Using statement nodes restricts the set of valid SetOp operations,
because you can't SetOp across representation. Rewrite various
code to avoid crossing those as-yet-unintroduced boundaries.
In particular, code like
x, y := v.(T)
x, y := f()
x, y := m[k]
x, y := <-c
starts out with Op = OAS2, and then it turns into a specific Op
OAS2DOTTYPE, OAS2FUNC, OAS2MAPR, OAS2RECV, and then
later in walk is lowered to an OAS2 again.
In the middle, the specific forms move the right-hand side from
n.Rlist().First() to n.Right(), and then the conversion to OAS2 moves
it back. This is unnecessary and makes it hard for these all to
share an underlying Node implementation.
This CL changes these specific forms to leave the right-hand side
in n.Rlist().First().
Similarly, OSELRECV2 is really just a temporary form of OAS2.
This CL changes it to use same fields too.
Finally, this CL fixes the printing of OAS2 nodes in ir/fmt.go,
which formerly printed n.Right() instead of n.Rlist().
This results in a (correct!) update to cmd/compile/internal/logopt's
expected output: ~R0 = <N> becomes ~R0 = &y.b.
Passes buildall w/ toolstash -cmp.
Change-Id: I164aa2e17dc55bfb292024de53d7d250192ad64a
Reviewed-on: https://go-review.googlesource.com/c/go/+/274105
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The type syntax is reused to stand in for the actual type once typechecked,
to avoid updating all the possible references to the original type syntax.
So all these implementations allow changing their Op from the raw syntax
like OTMAP to the finished form OTYPE, even though obviously the
representation does not change.
Passes buildall w/ toolstash -cmp.
Change-Id: I4acca1a5b35fa2f48ee08e8f1e5a330a004c284b
Reviewed-on: https://go-review.googlesource.com/c/go/+/274103
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This is a general operation on IR nodes, so it belongs in ir.
The copied implementation is adapted to support the
extension pattern, allowing nodes to implement their
own DeepCopy implementations if needed.
This is the first step toward higher-level operations instead
of Left, Right, etc. It will allow the new type syntax nodes
to be properly immutable and opt out of those fine-grained methods.
Passes buildall w/ toolstash -cmp.
Change-Id: Ibd64061e01daf14aebc6586cb2eb2b12057ca85a
Reviewed-on: https://go-review.googlesource.com/c/go/+/274102
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that we have specific types for ONAME and ODCLFUNC nodes
(*Name and *Func), use them throughout the compiler to be more
precise about what data is being operated on.
This is a somewhat large CL, but once you start applying the types
in a few places, you end up needing to apply them to many other
places to keep everything type-checking. A lot of code also melts
away as types are added.
Passes buildall w/ toolstash -cmp.
Change-Id: I21dd9b945d701c470332bac5394fca744a5b232d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274097
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Before this CL, an ONAME Node was represented by three structs
linked together: a node, a Name, and a Param. Previous CLs removed
OLABEL and OPACK from the set of nodes that knew about Name.
Now Name can be repurposed to *be* the ONAME Node implementation,
replacing three linked structs totaling 152+64+88 = 304 bytes (64-bit)
with a single 232-byte struct.
Many expressions in the code become simpler as well, without having
to use .Param. and sometimes even .Name().
(For a node n where n.Name() != nil, n.Name() == n.(*Name) now.)
Passes buildall w/ toolstash -cmp.
Change-Id: Ie719f1285c05623b9fd2faaa059e5b360a64b3be
Reviewed-on: https://go-review.googlesource.com/c/go/+/274094
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
OPACK was using a whole Node and Name and Param
to hold about three fields. Give it its own implementation.
Passes buildall w/ toolstash -cmp.
Change-Id: I85a28b43d37183b2062d337b0b1b2eea52884e8c
Reviewed-on: https://go-review.googlesource.com/c/go/+/274093
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
- The use of a label's Name.Defn to point at the named for/select/switch
means that any rewrite of the for/select/switch must overwrite the original
or else the pointer will dangle. Remove that pointer by adding the label
name directly to the for/select/switch representation instead.
- The only uses of a label's Sym.Label were ephemeral values during
markbreak and escape analysis. Use a map for each. Although in general
we are not going to replace all computed fields with maps (too slow),
the one in markbreak is only for labeled for/select/switch, and the one
in escape is for all labels, but even so, labels are fairly rare.
In theory this cleanup should make it easy to allow labeled for/select/switch
in inlined bodies, but this CL does not attempt that. It's only concerned
with cleanup to enable a new Node representation.
Passes buildall w/ toolstash -cmp.
Change-Id: I7e36ee98d2ea40dbae94e6722d585f007b7afcfa
Reviewed-on: https://go-review.googlesource.com/c/go/+/274086
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The plan is to introduce a Node interface that replaces the old *Node pointer-to-struct.
