% -2.73% (p=0.000 n=98+96)
Flate 116ms ± 3% 113ms ± 4% -2.34% (p=0.000 n=96+99)
GoParser 144ms ± 3% 140ms ± 4% -2.80% (p=0.000 n=99+97)
Reflect 344ms ± 3% 334ms ± 4% -3.02% (p=0.000 n=100+99)
Tar 106ms ± 5% 103ms ± 4% -3.30% (p=0.000 n=98+94)
XML 198ms ± 5% 192ms ± 4% -2.88% (p=0.000 n=92+95)
[Geo mean] 178ms 173ms -2.65%
name old user-time/op new user-time/op delta
Template 229ms ± 5% 224ms ± 5% -2.36% (p=0.000 n=95+99)
Unicode 107ms ± 6% 106ms ± 5% -1.13% (p=0.001 n=93+95)
GoTypes 696ms ± 4% 679ms ± 4% -2.45% (p=0.000 n=97+99)
Flate 137ms ± 4% 134ms ± 5% -2.66% (p=0.000 n=99+96)
GoParser 176ms ± 5% 172ms ± 8% -2.27% (p=0.000 n=98+100)
Reflect 430ms ± 6% 411ms ± 5% -4.46% (p=0.000 n=100+92)
Tar 128ms ±13% 123ms ±13% -4.21% (p=0.000 n=100+100)
XML 239ms ± 6% 233ms ± 6% -2.50% (p=0.000 n=95+97)
[Geo mean] 220ms 213ms -2.76%
Change-Id: I15c7d6268347f8358e75066dfdbd77db24e8d0c1
Reviewed-on: https://go-review.googlesource.com/42145
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Type.Size and Type.Alignment are for the front end:
They calculate size and alignment if needed.
Type.MustSize and Type.MustAlignment are for the back end:
They call Fatal if size and alignment are not already calculated.
Most uses are of MustSize and MustAlignment,
but that's because the back end is newer,
and this API was added to support it.
This CL was mostly generated with sed and selective reversion.
The only mildly interesting bit is the change of the ssa.Type interface
and the supporting ssa dummy types.
Follow-up to review feedback on CL 41970.
Passes toolstash-check.
Change-Id: I0d9b9505e57453dae8fb6a236a07a7a02abd459e
Reviewed-on: https://go-review.googlesource.com/42016
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
ARM's udiv function is nosplit and it shouldn't be preemptied
(passing args in registers). It is in some sense like DUFFCOPY,
which we don't mark as safepoint.
Change-Id: I49f7c4e69e787ac364d0b0def0661e79a0ea9e69
Reviewed-on: https://go-review.googlesource.com/41370
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The experiment "clobberdead" clobbers all pointer fields that the
compiler thinks are dead, just before and after every safepoint.
Useful for debugging the generation of live pointer bitmaps.
Helped find the following issues:
Update #15936
Update #16026
Update #16095
Update #18860
Change-Id: Id1d12f86845e3d93bae903d968b1eac61fc461f9
Reviewed-on: https://go-review.googlesource.com/23924
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Instead of populating the aux symbol
of CALLudiv during rewrite rules,
populate it during genssa.
This simplifies the rewrite rules.
It also removes all remaining calls
to ctxt.Lookup from any rewrite rules.
This is a first step towards removing
ctxt from ssa.Cache entirely,
and also a first step towards converting
the obj.LSym.Version field into a boolean.
It should also speed up compilation.
Also, move func udiv into package runtime.
That's where it is anyway,
and it lets udiv look and act like the rest of
the runtime support functions.
Change-Id: I41462a632c14fdc41f61b08049ec13cd80a87bfe
Reviewed-on: https://go-review.googlesource.com/41191
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
By checking GOARM in ssa/gen/ARM.rules, each intermediate operator
can be implemented via different instruction serials.
It is up to the user to choose between compitability and efficiency.
The Bswap32(x) is optimized to REV(x) when GOARM >= 6.
The CTZ(x) is optimized to CLZ(RBIT x) when GOARM == 7.
