Move a lot of the constant folding rules to use strongly
typed AuxInt fields.
We need more than a cast to convert AuxInt to, e.g., float32.
Make conversion functions for converting back and forth.
Change-Id: Ia3d95ee3583ee2179a10938e20210a7617358c88
Reviewed-on: https://go-review.googlesource.com/c/go/+/227866
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
For 1.15, unless someone really wants it in 1.14.
A performance-sensitive user thought this would be useful,
though "large" was not well-defined. If 128 is large,
there are 139 static instances of "large" copies in the compiler
itself.
Includes test.
Change-Id: I81f20c62da59d37072429f3a22c1809e6fb2946d
Reviewed-on: https://go-review.googlesource.com/c/go/+/205066
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
zeroUpper32Bits wasn't checking for shift-extension ops. This would not
check shifts that were marking as bounded by prove (normally, shifts
are wrapped in a sequence that ends with an ANDL, and zeroUpper32Bits
would see the ANDL).
This produces no changes on generated output right now, but will be
important once CL196679 lands because many shifts will be marked
as bounded, and lower will stop generating the masking code sequence
around them.
Change-Id: Iaea94acc5b60bb9a5021c9fb7e4a1e2e5244435e
Reviewed-on: https://go-review.googlesource.com/c/go/+/226338
Reviewed-by: Keith Randall <khr@golang.org>
Make sure we don't use the rewrite ptr + (c + x) -> c + (ptr + x), as
that may create an ephemeral out-of-bounds pointer.
I have not seen an actual bug caused by this yet, but we've seen
them in the 386 port so I'm fixing this issue for amd64 as well.
The load-combining rules needed to be reworked somewhat to still
work without the above broken rule.
Update #37881
Change-Id: I8046d170e89e2035195f261535e34ca7d8aca68a
Reviewed-on: https://go-review.googlesource.com/c/go/+/226437
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Retrying CL 222782, with a fix that will hopefully stop the random crashing.
The issue with the previous CL is that it does pointer arithmetic
in a way that may briefly generate an out-of-bounds pointer. If an
interrupt happens to occur in that state, the referenced object may
be collected incorrectly.
Suppose there was code that did s[x+c]. The previous CL had a rule
to the effect of ptr + (x + c) -> c + (ptr + x). But ptr+x is not
guaranteed to point to the same object as ptr. In contrast,
ptr+(x+c) is guaranteed to point to the same object as ptr, because
we would have already checked that x+c is in bounds.
For example, strconv.trim used to have this code:
MOVZX -0x1(BX)(DX*1), BP
CMPL $0x30, AL
After CL 222782, it had this code:
LEAL 0(BX)(DX*1), BP
CMPB $0x30, -0x1(BP)
An interrupt between those last two instructions could see BP pointing
outside the backing store of the slice involved.
It's really hard to actually demonstrate a bug. First, you need to
have an interrupt occur at exactly the right time. Then, there must
be no other pointers to the object in question. Since the interrupted
frame will be scanned conservatively, there can't even be a dead
pointer in another register or on the stack. (In the example above,
a bug can't happen because BX still holds the original pointer.)
Then, the object in question needs to be collected (or at least
scanned?) before the interrupted code continues.
This CL needs to handle load combining somewhat differently than CL 222782
because of the new restriction on arithmetic. That's the only real
difference (other than removing the bad rules) from that old CL.
This bug is also present in the amd64 rewrite rules, and we haven't
seen any crashing as a result. I will fix up that code similarly to
this one in a separate CL.
Update #37881
Change-Id: I5f0d584d9bef4696bfe89a61ef0a27c8d507329f
Reviewed-on: https://go-review.googlesource.com/c/go/+/225798
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Use a separate compiler pass to introduce complicated x86 addressing
modes. Loads in the normal architecture rules (for x86 and all other
platforms) can have constant offsets (AuxInt values) and symbols (Aux
values), but no more.
The complex addressing modes (x+y, x+2*y, etc.) are introduced in a
separate pass that combines loads with LEAQx ops.