The previous CL defined an interface INode modeling a *Node.
This CL:
- Changes all references outside internal/ir to use INode,
along with many references inside internal/ir as well.
- Renames Node to node.
- Renames INode to Node
So now ir.Node is an interface implemented by *ir.node, which is otherwise inaccessible,
and the code outside package ir is now (clearly) using only the interface.
The usual rule is never to redefine an existing name with a new meaning,
so that old code that hasn't been updated gets a "unknown name" error
instead of more mysterious errors or silent misbehavior. That rule would
caution against replacing Node-the-struct with Node-the-interface,
as in this CL, because code that says *Node would now be using a pointer
to an interface. But this CL is being landed at the same time as another that
moves Node from gc to ir. So the net effect is to replace *gc.Node with ir.Node,
which does follow the rule: any lingering references to gc.Node will be told
it's gone, not silently start using pointers to interfaces. So the rule is followed
by the CL sequence, just not this specific CL.
Overall, the loss of inlining caused by using interfaces cuts the compiler speed
by about 6%, a not insignificant amount. However, as we convert the representation
to concrete structs that are not the giant Node over the next weeks, that speed
should come back as more of the compiler starts operating directly on concrete types
and the memory taken up by the graph of Nodes drops due to the more precise
structs. Honestly, I was expecting worse.
% benchstat bench.old bench.new
name old time/op new time/op delta
Template 168ms ± 4% 182ms ± 2% +8.34% (p=0.000 n=9+9)
Unicode 72.2ms ±10% 82.5ms ± 6% +14.38% (p=0.000 n=9+9)
GoTypes 563ms ± 8% 598ms ± 2% +6.14% (p=0.006 n=9+9)
Compiler 2.89s ± 4% 3.04s ± 2% +5.37% (p=0.000 n=10+9)
SSA 6.45s ± 4% 7.25s ± 5% +12.41% (p=0.000 n=9+10)
Flate 105ms ± 2% 115ms ± 1% +9.66% (p=0.000 n=10+8)
GoParser 144ms ±10% 152ms ± 2% +5.79% (p=0.011 n=9+8)
Reflect 345ms ± 9% 370ms ± 4% +7.28% (p=0.001 n=10+9)
Tar 149ms ± 9% 161ms ± 5% +8.05% (p=0.001 n=10+9)
XML 190ms ± 3% 209ms ± 2% +9.54% (p=0.000 n=9+8)
LinkCompiler 327ms ± 2% 325ms ± 2% ~ (p=0.382 n=8+8)
ExternalLinkCompiler 1.77s ± 4% 1.73s ± 6% ~ (p=0.113 n=9+10)
LinkWithoutDebugCompiler 214ms ± 4% 211ms ± 2% ~ (p=0.360 n=10+8)
StdCmd 14.8s ± 3% 15.9s ± 1% +6.98% (p=0.000 n=10+9)
[Geo mean] 480ms 510ms +6.31%
name old user-time/op new user-time/op delta
Template 223ms ± 3% 237ms ± 3% +6.16% (p=0.000 n=9+10)
Unicode 103ms ± 6% 113ms ± 3% +9.53% (p=0.000 n=9+9)
GoTypes 758ms ± 8% 800ms ± 2% +5.55% (p=0.003 n=10+9)
Compiler 3.95s ± 2% 4.12s ± 2% +4.34% (p=0.000 n=10+9)
SSA 9.43s ± 1% 9.74s ± 4% +3.25% (p=0.000 n=8+10)
Flate 132ms ± 2% 141ms ± 2% +6.89% (p=0.000 n=9+9)
GoParser 177ms ± 9% 183ms ± 4% ~ (p=0.050 n=9+9)
Reflect 467ms ±10% 495ms ± 7% +6.17% (p=0.029 n=10+10)
Tar 183ms ± 9% 197ms ± 5% +7.92% (p=0.001 n=10+10)
XML 249ms ± 5% 268ms ± 4% +7.82% (p=0.000 n=10+9)
LinkCompiler 544ms ± 5% 544ms ± 6% ~ (p=0.863 n=9+9)
ExternalLinkCompiler 1.79s ± 4% 1.75s ± 6% ~ (p=0.075 n=10+10)
LinkWithoutDebugCompiler 248ms ± 6% 246ms ± 2% ~ (p=0.965 n=10+8)
[Geo mean] 483ms 504ms +4.41%
[git-generate]
cd src/cmd/compile/internal/ir
: # We need to do the conversion in multiple steps, so we introduce
: # a temporary type alias that will start out meaning the pointer-to-struct
: # and then change to mean the interface.
rf '
mv Node OldNode
add node.go \
type Node = *OldNode
'
: # It should work to do this ex in ir, but it misses test files, due to a bug in rf.
