This CL introduces types.NewBasic, for creating the predeclared
universal types, and reorganizes how the universe is initialized so
that all predeclared types are uniformly constructed.
There are now a bunch of Type fields that are no longer assigned
outside of the package, so this CL also introduces some new accessor
methods that a subsequent CL will mechanically introduce uses of.
Change-Id: Ie7996c3d5f1ca46cd5bfe45ecc91ebfa6a7b6c7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274435
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
The start of abstracting away Type fields. This adds a new constructor
for named types, styled after go/types.NewNamed. Along with helper
methods for SetNod and Pos, this allows hiding Nod.
Change-Id: Ica107034b6346c7b523bf6ae2a34009e350a9aa8
Reviewed-on: https://go-review.googlesource.com/c/go/+/274434
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Using statement nodes restricts the set of valid SetOp operations,
because you can't SetOp across representation. Rewrite various
code to avoid crossing those as-yet-unintroduced boundaries.
In particular, code like
x, y := v.(T)
x, y := f()
x, y := m[k]
x, y := <-c
starts out with Op = OAS2, and then it turns into a specific Op
OAS2DOTTYPE, OAS2FUNC, OAS2MAPR, OAS2RECV, and then
later in walk is lowered to an OAS2 again.
In the middle, the specific forms move the right-hand side from
n.Rlist().First() to n.Right(), and then the conversion to OAS2 moves
it back. This is unnecessary and makes it hard for these all to
share an underlying Node implementation.
This CL changes these specific forms to leave the right-hand side
in n.Rlist().First().
Similarly, OSELRECV2 is really just a temporary form of OAS2.
This CL changes it to use same fields too.
Finally, this CL fixes the printing of OAS2 nodes in ir/fmt.go,
which formerly printed n.Right() instead of n.Rlist().
This results in a (correct!) update to cmd/compile/internal/logopt's
expected output: ~R0 = <N> becomes ~R0 = &y.b.
Passes buildall w/ toolstash -cmp.
Change-Id: I164aa2e17dc55bfb292024de53d7d250192ad64a
Reviewed-on: https://go-review.googlesource.com/c/go/+/274105
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The type syntax is reused to stand in for the actual type once typechecked,
to avoid updating all the possible references to the original type syntax.
So all these implementations allow changing their Op from the raw syntax
like OTMAP to the finished form OTYPE, even though obviously the
representation does not change.
Passes buildall w/ toolstash -cmp.
Change-Id: I4acca1a5b35fa2f48ee08e8f1e5a330a004c284b
Reviewed-on: https://go-review.googlesource.com/c/go/+/274103
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Before this CL, an ONAME Node was represented by three structs
linked together: a node, a Name, and a Param. Previous CLs removed
OLABEL and OPACK from the set of nodes that knew about Name.
Now Name can be repurposed to *be* the ONAME Node implementation,
replacing three linked structs totaling 152+64+88 = 304 bytes (64-bit)
with a single 232-byte struct.
Many expressions in the code become simpler as well, without having
to use .Param. and sometimes even .Name().
(For a node n where n.Name() != nil, n.Name() == n.(*Name) now.)
Passes buildall w/ toolstash -cmp.
Change-Id: Ie719f1285c05623b9fd2faaa059e5b360a64b3be
Reviewed-on: https://go-review.googlesource.com/c/go/+/274094
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The pointer hack was nice and saved a word, but it's untenable
in a world where nodes are themselves interfaces with different
underlying types. Bite the bullet and use an interface to hold the
Node when in types.Sym and types.Type.
This has the nice benefit of removing AsTypesNode entirely.
AsNode is still useful because of its nil handling.
Change-Id: I298cba9ff788b956ee287283bec78010e8b601e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/272933
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If we want to break up package gc at all, we will need to move
the compiler IR it defines into a separate package that can be
imported by packages that gc itself imports. This CL does that.
It also removes the TINT8 etc aliases so that all code is clear
about which package things are coming from.
This CL is automatically generated by the script below.
