Apparently it falls into infinite printing loop. Skipping for now.
Will investigate.
For #62671.
Change-Id: I5be8e8c1d0f4f2eaa231d6bcdfe13e7f08c28b98
Reviewed-on: https://go-review.googlesource.com/c/go/+/528403
Reviewed-by: Bryan Mills <bcmills@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
The stack bounds from pthread are not always accurate, and could
cause seg fault if we run out of the actual stack space before
reaching the bounds. Here we use an artificially small stack bounds
to check overflow without actually running out of the system stack.
Change-Id: I8067c5e1297307103b315d9d0c60120293b57aab
Reviewed-on: https://go-review.googlesource.com/c/go/+/523695
Reviewed-by: Michael Pratt <mpratt@google.com>
Run-TryBot: Cherry Mui <cherryyz@google.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Use ^ and $ in the -run flag regular expression value when the intention
is to invoke a single named test. This removes the reliance on there not
being another similarly named test to achieve the intended result.
In particular, package syscall has tests named TestUnshareMountNameSpace
and TestUnshareMountNameSpaceChroot that both trigger themselves setting
GO_WANT_HELPER_PROCESS=1 to run alternate code in a helper process. As a
consequence of overlap in their test names, the former was inadvertently
triggering one too many helpers.
Spotted while reviewing CL 525196. Apply the same change in other places
to make it easier for code readers to see that said tests aren't running
extraneous tests. The unlikely cases of -run=TestSomething intentionally
being used to run all tests that have the TestSomething substring in the
name can be better written as -run=^.*TestSomething.*$ or with a comment
so it is clear it wasn't an oversight.
Change-Id: Iba208aba3998acdbf8c6708e5d23ab88938bfc1e
Reviewed-on: https://go-review.googlesource.com/c/go/+/524948
Reviewed-by: Tobias Klauser <tobias.klauser@gmail.com>
Auto-Submit: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Kirill Kolyshkin <kolyshkin@gmail.com>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Also add a check that we didn't leave any core files behind.
Change-Id: I30444ef43ad1a8cc1cacd3b75280f2128e104939
Reviewed-on: https://go-review.googlesource.com/c/go/+/525175
Reviewed-by: Ian Lance Taylor <iant@google.com>
Reviewed-by: Keith Randall <khr@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
LUCI-TryBot-Result: Go LUCI <golang-scoped@luci-project-accounts.iam.gserviceaccount.com>
Reviewed-by: Keith Randall <khr@golang.org>
We used to decrement it in netpollgoready, but that missed
the common case of a descriptor becoming ready due to I/O.
All calls to netpollgoready go through netpollunblock,
so this shouldn't miss any decrements we missed before.
Fixes#60782
Change-Id: Ideefefa1ac96ca38e09fe2dd5d595c5dd7883237
Reviewed-on: https://go-review.googlesource.com/c/go/+/503923
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
If running testprog fails, print the output.
For #60901.
Change-Id: Iee80fb09412ce13bae6ac3589779a8cdf7761765
Reviewed-on: https://go-review.googlesource.com/c/go/+/507978
Reviewed-by: Michael Pratt <mpratt@google.com>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Run-TryBot: Cherry Mui <cherryyz@google.com>
This test fails when run on ios. (Although ios does not normally
support "exec", in the corellium environment it does.)
For #26061.
Change-Id: Idfdc53758aaabf0cb87ae50f9a4666deebf57fd6
Reviewed-on: https://go-review.googlesource.com/c/go/+/487355
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
internal/platform.MustLinkExternal is used in various places to
determine whether external linking is required. It should always
match what the linker actually requires, but today does not match
because the linker imposes additional constraints.
Updates #31544.
Change-Id: I0cc6ad587e95c607329dea5d60d29a5fb2a9e722
Reviewed-on: https://go-review.googlesource.com/c/go/+/472515
Run-TryBot: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
This test previously failed if running a new pthread took longer than
a hard-coded 100ms. On some slow or heavily-loaded builders, that
scheduling latency is too short.
Since the point of this test is to verify that the background thread
is not reused after it terminates (see #20395), the arbitrary time
limit does not seem helpful: if the background thread fails to
terminate the test will time out on its own, and if the main goroutine
is scheduled on the background thread the test will fail regardless of
how long it takes.
Fixes#58247.