: # Run the command in gc to handle gc's tests, and then again in ssa for ssa's tests.
cd ../gc
rf '
ex . ../arm ../riscv64 ../arm64 ../mips64 ../ppc64 ../mips ../wasm {
import "cmd/compile/internal/ir"
*ir.OldNode -> ir.Node
}
'
cd ../ssa
rf '
ex {
import "cmd/compile/internal/ir"
*ir.OldNode -> ir.Node
}
'
: # Back in ir, finish conversion clumsily with sed,
: # because type checking and circular aliases do not mix.
cd ../ir
sed -i '' '
/type Node = \*OldNode/d
s/\*OldNode/Node/g
s/^func (n Node)/func (n *OldNode)/
s/OldNode/node/g
s/type INode interface/type Node interface/
s/var _ INode = (Node)(nil)/var _ Node = (*node)(nil)/
' *.go
gofmt -w *.go
sed -i '' '
s/{Func{}, 136, 248}/{Func{}, 152, 280}/
s/{Name{}, 32, 56}/{Name{}, 44, 80}/
s/{Param{}, 24, 48}/{Param{}, 44, 88}/
s/{node{}, 76, 128}/{node{}, 88, 152}/
' sizeof_test.go
cd ../ssa
sed -i '' '
s/{LocalSlot{}, 28, 40}/{LocalSlot{}, 32, 48}/
' sizeof_test.go
cd ../gc
sed -i '' 's/\*ir.Node/ir.Node/' mkbuiltin.go
cd ../../../..
go install std cmd
cd cmd/compile
go test -u || go test -u
Change-Id: I196bbe3b648e4701662e4a2bada40bf155e2a553
Reviewed-on: https://go-review.googlesource.com/c/go/+/272935
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The pointer hack was nice and saved a word, but it's untenable
in a world where nodes are themselves interfaces with different
underlying types. Bite the bullet and use an interface to hold the
Node when in types.Sym and types.Type.
This has the nice benefit of removing AsTypesNode entirely.
AsNode is still useful because of its nil handling.
Change-Id: I298cba9ff788b956ee287283bec78010e8b601e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/272933
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If we want to break up package gc at all, we will need to move
the compiler IR it defines into a separate package that can be
imported by packages that gc itself imports. This CL does that.
It also removes the TINT8 etc aliases so that all code is clear
about which package things are coming from.
This CL is automatically generated by the script below.
See the comments in the script for details about the changes.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