Organizing rewrites this way simplifies the number of rewrites
required, as there are lots of different rule orderings that have to
be specified to ensure these complex addressing modes are always found
if they are possible.
Update #36468
Change-Id: I5b4bf7b03a1e731d6dfeb9ef19b376175f3b4b44
Reviewed-on: https://go-review.googlesource.com/c/go/+/217097
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Trying this CL again, with a fixed test that allows platforms
to disagree on the exact behavior of converting NaNs.
We store 32-bit floating point constants in a 64-bit field, by
converting that 32-bit float to 64-bit float to store it, and convert
it back to use it.
That works for *almost* all floating-point constants. The exception is
signaling NaNs. The round trip described above means we can't represent
a 32-bit signaling NaN, because conversions strip the signaling bit.
To fix this issue, just forbid NaNs as floating-point constants in SSA
form. This shouldn't affect any real-world code, as people seldom
constant-propagate NaNs (except in test code).
Additionally, NaNs are somewhat underspecified (which of the many NaNs
do you get when dividing 0/0?), so when cross-compiling there's a
danger of using the compiler machine's NaN regime for some math, and
the target machine's NaN regime for other math. Better to use the
target machine's NaN regime always.
Update #36400
Change-Id: Idf203b688a15abceabbd66ba290d4e9f63619ecb
Reviewed-on: https://go-review.googlesource.com/c/go/+/221790
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The SSA backend has rules to read the contents of readonly Lsyms.
However, this rule was failing to trigger for many readonly Lsyms.
This is because the readonly attribute that was set on the Node.Name
was not propagated to its Lsym until the dump globals phase, after SSA runs.
To work around this phase ordering problem, introduce Node.SetReadonly,
which sets Node.Name.Readonly and also configures the Lsym
enough that SSA can use it.
This change also fixes a latent problem in the rewrite rule function,
namely that reads past the end of lsym.P were treated as entirely zero,
instead of merely requiring padding with trailing zeros.
This change also adds an amd64 rule needed to fully optimize
the results of this change. It would be better not to need this,
but the zero extension that should handle this for us
gets optimized away too soon (see #36897 for a similar problem).
I have not investigated whether other platforms also need new
rules to take full advantage of the new optimizations.
Compiled code for (interface{})(true) on amd64 goes from:
LEAQ type.bool(SB), AX
MOVBLZX ""..stmp_0(SB), BX
LEAQ runtime.staticbytes(SB), CX
ADDQ CX, BX
to
LEAQ type.bool(SB), AX
LEAQ runtime.staticbytes+1(SB), BX
Prior to this change, the readonly symbol rewrite rules
fired a total of 884 times during make.bash.
Afterwards they fire 1807 times.
file before after Δ %
cgo 4827832 4823736 -4096 -0.085%
compile 24907768 24895656 -12112 -0.049%
fix 3376952 3368760 -8192 -0.243%
pprof 14751700 14747604 -4096 -0.028%
total 120343528 120315032 -28496 -0.024%
Change-Id: I59ea52138276c37840f69e30fb109fd376d579ec
Reviewed-on: https://go-review.googlesource.com/c/go/+/220499
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
There are often many values to clobber.
Allow passing them all in at once.
The goal is increased rule readability.
As a bonus, it shrinks cmd/compile by ~97k, almost half a percent.
Package SSA requires 1.2% less memory to compile.
The single-line changes were make via regex,
and the remaining multi-line clobbers were manually combined.
Passes toolstash-check -all.
Change-Id: Ib310e9265d3616211f8192c9040b4c8933824d19
Reviewed-on: https://go-review.googlesource.com/c/go/+/220691
Reviewed-by: Michael Munday <mike.munday@ibm.com>
This reverts CL 213477.
Reason for revert: tests are failing on linux-mips*-rtrk builders.
