Introduce GOOS=ios for iOS systems. GOOS=ios matches "darwin"
build tag, like GOOS=android matches "linux" and GOOS=illumos
matches "solaris". Only ios/arm64 is supported (ios/amd64 is
not).
GOOS=ios and GOOS=darwin remain essentially the same at this
point. They will diverge at later time, to differentiate macOS
and iOS.
Uses of GOOS=="darwin" are changed to (GOOS=="darwin" || GOOS=="ios"),
except if it clearly means macOS (e.g. GOOS=="darwin" && GOARCH=="amd64"),
it remains GOOS=="darwin".
Updates #38485.
Change-Id: I4faacdc1008f42434599efb3c3ad90763a83b67c
Reviewed-on: https://go-review.googlesource.com/c/go/+/254740
Trust: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Everybody was deferring a flush when main already
did that, so drop all that nonsense. (Flush was doing
the package clause stuff.) But then make sure we do
get a package clause when there is correctly no output,
as for an empty package. Do that by triggering a
package clause in allDoc and packageDoc.
Slightly tricky but way less intricate than before.
Fixes#37969.
Change-Id: Ia86828436e6c4ab46e6fdaf2c550047f37f353f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/226998
Reviewed-by: Russ Cox <rsc@golang.org>
This removes all conditions and conditional code (that I could find)
that depended on darwin/arm.
Fixes#35439 (since that only happened on darwin/arm)
Fixes#37611.
Change-Id: Ia4c32a5a4368ed75231075832b0b5bfb1ad11986
Reviewed-on: https://go-review.googlesource.com/c/go/+/227198
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
These changes fix go doc -src mode that vomits comments from random files if
filesystem does not sort files by name. The issue was with parse.ParseDir
using the Readdir order of files, which varies between platforms and filesystem
implementations. Another option is to merge comments using token.FileSet.Iterate
order in cmd/doc, but since ParseDir is mostly used in go doc, I’ve opted for
smaller change because it’s unlikely to break other uses or cause any perfomance
issues.
Example (macOS APFS): `go doc -src net.ListenPacket`
Change-Id: I7f9f368c7d9ccd9a2cbc48665f2cb9798c7b3a3f
GitHub-Last-Rev: 654fb45042
GitHub-Pull-Request: golang/go#36104
Reviewed-on: https://go-review.googlesource.com/c/go/+/210999
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
If no writes to the package buffer happen, then the package clause
does not get printed. This is a bug for cases where a file just contains
the package clause.
We fix this by separating the printing of package clause to a new
function and calling it from (*pkgBuffer).Write as well as (*Package).flush.
Updates #31457
Change-Id: Ia3bd0ea3963274c460a45d1e37fafc6ee0a197f0
Reviewed-on: https://go-review.googlesource.com/c/go/+/206128
Run-TryBot: Agniva De Sarker <agniva.quicksilver@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
We use the typedValue map to prevent showing typed variables
and constants from appearing in the VARIABLES/CONSTANTS section
because they will be anyways shown in the TYPES section
for that type.
However, when a type is unexported, but the variable is exported,
then unconditionally setting it to true in the map suppresses it
from being shown in the VARIABLES section. Thus, we set the
variable or constant in the typedValue map only when
the type name is exported.
Fixes#31067
Change-Id: Id3ec4b313c9ea7e3ce6fe279680d56f65451719f
Reviewed-on: https://go-review.googlesource.com/c/go/+/206129
Run-TryBot: Agniva De Sarker <agniva.quicksilver@gmail.com>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change employs the same strategy as in CL 203017
to detect when vendoring is in use, and if so treats
the vendor directory as a (non-module, prefixless) root.
The integration test also verifies that the 'std' and 'cmd'
modules are included and their vendored dependencies are
visible (as they are with 'go list') even when outside of
those modules.
Fixes#35224
Change-Id: I18cd01218e9eb97c1fc6e2401c1907536b0b95f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/205577
Run-TryBot: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Jay Conrod <jayconrod@google.com>
You were a useful port and you've served your purpose.
Thanks for all the play.
A subsequent CL will remove amd64p32 (including assembly files and
toolchain bits) and remaining bits. The amd64p32 removal will be
separated into its own CL in case we want to support the Linux x32 ABI
in the future and want our old amd64p32 support as a starting point.