Change-Id: I626af52aac55af7a4c0e7829798573c479750c20
Reviewed-on: https://go-review.googlesource.com/c/go/+/464735
Run-TryBot: Bryan Mills <bcmills@google.com>
Reviewed-by: Michael Pratt <mpratt@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
This may fix the TestEINTR failures that have been frequent on the
riscv64 builders since CL 445597.
Updates #37405.
Updates #39043.
Change-Id: Iaf1403ff5ce2ff0203d5d0059908097d32d0b217
Reviewed-on: https://go-review.googlesource.com/c/go/+/447495
Auto-Submit: Bryan Mills <bcmills@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
ErrWaitDelay is not expected to occur in this test, but if it does
it indicates a failure mode very different from the “failed to start”
catchall that we log for other non-ExitError errors.
Updates #50436.
Change-Id: I3f4d87d502f772bf471fc17303d5a6b483446f8f
Reviewed-on: https://go-review.googlesource.com/c/go/+/446876
Reviewed-by: Ian Lance Taylor <iant@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Auto-Submit: Bryan Mills <bcmills@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
For most tests, the test's deadline itself is more appropriate than an
arbitrary timeout layered atop of it (especially once #48157 is
implemented), and testenv.Command already adds cleaner timeout
behavior when a command would run too close to the test's deadline.
That makes RunWithTimeout something of an attractive nuisance. For
now, migrate the two existing uses of it to testenv.CommandContext,
with a shorter timeout implemented using context.WithTimeout.
As a followup, we may want to drop the extra timeouts from these
invocations entirely.
Updates #50436.
Updates #37405.
Change-Id: I16840fd36c0137b6da87ec54012b3e44661f0d08
Reviewed-on: https://go-review.googlesource.com/c/go/+/445597
Reviewed-by: Ian Lance Taylor <iant@google.com>
Run-TryBot: Bryan Mills <bcmills@google.com>
Auto-Submit: Bryan Mills <bcmills@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Add new line at the end of crash_test.go.
Change-Id: I73c77666066b105e563215f34e7ede6c1d92226b
Reviewed-on: https://go-review.googlesource.com/c/go/+/422299
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
In issue #17671, there are a endless loop if printing
the panic value panics, CL 30358 has fixed that.
As issue #52257 pointed out, above change should not
discard the value from panic while panicking.
With this CL, when we recover from a panic in error.Error()
or stringer.String(), and the recovered value is string,
then we can print it normally.
Fixes#52257
Change-Id: Icfcc4a1a390635de405eea04904b4607ae9e3055
Reviewed-on: https://go-review.googlesource.com/c/go/+/399874
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@google.com>
Auto-Submit: Ian Lance Taylor <iant@google.com>
Reviewed-by: Dmitri Shuralyov <dmitshur@golang.org>
Reviewed-by: Dmitri Shuralyov <dmitshur@google.com>
This makes it easier to figure out where the crash is occurring.
Change-Id: Ie1f78a360367090dcd61c61b2a55c34f3e2ff2eb
Reviewed-on: https://go-review.googlesource.com/c/go/+/390034
Trust: David Chase <drchase@google.com>
Reviewed-by: David Chase <drchase@google.com>
Trust: Michael Pratt <mpratt@google.com>
Run-TryBot: Michael Pratt <mpratt@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Cherry Mui <cherryyz@google.com>
And then revert the bootstrap cmd directories and certain testdata.
And adjust tests as needed.
Not reverting the changes in std that are bootstrapped,
because some of those changes would appear in API docs,
and we want to use any consistently.
Instead, rewrite 'any' to 'interface{}' in cmd/dist for those directories
when preparing the bootstrap copy.
A few files changed as a result of running gofmt -w
not because of interface{} -> any but because they
hadn't been updated for the new //go:build lines.
Fixes#49884.
Change-Id: Ie8045cba995f65bd79c694ec77a1b3d1fe01bb09
Reviewed-on: https://go-review.googlesource.com/c/go/+/368254
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
TryBot-Result: Gopher Robot <gobot@golang.org>
This lifts the logic to run a subcommand with a timeout in a test from
the runtime's runTestProg into testenv. The implementation is
unchanged in this CL. We'll improve it in a future CL.
Currently, tests that run subcommands usually just timeout with no
useful output if the subcommand runs for too long. This is a step
toward improving this.
For #37405.
Change-Id: I2298770db516e216379c4c438e05d23cbbdda51d
Reviewed-on: https://go-review.googlesource.com/c/go/+/370701
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gopher Robot <gobot@golang.org>
Reviewed-by: Michael Knyszek <mknyszek@google.com>
Reviewed-by: Bryan Mills <bcmills@google.com>
On illumos nanotime calls libc, like on the other systems for which
TestTimePprof is skipped.