See the comments in the script for details about the changes.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
# These names were never fully qualified
# when the types package was added.
# Do it now, to avoid confusion about where they live.
inline -rm \
Txxx \
TINT8 \
TUINT8 \
TINT16 \
TUINT16 \
TINT32 \
TUINT32 \
TINT64 \
TUINT64 \
TINT \
TUINT \
TUINTPTR \
TCOMPLEX64 \
TCOMPLEX128 \
TFLOAT32 \
TFLOAT64 \
TBOOL \
TPTR \
TFUNC \
TSLICE \
TARRAY \
TSTRUCT \
TCHAN \
TMAP \
TINTER \
TFORW \
TANY \
TSTRING \
TUNSAFEPTR \
TIDEAL \
TNIL \
TBLANK \
TFUNCARGS \
TCHANARGS \
NTYPE \
BADWIDTH
# esc.go and escape.go do not need to be split.
# Append esc.go onto the end of escape.go.
mv esc.go escape.go
# Pull out the type format installation from func Main,
# so it can be carried into package ir.
mv Main:/Sconv.=/-0,/TypeLinkSym/-1 InstallTypeFormats
# Names that need to be exported for use by code left in gc.
mv Isconst IsConst
mv asNode AsNode
mv asNodes AsNodes
mv asTypesNode AsTypesNode
mv basicnames BasicTypeNames
mv builtinpkg BuiltinPkg
mv consttype ConstType
mv dumplist DumpList
mv fdumplist FDumpList
mv fmtMode FmtMode
mv goopnames OpNames
mv inspect Inspect
mv inspectList InspectList
mv localpkg LocalPkg
mv nblank BlankNode
mv numImport NumImport
mv opprec OpPrec
mv origSym OrigSym
mv stmtwithinit StmtWithInit
mv dump DumpAny
mv fdump FDumpAny
mv nod Nod
mv nodl NodAt
mv newname NewName
mv newnamel NewNameAt
mv assertRepresents AssertValidTypeForConst
mv represents ValidTypeForConst
mv nodlit NewLiteral
# Types and fields that need to be exported for use by gc.
mv nowritebarrierrecCallSym SymAndPos
mv SymAndPos.lineno SymAndPos.Pos
mv SymAndPos.target SymAndPos.Sym
mv Func.lsym Func.LSym
mv Func.setWBPos Func.SetWBPos
mv Func.numReturns Func.NumReturns
mv Func.numDefers Func.NumDefers
mv Func.nwbrCalls Func.NWBRCalls
# initLSym is an algorithm left behind in gc,
# not an operation on Func itself.
mv Func.initLSym initLSym
mv nodeQueue NodeQueue
mv NodeQueue.empty NodeQueue.Empty
mv NodeQueue.popLeft NodeQueue.PopLeft
mv NodeQueue.pushRight NodeQueue.PushRight
# Many methods on Node are actually algorithms that
# would apply to any node implementation.
# Those become plain functions.
mv Node.funcname FuncName
mv Node.isBlank IsBlank
mv Node.isGoConst isGoConst
mv Node.isNil IsNil
mv Node.isParamHeapCopy isParamHeapCopy
mv Node.isParamStackCopy isParamStackCopy
mv Node.isSimpleName isSimpleName
mv Node.mayBeShared MayBeShared
mv Node.pkgFuncName PkgFuncName
mv Node.backingArrayPtrLen backingArrayPtrLen
mv Node.isterminating isTermNode
mv Node.labeledControl labeledControl
mv Nodes.isterminating isTermNodes
mv Nodes.sigerr fmtSignature
mv Node.MethodName methodExprName
mv Node.MethodFunc methodExprFunc
mv Node.IsMethod IsMethod
# Every node will need to implement RawCopy;
# Copy and SepCopy algorithms will use it.
mv Node.rawcopy Node.RawCopy
mv Node.copy Copy
mv Node.sepcopy SepCopy
# Extract Node.Format method body into func FmtNode,
# but leave method wrapper behind.
mv Node.Format:0,$ FmtNode
# Formatting helpers that will apply to all node implementations.
mv Node.Line Line
mv Node.exprfmt exprFmt
mv Node.jconv jconvFmt
mv Node.modeString modeString
mv Node.nconv nconvFmt
mv Node.nodedump nodeDumpFmt
mv Node.nodefmt nodeFmt
mv Node.stmtfmt stmtFmt
# Constant support needed for code moving to ir.
mv okforconst OKForConst
mv vconv FmtConst
mv int64Val Int64Val