# These names were never fully qualified
# when the types package was added.
# Do it now, to avoid confusion about where they live.
inline -rm \
Txxx \
TINT8 \
TUINT8 \
TINT16 \
TUINT16 \
TINT32 \
TUINT32 \
TINT64 \
TUINT64 \
TINT \
TUINT \
TUINTPTR \
TCOMPLEX64 \
TCOMPLEX128 \
TFLOAT32 \
TFLOAT64 \
TBOOL \
TPTR \
TFUNC \
TSLICE \
TARRAY \
TSTRUCT \
TCHAN \
TMAP \
TINTER \
TFORW \
TANY \
TSTRING \
TUNSAFEPTR \
TIDEAL \
TNIL \
TBLANK \
TFUNCARGS \
TCHANARGS \
NTYPE \
BADWIDTH
# esc.go and escape.go do not need to be split.
# Append esc.go onto the end of escape.go.
mv esc.go escape.go
# Pull out the type format installation from func Main,
# so it can be carried into package ir.
mv Main:/Sconv.=/-0,/TypeLinkSym/-1 InstallTypeFormats
# Names that need to be exported for use by code left in gc.
mv Isconst IsConst
mv asNode AsNode
mv asNodes AsNodes
mv asTypesNode AsTypesNode
mv basicnames BasicTypeNames
mv builtinpkg BuiltinPkg
mv consttype ConstType
mv dumplist DumpList
mv fdumplist FDumpList
mv fmtMode FmtMode
mv goopnames OpNames
mv inspect Inspect
mv inspectList InspectList
mv localpkg LocalPkg
mv nblank BlankNode
mv numImport NumImport
mv opprec OpPrec
mv origSym OrigSym
mv stmtwithinit StmtWithInit
mv dump DumpAny
mv fdump FDumpAny
mv nod Nod
mv nodl NodAt
mv newname NewName
mv newnamel NewNameAt
mv assertRepresents AssertValidTypeForConst
mv represents ValidTypeForConst
mv nodlit NewLiteral
# Types and fields that need to be exported for use by gc.
mv nowritebarrierrecCallSym SymAndPos
mv SymAndPos.lineno SymAndPos.Pos
mv SymAndPos.target SymAndPos.Sym
mv Func.lsym Func.LSym
mv Func.setWBPos Func.SetWBPos
mv Func.numReturns Func.NumReturns
mv Func.numDefers Func.NumDefers
mv Func.nwbrCalls Func.NWBRCalls
# initLSym is an algorithm left behind in gc,
# not an operation on Func itself.
mv Func.initLSym initLSym
mv nodeQueue NodeQueue
mv NodeQueue.empty NodeQueue.Empty
mv NodeQueue.popLeft NodeQueue.PopLeft
mv NodeQueue.pushRight NodeQueue.PushRight
# Many methods on Node are actually algorithms that
# would apply to any node implementation.
# Those become plain functions.
mv Node.funcname FuncName
mv Node.isBlank IsBlank
mv Node.isGoConst isGoConst
mv Node.isNil IsNil
mv Node.isParamHeapCopy isParamHeapCopy
mv Node.isParamStackCopy isParamStackCopy
mv Node.isSimpleName isSimpleName
mv Node.mayBeShared MayBeShared
mv Node.pkgFuncName PkgFuncName
mv Node.backingArrayPtrLen backingArrayPtrLen
mv Node.isterminating isTermNode
mv Node.labeledControl labeledControl
mv Nodes.isterminating isTermNodes
mv Nodes.sigerr fmtSignature
mv Node.MethodName methodExprName
mv Node.MethodFunc methodExprFunc
mv Node.IsMethod IsMethod
# Every node will need to implement RawCopy;
# Copy and SepCopy algorithms will use it.
mv Node.rawcopy Node.RawCopy
mv Node.copy Copy
mv Node.sepcopy SepCopy
# Extract Node.Format method body into func FmtNode,
# but leave method wrapper behind.
mv Node.Format:0,$ FmtNode
# Formatting helpers that will apply to all node implementations.
mv Node.Line Line
mv Node.exprfmt exprFmt
mv Node.jconv jconvFmt
mv Node.modeString modeString
mv Node.nconv nconvFmt
mv Node.nodedump nodeDumpFmt
mv Node.nodefmt nodeFmt
mv Node.stmtfmt stmtFmt
# Constant support needed for code moving to ir.
mv okforconst OKForConst
mv vconv FmtConst
mv int64Val Int64Val
mv float64Val Float64Val
mv Node.ValueInterface ConstValue
# Organize code into files.
mv LocalPkg BuiltinPkg ir.go
mv NumImport InstallTypeFormats Line fmt.go
mv syntax.go Nod NodAt NewNameAt Class Pxxx PragmaFlag Nointerface SymAndPos \
AsNode AsTypesNode BlankNode OrigSym \
Node.SliceBounds Node.SetSliceBounds Op.IsSlice3 \
IsConst Node.Int64Val Node.CanInt64 Node.Uint64Val Node.BoolVal Node.StringVal \
Node.RawCopy SepCopy Copy \
IsNil IsBlank IsMethod \
Node.Typ Node.StorageClass node.go
mv ConstType ConstValue Int64Val Float64Val AssertValidTypeForConst ValidTypeForConst NewLiteral idealType OKForConst val.go
# Move files to new ir package.
mv bitset.go class_string.go dump.go fmt.go \
ir.go node.go op_string.go val.go \
sizeof_test.go cmd/compile/internal/ir
'
: # fix mkbuiltin.go to generate the changes made to builtin.go during rf
sed -i '' '
s/\[T/[types.T/g
s/\*Node/*ir.Node/g
/internal\/types/c \
fmt.Fprintln(&b, `import (`) \
fmt.Fprintln(&b, ` "cmd/compile/internal/ir"`) \
fmt.Fprintln(&b, ` "cmd/compile/internal/types"`) \
fmt.Fprintln(&b, `)`)
' mkbuiltin.go
gofmt -w mkbuiltin.go
: # update cmd/dist to add internal/ir
cd ../../../dist
sed -i '' '/compile.internal.gc/a\
"cmd/compile/internal/ir",
' buildtool.go
gofmt -w buildtool.go
: # update cmd/compile TestFormats
cd ../..
go install std cmd
cd cmd/compile
go test -u || go test # first one updates but fails; second passes
Change-Id: I5f7caf6b20629b51970279e81231a3574d5b51db
Reviewed-on: https://go-review.googlesource.com/c/go/+/273008
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Move Flag, Debug, Ctxt, Exit, and error messages to
new package cmd/compile/internal/base.
These are the core functionality that everything in gc uses
and which otherwise prevent splitting any other code
out of gc into different packages.
A minor milestone: the compiler source code
no longer contains the string "yy".