For #43118
Change-Id: I370d3f098a261185920cb1e3e3402d16200e301a
Reviewed-on: https://go-review.googlesource.com/c/go/+/366737
Trust: Tobias Klauser <tobias.klauser@gmail.com>
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Fixes#43118
Change-Id: I499bf335904e2b72a2a8876d0368fff5e69aa7fa
Reviewed-on: https://go-review.googlesource.com/c/go/+/366759
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Permit a test whose program is already built to run immediately,
rather than waiting for another test to complete its build.
For #44422
Change-Id: I2d1b35d055ee4c4251f4caef3b52dccc82b71a1b
Reviewed-on: https://go-review.googlesource.com/c/go/+/364654
Trust: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
We add entries to the defer list at panic/goexit time on-the-fly for
frames with open-coded defers. We do this so that we can correctly
process open-coded defers and non-open-coded defers in the correct order
during panics/goexits. But we need to remove entries for open-coded
defers from the defer list when there is a recover, since those entries
may never get removed otherwise and will get stale, since their
corresponding defers may now be processed normally (inline).
This bug here is that we were only removing higher-up stale entries
during a recover if all defers in the current frame were done. But we
could have more defers in the current frame (as the new test case
shows). In this case, we need to leave the current defer entry around
for use by deferreturn, but still remove any stale entries further along
the chain.
For bug 43921, simple change that we should abort the removal loop for
any defer entry that is started (i.e. in process by a still
not-recovered outer panic), even if it is not an open-coded defer.
This change does not fix bug 43920, which looks to be a more complex fix.
Fixes#43882Fixes#43921
Change-Id: Ie05b2fa26973aa26b25c8899a2abc916090ee4f5
Reviewed-on: https://go-review.googlesource.com/c/go/+/286712
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
As part of #42026, these helpers from io/ioutil were moved to os.
(ioutil.TempFile and TempDir became os.CreateTemp and MkdirTemp.)
Update the Go tree to use the preferred names.
As usual, code compiled with the Go 1.4 bootstrap toolchain
and code vendored from other sources is excluded.
ReadDir changes are in a separate CL, because they are not a
simple search and replace.
For #42026.
Change-Id: If318df0216d57e95ea0c4093b89f65e5b0ababb3
Reviewed-on: https://go-review.googlesource.com/c/go/+/266365
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit 3a81338622.
Reason for revert: Some edge cases not properly covered due to changes within runtime traceback generation since 2017, that need to be examined. This change landed very late in the Go1.16 cycle.
Change-Id: I8cf6f46ea0ef6161d878e79943e6c7cdac94bccf
Reviewed-on: https://go-review.googlesource.com/c/go/+/268577
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
This CL makes it so that instead of printing massive stack traces during
endless recursion, which spams users and aren't useful, it now prints out
the top and bottom 50 frames. If the number of frames <= 100
(_TracebackMaxFrames), we'll just print all the frames out.
Modified gentraceback to return counts of:
* ntotalframes
* nregularframes
which allows us to get accurate counts of the various kinds of frames.
While here, also fixed a bug that resulted from CL 37222, in which we
no longer accounted for decrementing requested frame skips, and assumed
that when printing, that skip would always be 0. The fix is instead to add
precondition that we'll only print if skip <= 0, but also decrement skip
as we iterate.
Fixes#7181.
Fixes#24628.
Change-Id: Ie31ec6413fdfbe43827b254fef7d99ea26a5277f
Reviewed-on: https://go-review.googlesource.com/c/go/+/37222
Run-TryBot: Emmanuel Odeke <emmanuel@orijtech.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Emmanuel Odeke <emmanuel@orijtech.com>
On macOS, we can do "go build", can exec, and have the source
tree available, so we can enable more tests.
Skip ones that don't work. Most of them are due to that it
requires external linking (for now) and some tests don't work
with external linking (e.g. runtime deadlock detection). For
them, helper functions CanInternalLink/MustInternalLink are
introduced. I still want to have internal linking implemented,
but it is still a good idea to identify which tests don't work
with external linking.
Updates #38485.
Change-Id: I6b14697573cf3f371daf54b9ddd792acf232f2f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/260719
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
We've seen timeouts of TestTimePprof, but the tracebacks aren't useful
because goroutines are running on other threads. Add GOTRACEBACK=crash
to catch these in the future.