mv float64Val Float64Val
mv Node.ValueInterface ConstValue
# Organize code into files.
mv LocalPkg BuiltinPkg ir.go
mv NumImport InstallTypeFormats Line fmt.go
mv syntax.go Nod NodAt NewNameAt Class Pxxx PragmaFlag Nointerface SymAndPos \
AsNode AsTypesNode BlankNode OrigSym \
Node.SliceBounds Node.SetSliceBounds Op.IsSlice3 \
IsConst Node.Int64Val Node.CanInt64 Node.Uint64Val Node.BoolVal Node.StringVal \
Node.RawCopy SepCopy Copy \
IsNil IsBlank IsMethod \
Node.Typ Node.StorageClass node.go
mv ConstType ConstValue Int64Val Float64Val AssertValidTypeForConst ValidTypeForConst NewLiteral idealType OKForConst val.go
# Move files to new ir package.
mv bitset.go class_string.go dump.go fmt.go \
ir.go node.go op_string.go val.go \
sizeof_test.go cmd/compile/internal/ir
'
: # fix mkbuiltin.go to generate the changes made to builtin.go during rf
sed -i '' '
s/\[T/[types.T/g
s/\*Node/*ir.Node/g
/internal\/types/c \
fmt.Fprintln(&b, `import (`) \
fmt.Fprintln(&b, ` "cmd/compile/internal/ir"`) \
fmt.Fprintln(&b, ` "cmd/compile/internal/types"`) \
fmt.Fprintln(&b, `)`)
' mkbuiltin.go
gofmt -w mkbuiltin.go
: # update cmd/dist to add internal/ir
cd ../../../dist
sed -i '' '/compile.internal.gc/a\
"cmd/compile/internal/ir",
' buildtool.go
gofmt -w buildtool.go
: # update cmd/compile TestFormats
cd ../..
go install std cmd
cd cmd/compile
go test -u || go test # first one updates but fails; second passes
Change-Id: I5f7caf6b20629b51970279e81231a3574d5b51db
Reviewed-on: https://go-review.googlesource.com/c/go/+/273008
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Move Flag, Debug, Ctxt, Exit, and error messages to
new package cmd/compile/internal/base.
These are the core functionality that everything in gc uses
and which otherwise prevent splitting any other code
out of gc into different packages.
A minor milestone: the compiler source code
no longer contains the string "yy".
[git-generate]
cd src/cmd/compile/internal/gc
rf '
mv atExit AtExit
mv Ctxt atExitFuncs AtExit Exit base.go
mv lineno Pos
mv linestr FmtPos
mv flusherrors FlushErrors
mv yyerror Errorf
mv yyerrorl ErrorfAt
mv yyerrorv ErrorfVers
mv noder.yyerrorpos noder.errorAt
mv Warnl WarnfAt
mv errorexit ErrorExit
mv base.go debug.go flag.go print.go cmd/compile/internal/base
'
: # update comments
sed -i '' 's/yyerrorl/ErrorfAt/g; s/yyerror/Errorf/g' *.go
: # bootstrap.go is not built by default so invisible to rf
sed -i '' 's/Fatalf/base.Fatalf/' bootstrap.go
goimports -w bootstrap.go
: # update cmd/dist to add internal/base
cd ../../../dist
sed -i '' '/internal.amd64/a\
"cmd/compile/internal/base",
' buildtool.go
gofmt -w buildtool.go
Change-Id: I59903c7084222d6eaee38823fd222159ba24a31a
Reviewed-on: https://go-review.googlesource.com/c/go/+/272250
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Properly speaking, "nil" is a zero value, not a constant. So
go/constant does not have a representation for it. To allow replacing
Val with constant.Value, we split out ONIL separately from OLITERAL so
we can get rid of CTNIL.
Passes toolstash-check.
Change-Id: I4c8e60cae3b3c91bbac43b3b0cf2a4ade028d6cb
Reviewed-on: https://go-review.googlesource.com/c/go/+/272650
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
These are almost always set, so might as well expect callers to
provide them. They're also all required by go/types's corresponding
New{Field,Func,Param,Var} functions, so this eases API compatibility.
Passes toolstash-check.