Change-Id: Ie9ee645fa39333fa79ad84ed4d1cefac30422814
Reviewed-on: https://go-review.googlesource.com/35610
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This CL changes the GOARCH.Init functions to take gc.Thearch as a
parameter, which gc.Main supplies.
Additionally, the x86 backend is refactored to decide within Init
whether to use the 387 or SSE2 instruction generators, rather than for
each individual SSA Value/Block.
Passes toolstash-check -all.
Change-Id: Ie6305a6cd6f6ab4e89ecbb3cbbaf5ffd57057a24
Reviewed-on: https://go-review.googlesource.com/38301
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This abstracts creation of ACALL Progs into package gc. The main
benefit of this today is we can refactor away a lot of common
boilerplate code.
Later, once liveness analysis happens on the SSA graph, this will also
provide an easy insertion point for emitting the PCDATA Progs
immediately before call instructions.
Passes toolstash-check -all.
Change-Id: Ia15108ace97201cd84314f1ca916dfeb4f09d61c
Reviewed-on: https://go-review.googlesource.com/38081
Reviewed-by: Keith Randall <khr@golang.org>
Several SSA ops will always behave identically regardless of target
architecture, so handle those within gc/ssa.go instead.
Passes toolstash-check -all.
Change-Id: I54d514e80ab86723e44332a5a38e3054cbca8c5d
Reviewed-on: https://go-review.googlesource.com/37931
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Removes all external uses of Linksym and Pkglookup, which are the only
two exported functions that return Syms.
Also add Duffcopy and Duffzero since they're used often enough across
SSA backends.
Passes toolstash -cmp.
Change-Id: I8d3fd048ad5cd676fc46378f09a917569ffc9b2c
Reviewed-on: https://go-review.googlesource.com/36418
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Gc's Sym type represents a package-qualified identifier, which is a
frontend concept and doesn't belong in SSA. Bonus: we can replace some
interface{} types with *obj.LSym.
Passes toolstash -cmp.
Change-Id: I456eb9957207d80f99f6eb9b8eab4a1f3263e9ed
Reviewed-on: https://go-review.googlesource.com/36415
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This is a mostly mechanical rename followed by manual fixes where necessary.
Change-Id: Ie5c670b133db978f15dc03e50dc2da0c80fc8842
Reviewed-on: https://go-review.googlesource.com/34137
Reviewed-by: David Lazar <lazard@golang.org>
Various minor adjustments.
Change-Id: Iedfb97989f7bedaa3e9e8993b167e05f162434a7
Reviewed-on: https://go-review.googlesource.com/34136
Reviewed-by: David Lazar <lazard@golang.org>
Adjust cmd/compile accordingly.
This will make it easier to replace the underlying implementation.
Change-Id: I33645850bb18c839b24785b6222a9e028617addb
Reviewed-on: https://go-review.googlesource.com/34133
Reviewed-by: David Lazar <lazard@golang.org>
Identify live stack variables during SSA and compute the stack frame
layout earlier so that we can emit instructions with the correct
offsets upfront.
Passes toolstash/buildall.
Change-Id: I191100dba274f1e364a15bdcfdc1d1466cdd1db5
Reviewed-on: https://go-review.googlesource.com/30216
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
On ARM, DIV, DIVU, MOD, MODU are pseudo instructions that makes
runtime calls _div/_udiv/_mod/_umod, which themselves are wrappers
of udiv. The udiv function does the real thing.
Instead of generating these pseudo instructions, call to udiv
directly. This removes one layer of wrappers (which has an awkward
way of passing argument), and also allows combining DIV and MOD
if both results are needed.
Change-Id: I118afc3986db3a1daabb5c1e6e57430888c91817
Reviewed-on: https://go-review.googlesource.com/29390
Reviewed-by: David Chase <drchase@google.com>
Teach SSA about the cmd/internal/obj/$ARCH register numbering.
It can then return that numbering when requested. Each architecture
now does not need to know anything about the internal SSA numbering
of registers.
Change-Id: I34472a2736227c15482e60994eebcdd2723fa52d
Reviewed-on: https://go-review.googlesource.com/29249
Reviewed-by: David Chase <drchase@google.com>
Get rid of BlockCheck. Josh goaded me into it, and I went
down a rabbithole making it happen.