For #41120.
Change-Id: I97318172ef78d0cbab10df5e4ffcbfeadff579e3
Reviewed-on: https://go-review.googlesource.com/c/go/+/258802
Trust: Austin Clements <austin@google.com>
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
When a locked M wants to start a new M, it hands off to the template
thread to actually call clone and start the thread. The template thread
is lazily created the first time a thread is locked (or if cgo is in
use).
stoplockedm will release the P (_Pidle), then call handoffp to give the
P to another M. In the case of a pending STW, one of two things can
happen:
1. handoffp starts an M, which does acquirep followed by schedule, which
will finally enter _Pgcstop.
2. handoffp immediately enters _Pgcstop. This only occurs if the P has
no local work, GC work, and no spinning M is required.
If handoffp starts an M, and must create a new M to do so, then newm
will simply queue the M on newmHandoff for the template thread to do the
clone.
When a stop-the-world is required, stopTheWorldWithSema will start the
stop and then wait for all Ps to enter _Pgcstop. If the template thread
is not fully created because startTemplateThread gets stopped, then
another stoplockedm may queue an M that will never get created, and the
handoff P will never leave _Pidle. Thus stopTheWorldWithSema will wait
forever.
A sequence to trigger this hang when STW occurs can be visualized with
two threads:
T1 T2
------------------------------- -----------------------------
LockOSThread LockOSThread
haveTemplateThread == 0
startTemplateThread
haveTemplateThread = 1
newm haveTemplateThread == 1
preempt -> schedule g.m.lockedExt++
gcstopm -> _Pgcstop g.m.lockedg = ...
park g.lockedm = ...
return
... (any code)
preempt -> schedule
stoplockedm
releasep -> _Pidle
handoffp
startm (first 3 handoffp cases)
newm
g.m.lockedExt != 0
Add to newmHandoff, return
park
Note that the P in T2 is stuck sitting in _Pidle. Since the template
thread isn't running, the new M will not be started complete the
transition to _Pgcstop.
To resolve this, we disable preemption around the assignment of
haveTemplateThread and the creation of the template thread in order to
guarantee that if handTemplateThread is set then the template thread
will eventually exist, in the presence of stops.
Fixes#38931
Change-Id: I50535fbbe2f328f47b18e24d9030136719274191
Reviewed-on: https://go-review.googlesource.com/c/go/+/232978
Run-TryBot: Michael Pratt <mpratt@google.com>
Reviewed-by: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Print the current SP and (old) stack bounds when the stack grows
too large. This helps to identify the problem: whether a large
stack is used, or something else goes wrong.
For #35470.
Change-Id: I34a4064d5c7280978391d835e171b90d06f87222
Reviewed-on: https://go-review.googlesource.com/c/go/+/207351
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
The check is not relevant anymore.
The comment claims that go run does not rebuild packages,
but this is not true. And we use go build anyway.
We may have added the check because without caching
rebuilding everything starting from runtime for each test
takes a while. But now we have caching.
So from every side this check just adds code and pain.
Change-Id: Ifbbb643724100622e5f9db884339b67cde4ba729
Reviewed-on: https://go-review.googlesource.com/c/go/+/202450
Run-TryBot: Dmitry Vyukov <dvyukov@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
When we do a successful recover of a panic, we resume normal execution by
returning from the frame that had the deferred call that did the recover (after
executing any remaining deferred calls in that frame).
However, suppose we have called runtime.Goexit and there is a panic during one of the
deferred calls run by the Goexit. Further assume that there is a deferred call in
the frame of the Goexit or a parent frame that does a recover. Then the recovery
process will actually resume normal execution above the Goexit frame and hence
abort the Goexit. We will not terminate the thread as expected, but continue
running in the frame above the Goexit.
To fix this, we explicitly create a _panic object for a Goexit call. We then
change the "abort" behavior for Goexits, but not panics. After a recovery, if the
top-level panic is actually a Goexit that is marked to be aborted, then we return
to the Goexit defer-processing loop, so that the Goexit is not actually aborted.
Actual code changes are just panic.go, runtime2.go, and funcid.go. Adjusted the
test related to the new Goexit behavior (TestRecoverBeforePanicAfterGoexit) and
added several new tests of aborted panics (whose behavior has not changed).