Change-Id: Ib3fa355d4961243cd285b41915e87652ae2c22f6
Reviewed-on: https://go-review.googlesource.com/c/go/+/272386
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
To be consistent with go/types.
Passes toolstash-check.
Change-Id: I5e02f529064a904310a164f8765082aa533cc799
Reviewed-on: https://go-review.googlesource.com/c/go/+/260699
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Renames variables sizeof_Array and other array_* variables
that were actually intended for slices and not arrays.
Change-Id: I391b95880cc77cabb8472efe694b7dd19545f31a
Reviewed-on: https://go-review.googlesource.com/c/go/+/180919
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Run-TryBot: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, we used a single "untyped number" type for all untyped
numeric constants. This led to vague error messages like "string(1.0)"
reporting that "1 (type untyped number)" can't be converted to string,
even though "string(1)" is valid.
This CL makes cmd/compile more like go/types by utilizing
types.Ideal{int,rune,float,complex} instead of types.Types[TIDEAL],
and keeping n.Type in sync with n.Val().Ctype() during constant
folding.
Thanks to K Heller for looking into this issue, and for the included
test case.
Fixes#21979.
Change-Id: Ibfea88c05704bc3c0a502a455d018a375589754d
Reviewed-on: https://go-review.googlesource.com/c/go/+/194019
Reviewed-by: Robert Griesemer <gri@golang.org>
Just the low-hanging fruit; code that was either never used, or its last
use was removed a while ago.
Change-Id: Ic7f90aeee3e6daf7edc16cde3c0a767d67e617ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/192618
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It was possible that
var X interface{} = 'x'
could cause a compilation failure due to having not calculated rune's
width yet. typecheck.go normally calculates the width of things, but
it doesn't for implicit conversions to default type. We already
compute the width of all of the standard numeric types in universe.go,
but we failed to calculate it for the rune alias type. So we could
later crash if the code never otherwise explicitly mentioned 'rune'.
While here, explicitly compute widths for 'byte' and 'error' for
consistency.
Fixes#29350.
Change-Id: Ifedd4899527c983ee5258dcf75aaf635b6f812f8
Reviewed-on: https://go-review.googlesource.com/c/155380
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
This change does a bulk rename of several identifiers in the compiler.
See #27167 and https://docs.google.com/document/d/19_ExiylD9MRfeAjKIfEsMU1_RGhuxB9sA0b5Zv7byVI/
for context and for discussion of these particular renames.
Commands run to generate this change:
gorename -from '"cmd/compile/internal/gc".OPROC' -to OGO
gorename -from '"cmd/compile/internal/gc".OCOM' -to OBITNOT
gorename -from '"cmd/compile/internal/gc".OMINUS' -to ONEG
gorename -from '"cmd/compile/internal/gc".OIND' -to ODEREF
gorename -from '"cmd/compile/internal/gc".OARRAYBYTESTR' -to OBYTES2STR
gorename -from '"cmd/compile/internal/gc".OARRAYBYTESTRTMP' -to OBYTES2STRTMP
gorename -from '"cmd/compile/internal/gc".OARRAYRUNESTR' -to ORUNES2STR
gorename -from '"cmd/compile/internal/gc".OSTRARRAYBYTE' -to OSTR2BYTES
gorename -from '"cmd/compile/internal/gc".OSTRARRAYBYTETMP' -to OSTR2BYTESTMP
gorename -from '"cmd/compile/internal/gc".OSTRARRAYRUNE' -to OSTR2RUNES
gorename -from '"cmd/compile/internal/gc".Etop' -to ctxStmt
gorename -from '"cmd/compile/internal/gc".Erv' -to ctxExpr
gorename -from '"cmd/compile/internal/gc".Ecall' -to ctxCallee
gorename -from '"cmd/compile/internal/gc".Efnstruct' -to ctxMultiOK
gorename -from '"cmd/compile/internal/gc".Easgn' -to ctxAssign
gorename -from '"cmd/compile/internal/gc".Ecomplit' -to ctxCompLit
Not altered: parameters and local variables (mostly in typecheck.go) named top,
which should probably now be called ctx (and which should probably have a named type).
