We check whether an M is preemptible in a surprising number of places.
Put it in one function.
For #10958, #24543.
Change-Id: I305090fdb1ea7f7a55ffe25851c1e35012d0d06c
Reviewed-on: https://go-review.googlesource.com/c/go/+/201439
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, gcscanvalid is used to resolve a race between attempts to
scan a stack. Now that there's a clear owner of the stack scan
operation, there's no longer any danger of racing or attempting to
scan a stack more than once, so this CL eliminates gcscanvalid.
I double-checked my reasoning by first adding a throw if gcscanvalid
was set in scanstack and verifying that all.bash still passed.
For #10958, #24543.
Fixes#24363.
Change-Id: I76794a5fcda325ed7cfc2b545e2a839b8b3bc713
Reviewed-on: https://go-review.googlesource.com/c/go/+/201139
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Currently, the process of suspending a goroutine is tied to stack
scanning. In preparation for non-cooperative preemption, this CL
abstracts this into general purpose suspendG/resumeG functions.
suspendG and resumeG closely follow the existing scang and restartg
functions with one exception: the addition of a _Gpreempted status.
Currently, preemption tasks (stack scanning) are carried out by the
target goroutine if it's in _Grunning. In this new approach, the task
is always carried out by the goroutine that called suspendG. Thus, we
need a reliable way to drive the target goroutine out of _Grunning
until the requesting goroutine is ready to resume it. The new
_Gpreempted state provides the handshake: when a runnable goroutine
responds to a preemption request, it now parks itself and enters
_Gpreempted. The requesting goroutine races to put it in _Gwaiting,
which gives it ownership, but also the responsibility to start it
again.
This CL adds several TODOs about improving the synchronization on the
G status. The existing code already has these problems; we're just
taking note of them.
The next CL will remove the now-dead scang and preemptscan.
For #10958, #24543.
Change-Id: I16dbf87bea9d50399cc86719c156f48e67198f16
Reviewed-on: https://go-review.googlesource.com/c/go/+/201137
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We already claim on the documentation for _Grunning that this is case,
but execute transitions to _Grunning before assigning g.m. Fix this
and make the documentation even more explicit.
For #10958, #24543, but also a good cleanup.
Change-Id: I1eb0108e7762f55cfb0282aca624af1c0a15fe56
Reviewed-on: https://go-review.googlesource.com/c/go/+/201440
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
On ARM and ARM64, during a VDSO call, the g register may be
temporarily clobbered by the VDSO code. If a signal is received
during the execution of VDSO code, we may not find a valid g
reading the g register. In CL 192937, we conservatively assume
g is nil. But this approach has a problem: we cannot handle
the signal in this case. Further, if the signal is not a
profiling signal, we'll call badsignal, which calls needm, which
wants to get an extra m, but we don't have one in a non-cgo
binary, which cuases the program to hang.
This is even more of a problem with async preemption, where we
will receive more signals than before. I ran into this problem
while working on async preemption support on ARM64.
In this CL, before making a VDSO call, we save the g on the
gsignal stack. When we receive a signal, we will be running on
the gsignal stack, so we can fetch the g from there and move on.
We probably want to do the same for PPC64. Currently we rely on
that the VDSO code doesn't actually clobber the g register, but
this is not guaranteed and we don't have control with.
Idea from discussion with Dan Cross and Austin.
Should fix#34391.
Change-Id: Idbefc5e4c2f4373192c2be797be0140ae08b26e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/202759
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Since the new timers run on g0, which does not have a race context,
we add a race context field to the P, and use that for timer functions.
This works since all timer functions are in the standard library.
Updates #27707
Change-Id: I8a5b727b4ddc8ca6fc60eb6d6f5e9819245e395b
Reviewed-on: https://go-review.googlesource.com/c/go/+/171882
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Since timers are now on a P, rather than having a G running timerproc,
timejump changes to return a P rather than a G.
Updates #27707
Change-Id: I3d05af2d664409a0fd906e709fdecbbcbe00b9a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/171880
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
This adds a new field to P, adjustTimers, that tells the P that one of
its existing timers was modified to be earlier, and that it therefore
needs to resort them.