Updates #30439
Change-Id: Ia3a0c7d49804adc87bf52a4dea7e3d3007f2b1cd
Reviewed-on: https://go-review.googlesource.com/c/go/+/199499
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently there is no way for go doc to output a clean
one-line symbol representation of types, functions, vars
and consts without documentation lines or other text lines
added.
For example `go doc fmt` has a huge introduction so if you
pass that to grep or fzf to search a symbol let say scan
`go doc fmt | grep scan` you get way to many false
positives.
Added a `-short` flag to be able to do
`go doc -short fmt | grep scan` instead which will result in
just the symbols you are looking for.
func Fscan(r io.Reader, a ...interface{}) (n int, err error)
func Fscanf(r io.Reader, format string, a ...interface{}) (n int, err error)
func Fscanln(r io.Reader, a ...interface{}) (n int, err error)
func Sscan(str string, a ...interface{}) (n int, err error)
func Sscanf(str string, format string, a ...interface{}) (n int, err error)
func Sscanln(str string, a ...interface{}) (n int, err error)
Fixes#32597
Change-Id: I77a73838adc512c8d1490f5a82075de6b0462a31
Reviewed-on: https://go-review.googlesource.com/c/go/+/184017
Run-TryBot: Andrew Bonventre <andybons@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Bonventre <andybons@golang.org>
The current cmd/doc implementation uses go/build.Import in a few
places to check whether a package is findable and importable.
go/build has limited support for finding packages in modules,
but to do so, build.Import requires knowing the source directory
to use when performing the lookup (so it can find the go.mod file).
Otherwise, it only looks inside the GOPATH workspace.
Start passing the current working directory to build.Import calls,
so that it can correctly look for packages in modules when in cmd/doc
is executed in module mode.
Before this change, cmd/doc in module mode could mistakenly find and
use a package in the GOPATH workspace, instead of the current module.
Since the result of os.Getwd is needed in even more places, assign it
to a local variable in parseArgs now.
Fixes#28992
Updates #26504
Change-Id: I7571618e18420d2d3b3890cc69ade2d97b1962bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/183991
Run-TryBot: Dmitri Shuralyov <dmitshur@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Bryan C. Mills <bcmills@google.com>
They were previously indented at the same level as the normal text when
printing a single symbol or the description of a field.
Running "go doc text/template Must":
Before:
func Must(t *Template, err error) *Template
Must is a helper that wraps a call to a function returning (*Template,
error) and panics if the error is non-nil. It is intended for use in
variable initializations such as
var t = template.Must(template.New("name").Parse("text"))
After:
func Must(t *Template, err error) *Template
Must is a helper that wraps a call to a function returning (*Template,
error) and panics if the error is non-nil. It is intended for use in
variable initializations such as
var t = template.Must(template.New("name").Parse("text"))
Running "go doc http Request.Header":
Before:
type Request struct {
// Header contains the request header fields either received
// by the server or to be sent by the client.
//
// If a server received a request with header lines,
//
// Host: example.com
// accept-encoding: gzip, deflate
// Accept-Language: en-us
// fOO: Bar
// foo: two
//
// then
//
// Header = map[string][]string{
// "Accept-Encoding": {"gzip, deflate"},
// "Accept-Language": {"en-us"},
// "Foo": {"Bar", "two"},
// }
...
After:
type Request struct {
// Header contains the request header fields either received by the server or
// to be sent by the client.
//
// If a server received a request with header lines,
//
// Host: example.com
// accept-encoding: gzip, deflate
// Accept-Language: en-us
// fOO: Bar
// foo: two
//
// then
//
// Header = map[string][]string{
// "Accept-Encoding": {"gzip, deflate"},
// "Accept-Language": {"en-us"},
// "Foo": {"Bar", "two"},
// }
...
Fixes#29708
Change-Id: Ibe1a6a7a76d6b19c5737ba6e8210e3ad0b88ce16
GitHub-Last-Rev: 439c0fe70a
GitHub-Pull-Request: golang/go#31120
Reviewed-on: https://go-review.googlesource.com/c/go/+/169957
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
It really only matters for types, and the code already worked but was
blocked by a usage check.
Fixes#25595
Change-Id: I823f313b682b37616ea555aee079e2fe39f914c2
Reviewed-on: https://go-review.googlesource.com/c/144357
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The old godoc didn't do this either, perhaps because it's a little
tricky, but it can be done using a special type from the go/printer
package. (Usually we just use go/format).