Also not altered: Field called Top in gc.Func.
gorename -from '"cmd/compile/internal/gc".Node.Isddd' -to IsDDD
gorename -from '"cmd/compile/internal/gc".Node.SetIsddd' -to SetIsDDD
gorename -from '"cmd/compile/internal/gc".nodeIsddd' -to nodeIsDDD
gorename -from '"cmd/compile/internal/types".Field.Isddd' -to IsDDD
gorename -from '"cmd/compile/internal/types".Field.SetIsddd' -to SetIsDDD
gorename -from '"cmd/compile/internal/types".fieldIsddd' -to fieldIsDDD
Not altered: function gc.hasddd, params and local variables called isddd
Also not altered: fmt.go prints nodes using "isddd(%v)".
cd cmd/compile/internal/gc; go generate
I then manually found impacted comments using exact string match
and fixed them up by hand. The comment changes were trivial.
Passes toolstash-check.
Fixes#27167. If this experiment is deemed a success,
we will open a new tracking issue for renames to do
at the end of the 1.13 cycles.
Change-Id: I2dc541533d2ab0d06cb3d31d65df205ecfb151e8
Reviewed-on: https://go-review.googlesource.com/c/150140
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Was only ever filled with one Etype (TFORW) and only used
in one place. Easier to just check for TFORW.
Change-Id: Icc96da3a22b0af1d7e60bc5841c744916c53341e
Reviewed-on: https://go-review.googlesource.com/c/147285
Reviewed-by: Martin Möhrmann <moehrmann@google.com>
Add helper methods that validate n.Op and convert to/from the
appropriate type.
Notably, there was a lot of code in walk.go that thought setting
Etype=1 on an OADDR node affected escape analysis.
Passes toolstash-check.
TBR=marvin
Change-Id: Ieae7c67225c1459c9719f9e6a748a25b975cf758
Reviewed-on: https://go-review.googlesource.com/99535
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Instead of creating a new &nodfp expression for every recover() call,
or a new nodpc variable for every function instrumented by the race
detector, this CL introduces two new uintptr-typed pseudo-variables
callerSP and callerPC. These pseudo-variables act just like calls to
the runtime's getcallersp() and getcallerpc() functions.
For consistency, change runtime.gorecover's builtin stub's parameter
type from "*int32" to "uintptr".
Passes toolstash-check, but toolstash-check -race fails because of
register allocator changes.
Change-Id: I985d644653de2dac8b7b03a28829ad04dfd4f358
Reviewed-on: https://go-review.googlesource.com/99416
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Otherwise, the error can be confusing if one forgets or doesn't know
that the builtin is being shadowed, which is not common practice.
Fixes#22822.
Change-Id: I735393b5ce28cb83815a1c3f7cd2e7bb5080a32d
Reviewed-on: https://go-review.googlesource.com/97455
Reviewed-by: Robert Griesemer <gri@golang.org>
There shouldn't be any problems setting error's "Orig" (underlying)
type to a separate anonymous interface, as this is already how
go/types defines it.
Change-Id: I44e9c4048ffe362ce329e8306632e38b5ccfecff
Reviewed-on: https://go-review.googlesource.com/61790
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Alan Donovan <adonovan@google.com>
Node.Used was written to from the backend
concurrently with reads of Node.Class
for the same ONAME Nodes.
I do not know why it was not failing consistently
under the race detector, but it is a race.
This is likely also a problem with Node.HasVal and Node.HasOpt.
They will be handled in a separate CL.
Fix Used by moving it to gc.Name and making it a separate bool.
There was one non-Name use of Used, marking OLABELs as used.
That is no longer needed, now that goto and label checking
happens early in the front end.
Leave the getters and setters in place,
to ease changing the representation in the future
(or changing to an interface!).
Updates #20144
Change-Id: I9bec7c6d33dcb129a4cfa9d338462ea33087f9f7
Reviewed-on: https://go-review.googlesource.com/42015
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
isifacemethod accessed thisT without checking if it was initialized,
opening the possibility for a bug during type checking. Give better
name, move it to package types, and provide accessor instead.
Change-Id: I29ffc408252a4ba4ef1de218fa154397786c9be6
Reviewed-on: https://go-review.googlesource.com/41673
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
- created new package cmd/compile/internal/types
- moved Pkg, Sym, Type to new package
- to break cycles, for now we need the (ugly) types/utils.go
file which contains a handful of functions that must be installed
early by the gc frontend
- to break cycles, for now we need two functions to convert between
*gc.Node and *types.Node (the latter is a dummy type)
- adjusted the gc's code to use the new package and the conversion
functions as needed
- made several Pkg, Sym, and Type methods functions as needed
- renamed constructors typ, typPtr, typArray, etc. to types.New,
types.NewPtr, types.NewArray, etc.
