ARM64 (ARMv8) has 32 general purpose, 64-bit integer registers
(R0-R31), 32 64-bit scalar floating point registers (F0-F31), and
32 128-bit vector registers (unused, V0-V31).
R31 is either the stack pointer (RSP), or the zero register (ZR),
depending on the instruction. Note the distinction between the
hardware stack pointer, RSP, and the virtual stack pointer SP.
The (hardware) stack pointer must be 16-byte aligned at all times;
the RSP register itself must be aligned, offset(RSP) only has to
have natural alignment.
Instructions are fixed-width, and are 32-bit wide. ARM64 supports
ARMv7 too (32-bit ARM), but not in the same process. In general,
there is not much in common between 32-bit ARM and ARM64, it's a
new architecture.
All implementations have floating point instructions.
This change adds a Prog.To3 field analogous to Prog.To. It is used
by exclusive load/store instructions such as STLXR which read from
one register, and write to both a register and a memory address.
STLXRW R1, (R0), R3
This will store the word contained in R1 to the memory address
pointed by R0. R3 will be updated with the status result of the
store. It is used to implement atomic operations.
No other changes are made to the portable Prog and Addr structures.
Change-Id: Ie839029aa5265bbad35769d9689eca11e1c48c47
Reviewed-on: https://go-review.googlesource.com/7046
Reviewed-by: Russ Cox <rsc@golang.org>
Remove the per-achitecture formatter for Prog and replace it with
a global String method. Clean up and regularize the output. Update
tests affected by the format; some tests are made correct now when
they were broken before (and known to be).
Also, related: Change the encoding of the (R1+R2) syntax on ppc64
to be equivalent to (R1)(R2*1), which means it needs no special
handling.
Delete the now unused STRINGSZ constant.
Change-Id: I7f6654d11f80065f3914a3f19353f2f12edfe310
Reviewed-on: https://go-review.googlesource.com/6931
Reviewed-by: Russ Cox <rsc@golang.org>
Aconv is the pretty-printer for instruction opcodes like AMOVQ.
There was one for each architecture.
Make the space of A names have a different region for each architecture,
much as we did for the registers, so a single global Aconv function can
do the work. Each architecture registers its region as a slice of names
at a given offset.
The global names like CALL and JMP are now defined only once.
The A values are used for indexing tables, so make it easy to do the
indexing by making the offset maskable.
Remove a bunch of now-duplicated architecture-specific code.
Change-Id: Ib15647b7145a1c089e21e36543691a19e146b60e
Reviewed-on: https://go-review.googlesource.com/6620
Reviewed-by: Russ Cox <rsc@golang.org>
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Today it's only recorded for C, but the Go version of the linker will need it.
Change-Id: I0de56d98e8f3f1b7feb830458c0934af367fd29a
Reviewed-on: https://go-review.googlesource.com/6333
Reviewed-by: Rob Pike <r@golang.org>
Reviewed-by: Minux Ma <minux@golang.org>
This is a follow-up to CL 6265. No behavior changes.
The diff was generated with eg, using template:
package p
import "fmt"
func before(a string) string { return fmt.Sprintf(a) }
func after(a string) string { return a }
Change-Id: I7b3bebf31be5cd1ae2233da06cb4502a3d73f092
Reviewed-on: https://go-review.googlesource.com/6269
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
ARM operands for MOVM have lists of registers: [R1,R2,R5-R8].
Handle them cleanly.
It was TYPE_CONST with special handling, which meant operand printing
didn't work right and the special handling was ugly. Add a new TYPE_REGLIST
for this case and it all gets cleaner.
Change-Id: I4a64f70fb9765e63cb636619a7a8553611bfe970
Reviewed-on: https://go-review.googlesource.com/6300
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Clean up the obj API by making Rconv (register pretty printer) a top-level
function. This means that Dconv (operand pretty printer) doesn't need
an Rconv argument.
To do this, we make the register numbers, which are arbitrary inside an
operand (obj.Addr), disjoint sets for each architecture. Each architecture
registers (ha) a piece of the space and then the global Rconv knows which
architecture-specific printer to use.
Clean up all the code that uses Dconv.