Updates #27707
Change-Id: I4c5f5b51ed116f1d898d3f87cdddfa1b552337f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/171832
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
When we put timers on P's, the wasm code will not be able to rely on
the timer goroutine. Use the beforeIdle hook to schedule a wakeup.
Updates #6239
Updates #27707
Change-Id: Idf6309944778b8c3d7178f5d09431940843ea233
Reviewed-on: https://go-review.googlesource.com/c/go/+/171827
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This change introduces an arm intrinsic that generates the FMULAD
instruction for the fused-multiply-add operation on systems that
support it. System support is detected via cpu.ARM.HasVFPv4. A rewrite
rule translates the generic intrinsic to FMULAD.
Updates #25819.
Change-Id: I8459e5dd1cdbdca35f88a78dbeb7d387f1e20efa
Reviewed-on: https://go-review.googlesource.com/c/go/+/142117
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add support to the main scheduler loop for handling timers on P's.
This is not used yet, as timers are not yet put on P's.
Updates #6239
Updates #27707
Change-Id: I6a359df408629f333a9232142ce19e8be8496dae
Reviewed-on: https://go-review.googlesource.com/c/go/+/171826
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
To permit ssa-level optimization, this change introduces an amd64 intrinsic
that generates the VFMADD231SD instruction for the fused-multiply-add
operation on systems that support it. System support is detected via
cpu.X86.HasFMA. A rewrite rule can then translate the generic ssa intrinsic
("Fma") to VFMADD231SD.
The benchmark compares the software implementation (old) with the intrinsic
(new).
name old time/op new time/op delta
Fma-4 27.2ns ± 1% 1.0ns ± 9% -96.48% (p=0.008 n=5+5)
Updates #25819.
Change-Id: I966655e5f96817a5d06dff5942418a3915b09584
Reviewed-on: https://go-review.googlesource.com/c/go/+/137156
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This new facility will be used by future CLs in this series.
Change the only blocking call to netpoll to do the right thing when
netpoll returns an empty list.
Updates #6239
Updates #27707
Change-Id: I58b3c2903eda61a3698b1a4729ed0e81382bb1ed
Reviewed-on: https://go-review.googlesource.com/c/go/+/171821
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Change the comment to make more conformable to the function implementation.
Change-Id: I8461e2f09824c50e16223a27d0f61070f04bd21b
GitHub-Last-Rev: c25a8493d3
GitHub-Pull-Request: golang/go#27404
Reviewed-on: https://go-review.googlesource.com/c/go/+/132477
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This change makes it so that worldsema isn't held across the mark phase.
This means that various operations like ReadMemStats may now stop the
world during the mark phase, reducing latency on such operations.
Only three such operations are still no longer allowed to occur during
marking: GOMAXPROCS, StartTrace, and StopTrace.
For the former it's because any change to GOMAXPROCS impacts GC mark
background worker scheduling and the details there are tricky.
For the latter two it's because tracing needs to observe consistent GC
start and GC end events, and if StartTrace or StopTrace may stop the
world during marking, then it's possible for it to see a GC end event
without a start or GC start event without an end, respectively.
To ensure that GOMAXPROCS and StartTrace/StopTrace cannot proceed until
marking is complete, the runtime now holds a new semaphore, gcsema,
across the mark phase just like it used to with worldsema.
Fixes#19812.
Change-Id: I15d43ed184f711b3d104e8f267fb86e335f86bf9
Reviewed-on: https://go-review.googlesource.com/c/go/+/182657
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The existing condition is long and repetitive. Using select/case with
multiple values in the expression list is more concise and clearer.
Change-Id: I43f8abcf958e433468728f1d89ff1436332b29da
Reviewed-on: https://go-review.googlesource.com/c/go/+/188519
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use efaceOf to safely convert from *interface{} to *_eface, and to
make it clearer what the pointer arithmetic is computing.
Incidentally, remove a spurious unsafe.Pointer->*uint8->unsafe.Pointer
round trip conversion in newproc.