Fixes#28195.
Change-Id: Ic6d3df3953ba71128398ceaf9a133c798551b6b8
Reviewed-on: https://go-review.googlesource.com/c/143037
Reviewed-by: Robert Griesemer <gri@golang.org>
One too many lines was deleted, and it would print a header multiple times.
Add a test.
Change-Id: I4906b454dbb66193d515ffacf43849ffdc2dede6
Reviewed-on: https://go-review.googlesource.com/c/142937
Reviewed-by: Ralph Corderoy <ralph@inputplus.co.uk>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Unlike the one for the old godoc, you need the -u flag to see
unexported symbols. This seems like the right behavior: it's
consistent.
For now at least, the argument must be a package, not a symbol.
This is also different from old godoc.
Required a little refactoring but also cleaned up a few things.
Update #25595
Leaving the bug open for now until we tackle
go doc -all symbol
Change-Id: Ibc1975bfa592cb1e92513eb2e5e9e11e01a60095
Reviewed-on: https://go-review.googlesource.com/c/141977
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It's long-desired but was blocked by #26835. That is now fixed, so
it's easy. When -src is off, we behave as before. But with -src
set, initialize the go/doc package to preserve the original AST and
things flow very easily.
With -src, since you're seeing inside the package source anyway it
shows unexported fields and constants: you see the original source.
But you still need -u to ask about them.
Fixes#18807
Change-Id: I473e90323b4eff0735360274dc0d2d9dba16ff8b
Reviewed-on: https://go-review.googlesource.com/c/140959
Reviewed-by: Andrew Gerrand <adg@golang.org>
Run-TryBot: Andrew Gerrand <adg@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Previously, cmd/doc treated GOROOT/src and GOPATH/src
as the roots of the directory trees holding packages, assuming
that the import path would be the path elements after the src directory.
With modules, each module serves as its own root of a file tree,
and the import path prefix starts with the module path before
adding the path elements after the module root.
There are ways we could make this more efficient,
but for now this is a fairly small adjustment to get 'go doc'
working OK for modules for Go 1.11.
Fixes#26635.
Change-Id: Ifdee4194601312846c7b1fc67f2fe7a4a44269cc
Reviewed-on: https://go-review.googlesource.com/126799
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Keep searching for a package that is both findable and importable. The
current code would always guarantee that a package was findable but
exited if it was not importable.
Fixes#25478
Change-Id: I237b7dfafb930cae02538c4a2e4d5ce0c1058478
Reviewed-on: https://go-review.googlesource.com/114295
Reviewed-by: Bryan C. Mills <bcmills@google.com>
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Bryan C. Mills <bcmills@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It was skipping dirs starting with ".", but it was missing the "_"
prefix and the "testdata" name. From "go help packages":
Directory and file names that begin with "." or "_" are ignored
by the go tool, as are directories named "testdata".
Before the change:
$ go doc z # using src/cmd/go/testdata/testvendor/src/q/z
package z // import "."
After the fix, it falls back to the current directory, as expected when
a single argument isn't found as a package in $GOPATH.
TestMain needs a small adjustment to keep the tests working, as now
their use of cmd/doc/testdata would normally not work.
This is the second try for this fix; the first time around, we included
cmd/doc/testdata to the dirs list by sending it to the channel via a
goroutine. However, that can end up in a send to a closed channel, if
GOROOT is a very small directory tree or missing.
To avoid that possibility, include the extra directory by pre-populating
the paths list, before the walking of GOROOT and GOPATH actually starts.
Fixes#24462.
Change-Id: I3b95b6431578e0d5cbb8342f305debc4ccb5f656
Reviewed-on: https://go-review.googlesource.com/109216
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Elias Naur <elias.naur@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
This reverts commit 49e3e436e7.
Reason for revert: breaks iOS builders and Daniel can't fix for a week.
Change-Id: Ib6ff08de9540d46345dc31e1f820c8555e3de3ca
Reviewed-on: https://go-review.googlesource.com/107218
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
It was skipping dirs starting with ".", but it was missing the "_"
prefix and the "testdata" name. From "go help packages":
Directory and file names that begin with "." or "_" are ignored
by the go tool, as are directories named "testdata".