[git-generate]
cd src/cmd/compile/internal/gc
rf '
mv atExit AtExit
mv Ctxt atExitFuncs AtExit Exit base.go
mv lineno Pos
mv linestr FmtPos
mv flusherrors FlushErrors
mv yyerror Errorf
mv yyerrorl ErrorfAt
mv yyerrorv ErrorfVers
mv noder.yyerrorpos noder.errorAt
mv Warnl WarnfAt
mv errorexit ErrorExit
mv base.go debug.go flag.go print.go cmd/compile/internal/base
'
: # update comments
sed -i '' 's/yyerrorl/ErrorfAt/g; s/yyerror/Errorf/g' *.go
: # bootstrap.go is not built by default so invisible to rf
sed -i '' 's/Fatalf/base.Fatalf/' bootstrap.go
goimports -w bootstrap.go
: # update cmd/dist to add internal/base
cd ../../../dist
sed -i '' '/internal.amd64/a\
"cmd/compile/internal/base",
' buildtool.go
gofmt -w buildtool.go
Change-Id: I59903c7084222d6eaee38823fd222159ba24a31a
Reviewed-on: https://go-review.googlesource.com/c/go/+/272250
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The original meaning of type Func was "extra fields factored out
of a few cases of type Node having to do with functions",
but those specific cases didn't necessarily have any relation.
A typical declared function is represented by an ODCLFUNC Node
at its declaration and an ONAME node at its uses, and both those
have a .Func field, but they are *different* Funcs.
Similarly, a closure is represented both by an OCLOSURE Node for
the value itself and an ODCLFUNC Node for the underlying function
implementing the closure. Those too have *different* Funcs,
and the Func.Closure field in one points to the other and vice versa.
This has led to no end of confusion over the years.
This CL elevates type Func to be the canonical identifier for
a given Go function.
This looks like a trivial CL but in fact is the result of a lot of
scaffolding and rewriting, discarded once the result was achieved, to
separate out the three different kinds of Func nodes into three
separate fields, limited in use to each specific Node type, to
understand which Func fields are used by which Node types and what the
possible overlaps are. There were a few overlaps, most notably around
closures, which led to more fields being added to type Func to keep
them separate even though there is now a single Func instead of two
different ones for each function.
A future CL can and should change Curfn to be a *Func instead of
a *Node, finally eliminating the confusion about whether Curfn
is an ODCLFUNC node (as it is most of the time) or an ONAME node
(as it is when type-checking an inlined function body).
Although sizeof_test.go makes it look like Func is growing by two
words, there are now half as many Funcs in a running compilation,
so the memory footprint has actually been reduced substantially.
Change-Id: I598bd96c95728093dc769a835d48f2154a406a61
Reviewed-on: https://go-review.googlesource.com/c/go/+/272253
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Since CL 255217, we've been able to rely on types.UntypedRune to
identify untyped rune literals, rather than needing Mpint.Rune /
CTRUNE. This makes way for switching to using go/constant, which
doesn't have a separate notion of rune constants distinct from integer
constants.
Passes toolstash-check.
Change-Id: I319861f4758aeea17345c101b167cb307e706a0e
Reviewed-on: https://go-review.googlesource.com/c/go/+/272652
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
We want to introduce a package cmd/compile/internal/base,
and these will shadow it at points where it is needed.
Change-Id: Ic936733fba1ccba8c2ca1fdedbd4d2989df4bbf4
Reviewed-on: https://go-review.googlesource.com/c/go/+/272249
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Prepare for factoring the error API out of this package by
cleaning it up. The doc comments use the intended new names,
which will be introduced in the next CL.
Change-Id: Ie4c8d4262422da32a9a9f750fda42c225b6b42a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/272248
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This commit contains the compiler support for //go:embed lines.
The go command passes to the compiler an "embed config"
that maps literal patterns like *.txt to the set of files to embed.
The compiler then lays out the content of those files as static data
in the form of an embed.Files or string or []byte in the final object file.
The test for this code is the end-to-end test hooking up the
embed, cmd/compile, and cmd/go changes, in the next CL.
For #41191.
Change-Id: I916e57f8cc65871dc0044c13d3f90c252a3fe1bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/243944
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The Node type has shortcuts to access bool and int Values:
func (n *Node) Int64() int64
for n.Val().U.(*Mpint).Int64()
func (n *Node) Bool() bool
for n.Val().U.(bool)
I was convinced we didn't have one for string literal nodes, until I
noticed that we do, it's just called strlit, it's not a method, and
it's later in the file:
func strlit(n *Node) string
This change, for consistency:
- Renames strlit to StringVal and makes it a *Node method
- Renames Bool and Int64 to BoolVal and Int64Val
- Moves StringVal near the other two
Change-Id: I18e635384c35eb3a238fd52b1ccd322b1a74d733
Reviewed-on: https://go-review.googlesource.com/c/go/+/261361
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
We are converting from using error-prone ad-hoc syntax // +build lines
to less error-prone, standard boolean syntax //go:build lines.