Fixes#29226
Change-Id: Ib13cb0074f5acc2567a28db7ca6912cfc47eecb5
Reviewed-on: https://go-review.googlesource.com/c/go/+/200081
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Add a bunch of extra tests and benchmarks for defer, in preparation for new
low-cost (open-coded) implementation of defers (see #34481),
- New file defer_test.go that tests a bunch more unusual defer scenarios,
including things that might have problems for open-coded defers.
- Additions to callers_test.go actually verifying what the stack trace looks like
for various panic or panic-recover scenarios.
- Additions to crash_test.go testing several more crash scenarios involving
recursive panics.
- New benchmark in runtime_test.go measuring speed of panic-recover
- New CGo benchmark in cgo_test.go calling from Go to C back to Go that
shows defer overhead
Updates #34481
Change-Id: I423523f3e05fc0229d4277dd00073289a5526188
Reviewed-on: https://go-review.googlesource.com/c/go/+/197017
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
CL 192937 introduced some changes which weren't properly gofmt'ed. Do so
now.
Change-Id: I2d2d57ea8a79fb41bc4ca59fa23f12198d615fd8
Reviewed-on: https://go-review.googlesource.com/c/go/+/196812
Run-TryBot: Tobias Klauser <tobias.klauser@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As discussed in #32912, a crash occurs when go runtime calls a VDSO function (say
__vdso_clock_gettime) and a signal arrives to that thread.
Since VDSO functions temporarily destroy the G register (R10),
Go functions asynchronously executed in that thread (i.e. Go's signal
handler) can try to load data from the destroyed G, which causes
segmentation fault.
To fix the issue a guard is inserted in front of sigtrampgo, so that the control escapes from
signal handlers without touching G in case the signal occurred in the VDSO context.
The test case included in the patch is take from discussion in a relevant thread on github:
https://github.com/golang/go/issues/32912#issuecomment-517874531.
This patch not only fixes the issue on AArch64 but also that on 32bit ARM.
Fixes#32912
Change-Id: I657472e54b7aa3c617fabc5019ce63aa4105624a
GitHub-Last-Rev: 28ce42c4a0
GitHub-Pull-Request: golang/go#34030
Reviewed-on: https://go-review.googlesource.com/c/go/+/192937
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
R14, R15 must be saved in sigtramp because they might be modified by Go
code when a SIGPROF occurs.
Fixes#28555
Change-Id: I573541f108d7d6aac8e60d33c649e5db943f3ef5
Reviewed-on: https://go-review.googlesource.com/c/go/+/169117
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
It turns out not to be necessary. Russ expressed a preference for
avoiding module fetches over making 'go mod tidy' work within std and
cmd right away, so for now we will make the loader use the vendor
directory for the standard library even if '-mod=vendor' is not set
explicitly.
Updates #30228
Change-Id: Idf7208e63da8cb7bfe281b93ec21b61d40334947
Reviewed-on: https://go-review.googlesource.com/c/go/+/166357
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jay Conrod <jayconrod@google.com>
In runtime.gopanic, the _panic object p is stack allocated and
referenced from gp._panic. With stack objects, p on stack is dead
at the point preprintpanics runs. gp._panic points to p, but
stack scan doesn't look at gp. Heap scan of gp does look at
gp._panic, but it stops and ignores the pointer as it points to
the stack. So whatever p points to may be collected and clobbered.
We need to scan gp._panic explicitly during stack scan.
To test it reliably, we introduce a GODEBUG mode "clobberfree",
which clobbers the memory content when the GC frees an object.
Fixes#30150.
Change-Id: I11128298f03a89f817faa221421a9d332b41dced
Reviewed-on: https://go-review.googlesource.com/c/161778
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
This commit skips tests which aren't yet supported on AIX.
nosplit.go is disabled because stackGuardMultiplier is increased for
syscalls.
Change-Id: Ib5ff9a4539c7646bcb6caee159f105ff8a160ad7
Reviewed-on: https://go-review.googlesource.com/c/146939
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
This makes TestRuntimePanic keep most of the existing environment,
just as the other runtime tests do.
Change-Id: I7944abfeee292d41716dca14483134a50d75f081
Reviewed-on: https://go-review.googlesource.com/135376
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This test is skipped on Linux and should be skipped on Android for the
same reason.
Change-Id: I753c4788d935bd58874554b455c0d5be2315b794
Reviewed-on: https://go-review.googlesource.com/122585
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 122515 tightened TestAbort to look for breakpoint exceptions and
not just general signal crashes, but this only applies on x86 arches.
On non-x86 arches we use a nil pointer dereference to abort, so the
test is now failing.