Before the change:
$ go doc z # using src/cmd/go/testdata/testvendor/src/q/z
package z // import "."
After the fix, it falls back to the current directory, as expected when
a single argument isn't found as a package in $GOPATH.
TestMain needs a small adjustment to keep the tests working, as now
their use of cmd/doc/testdata would normally not work.
Fixes#24462.
Change-Id: I1f5d6d1eba0fb59aff55db33b3b1147e300284ef
Reviewed-on: https://go-review.googlesource.com/106935
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The go/printer (and thus gofmt) uses a heuristic to determine
whether to break alignment between elements of an expression
list which is spread across multiple lines. The heuristic only
kicked in if the entry sizes (character length) was above a
certain threshold (20) and the ratio between the previous and
current entry size was above a certain value (4).
This heuristic worked reasonably most of the time, but also
led to unfortunate breaks in many cases where a single entry
was suddenly much smaller (or larger) then the previous one.
The behavior of gofmt was sufficiently mysterious in some of
these situations that many issues were filed against it.
The simplest solution to address this problem is to remove
the heuristic altogether and have a programmer introduce
empty lines to force different alignments if it improves
readability. The problem with that approach is that the
places where it really matters, very long tables with many
(hundreds, or more) entries, may be machine-generated and
not "post-processed" by a human (e.g., unicode/utf8/tables.go).
If a single one of those entries is overlong, the result
would be that the alignment would force all comments or
values in key:value pairs to be adjusted to that overlong
value, making the table hard to read (e.g., that entry may
not even be visible on screen and all other entries seem
spaced out too wide).
Instead, we opted for a slightly improved heuristic that
behaves much better for "normal", human-written code.
1) The threshold is increased from 20 to 40. This disables
the heuristic for many common cases yet even if the alignment
is not "ideal", 40 is not that many characters per line with
todays screens, making it very likely that the entire line
remains "visible" in an editor.
2) Changed the heuristic to not simply look at the size ratio
between current and previous line, but instead considering the
geometric mean of the sizes of the previous (aligned) lines.
This emphasizes the "overall picture" of the previous lines,
rather than a single one (which might be an outlier).
3) Changed the ratio from 4 to 2.5. Now that we ignore sizes
below 40, a ratio of 4 would mean that a new entry would have
to be 4 times bigger (160) or smaller (10) before alignment
would be broken. A ratio of 2.5 seems more sensible.
Applied updated gofmt to all of src and misc. Also tested
against several former issues that complained about this
and verified that the output for the given examples is
satisfactory (added respective test cases).
Some of the files changed because they were not gofmt-ed
in the first place.
For #644.
For #7335.
For #10392.
(and probably more related issues)
Fixes#22852.
Change-Id: I5e48b3d3b157a5cf2d649833b7297b33f43a6f6e
Otherwise, a populated GOPATH might result in failures such as:
$ go test
[...] no buildable Go source files in [...]/gopherjs/compiler/natives/src/crypto/rand
exit status 1
Move the initialization of the dirs walker out of the init func, so that
we can control its behavior in the tests.
Updates #24464.
Change-Id: I4b26a7d3d6809bdd8e9b6b0556d566e7855f80fe
Reviewed-on: https://go-review.googlesource.com/101836
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Before, an argument that started ./ or ../ was not treated as
a package relative to the current directory. Thus
$ cd $GOROOT/src/text
$ go doc ./template
could find html/template as $GOROOT/src/html/./template
is a valid Go source directory.
Fix this by catching such paths and making them absolute before
processing.
Fixes#23383.
Change-Id: Ic2a92eaa3a6328f728635657f9de72ac3ee82afb
Reviewed-on: https://go-review.googlesource.com/98396
Reviewed-by: Ian Lance Taylor <iant@golang.org>
The current implementation prints a log, "invalid program: unexpected
type for embedded field", when the form *package.ident is embedded in
a struct declaration.
Note that since valid qualified identifiers must be exported, the result
for a valid program does not change.
Change-Id: If8b9d7056c56b6a6c5482eb749168a63c65ef685
Reviewed-on: https://go-review.googlesource.com/84436
Reviewed-by: Robert Griesemer <gri@golang.org>
Run-TryBot: Robert Griesemer <gri@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
That can occur if we have -u set and there is an upper- and lower-case
name of the same spelling in a single declaration.