Change-Id: I8168f7450890233f1bd7e53930b73693c26d4dc0
Reviewed-on: https://go-review.googlesource.com/c/go/+/220897
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We store 32-bit floating point constants in a 64-bit field, by
converting that 32-bit float to 64-bit float to store it, and convert
it back to use it.
That works for *almost* all floating-point constants. The exception is
signaling NaNs. The round trip described above means we can't represent
a 32-bit signaling NaN, because conversions strip the signaling bit.
To fix this issue, just forbid NaNs as floating-point constants in SSA
form. This shouldn't affect any real-world code, as people seldom
constant-propagate NaNs (except in test code).
Additionally, NaNs are somewhat underspecified (which of the many NaNs
do you get when dividing 0/0?), so when cross-compiling there's a
danger of using the compiler machine's NaN regime for some math, and
the target machine's NaN regime for other math. Better to use the
target machine's NaN regime always.
This has been a bug since 1.10, and there's an easy workaround
(declare a global varaible containing the signaling NaN pattern, and
use that as the argument to math.Float32frombits) so we'll fix it in
1.15.
Fixes#36400
Update #36399
Change-Id: Icf155e743281560eda2eed953d19a829552ccfda
Reviewed-on: https://go-review.googlesource.com/c/go/+/213477
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
The name of the function should mention division.
Eliminate double negatives from the comment describing it.
Change-Id: Icef1a5139b3a91b86acb930af97938f5160f7342
Reviewed-on: https://go-review.googlesource.com/c/go/+/217001
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Part 1: CL 199499 (GOOS nacl)
Part 2: CL 200077 (amd64p32 files, toolchain)
Part 3: stuff that arguably should've been part of Part 2, but I forgot
one of my grep patterns when splitting the original CL up into
two parts.
This one might also have interesting stuff to resurrect for any future
x32 ABI support.
Updates #30439
Change-Id: I2b4143374a253a003666f3c69e776b7e456bdb9c
Reviewed-on: https://go-review.googlesource.com/c/go/+/200318
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Just the low-hanging fruit; code that was either never used, or its last
use was removed a while ago.
Change-Id: Ic7f90aeee3e6daf7edc16cde3c0a767d67e617ee
Reviewed-on: https://go-review.googlesource.com/c/go/+/192618
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This reduces allocations and also resolves some
lurking inliner/inlinee line-number match problems.
However, it does add about 1.5% to compile time.
This fixes compiler OOMs seen compiling some large protobuf-
derived inputs. For compiling the compiler itself,
compilebench -pkg cmd/compile/internal/ssa -memprofile withcl.prof
the numberlines-related memory consumption is reduced from 129MB
to 29MB (about a 5% overall reduction in allocation).
Additionally modified after going over changes with Austin
to remove unused code (nobody called size()) and correct
the cache-clearing code.
I've attempted to speed this up by not using maps, and have
not succeeded. I'd rather get correct code in now, speed it
up later if I can.
Updates #27739.
Fixes#29279.
Change-Id: I098005de4e45196a5f5b10c0886a49f88e9f8fd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/154617
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When the SSA rules are re-generated to log rules,
they write output like:
rewrite AMD64.rules:527
rewrite AMD64.rules:427
rewrite AMD64.rules:494
This is silly; there are no non-rewrite lines in the file.
Furthermore, the rulelog file tends to be gigantic
for any non-trivial compilation (measured in gigabytes).
Remove the "rewrite " prefix.
No impact to normal builds.
Change-Id: I955995c1cc5f27a4a6a3849e19082ecb3e40bd4f
Reviewed-on: https://go-review.googlesource.com/c/go/+/176677
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
noteRule is useful when you're trying to debug
a particular rule, or get a general sense for
how often a rule fires overall.
It is less useful if you're trying to figure
out which functions might be useful to benchmark
to ascertain the impact of a newly added rule.
Enter countRule. You use it like noteRule,
except that you get per-function summaries.