Passes toolstash-check -all.
Change-Id: I8adfa5e85c731645d0a7fd2030375ed6ebf54b72
Reviewed-on: https://go-review.googlesource.com/39855
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
nodfp is a global, so modifying it is unsafe in a concurrent backend.
It is also not necessary, since the Used marks
are only relevant for nodes in fn.Dcl.
For good measure, mark nodfp as always used.
Passes toolstash-check.
Updates #15756
Change-Id: I5320459f5eced2898615a17b395a10c1064bcaf5
Reviewed-on: https://go-review.googlesource.com/39200
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Remove one of the many lookup variants.
Change-Id: I4095aa030da4227540badd6724bbf50b728fbe93
Reviewed-on: https://go-review.googlesource.com/38990
Reviewed-by: Dave Cheney <dave@cheney.net>
Previously the compiler rewrote constant division into OHMUL
operations, but that rewriting was moved to SSA in CL 37015. Now OHMUL
is unused, so we can get rid of it.
Change-Id: Ib6fc7c2b6435510bafb5735b3b4f42cfd8ed8cdb
Reviewed-on: https://go-review.googlesource.com/37750
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
mkbuiltin.go now generates builtin.go using go/ast instead of running
the compiler, so we don't need the -A flag anymore.
Passes toolstash -cmp.
Change-Id: Ifa70f4f3c9feae10c723cbec81a0a47c39610090
Reviewed-on: https://go-review.googlesource.com/31497
Reviewed-by: Robert Griesemer <gri@golang.org>
Reuse the same mechanisms for handling universal builtins like len to
handle unsafe.Sizeof, etc. Allows us to drop package unsafe's export
data, and simplifies some code.
Updates #17508.
Change-Id: I620e0617c24e57e8a2d7cccd0e2de34608779656
Reviewed-on: https://go-review.googlesource.com/31433
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Follow up to CL 29134. Generated with gofmt -r 'Nod -> nod', plus
three manual adjustments to the comments in syntax/parser.go
Change-Id: I02920f7ab10c70b6e850457b42d5fe35f1f3821a
Reviewed-on: https://go-review.googlesource.com/29136
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
After the removal of the old backend many types are no longer referenced
outside internal/gc. Make these functions private so that tools like
honnef.co/go/unused can spot when they become dead code. In doing so
this CL identified several previously public helpers which are no longer
used, so removes them.
This should be the last of the public functions.
Change-Id: I7e9c4e72f86f391b428b9dddb6f0d516529706c3
Reviewed-on: https://go-review.googlesource.com/29134
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We already explicitly construct the "unsafe.Pointer" type in typeinit
because we need it for Types[TUNSAFEPTR]. No point in also having it
in builtin/unsafe.go if it just means (*importer).importtype needs to
fix it.
Change-Id: Ife8a5a73cbbe2bfcabe8b25ee4f7e0f5fd0570b4
Reviewed-on: https://go-review.googlesource.com/29082
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
These were a hack abstraction for before FuncType existed.
The result value from calling FuncType() could be saved, but this
maintains the current idiom of consistently using t.FuncType().foo
everywhere in case we choose to evolve the API further.
Change-Id: I81f19aaeab6fb7caa2d4da8bf0bbbc358ab970d0
Reviewed-on: https://go-review.googlesource.com/28150
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The main check here is that liveness now crashes if it finds an instruction
using a variable that should be tracked but is not.
Comments and adjustments in nodarg to explain what's going on and
to remove the "-1" argument added a few months ago, plus a sketch
of a future simplification.
The need for n.Orig in the earlier CL seems to have been an intermediate
problem rather than fundamental: the new explanations in nodarg make
clear that nodarg is not causing the problem I thought, and in fact now
using n instead of n.Orig works fine in plive.go.
Change-Id: I3f5cf9f6e4438a6d27abac7d490e7521545cd552
Reviewed-on: https://go-review.googlesource.com/23450
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