No behavior change.
Change-Id: I2ad9d791d35d8bd008ef43b03dad1589713c5fd4
Reviewed-on: https://go-review.googlesource.com/c/go/+/190457
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
CL 42652 changed the profile handler for mips/mipsle to
avoid recording a profile when in atomic functions, for fear
of interrupting the 32-bit simulation of a 64-bit atomic with
a lock. The profile logger itself uses 64-bit atomics and might
deadlock (#20146).
The change was to accumulate a count of dropped profile events
and then send the count when the next ordinary event was sent:
if prof.hz != 0 {
+ if (GOARCH == "mips" || GOARCH == "mipsle") && lostAtomic64Count > 0 {
+ cpuprof.addLostAtomic64(lostAtomic64Count)
+ lostAtomic64Count = 0
+ }
cpuprof.add(gp, stk[:n])
}
CL 117057 extended this behavior to include GOARCH == "arm".
Unfortunately, the inserted cpuprof.addLostAtomic64 differs from
the original cpuprof.add in that it neglects to acquire the lock
protecting the profile buffer.
This has caused a steady stream of flakes on the arm builders
for the past 12 months, ever since CL 117057 landed.
This CL moves the lostAtomic count into the profile buffer and
then lets the existing addExtra calls take care of it, instead of
duplicating the locking logic.
Fixes#24991.
Change-Id: Ia386c40034fcf46b31f080ce18f2420df4bb8004
Reviewed-on: https://go-review.googlesource.com/c/go/+/184164
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This marks all Go symbols called from assembly in other packages with
"go:linkname" directives to ensure they get ABI wrappers.
Now that we have this go:linkname convention, this also removes the
abi0Syms definition in the runtime, which was used to give morestackc
an ABI0 wrapper. Instead, we now just mark morestackc with a
go:linkname directive.
This was tested with buildall.bash in the default configuration, with
-race, and with -gcflags=all=-d=ssa/intrinsics/off. Since I couldn't
test cgo on non-Linux configurations, I manually grepped for runtime
symbols in runtime/cgo.
Updates #31230.
Change-Id: I6c8aa56be2ca6802dfa2bf159e49c411b9071bf1
Reviewed-on: https://go-review.googlesource.com/c/go/+/179862
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
First, remove the randomization of initialization order.
Then, revert to source code order instead of sorted package path order.
This restores the behavior that was in 1.12.
A larger change which will implement the suggestion in #31636 will
wait for 1.14. It's too complicated for 1.13 at this point (it has
tricky interactions with plugins).
Fixes#31636
Change-Id: I35b48e8cc21cf9f93c0973edd9193d2eac197628
Reviewed-on: https://go-review.googlesource.com/c/go/+/178297
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This was left over from the C->Go transition.
Change-Id: I52494af3d49a388dc45b57210ba68292ae01cf84
Reviewed-on: https://go-review.googlesource.com/c/go/+/176897
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change removes the periodic scavenger which goes over every span
in the heap and scavenges it if it hasn't been used for 5 minutes. It
should no longer be necessary if we have background scavenging
(follow-up).
For #30333.
Change-Id: Ic3a1a4e85409dc25719ba4593a3b60273a4c71e0
Reviewed-on: https://go-review.googlesource.com/c/go/+/143157
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This repairs one of the several causes of pauses uncovered
by a GC microbenchmark. A pause can occur when a goroutine's
quantum expires "at the same time" a GC is needed. The
current M switches to running a GC worker, which means that
the amount of available work has expanded by one. The GC
worker, however, does not call ready, and does not itself
conditionally wake a P (a "normal" thread would do this).
This is also true if M switches to a traceReader.
This is problem 4 in this list:
https://github.com/golang/go/issues/27732#issuecomment-423301252
Updates #27732.
Change-Id: I6905365cac8504cde6faab2420f4421536551f0b
Reviewed-on: https://go-review.googlesource.com/c/go/+/146817
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This change modifies the treap implementation to be address-ordered
instead of size-ordered, and further augments it so it may be used for
allocation. It then modifies the find method to implement a first-fit
allocation policy.