Sample output:
# runtime
(*mspan).sweep: idx1=1
evacuate_faststr: idx1=1
evacuate_fast32: idx1=1
evacuate: idx1=2
evacuate_fast64: idx1=1
sweepone: idx1=1
purgecachedstats: idx1=1
mProf_Free: idx1=1
This suggests that the map benchmarks
might be good to run for this added rule.
Change-Id: Id471c3231f1736165f2020f6979ff01c29677808
Reviewed-on: https://go-review.googlesource.com/c/go/+/167088
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
"Division by invariant integers using multiplication" paper
by Granlund and Montgomery contains a method for directly computing
divisibility (x%c == 0 for c constant) by means of the modular inverse.
The method is further elaborated in "Hacker's Delight" by Warren Section 10-17
This general rule can compute divisibilty by one multiplication and a compare
for odd divisors and an additional rotate for even divisors.
To apply the divisibility rule, we must take into account
the rules to rewrite x%c = x-((x/c)*c) and (x/c) for c constant on the first
optimization pass "opt". This complicates the matching as we want to match
only in the cases where the result of (x/c) is not also available.
So, we must match on the expanded form of (x/c) in the expression x == c*(x/c)
in the "late opt" pass after common subexpresion elimination.
Note, that if there is an intermediate opt pass introduced in the future we
could simplify these rules by delaying the magic division rewrite to "late opt"
and matching directly on (x/c) in the intermediate opt pass.
Additional rules to lower the generic RotateLeft* ops were also applied.
On amd64, the divisibility check is 25-50% faster.
name old time/op new time/op delta
DivconstI64-4 2.08ns ± 0% 2.08ns ± 1% ~ (p=0.881 n=5+5)
DivisibleconstI64-4 2.67ns ± 0% 2.67ns ± 1% ~ (p=1.000 n=5+5)
DivisibleWDivconstI64-4 2.67ns ± 0% 2.67ns ± 0% ~ (p=0.683 n=5+5)
DivconstU64-4 2.08ns ± 1% 2.08ns ± 1% ~ (p=1.000 n=5+5)
DivisibleconstU64-4 2.77ns ± 1% 1.55ns ± 2% -43.90% (p=0.008 n=5+5)
DivisibleWDivconstU64-4 2.99ns ± 1% 2.99ns ± 1% ~ (p=1.000 n=5+5)
DivconstI32-4 1.53ns ± 2% 1.53ns ± 0% ~ (p=1.000 n=5+5)
DivisibleconstI32-4 2.23ns ± 0% 2.25ns ± 3% ~ (p=0.167 n=5+5)
DivisibleWDivconstI32-4 2.27ns ± 1% 2.27ns ± 1% ~ (p=0.429 n=5+5)
DivconstU32-4 1.78ns ± 0% 1.78ns ± 1% ~ (p=1.000 n=4+5)
DivisibleconstU32-4 2.52ns ± 2% 1.26ns ± 0% -49.96% (p=0.000 n=5+4)
DivisibleWDivconstU32-4 2.63ns ± 0% 2.85ns ±10% +8.29% (p=0.016 n=4+5)
DivconstI16-4 1.54ns ± 0% 1.54ns ± 0% ~ (p=0.333 n=4+5)
DivisibleconstI16-4 2.10ns ± 0% 2.10ns ± 1% ~ (p=0.571 n=4+5)
DivisibleWDivconstI16-4 2.22ns ± 0% 2.23ns ± 1% ~ (p=0.556 n=4+5)
DivconstU16-4 1.09ns ± 0% 1.01ns ± 1% -7.74% (p=0.000 n=4+5)
DivisibleconstU16-4 1.83ns ± 0% 1.26ns ± 0% -31.52% (p=0.008 n=5+5)
DivisibleWDivconstU16-4 1.88ns ± 0% 1.89ns ± 1% ~ (p=0.365 n=5+5)
DivconstI8-4 1.54ns ± 1% 1.54ns ± 1% ~ (p=1.000 n=5+5)
DivisibleconstI8-4 2.10ns ± 0% 2.11ns ± 0% ~ (p=0.238 n=5+4)
DivisibleWDivconstI8-4 2.22ns ± 0% 2.23ns ± 2% ~ (p=0.762 n=5+5)
DivconstU8-4 0.92ns ± 1% 0.94ns ± 1% +2.65% (p=0.008 n=5+5)
DivisibleconstU8-4 1.66ns ± 0% 1.26ns ± 1% -24.28% (p=0.008 n=5+5)
DivisibleWDivconstU8-4 1.79ns ± 0% 1.80ns ± 1% ~ (p=0.079 n=4+5)
A follow-up change will address the signed division case.