NilCheck now panics if the pointer is nil and returns void, as before.
BlockCheck is gone, and NilCheck is no longer a Control value for
any block. It just exists (and deadcode knows not to throw it away).
I rewrote the nilcheckelim pass to handle this case. In particular,
there can now be multiple NilCheck ops per block.
I moved all of the arch-dependent nil check elimination done as
part of ssaGenValue into its own proper pass, so we don't have to
duplicate that code for every architecture.
Making the arch-dependent nil check its own pass means I needed
to add a bunch of flags to the opcode table so I could write
the code without arch-dependent ops everywhere.
Change-Id: I419f891ac9b0de313033ff09115c374163416a9f
Reviewed-on: https://go-review.googlesource.com/29120
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Rip out the code that allows SSA to be used conditionally.
No longer exists:
ssa=0 flag
GOSSAHASH
GOSSAPKG
SSATEST
GOSSAFUNC now only controls the printing of the IR/html.
Still need to rip out all of the old backend. It should no longer be
callable after this CL.
Update #16357
Change-Id: Ib30cc18fba6ca52232c41689ba610b0a94aa74f5
Reviewed-on: https://go-review.googlesource.com/29155
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
No need for it, we can treat calls as (mostly) normal values
that take a memory and return a memory.
Lowers the number of basic blocks needed to represent a function.
"go test -c net/http" uses 27% fewer basic blocks.
Probably doesn't affect generated code much, but should help
various passes whose running time and/or space depends on
the number of basic blocks.
Fixes#15631
Change-Id: I0bf21e123f835e2cfa382753955a4f8bce03dfa6
Reviewed-on: https://go-review.googlesource.com/28950
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Atomic ops on ARM are implemented with kernel calls, so they are
not intrinsified.
Change-Id: I0e7cc2e5526ae1a3d24b4b89be1bd13db071f8ef
Reviewed-on: https://go-review.googlesource.com/28977
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Reduce the duplication in every arch by moving the code into package gc.
Change-Id: Ia111add8316492571825431ecd4f0154c8792ae1
Reviewed-on: https://go-review.googlesource.com/28481
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Inline atomic reads and writes on amd64. There's no reason
to pay the overhead of a call for these.
To keep atomic loads from being reordered, we make them
return a <value,memory> tuple.
Change the meaning of resultInArg0 for tuple-generating ops
to mean the first part of the result tuple, not the second.
This means we can always put the store part of the tuple last,
matching how arguments are laid out. This requires reordering
the outputs of add32carry and sub32carry and their descendents
in various architectures.
benchmark old ns/op new ns/op delta
BenchmarkAtomicLoad64-8 2.09 0.26 -87.56%
BenchmarkAtomicStore64-8 7.54 5.72 -24.14%
TBD (in a different CL): Cas, Or8, ...
Change-Id: I713ea88e7da3026c44ea5bdb56ed094b20bc5207
Reviewed-on: https://go-review.googlesource.com/27641
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Instead of comparing the address of the end of the memory to zero/copy,
comparing the address of the last element, which is a valid pointer.
Also unify large and unaligned Zero/Move, by passing alignment as AuxInt.
Fixes#16515 for ARM.
Change-Id: I19a62b31c5acf5c55c16a89bea1039c926dc91e5
Reviewed-on: https://go-review.googlesource.com/25300
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
For register-register move, if there is only one use, allocate it in
the same register so we don't need to emit an instruction.
Updates #15365.
Change-Id: Iad41843854a506c521d577ad93fcbe73e8de8065
Reviewed-on: https://go-review.googlesource.com/25059
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Make tuple types and their SelectX ops fully generic.
These ops no longer need to be lowered.
Regalloc understands them and their tuple-generating arguments.
We can now have opcodes returning arbitrary pairs of results.
(And it would be easy to move to >2 results if needed.)
Update arm implementation to the new standard.
Implement just enough in 386 port to do 64-bit add.
Change-Id: I370ed5aacce219c82e1954c61d1f63af76c16f79
Reviewed-on: https://go-review.googlesource.com/24976
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Add some simplification rules for floating point ops.
cmd/internal/obj/arm supports instructions that compare FP register
to 0, but runtime softfloat simulator does not. This CL adds these
instructions to softfloat simulator as well.