A rare corner case but easy to fix.
Fix by remembering what we've printed.
Fixes#21797.
Change-Id: Ie0b681ae8c277fa16e9635ba594c1dff272b8aeb
Reviewed-on: https://go-review.googlesource.com/78715
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
In golang.org/cl/59413, the two-argument behavior of cmd/doc was changed
to use findPackage instead of build.Import, meaning that the tool was
more consistent and useful.
However, it introduced a regression:
$ go doc bytes Foo
doc: no such package: bytes
This is because the directory list search would not find Foo in bytes,
and reach the end of the directory list - thus resulting in a "no such
package" error, since no directory matched our first argument.
Move the "no such package" error out of parseArgs, so that the "loop
until something is printed" loop can have control over it. In
particular, it is useful to know when we have reached the end of the
list without any exact match, yet we did find one package matching
"bytes":
$ go doc bytes Foo
doc: no symbol Foo in package bytes
While at it, make the "no such package" error not be fatal so that we
may test for it. It is important to have the test, as parseArgs may now
return a nil package instead of exiting the entire program, potentially
meaning a nil pointer dereference panic.
Fixes#22810.
Change-Id: I90cc6fd755e2d1675bea6d49a1c13cc18ac9bfb9
Reviewed-on: https://go-review.googlesource.com/78677
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
When given one argument, as in
go doc binary.BigEndian
doc would search for the package, but when given two, as in
go doc binary BigEndian
it would not. Fix the inconsistency.
Fixes#18697Fixes#18664
Change-Id: Ib59dc483e8d4f91e6061c77a5ec24d0a50e115f0
Reviewed-on: https://go-review.googlesource.com/59413
Reviewed-by: Aliaksandr Valialkin <valyala@gmail.com>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
By analogy with the handling of methods on types, show the documentation
for a single field of a struct.
% go doc ast.structtype.fields
struct StructType {
Fields *FieldList // list of field declarations
}
%
Fixes#19169.
Change-Id: I002f992e4aa64bee667e2e4bccc7082486149842
Reviewed-on: https://go-review.googlesource.com/38438
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Some field-lists (especially in generated code) can be excessively long.
In the one-line printout, it does not make sense to print all elements
of the list if line-wrapping causes the "one-line" to become multi-line.
// Before:
var LongLine = newLongLine("someArgument1", "someArgument2", "someArgument3", "someArgument4", "someArgument5", "someArgument6", "someArgument7", "someArgument8")
// After:
var LongLine = newLongLine("someArgument1", "someArgument2", "someArgument3", "someArgument4", ...)
Change-Id: I4bbbe2dbd1d7be9f02d63431d213088c3dee332c
Reviewed-on: https://go-review.googlesource.com/36031
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
For historical reasons, the go/doc package does not include
the methods within an interface as part of the documented
methods for that type. Thus,
go doc ast.Node.Pos
gives an incorrect and confusing error message:
doc: no method Node.Pos in package go/ast
This CL does some dirty work to dig down to the methods
so interface methods now present their documentation:
% go doc ast.node.pos
func Pos() token.Pos // position of first character belonging to the node
%
It must largely sidestep the doc package to do this, which
is a shame. Perhaps things will improve there one day.
The change does not handle embeddings, and in principle the
same approach could be done for struct fields, but that is also
not here yet. But this CL fixes the thing that was bugging me.
Change-Id: Ic10a91936da96f54ee0b2f4a4fe4a8c9b93a5b4a
Reviewed-on: https://go-review.googlesource.com/31852
Reviewed-by: Robert Griesemer <gri@golang.org>
The documentation for doc says:
> Doc prints the documentation comments associated with the item identified by its
> arguments (a package, const, func, type, var, or method) followed by a one-line
> summary of each of the first-level items "under" that item (package-level
> declarations for a package, methods for a type, etc.).
Certain variables (and constants, functions, and types) have value specifications
that are multiple lines long. Prior to this change, doc would print out all of the
lines necessary to display the value. This is inconsistent with the documented
behavior, which guarantees a one-line summary for all first-level items.
We fix this here by writing a general oneLineNode method that always returns
a one-line summary (guaranteed!) of any input node.
Packages like image/color/palette and unicode now become much
more readable since large slices are now a single line.