Updates #30282
Change-Id: I7e995f167179aa5c76bb10fbcbeb49c520943403
Reviewed-on: https://go-review.googlesource.com/c/go/+/168037
Run-TryBot: Brian Kessler <brian.m.kessler@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
These new calls should not prevent NOSPLIT promotion, like the old ones.
These new calls should not prevent racefuncenter/exit removal.
(The latter was already true, as the new calls are not yet lowered
to StaticCalls at the point where racefuncenter/exit removal is done.)
Add tests to make sure we don't regress (again).
Fixes#31219
Change-Id: I3fb6b17cdd32c425829f1e2498defa813a5a9ace
Reviewed-on: https://go-review.googlesource.com/c/go/+/170639
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
The CL 164718 adds new condition flags for floating-point comparisons
in arm64 backend, but dose not add the handling in rewrite.go for
corresponding Ops, which causes issue 30679. And this CL fixes this
issue.
Fixes#30679
Change-Id: I8acc749f78227c3e9e74fa7938f05fb442fb62c6
Reviewed-on: https://go-review.googlesource.com/c/go/+/166579
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This CL adds two rules to turn patterns like ((x<<8) | (x>>8)) (the type of
x is uint16, "|" can also be "+" or "^") to a REV16 instruction on arm v6+.
This optimization rule can be used for math/bits.ReverseBytes16.
Benchmarks on arm v6:
name old time/op new time/op delta
ReverseBytes-32 2.86ns ± 0% 2.86ns ± 0% ~ (all equal)
ReverseBytes16-32 2.86ns ± 0% 2.86ns ± 0% ~ (all equal)
ReverseBytes32-32 1.29ns ± 0% 1.29ns ± 0% ~ (all equal)
ReverseBytes64-32 1.43ns ± 0% 1.43ns ± 0% ~ (all equal)
Change-Id: I819e633c9a9d308f8e476fb0c82d73fb73dd019f
Reviewed-on: https://go-review.googlesource.com/c/go/+/159019
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
CL 154057 adds guards agaist out-of-bound reads from readonly
constants. It turns out that in dead code, the offset can also
be negative. Guard against negative offset as well.
Fixes#30257.
Change-Id: I47c2a2e434dd466c08ae6f50f213999a358c796e
Reviewed-on: https://go-review.googlesource.com/c/162819
Reviewed-by: Keith Randall <khr@golang.org>
Allow shifts by signed amounts. Panic if the shift amount is negative.
TODO: We end up doing two compares per shift, see Ian's comment
https://github.com/golang/go/issues/19113#issuecomment-443241799 that
we could do it with a single comparison in the normal case.
The prove pass mostly handles this code well. For instance, it removes the
<0 check for cases like this:
if s >= 0 { _ = x << s }
_ = x << len(a)
This case isn't handled well yet:
_ = x << (y & 0xf)
I'll do followon CLs for unhandled cases as needed.
Update #19113
R=go1.13
Change-Id: I839a5933d94b54ab04deb9dd5149f32c51c90fa1
Reviewed-on: https://go-review.googlesource.com/c/158719
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
We can't remove race instrumentation unless there are no calls,
not just no static calls. Closure and interface calls also count.
The problem in issue 29329 is that there was a racefuncenter, an
InterCall, and a racefuncexit. The racefuncenter was removed, then
the InterCall was rewritten to a StaticCall. That prevented the
racefuncexit from being removed. That caused an imbalance in
racefuncenter/racefuncexit calls, which made the race detector barf.