The timeline is:
Go 1.16: prepare for transition
- Builds still use // +build for file selection.
- Source files may not contain //go:build without // +build.
- Builds fail when a source file contains //go:build lines without // +build lines. <<<
Go 1.17: start transition
- Builds prefer //go:build for file selection, falling back to // +build
for files containing only // +build.
- Source files may contain //go:build without // +build (but they won't build with Go 1.16).
- Gofmt moves //go:build and // +build lines to proper file locations.
- Gofmt introduces //go:build lines into files with only // +build lines.
- Go vet rejects files with mismatched //go:build and // +build lines.
Go 1.18: complete transition
- Go fix removes // +build lines, leaving behind equivalent // +build lines.
This CL provides part of the <<< marked line above in the Go 1.16 step:
rejecting files containing //go:build but not // +build.
The standard go command checks only consider the top of the file.
This compiler check, along with a separate go vet check for ignored files,
handles the remainder of the file.
For #41184.
Change-Id: I014006eebfc84ab5943de18bc90449e534f150a2
Reviewed-on: https://go-review.googlesource.com/c/go/+/240601
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
CL 197120 removed the last use of it.
Change-Id: I5fe4f57a47acc712208d831e72cd79205a534c28
Reviewed-on: https://go-review.googlesource.com/c/go/+/252697
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Omits printing the file:line:column when trying to
open non-existent files
Given:
go tool compile x.go
* Before:
x.go:0: open x.go: no such file or directory
* After:
open x.go: no such file or directory
Reverts the revert in CL 231043 by only fixing the case
of non-existent errors which is what the original bug
was about. The fix for "permission errors" will come later
on when I have bandwidth to investigate the differences
between running with root and why os.Open works for some
builders and not others.
Fixes#36437
Change-Id: I9c8a0981ad708b504bb43990a4105b42266fa41f
Reviewed-on: https://go-review.googlesource.com/c/go/+/230941
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Thie CL changes cmd/compile/internal/syntax to give the gc half of
the compiler more control over pragma handling, so that it can prepare
better errors, diagnose misuse, and so on. Before, the API between
the two was hard-coded as a uint16. Now it is an interface{}.
This should set us up better for future directives.
In addition to the split, this CL emits a "misplaced compiler directive"
error for any directive that is in a place where it has no effect.
I've certainly been confused in the past by adding comments
that were doing nothing and not realizing it. This should help
avoid that kind of confusion.
The rule, now applied consistently, is that a //go: directive
must appear on a line by itself immediately before the declaration
specifier it means to apply to. See cmd/compile/doc.go for
precise text and test/directive.go for examples.
This may cause some code to stop compiling, but that code
was broken. For example, this code formerly applied the
//go:noinline to f (not c) but now will fail to compile:
//go:noinline
const c = 1
func f() {}
Change-Id: Ieba9b8d90a27cfab25de79d2790a895cefe5296f
Reviewed-on: https://go-review.googlesource.com/c/go/+/228578
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Previously langSupported applied -lang as though it's a global
restriction, but it's actually a per-package restriction. This CL
fixes langSupported to take a *types.Pkg parameter to reflect this and
updates its callers accordingly.
This is relevant for signed shifts (added in Go 1.12), because they
can be inlined into a Go 1.11 package; and for overlapping interfaces
(added in Go 1.13), because they can be exported as part of the
package's API.
Today we require all Go packages to be compiled with the same
toolchain, and all uses of langSupported are for controlling
backwards-compatible features. So we can simply assume that since the
imported packages type-checked successfully, they must have been
compiled with an appropriate -lang setting.
In the future if we ever want to use langSupported to control
backwards-incompatible language changes, we might need to record the
-lang flag used for compiling a package in its export data.
Fixes#35437.
Fixes#35442.
Change-Id: Ifdf6a62ee80cd5fb4366cbf12933152506d1b36e
Reviewed-on: https://go-review.googlesource.com/c/go/+/205977
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
The slice capacity is known for all these cases. Therefore,
we can initialize them with the desired capacity.
Change-Id: I1835b49108d157203d62e4aa119c2d7ab5e5e46f
Reviewed-on: https://go-review.googlesource.com/c/go/+/200119
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
n.Noescape() was overloaded for two uses: (1) to indicate a function
was annotated with //go:noescape, and (2) to indicate that certain
temporary allocations don't outlive the current statement.
The first use case is redundant with n.Func.Pragma&Noescape!=0, which
is the convention we use for checking other function-level pragmas.