$ go doc image/color/palette
<<<
// Before:
var Plan9 = []color.Color{
color.RGBA{0x00, 0x00, 0x00, 0xff},
color.RGBA{0x00, 0x00, 0x44, 0xff},
color.RGBA{0x00, 0x00, 0x88, 0xff},
... // Hundreds of more lines!
}
var WebSafe = []color.Color{
color.RGBA{0x00, 0x00, 0x00, 0xff},
color.RGBA{0x00, 0x00, 0x33, 0xff},
color.RGBA{0x00, 0x00, 0x66, 0xff},
... // Hundreds of more lines!
}
// After:
var Plan9 = []color.Color{ ... }
var WebSafe = []color.Color{ ... }
>>>
In order to test this, I ran `go doc` and `go doc -u` on all of the
standard library packages and diff'd the output with and without the
change to ensure that all differences were intended.
Fixes#13072
Change-Id: Ida10b7796b7e4e174a929b55c60813a9eb7158fe
Reviewed-on: https://go-review.googlesource.com/25420
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
In golang.org/cl/22354, we added functionality to group functions under the
type that they construct to. In this CL, we extend the same concept to
constants and variables. This makes the doc tool more consistent with what
the godoc website does.
$ go doc reflect | egrep "ChanDir|Kind|SelectDir"
<<<
// Before:
const RecvDir ChanDir = 1 << iota ...
const Invalid Kind = iota ...
type ChanDir int
type Kind uint
type SelectDir int
func ChanOf(dir ChanDir, t Type) Type
// After:
type ChanDir int
const RecvDir ChanDir = 1 << iota ...
type Kind uint
const Invalid Kind = iota ...
type SelectDir int
const SelectSend SelectDir ...
func ChanOf(dir ChanDir, t Type) Type
>>>
Furthermore, a fix was made to ensure that the type was printed in constant
blocks when the iota was applied on an unexported field.
$ go doc reflect SelectSend
<<<
// Before:
const (
SelectSend // case Chan <- Send
SelectRecv // case <-Chan:
SelectDefault // default
)
// After:
const (
SelectSend SelectDir // case Chan <- Send
SelectRecv // case <-Chan:
SelectDefault // default
)
>>>
Fixes#16569
Change-Id: I26124c3d19e50caf9742bb936803a665e0fa6512
Reviewed-on: https://go-review.googlesource.com/25419
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The commit in golang.org/cl/22354 groups constructors functions under
the type that they construct to. However, this caused a minor regression
where functions that had unexported return values were not being printed
at all. Thus, we forgo the grouping logic if the type the constructor falls
under is not going to be printed.
Fixes#16568
Change-Id: Idc14f5d03770282a519dc22187646bda676af612
Reviewed-on: https://go-review.googlesource.com/25369
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
Reviewed-by: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Changes made:
* Disallow star expression on interfaces as this is not possible.
* Show an embedded "error" in an interface as public similar to
how godoc does it.
* Properly handle selector expressions in both structs and interfaces.
This is possible since a type may refer to something defined in
another package (e.g. io.Reader).
Before:
<<<
$ go doc runtime.Error
type Error interface {
// RuntimeError is a no-op function but
// serves to distinguish types that are run time
// errors from ordinary errors: a type is a
// run time error if it has a RuntimeError method.
RuntimeError()
// Has unexported methods.
}
$ go doc compress/flate Reader
doc: invalid program: unexpected type for embedded field
doc: invalid program: unexpected type for embedded field
type Reader interface {
io.Reader
io.ByteReader
}
>>>
After:
<<<
$ go doc runtime.Error
type Error interface {
error
// RuntimeError is a no-op function but
// serves to distinguish types that are run time
// errors from ordinary errors: a type is a
// run time error if it has a RuntimeError method.
RuntimeError()
}
$ go doc compress/flate Reader
type Reader interface {
io.Reader
io.ByteReader
}
>>>
Fixes#16567
Change-Id: I272dede971eee9f43173966233eb8810e4a8c907
Reviewed-on: https://go-review.googlesource.com/25365
Reviewed-by: Rob Pike <r@golang.org>
Run-TryBot: Joe Tsai <thebrokentoaster@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is a subset of https://golang.org/cl/20022 with only the copyright
header lines, so the next CL will be smaller and more reviewable.
Go policy has been single space after periods in comments for some time.
The copyright header template at:
https://golang.org/doc/contribute.html#copyright
also uses a single space.