Updates #15365.
Change-Id: I29405b2bfcb4c8cf106cb7a1a811409fec91b170
Reviewed-on: https://go-review.googlesource.com/24790
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This CL implements the following optimizations for ARM:
- use shifted ops (e.g. ADD R1<<2, R2) and indexed load/stores
- break up shift ops. Shifts used to be one SSA op that generates
multiple instructions. We break them up to multiple ops, which
allows constant folding and CSE for comparisons. Conditional moves
are introduced for this.
- simplify zero/sign-extension ops.
Updates #15365.
Change-Id: I55e262a776a7ef2a1505d75e04d1208913c35d39
Reviewed-on: https://go-review.googlesource.com/24512
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Mostly constant folding rules, analogous to AMD64 ones. Along with
some simplifications.
Updates #15365.
Change-Id: If83bc1188bb05acb982ef3a1c21704c187e3eb24
Reviewed-on: https://go-review.googlesource.com/24210
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The comments were mostly duplicated; unify them.
Add a check that the required invariant holds.
Change-Id: I42fe09dcd1fac76d3c4e191f7a58c591c5ce429b
Reviewed-on: https://go-review.googlesource.com/24719
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: David Chase <drchase@google.com>
Encode the size and the alignment into AuxInt of Zero and Move ops.
On AMD64, we simply don't look at the alignment. On ARM and PPC64, we
only generate aligned stores.
Updates #15365.
Change-Id: Ifdcc205c364f67c4516b9adebfe7d50d223b6863
Reviewed-on: https://go-review.googlesource.com/24511
Reviewed-by: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Like AMD64, don't issue NilCheck instruction if the subsequent block
has a load or store at the same address.
Pass test/nilptr3_ssa.go.
Updates #15365.
Change-Id: Ic88780dab8c4893c57d1c95f663760cc185fe51e
Reviewed-on: https://go-review.googlesource.com/24451
Reviewed-by: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
Minor code cleanup. Done as part of understanding
OpARMMOVWaddr, since other architectures will
need to do something similar.
Change-Id: Iea2ecf3defb4f884e63902c369cd55e4647bce7a
Reviewed-on: https://go-review.googlesource.com/24157
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This will be used verbatim in other architectures.
Change-Id: I307891ae597d797fd45f296b6a38ffe9fac6b975
Reviewed-on: https://go-review.googlesource.com/24155
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This will be needed by other architectures as well.
Put a cleaner encapsulation around it.
Change-Id: I0ac25d600378042b2233301678e9d037e20701d8
Reviewed-on: https://go-review.googlesource.com/24154
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Use hardware g register (R10) for GetG, allow g to appear at LHS of
some ops.
Progress on SSA backend for ARM. Now everything compiles and runs.
Updates #15365.
Change-Id: Icdf93585579faa86cc29b1e17ab7c90f0119fc4e
Reviewed-on: https://go-review.googlesource.com/23952
Reviewed-by: David Chase <drchase@google.com>
Introduce an op MOVWaddr for addresses on ARM, instead of overuse
ADDconst.
Mark MOVWaddr as rematerializable. This fixes a liveness problem: if
it were not rematerializable, the address of a variable may be spilled
and later use of the address may just load the spilled value without
mentioning the variable, and the liveness code may think it is dead
prematurely.
Update #15365.
Change-Id: Ib0b0fa826bdb75c9e6bb362b95c6cf132cc6b1c0
Reviewed-on: https://go-review.googlesource.com/23942
Reviewed-by: David Chase <drchase@google.com>
- 64x signed right shift was wrong for shift larger than 0x80000000.
- for Lsh-followed-by-Rsh, the intermediate value should be full int
width, so when it is spilled MOVW should be used.
- use RET for RetJmp, so the assembler can take case of restoring LR
for non-leaf case.
- reserve R9 in dynlink mode. R9 is used for GOT by the assembler.
Progress on SSA backend for ARM. Still not complete.
Updates #15365.