The second use case is better served by renaming "Noescape" to
"Transient".
Passes toolstash-check.
Change-Id: I0f09d2d5767513894b7bf49da9cdabd04aa4a05e
Reviewed-on: https://go-review.googlesource.com/c/go/+/199822
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Previously, we would recognize &(T{...}) expressions during type
checking, rewrite them into (*T){...}, and then do a lot of extra work
to make sure the user doesn't write (*T){...} themselves and
resynthesizing the OPTRLIT later on.
This CL simply handles &T{...} directly in the straight forward
manner, by changing OADDR directly to OPTRLIT when appropriate.
While here, match go/types's invalid composite literal type error
message.
Passes toolstash-check.
Change-Id: I902b14c7e2cd9fa93e6915dd58272d2352ba38f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/197120
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
We used to use OXCASE to represent general, possibly multi-valued
cases, and then desugar these during walk into single-value cases
represented by OCASE.
In CL 194660, we switched to eliminated the desugaring step and
instead handle the multi-valued cases directly, which eliminates the
need for an OCASE Op. Instead, we can simply remove OCASE, and rename
OXCASE to just OCASE.
Passes toolstash-check.
Change-Id: I3cc184340f9081d37453927cca1c059267fdbc12
Reviewed-on: https://go-review.googlesource.com/c/go/+/196117
Reviewed-by: Keith Randall <khr@golang.org>
- only convert literal strings if there were no syntax errors
(some of the conversion routines exit if there is an error)
- mark nodes for literals with syntax errors to avoid follow-on
errors
- don't attempt to import packages whose path had syntax errors
Fixes#32133.
Change-Id: I1803ad48c65abfecf6f48ddff1e27eded5e282c5
Reviewed-on: https://go-review.googlesource.com/c/go/+/192437
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The //go:linkname directive can be used to make a symbol accessible to
another package (when it wouldn't normally be). Sometimes you want to
do this without actually changing the symbol's object file symbol
name; for example, in gccgo this makes unexported symbols non-static,
and in gc this provides ABI0 wrappers for Go symbols so they can be
called from assembly in other packages. Currently, this results in
stutter like
//go:linkname entersyscall runtime.entersyscall
This CL makes the second argument to go:linkname optional for the case
where the intent is simply to expose the symbol rather than to rename
it in the object file.
Updates #31230.
Change-Id: Id06d9c4b2ec3d8e27f9b8a0d65212ab8048d734f
Reviewed-on: https://go-review.googlesource.com/c/go/+/179861
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
There are several places where a new (internal) complex constant is allocated
via new(Mpcplx) rather than newMpcmplx(). The problem with using new() is that
the Mpcplx data structure's Real and Imag components don't get initialized with
an Mpflt of the correct precision (they have precision 0, which may be adjusted
later).
In all cases but one, the components of those complex constants are set using
a Set operation which "inherits" the correct precision from the value that is
being set.
But when creating a complex value for an imaginary literal, the imaginary
component is set via SetString which assumes 64bits of precision by default.
As a result, the internal representation of 0.01i and complex(0, 0.01) was
not correct.
Replaced all used of new(Mpcplx) with newMpcmplx() and added a new test.
Fixes#30243.
Change-Id: Ife7fd6ccd42bf887a55c6ce91727754657e6cb2d
Reviewed-on: https://go-review.googlesource.com/c/163000
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Previously, when a function signature had defined a non-final variadic
parameter, the error message always referred to the type associated with that
parameter. However, if the offending parameter's name was part of an identifier
list with a variadic type, one could misinterpret the message, thinking the
problem had been with one of the other names in the identifer list.
func bar(a, b ...int) {}
clear ~~~~~~~^ ^~~~~~~~ confusing
This change updates the error message and sets the column position to that of
the offending parameter's name, if it exists.
Fixes#28450.
Change-Id: I076f560925598ed90e218c25d70f9449ffd9b3ea
Reviewed-on: https://go-review.googlesource.com/c/152417
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
In assembly free packages (aka "complete" or "pure go"), allow
bodyless functions if they are linkname'd to something else.
Presumably the thing the function is linkname'd to has a definition.
If not, the linker will complain. And linkname is unsafe, so we expect
users to know what they are doing.
Note this handles only one direction, where the linkname directive
is in the local package. If the linkname directive is in the remote
package, this CL won't help. (See os/signal/sig.s for an example.)
Fixes#23311
Change-Id: I824361b4b582ee05976d94812e5b0e8b0f7a18a6
Reviewed-on: https://go-review.googlesource.com/c/151318
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This change does a bulk rename of several identifiers in the compiler.
See #27167 and https://docs.google.com/document/d/19_ExiylD9MRfeAjKIfEsMU1_RGhuxB9sA0b5Zv7byVI/
for context and for discussion of these particular renames.