This CL re-loosens TestAbort on non-x86 arches to only expect a signal
traceback.
Should fix the build on linux/arm, linux/arm64, linux/ppc64, and
linux/s390x.
Change-Id: I1065341180ab5ab4da63b406c641dcde93c9490b
Reviewed-on: https://go-review.googlesource.com/122580
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Since CL 122515, TestAbort is failing on Plan 9
because there is no SIGTRAP signal on Plan 9,
but a note containing the "sys: breakpoint" string.
This change fixes the TestAbort test by handling
the Plan 9 case.
Fixes#26265.
Change-Id: I2fae00130bcee1cf946d8cc9d147a77f951be390
Reviewed-on: https://go-review.googlesource.com/122464
Run-TryBot: David du Colombier <0intro@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Currently, if the runtime overflows the g0 stack on Windows, it leads
to an infinite recursion:
1. Something overflows the g0 stack bounds and calls morestack.
2. morestack determines it's on the g0 stack and hence cannot grow the
stack, so it calls badmorestackg0 (which prints "fatal: morestack on
g0") followed by abort.
3. abort performs an INT $3, which turns into a Windows
_EXCEPTION_BREAKPOINT exception.
4. This enters the Windows sigtramp, which ensures we're on the g0
stack and calls exceptionhandler.
5. exceptionhandler has a stack check prologue, so it determines that
it's out of stack and calls morestack.
6. goto 2
Fix this by making the exception handler avoid stack checks until it
has ruled out an abort and by blowing away the stack bounds in
lastcontinuehandler before we print the final fatal traceback (which
itself involves a lot of stack bounds checks).
Fixes#21382.
Change-Id: Ie66e91f708e18d131d97f22b43f9ac26f3aece5a
Reviewed-on: https://go-review.googlesource.com/120857
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
On Windows, the IP recorded in the breakpoint exception caused by
runtime.abort is actually one byte after the INT3, unlike on UNIX
OSes. Account for this in isgoexception.
It turns out TestAbort was "passing" on Windows anyway because abort
still caused a fatal panic, just not the one we were expecting. This
CL tightens this test to check that the runtime specifically reports a
breakpoint exception.
Fixing this is related to #21382, since we use runtime.abort in
reporting g0 stack overflows, and it's important that we detect this
and not try to handle it.
Change-Id: I66120944d138eb80f839346b157a3759c1019e34
Reviewed-on: https://go-review.googlesource.com/122515
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Alex Brainman <alex.brainman@gmail.com>
If the runtime code panics due to a bad index or slice expression,
then throw instead of panicing. This will skip calls to recover and dump
the entire runtime stack trace. The runtime should never panic due to
an out of bounds index, and this will help with debugging if it does.
For #24991
Updates #25201
Change-Id: I85a9feded8f0de914ee1558425931853223c0514
Reviewed-on: https://go-review.googlesource.com/121515
Reviewed-by: Austin Clements <austin@google.com>
On all non-x86 arches, runtime.abort simply reads from nil.
Unfortunately, if this happens on a user stack, the signal handler
will dutifully turn this into a panicmem, which lets user defers run
and which user code can even recover from.
To fix this, add an explicit check to the signal handler that turns
faults in abort into hard crashes directly in the signal handler. This
has the added benefit of giving a register dump at the abort point.
Change-Id: If26a7f13790745ee3867db7f53b72d8281176d70
Reviewed-on: https://go-review.googlesource.com/93661
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Currently if a profiling signal arrives while executing within a VDSO
the profiler will report _ExternalCode, which is needlessly confusing
for a pure Go program. Change the VDSO calling code to record the
caller's PC/SP, so that we can do a traceback from that point. If that
fails for some reason, report _VDSO rather than _ExternalCode, which
should at least point in the right direction.
This adds some instructions to the code that calls the VDSO, but the
slowdown is reasonably negligible:
name old time/op new time/op delta
ClockVDSOAndFallbackPaths/vDSO-8 40.5ns ± 2% 41.3ns ± 1% +1.85% (p=0.002 n=10+10)
ClockVDSOAndFallbackPaths/Fallback-8 41.9ns ± 1% 43.5ns ± 1% +3.84% (p=0.000 n=9+9)
TimeNow-8 41.5ns ± 3% 41.5ns ± 2% ~ (p=0.723 n=10+10)
Fixes#24142
Change-Id: Iacd935db3c4c782150b3809aaa675a71799b1c9c
Reviewed-on: https://go-review.googlesource.com/97315
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