Change-Id: I3caca256b92ff7cf96469da2feaf4868a592efc5
Reviewed-on: https://go-review.googlesource.com/23793
Reviewed-by: David Chase <drchase@google.com>
Machine supports (or the runtime simulates in soft float mode)
(u)int32<->float conversions. The frontend rewrites int64<->float
conversions to call to runtime function.
For int64->float32 conversion, the frontend generates
. . AS u(100) l(10) tc(1)
. . . NAME-main.~r1 u(1) a(true) g(1) l(9) x(8+0) class(PPARAMOUT) f(1) float32
. . . CALLFUNC u(100) l(10) tc(1) float32
. . . . NAME-runtime.int64tofloat64 u(1) a(true) x(0+0) class(PFUNC) tc(1) used(true) FUNC-func(int64) float64
The CALLFUNC node has type float32, whereas runtime.int64tofloat64
returns float64. The legacy backend implicitly makes a float64->float32
conversion. The SSA backend does not do implicit conversion, so we
insert an explicit CONV here.
All cmd/compile/internal/gc/testdata/*_ssa.go tests passed.
Progress on SSA for ARM. Still not complete.
Update #15365.
Change-Id: I30937c8ff977271246b068f48224693776804339
Reviewed-on: https://go-review.googlesource.com/23652
Reviewed-by: Keith Randall <khr@golang.org>
This CL adds support of Div, Mod, Convert, GetClosurePtr and 64-bit indexing
support to SSA backend for ARM.
Add tests for 64-bit indexing to cmd/compile/internal/gc/testdata/string_ssa.go.
Tests cmd/compile/internal/gc/testdata/*_ssa.go passed, except compound_ssa.go
and fp_ssa.go.
Progress on SSA for ARM. Still not complete. Essentially the only unsupported
part is floating point.
Updates #15365.
Change-Id: I269e88b67f641c25e7a813d910c96d356d236bff
Reviewed-on: https://go-review.googlesource.com/23542
Reviewed-by: David Chase <drchase@google.com>
Also fix a mistake in previous CL about x8 and x16 shifts:
the shift needs ZeroExt.
Progress on SSA for ARM. Still not complete.
Updates #15365.
Change-Id: Ibc352760023d38bc6b9c5251e929fe26e016637a
Reviewed-on: https://go-review.googlesource.com/23486
Reviewed-by: David Chase <drchase@google.com>
Introduce dec64 rules to (generically) decompose 64-bit integer on
32-bit architectures. 64-bit integer is composed/decomposed with
Int64Make/Hi/Lo ops, as for complex types.
The idea of dealing with Add64 is the following:
(Add64 (Int64Make xh xl) (Int64Make yh yl))
->
(Int64Make
(Add32withcarry xh yh (Select0 (Add32carry xl yl)))
(Select1 (Add32carry xl yl)))
where Add32carry returns a tuple (flags,uint32). Select0 and Select1
read the first and the second component of the tuple, respectively.
The two Add32carry will be CSE'd.
Similarly for multiplication, Mul32uhilo returns a tuple (hi, lo).
Also add support of KeepAlive, to fix build after merge.
Tests addressed_ssa.go, array_ssa.go, break_ssa.go, chan_ssa.go,
cmp_ssa.go, ctl_ssa.go, map_ssa.go, and string_ssa.go in
cmd/compile/internal/gc/testdata passed.
Progress on SSA for ARM. Still not complete.
Updates #15365.
Change-Id: I7867c76785a456312de5d8398a6b3f7ca5a4f7ec
Reviewed-on: https://go-review.googlesource.com/23213
Reviewed-by: Keith Randall <khr@golang.org>
Also fix argument offset for runtime calls.
Also fix LoadReg/StoreReg by generating instructions by type.
Progress on SSA backend for ARM. Still not complete.
Tests append_ssa.go, assert_ssa.go, loadstore_ssa.go, short_ssa.go, and
deferNoReturn.go in cmd/compile/internal/gc/testdata passed.
Updates #15365.
Change-Id: I0f0a2398cab8bbb461772a55241a16a7da2ecedf
Reviewed-on: https://go-review.googlesource.com/23212
Reviewed-by: David Chase <drchase@google.com>