Commands run to generate this change:
gorename -from '"cmd/compile/internal/gc".OPROC' -to OGO
gorename -from '"cmd/compile/internal/gc".OCOM' -to OBITNOT
gorename -from '"cmd/compile/internal/gc".OMINUS' -to ONEG
gorename -from '"cmd/compile/internal/gc".OIND' -to ODEREF
gorename -from '"cmd/compile/internal/gc".OARRAYBYTESTR' -to OBYTES2STR
gorename -from '"cmd/compile/internal/gc".OARRAYBYTESTRTMP' -to OBYTES2STRTMP
gorename -from '"cmd/compile/internal/gc".OARRAYRUNESTR' -to ORUNES2STR
gorename -from '"cmd/compile/internal/gc".OSTRARRAYBYTE' -to OSTR2BYTES
gorename -from '"cmd/compile/internal/gc".OSTRARRAYBYTETMP' -to OSTR2BYTESTMP
gorename -from '"cmd/compile/internal/gc".OSTRARRAYRUNE' -to OSTR2RUNES
gorename -from '"cmd/compile/internal/gc".Etop' -to ctxStmt
gorename -from '"cmd/compile/internal/gc".Erv' -to ctxExpr
gorename -from '"cmd/compile/internal/gc".Ecall' -to ctxCallee
gorename -from '"cmd/compile/internal/gc".Efnstruct' -to ctxMultiOK
gorename -from '"cmd/compile/internal/gc".Easgn' -to ctxAssign
gorename -from '"cmd/compile/internal/gc".Ecomplit' -to ctxCompLit
Not altered: parameters and local variables (mostly in typecheck.go) named top,
which should probably now be called ctx (and which should probably have a named type).
Also not altered: Field called Top in gc.Func.
gorename -from '"cmd/compile/internal/gc".Node.Isddd' -to IsDDD
gorename -from '"cmd/compile/internal/gc".Node.SetIsddd' -to SetIsDDD
gorename -from '"cmd/compile/internal/gc".nodeIsddd' -to nodeIsDDD
gorename -from '"cmd/compile/internal/types".Field.Isddd' -to IsDDD
gorename -from '"cmd/compile/internal/types".Field.SetIsddd' -to SetIsDDD
gorename -from '"cmd/compile/internal/types".fieldIsddd' -to fieldIsDDD
Not altered: function gc.hasddd, params and local variables called isddd
Also not altered: fmt.go prints nodes using "isddd(%v)".
cd cmd/compile/internal/gc; go generate
I then manually found impacted comments using exact string match
and fixed them up by hand. The comment changes were trivial.
Passes toolstash-check.
Fixes#27167. If this experiment is deemed a success,
we will open a new tracking issue for renames to do
at the end of the 1.13 cycles.
Change-Id: I2dc541533d2ab0d06cb3d31d65df205ecfb151e8
Reviewed-on: https://go-review.googlesource.com/c/150140
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This implements compiler and linker support for separating the
function calling ABI into two ABIs: a stable and an internal ABI. At
the moment, the two ABIs are identical, but we'll be able to evolve
the internal ABI without breaking existing assembly code that depends
on the stable ABI for calling to and from Go.
The Go compiler generates internal ABI symbols for all Go functions.
It uses the symabis information produced by the assembler to create
ABI wrappers whenever it encounters a body-less Go function that's
defined in assembly or a Go function that's referenced from assembly.
Since the two ABIs are currently identical, for the moment this is
implemented using "ABI alias" symbols, which are just forwarding
references to the native ABI symbol for a function. This way there's
no actual code involved in the ABI wrapper, which is good because
we're not deriving any benefit from it right now. Once the ABIs
diverge, we can eliminate ABI aliases.
The linker represents these different ABIs internally as different
versions of the same symbol. This way, the linker keeps us honest,
since every symbol definition and reference also specifies its
version. The linker is responsible for resolving ABI aliases.
Fixes#27539.
Change-Id: I197c52ec9f8fc435db8f7a4259029b20f6d65e95
Reviewed-on: https://go-review.googlesource.com/c/147160
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
The default language version is the current one.
For testing purposes, added a check that type aliases require version
go1.9. There is no consistent support for changes made before 1.12.
Updates #28221
Change-Id: Ia1ef63fff911d5fd29ef79d5fa4e20cfd945feb7
Reviewed-on: https://go-review.googlesource.com/c/144340
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Avoids allocating an ONAME for OLABEL, OGOTO, and named OBREAK and
OCONTINUE nodes.
Passes toolstash-check.
Change-Id: I359142cd48e8987b5bf29ac100752f8c497261c1
Reviewed-on: https://go-review.googlesource.com/c/145200
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