This change to the treap implementation consequently makes it so that
spans are scavenged in highest-address-first order without any
additional changes to the scavenging code. Because the treap itself is
now address ordered, and the scavenging code iterates over it in
reverse, the highest address is now chosen instead of the largest span.
This change also renames the now wrongly-named "scavengeLargest" method
on mheap to just "scavengeLocked" and also fixes up logic in that method
which made assumptions about size.
For #30333.
Change-Id: I94b6f3209211cc1bfdc8cdaea04152a232cfbbb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/164101
Run-TryBot: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Like GOOS=android which implies the "linux" build tag, GOOS=illumos
implies the "solaris" build tag. This lets the existing ecosystem of
packages still work on illumos, but still permits packages to start
differentiating between solaris and illumos.
Fixes#20603
Change-Id: I8f4eabf1a66060538dca15d7658c1fbc6c826622
Reviewed-on: https://go-review.googlesource.com/c/go/+/174457
Run-TryBot: Benny Siegert <bsiegert@gmail.com>
Reviewed-by: Benny Siegert <bsiegert@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When a callback runs on a different thread in Windows, as in the
runtime package test TestCallbackInAnotherThread, it will use the
extra M. That can cause the test in checkdead to fail incorrectly.
Check whether there actually is an extra M before expecting it.
I think this is a general problem unrelated to timers. I think the test
was passing previously because the timer goroutine was using an M.
But I haven't proved that. This change seems correct, and it avoids
the test failure when using the new timers on Windows.
Updates #27707
Change-Id: Ieb31c04ff0354d6fae7e173b59bcfadb8b0464cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/174037
Reviewed-by: Keith Randall <khr@golang.org>
Ps are strictly numbered from 0 to GOMAXPROCS-1, so if procresize
happens to be running on a P that's being destroyed, it moves itself
to P 0.
However, currently procresize destroys the unused Ps *before* moving
itself to P 0. This means it may briefly run on a destroyed P. This is
basically harmless, but has at least one very confusing consequence:
since destroying a P has write barriers, it may enqueue pointers to a
destroyed write barrier buffer. As far as I can tell, there are no
negative consequences of this, but this seems really fragile.
This CL swaps the order of things, so now procresize moves itself to P
0 if necessary before destroying Ps. This ensures it always has a
valid P.
This is part of refactoring for #10958 and #24543, but is a good
cleanup regardless.
Change-Id: I91a23dd6ed27e372f8d6291feec9bc991bcf9812
Reviewed-on: https://go-review.googlesource.com/c/go/+/173941
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
This is one small step to force people to not depend on the order of
initialization of packages which are not explicitly ordered by import
directives. Similar to randomizing map iteration order, this makes
sure people aren't depending on the behavior of the current release,
so that we can change the order in future releases without breaking
everyone.
Maybe one day we can randomize always, but for now we do it just in
race mode. (We would need to measure the impact on startup time before
we enabled it always.)
RELNOTE=yes
Change-Id: I99026394796125974c5f2c3660a88becb92c9df3
Reviewed-on: https://go-review.googlesource.com/c/go/+/170318
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
It is easier to ensure that the symbol is always present
if we move it to package runtime. Avoids init-time work.
Also moves it next to buildVersion, the other similar symbol.
Setting up for "go version <binary>".
For #31624.
Change-Id: I943724469ce6992153e701257eb6f12da88c8e4e
Reviewed-on: https://go-review.googlesource.com/c/go/+/173341
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Some of the comments were unclear or outdated.
Change-Id: I02e01bf60def0074c1fa760e94aa992e9e4969b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/172987
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
g.m is an muintptr, but we want to print it in hex like a pointer.
Change-Id: Ifc48ed77fb2e93cff7a49d98adc7b9679d26c3b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/172988
Run-TryBot: Austin Clements <austin@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
procresize is rather ungainly because it includes all of the code to
initialize new Ps and tear down unused Ps. Pull these out into their
own methods on the p type. This also tweaks the initialization loop in
procresize so we only initialize new Ps (and Ps we previously
destroyed) rather than asking each P "have you been initialized?"