Now register numbers are large, so a couple of fields in Addr need to go
from int8 to int16 because they sometimes hold register numbers. Clean
up their uses, which meant regenerating the yacc grammars for the
assemblers. There are changes in this CL triggered by earlier changes
to yacc, which had not been run in this directory.
There is still cleanup to do in Addr, but we're getting closer to that being
easy to do.
Change-Id: I9290ebee013b62f7d24e886743ea5a6b232990ab
Reviewed-on: https://go-review.googlesource.com/6220
Reviewed-by: Russ Cox <rsc@golang.org>
It was just missing, and apparently always was.
Change-Id: I84c057bb0ec72940201075f3e6078262fe4bce05
Reviewed-on: https://go-review.googlesource.com/6120
Reviewed-by: Russ Cox <rsc@golang.org>
Each architecture had its own Dconv (operand printer) but the syntax is
close to uniform and the code overlap was considerable. Consolidate these
into a single top-level function. A similar but smaller unification is done
for Mconv ("Name" formatter) as well.
The signature is changed. The flag was unused so drop it. Add a
function argument, Rconv, that must be supplied by the caller.
TODO: A future change will unify Rconv as well and this argument
will go away.
Some formats changed, because of the automatic consistency
created by unification. For instance, 0(R1) always prints as (R1)
now, and foo+0(SB) is just foo(SB). Before, some made these
simplifications and some didn't; now they all do.
Update the asm tests that depend on the format.
Change-Id: I6e3310bc19814c0c784ff0b960a154521acd9532
Reviewed-on: https://go-review.googlesource.com/5920
Reviewed-by: Russ Cox <rsc@golang.org>
First draft of converted Go compiler, using rsc.io/c2go rev 83d795a.
Change-Id: I29f4c7010de07d2ff1947bbca9865879d83c32c3
Reviewed-on: https://go-review.googlesource.com/4851
Reviewed-by: Rob Pike <r@golang.org>
cmd/internal/obj reconverted using rsc.io/c2go rev 2a95256.
- Brings in new, more regular Prog, Addr definitions
- Add Prog* argument to oclass in liblink/asm[68].c, for c2go conversion.
- Update objwriter for change in TEXT size encoding.
- Merge 5a, 6a, 8a, 9a changes into new5a, new6a, new8a, new9a (by hand).
- Add +build ignore to cmd/asm/internal/{addr,arch,asm}, cmd/asm.
They need to be updated for the changes.
- Reenable verifyAsm in cmd/go.
- Reenable GOOBJ=2 mode by default in liblink.
All architectures build successfully again.
Change-Id: I2c845c5d365aa484b570476898171bee657b626d
Reviewed-on: https://go-review.googlesource.com/3963
Reviewed-by: Rob Pike <r@golang.org>
cmd/internal/obj reconverted using rsc.io/c2go rev 40275b8.
All Prog*s need Ctxt field set so that the printer can tell
which architecture the Prog belongs to.
Use ctxt.NewProg consistently for this.
Change-Id: Ic981b3d68f24931ffae74a772e83a3dc2fdf518a
Reviewed-on: https://go-review.googlesource.com/3152
Reviewed-by: Rob Pike <r@golang.org>
Using rsc.io/c2go repo revision 60c9302.
- Export a few symbols needed by assemblers.
- Implement Getgoroot etc directly, and add Getgoversion.
- Removes dependency on Go 1.4 go/build.
- Change magic history name <no name> to <pop>
The <pop> change requires adjustment to the liblink serializer.
Change-Id: If5fb52ac9e91d50805263070b3fc5cc05d8b7632
Reviewed-on: https://go-review.googlesource.com/3141
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
This CL adds the real cmd/internal/obj packages.
Collectively they correspond to the liblink library.
The conversion was done using rsc.io/c2go's run script
at rsc.io/c2go repo version 706fac7.
This is not the final conversion, just the first working draft.
There will be more updates, but this works well enough
to use with go tool objwriter and pass all.bash.
Change-Id: I9359e835425f995a392bb2fcdbebf29511477bed
Reviewed-on: https://go-review.googlesource.com/3046
Reviewed-by: Ian Lance Taylor <iant@golang.org>