Bug introduced at CL 121235
Fixes#29329
Change-Id: I2c94ac6cf918dd910b74b2a0de5dc2480d236f16
Reviewed-on: https://go-review.googlesource.com/c/155917
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Out-of-bounds reads of globals can happen in dead code. For code
like this:
s := "a"
if len(s) == 3 {
load s[0], s[1], and s[2]
}
The out-of-bounds loads are dead code, but aren't removed yet
when lowering. We need to not panic when compile-time evaluating
those loads. This can only happen for dead code, so the result
doesn't matter.
Fixes#29215
Change-Id: I7fb765766328b9524c6f2a1e6ab8d8edd9875097
Reviewed-on: https://go-review.googlesource.com/c/154057
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Alberto Donizetti <alb.donizetti@gmail.com>
By combining the load+op, we may force the op to happen earlier in
the store chain. That might force the SymAddr operation earlier, and
in particular earlier than its corresponding VarDef. That leads to
an invalid schedule, so avoid that.
This is kind of a hack to work around the issue presented. I think
the underlying problem, that LEAQ is not directly ordered with respect
to its vardef, is the real problem. The benefit of this CL is that
it fixes the immediate issue, is small, and obviously won't break
anything. A real fix for this issue is much more invasive.
The go binary is unchanged in size.
This situation just doesn't occur very often.
Fixes#28445
Change-Id: I13a765e13f075d5b6808a355ef3c43cdd7cd47b6
Reviewed-on: https://go-review.googlesource.com/c/153641
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This optimization is not sound if A, B, or C
might overlap with each other.
Thanks to Michael Munday for pointing this
out during the review of CL 143479.
This reduces the number of times this optimization
triggers during make.bash from 386 to 74.
This is unfortunate, but I don't see an obvious way around it,
short of souping up the disjointness analysis.
name old object-bytes new object-bytes delta
Template 507kB ± 0% 507kB ± 0% +0.13% (p=0.008 n=5+5)
Unicode 225kB ± 0% 225kB ± 0% ~ (all equal)
GoTypes 1.85MB ± 0% 1.85MB ± 0% +0.02% (p=0.008 n=5+5)
Flate 328kB ± 0% 328kB ± 0% ~ (all equal)
GoParser 402kB ± 0% 402kB ± 0% ~ (all equal)
Reflect 1.41MB ± 0% 1.41MB ± 0% ~ (all equal)
Tar 457kB ± 0% 458kB ± 0% +0.20% (p=0.008 n=5+5)
XML 600kB ± 0% 601kB ± 0% +0.03% (p=0.008 n=5+5)
Change-Id: Ida408cb627145ba9faf473a78606f050c2f3f51c
Reviewed-on: https://go-review.googlesource.com/c/145208
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
We collapse OpOffPtrs during generic rewrites.
However, we also use disjoint at the same time.
Instead of waiting for all OpOffPtrs to be collapsed
before the disjointness rules can kick in,
burrow through all OpOffPtrs immediately.
Change-Id: I60d0a70a9b4605b1817db7c4aab0c0d789651c90
Reviewed-on: https://go-review.googlesource.com/c/145206
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Reviewed-by: Keith Randall <khr@golang.org>
Go documentation style for boolean funcs is to say:
// Foo reports whether ...
func Foo() bool
(rather than "returns true if")
This CL also replaces 4 uses of "iff" with the same "reports whether"
wording, which doesn't lose any meaning, and will prevent people from
sending typo fixes when they don't realize it's "if and only if". In
the past I think we've had the typo CLs updated to just say "reports
whether". So do them all at once.
(Inspired by the addition of another "returns true if" in CL 146938
in fd_plan9.go)
Created with:
$ perl -i -npe 's/returns true if/reports whether/' $(git grep -l "returns true iff" | grep -v vendor)
$ perl -i -npe 's/returns true if/reports whether/' $(git grep -l "returns true if" | grep -v vendor)
Change-Id: Ided502237f5ab0d25cb625dbab12529c361a8b9f
Reviewed-on: https://go-review.googlesource.com/c/147037
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Unlike normal load+op opcodes, the load+compare opcode does
not clobber its non-load argument. Allow the load+compare merge
to happen even if the non-load argument is used elsewhere.