This is for #10958 and #24543, but it's also just a nice cleanup.
Change-Id: Ic1242066f572c94a23cea8ea4dc47c918e31d559
Reviewed-on: https://go-review.googlesource.com/c/go/+/171762
Reviewed-by: Michael Knyszek <mknyszek@google.com>
A goroutine should be preempted if it runs for 10ms without blocking.
We found that this doesn't work for goroutines which call short system calls.
For example, the next program can stuck for seconds without this fix:
$ cat main.go
package main
import (
"runtime"
"syscall"
)
func main() {
runtime.GOMAXPROCS(1)
c := make(chan int)
go func() {
c <- 1
for {
t := syscall.Timespec{
Nsec: 300,
}
if true {
syscall.Nanosleep(&t, nil)
}
}
}()
<-c
}
$ time go run main.go
real 0m8.796s
user 0m0.367s
sys 0m0.893s
Updates #10958
Change-Id: Id3be54d3779cc28bfc8b33fe578f13778f1ae2a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/170138
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We've copy-pasted the pattern of releasem in many places. This CL
replaces almost everywhere that manipulates g.m.locks and g.preempt
with calls to acquirem/releasem. There are a few where we do something
more complicated, like where exitsyscall has to restore the stack
bound differently depending on the preempt flag, which this CL leaves
alone.
Change-Id: Ia7a46c261daea6e7802b80e7eb9227499f460433
Reviewed-on: https://go-review.googlesource.com/c/go/+/170064
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Both g and p had a racectx field, but they held different kinds of values.
The g field held ThreadState values while the p field held Processor values
(to use the names used in the C++ code in the compiler_rt support library).
Rename the p field to raceprocctx to reduce potential confusion.
Change-Id: Iefba0e259d240171e973054c452c3c15bf3f8f8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/169960
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
R14, R15 must be saved in sigtramp because they might be modified by Go
code when a SIGPROF occurs.
Fixes#28555
Change-Id: I573541f108d7d6aac8e60d33c649e5db943f3ef5
Reviewed-on: https://go-review.googlesource.com/c/go/+/169117
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Instead of writing an init function per package that does the same
thing for every package, just write that implementation once in the
runtime. Change the compiler to generate a data structure that encodes
the required initialization operations.
Reduces cmd/go binary size by 0.3%+. Most of the init code is gone,
including all the corresponding stack map info. The .inittask
structures that replace them are quite a bit smaller.
Most usefully to me, there is no longer an init function in every -S output.
(There is an .inittask global there, but it's much less distracting.)
After this CL we could change the name of the "init.ializers" function
back to just "init".
Update #6853
R=go1.13
Change-Id: Iec82b205cc52fe3ade4d36406933c97dbc9c01b1
Reviewed-on: https://go-review.googlesource.com/c/go/+/161337
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Use the length of the bitmap to decide how much to pass to the
write barrier, not the total length of the arguments.
The test needs enough arguments so that two distinct bitmaps
get interpreted as a single longer bitmap.
Update #29362
Change-Id: I78f3f7f9ec89c2ad4678f0c52d3d3def9cac8e72
Reviewed-on: https://go-review.googlesource.com/c/156123
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
After CL 31455, "go fun(n)" may put "n" to write barrier buffer
when there are no pointers in fun's arguments.
Fixes#29362
Change-Id: Icfa42b8759ce8ad9267dcb3859c626feb6fda381
Reviewed-on: https://go-review.googlesource.com/c/155779
Reviewed-by: Keith Randall <khr@golang.org>
When a locked M has its G exit without calling UnlockOSThread, then
lockedExt on it was getting cleared. Unfortunately, this meant that
during P handoff, if a new M was started, it might get forked (on
most OSs besides Windows) from the locked M, which could have kernel
state attached to it.