Make them all consistent.
Change-Id: Icc26c6b8495c3820da6b171ca96a74701b4a01b0
Reviewed-on: https://go-review.googlesource.com/20111
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The structure of the code meant that an embedded field was never
checked for export status. We need to check the name of the type,
which is either of type T or type *T, and T might be unexported.
Fixes#14356.
Change-Id: I56f468e9b8ae67e9ed7509ed0b91d860507baed2
Reviewed-on: https://go-review.googlesource.com/19701
Reviewed-by: Robert Griesemer <gri@golang.org>
The NamePos value was not being set, and would default to a value
of zero. This would cause the printing logic to get confused as
to where exactly to place the "Has unexported fields" string.
A trivial package changes from
<
type A struct {
A int // A
B int
// B
// Has unexported fields.
}
>
to
<
type A struct {
A int // A
B int // B
// Has unexported fields.
}
>
Fixes#12971
Change-Id: I53b7799a1f1c0ad7dcaddff83d9aaeb1d6b7823e
Reviewed-on: https://go-review.googlesource.com/16286
Run-TryBot: Joe Tsai <joetsai@digital-static.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
The code to strip GOROOT and GOPATH had a bug: it assumed there
were bytes after the GOROOT prefix but there might not be.
Fix this and other issues by taking care the prefix is really a
file name prefix for the path, not just a string prefix, and
handle the case where GOROOT==path.
Change-Id: I8066865fd05f938bb6dbf3bb8ab1fc58e5cf6bb5
Reviewed-on: https://go-review.googlesource.com/15112
Run-TryBot: Rob Pike <r@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Andrew Gerrand <adg@golang.org>
The test case is
go doc rand.Float64
The first package it finds is crypto/rand, which does not have a Float64.
Before this change, cmd/doc would stop there even though math/rand
has the symbol. After this change, we get:
% go doc rand.Float64
package rand // import "math/rand"
func Float64() float64
Float64 returns, as a float64, a pseudo-random number in [0.0,1.0) from the
default Source.
%
Another nice consequence is that if a symbol is not found, we might get
a longer list of packages that were examined:
% go doc rand.Int64
doc: no symbol Int64 in packages crypto/rand, math/rand
exit status 1
%
This change introduces a coroutine to scan the file system so that if
the symbol is not found, the coroutine can deliver another path to try.
(This is darned close to the original motivation for coroutines.)
Paths are delivered on an unbuffered channel so the scanner does
not proceed until candidate paths are needed.
The scanner is attached to a new type, called Dirs, that caches the results
so if we need to scan a second time, we don't walk the file system
again. This is significantly more efficient than the existing code, which
could scan the tree multiple times looking for a package with
the symbol.
Change-Id: I2789505b9992cf04c19376c51ae09af3bc305f7f
Reviewed-on: https://go-review.googlesource.com/14921
Reviewed-by: Andrew Gerrand <adg@golang.org>
The code assumed that if the first entry was unexported, all the
entries were. The fix is simple: delete a bunch of code.
Fixes#12286.
Change-Id: Icb09274e99ce97df4d8bddbe59d17a5c0622e4c6
Reviewed-on: https://go-review.googlesource.com/14780
Reviewed-by: Andrew Gerrand <adg@golang.org>
Some of those consts were supposed to be vars.
Caught by Ingo Oeser.
Change-Id: Ifc12e4a8ee61ebf5174e4ad923956c546dc096e2
Reviewed-on: https://go-review.googlesource.com/11296
Reviewed-by: Andrew Gerrand <adg@golang.org>
Most important: skip test on darwin/arm64 for unclear reasons.
First cut at the test missed this feature of go doc: when asking for
the docs for a type, include any function that looks like it constructs
a that type as a return value.
Change-Id: I124e7695e5d365e2b12524b541a9a4e6e0300fbc
Reviewed-on: https://go-review.googlesource.com/11295
Reviewed-by: Rob Pike <r@golang.org>
nacl is really giving a hard time. avoid all external dependencies in the test.
Worked with trybots, failed in the build. No explanation, but this should fix it.
TBR=rsc
Change-Id: Icb644286dbce88f17ee3d96ad90efba34a80a92d
Reviewed-on: https://go-review.googlesource.com/11291
Reviewed-by: Rob Pike <r@golang.org>