Noticed when investigating issue #28417.
Change-Id: Ibc48d1f2e06ae76034c59f453815d263e8ec7288
Reviewed-on: https://go-review.googlesource.com/c/145097
Reviewed-by: Ainar Garipov <gugl.zadolbal@gmail.com>
Reviewed-by: Ben Shi <powerman1st@163.com>
prove is able to find 94 occurrences in std cmd where a divisor
can't have the value -1. The change removes
the extraneous fix-up code for these cases.
Fixes#25239
Change-Id: Ic184de971f47cc57c702eb72805b8e291c14035d
Reviewed-on: https://go-review.googlesource.com/c/130215
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Instead of
MOVB go.string."foo"(SB), AX
do
MOVB $102, AX
When we know the global we're loading from is readonly, we can
do that read at compile time.
I've made this arch-dependent mostly because the cases where this
happens often are memory->memory moves, and those don't get
decomposed until lowering.
Did amd64/386/arm/arm64. Other architectures could follow.
Update #26498
Change-Id: I41b1dc831b2cd0a52dac9b97f4f4457888a46389
Reviewed-on: https://go-review.googlesource.com/c/141118
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Since there are no nested loops and/or switches,
loop label can be removed and "bare continue" can be used.
Change-Id: Id642a0859299e4470af544d59884fec51dbb31ee
Reviewed-on: https://go-review.googlesource.com/135837
Reviewed-by: Keith Randall <khr@golang.org>
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Use the new custom truncate/extension code when storing or extracting
float32 values from AuxInts to avoid the value being changed by the
host platform's floating point conversion instructions (e.g. sNaN ->
qNaN).
Updates #27516.
Change-Id: Id39650f1431ef74af088c895cf4738ea5fa87974
Reviewed-on: https://go-review.googlesource.com/134855
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Signalling NaNs were being converted to quiet NaNs during constant
propagation through integer <-> float store-to-load forwarding.
This occurs because we store float32 constants as float64
values and CPU hardware 'quietens' NaNs during conversion between
the two.
Eventually we want to move to using float32 values to store float32
constants, however this will be a big change since both the compiler
and the assembler expect float64 values. So for now this is a small
change that will fix the immediate issue.
Fixes#27193.
Change-Id: Iac54bd8c13abe26f9396712bc71f9b396f842724
Reviewed-on: https://go-review.googlesource.com/132956
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
When compiling with -race, we insert calls to racefuncentry,
into every function. Add a rule that removes them in leaf functions,
without instrumented loads/stores.
Shaves ~30kb from "-race" version of go tool:
file difference:
go_old 15626192
go_new 15597520 [-28672 bytes]
section differences:
global text (code) = -24513 bytes (-0.358598%)
read-only data = -5849 bytes (-0.167064%)
Total difference -30362 bytes (-0.097928%)
Fixes#24662
Change-Id: Ia63bf1827f4cf2c25e3e28dcd097c150994ade0a
Reviewed-on: https://go-review.googlesource.com/121235
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
We generate MOVBLZX for byte-sized LoadReg, so
(MOVBQZX (LoadReg (Arg))) is the same as
(LoadReg (Arg)). Remove those zero extension where possible.
Triggers several times during all.bash.
Fixes#25378
Updates #15300
Change-Id: If50656e66f217832a13ee8f49c47997f4fcc093a
Reviewed-on: https://go-review.googlesource.com/115617
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Memmove can use AVX/prefetches/other optional instructions, so
only do it for small sizes, when call overhead dominates.