To solve this, just don't clear lockedExt. At the point where the
locked M has its G exit, it will also exit in accordance with the
LockOSThread API. So, we can safely assume that it's lockedExt state
will no longer be used. For the case of the main thread where it just
gets wedged instead of exiting, it's probably better for it to keep
the locked marker since it more accurately represents its state.
Fixed#28979.
Change-Id: I7d3d71dd65bcb873e9758086d2cbcb9a06429b0f
Reviewed-on: https://go-review.googlesource.com/c/153078
Run-TryBot: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Austin Clements <austin@google.com>
Without this, each additional C frame found via SetCgoTraceback will
cause a frame to be dropped from the bottom of the traceback stack.
Fixes#29034
Change-Id: I90aa6b2a1dced90c69b64c5dd565fe64a25724a3
Reviewed-on: https://go-review.googlesource.com/c/151917
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Change internal/cpu feature configuration to use
GODEBUG=cpu.feature1=value,cpu.feature2=value...
instead of GODEBUGCPU=feature1=value,feature2=value... .
This is not a backwards compatibility breaking change
since GODEBUGCPU was introduced in go1.11 as an
undocumented compiler experiment.
Fixes#28757
Change-Id: Ib21b3fed2334baeeb061a722ab1eb513d1137e87
Reviewed-on: https://go-review.googlesource.com/c/149578
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The current support_XXX variables are specific for the
amd64 and 386 platforms.
Prefix processor capability variables by architecture to have a
consistent naming scheme and avoid reuse of the existing
variables for new platforms.
This also aligns naming of runtime variables closer with internal/cpu
processor capability variable names.
Change-Id: I3eabb29a03874678851376185d3a62e73c1aff1d
Reviewed-on: https://go-review.googlesource.com/c/91435
Run-TryBot: Martin Möhrmann <martisch@uos.de>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When a goroutine enters a syscall, its M unwires from its P to allow
the P to be retaken by another M if the syscall is slow. The M retains a
reference to its old P, however, so that if its old P has not been
retaken when the syscall returns, it can quickly reacquire that P.
The implementation, however, was confusing, as it left the reference to
the potentially-retaken P in m.p, which implied that the P was still
wired.
Make the code clearer by enforcing the invariant that m.p is never
stale. entersyscall now moves m.p to m.oldp and sets m.p to 0;
exitsyscall does the reverse, provided m.oldp has not been retaken.
With this scheme in place, the issue described in #27660 (assertion
failures in the race detector) would have resulted in a clean segfault
instead of silently corrupting memory.
Change-Id: Ib3e03623ebed4f410e852a716919fe4538858f0a
Reviewed-on: https://go-review.googlesource.com/c/148899
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
With this change, callbacks returned by syscall/js.NewCallback
get executed synchronously. This is necessary for the APIs of
many JavaScript libraries.
A callback triggered during a call from Go to JavaScript gets executed
on the same goroutine. A callback triggered by JavaScript's event loop
gets executed on an extra goroutine.
Fixes#26045Fixes#27441
Change-Id: I591b9e85ab851cef0c746c18eba95fb02ea9e85b
Reviewed-on: https://go-review.googlesource.com/c/142004
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Go documentation style for boolean funcs is to say:
// Foo reports whether ...
func Foo() bool
(rather than "returns true if")
This CL also replaces 4 uses of "iff" with the same "reports whether"
wording, which doesn't lose any meaning, and will prevent people from
sending typo fixes when they don't realize it's "if and only if". In
the past I think we've had the typo CLs updated to just say "reports
whether". So do them all at once.
(Inspired by the addition of another "returns true if" in CL 146938
in fd_plan9.go)
Created with:
$ perl -i -npe 's/returns true if/reports whether/' $(git grep -l "returns true iff" | grep -v vendor)
$ perl -i -npe 's/returns true if/reports whether/' $(git grep -l "returns true if" | grep -v vendor)
Change-Id: Ided502237f5ab0d25cb625dbab12529c361a8b9f
Reviewed-on: https://go-review.googlesource.com/c/147037
Reviewed-by: Ian Lance Taylor <iant@golang.org>