Change-Id: Ice5e93deb11462217f7fb5fc350b703109bb4090
Reviewed-on: https://go-review.googlesource.com/112517
Run-TryBot: Ilya Tocar <ilya.tocar@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Munday <mike.munday@ibm.com>
Lack of a well-defined order between VarDef and related
address operations sometimes causes problems with store order
and write barrier transformations; glitches in the order are
made irreparable (by later optimizations) if the two parts of
the glitch straddle a split in the original block caused by
insertion of a write barrier diamond.
Fix this by creating a LocalAddr for addresses of locals
(what VarDef matters for) that takes a memory input to
help make the order explicit. Addr is modified to only
be legal for SB operand, so there is no overlap between
Addr and LocalAddr uses (there may be some downstream
cleanup from this).
Changes to generic.rules and rewrite.go ensure that codegen
tests continue to pass; CSE of LocalAddr is impaired, not
quite sure of the cost.
Fixes#26105.
Change-Id: Id4192b4440aa4e9d7ba54a465c456df9b530b515
Reviewed-on: https://go-review.googlesource.com/122483
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Use the math/bits functions to calculate the number of leading/
trailing zeros, bit length and the population count.
The math/bits package is built as part of the bootstrap process
so we do not need to provide an alternative implementation for
Go versions prior to 1.9.
Passes toolstash-check -all.
Change-Id: I393b4cc1c8accd0ca7cb3599d3926fa6319b574f
Reviewed-on: https://go-review.googlesource.com/113336
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A new pass run after ssa building (before any other
optimization) identifies the "first" ssa node for each
statement. Other "noise" nodes are tagged as being never
appropriate for a statement boundary (e.g., VarKill, VarDef,
Phi).
Rewrite, deadcode, cse, and nilcheck are modified to move
the statement boundaries forward whenever possible if a
boundary-tagged ssa value is removed; never-boundary nodes
are ignored in this search (some operations involving
constants are also tagged as never-boundary and also ignored
because they are likely to be moved or removed during
optimization).
Code generation treats all nodes except those explicitly
marked as statement boundaries as "not statement" nodes,
and floats statement boundaries to the beginning of each
same-line run of instructions found within a basic block.
Line number html conversion was modified to make statement
boundary nodes a bit more obvious by prepending a "+".
The code in fuse.go that glued together the value slices
of two blocks produced a result that depended on the
former capacities (not lengths) of the two slices. This
causes differences in the 386 bootstrap, and also can
sometimes put values into an order that does a worse job
of preserving statement boundaries when values are removed.
Portions of two delve tests that had caught problems were
incorporated into ssa/debug_test.go. There are some
opportunities to do better with optimized code, but the
next-ing is not lying or overly jumpy.
Over 4 CLs, compilebench geomean measured binary size
increase of 3.5% and compile user time increase of 3.8%
(this is after optimization to reuse a sparse map instead
of creating multiple maps.)
This CL worsens the optimized-debugging experience with
Delve; we need to work with the delve team so that
they can use the is_stmt marks that we're emitting now.
The reference output changes from time to time depending
on other changes in the compiler, sometimes better,
sometimes worse.
This CL now includes a test ensuring that 99+% of the lines
in the Go command itself (a handy optimized binary) include
is_stmt markers.
Change-Id: I359c94e06843f1eb41f9da437bd614885aa9644a
Reviewed-on: https://go-review.googlesource.com/102435
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Move ops can be faster than memmove calls because the number of bytes
to be moved is fixed and they don't incur the overhead of a call.
This change allows memmove to be converted into a Move op when the
arguments are disjoint.
The optimization is only enabled on s390x at the moment, however
other architectures may also benefit from it in the future. The
memmove inlining rule triggers an extra 12 times when compiling the
standard library. It will most likely make more of a difference as the
disjoint function is improved over time (to recognize fresh heap
allocations for example).
Change-Id: I9af570dcfff28257b8e59e0ff584a46d8e248310
Reviewed-on: https://go-review.googlesource.com/110064
Run-TryBot: Michael Munday <mike.munday@ibm.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ilya Tocar <ilya.tocar@intel.com>
