Rewrite a method expression such as 'T.String' (where T is type param
and String is part of its type bound Stringer) as:
func(rcvr T, other params...) {
return Stringer(rcvr).String(other params...)
}
New function buildClosure2 to create the needed closure. The conversion
Stringer(rcvr) uses the dictionary in the outer function.
For a method expression like 'Test[T].finish' (where finish is a method
of Test[T]), we can already deal with this in buildClosure(). We just
need fix transformDot() to allow the method lookup to fail, since shapes
have no methods on them. That's fine, since for any instantiated
receiver type, we always use the methods on the generic base type.
Also removed the OMETHEXPR case in the main switch of node(), which
isn't needed any (and removes one more potential unshapify).
Also, fixed two small bugs with handling closures that have generic
params or generic captured variables. Need to set the instInfo for the
closure in the subst struct when descending into a closure during
genericSubst() and was missing initializing the startItabConv and gfInfo
fields in the closure info.
Change-Id: I6dadedd1378477936a27c9c544c014cd2083cfb7
Reviewed-on: https://go-review.googlesource.com/c/go/+/338129
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes -G=3 issue with issue44688.go.
Change-Id: Ie98c0cbd48683dedd115332043f14c8f3160f46c
Reviewed-on: https://go-review.googlesource.com/c/go/+/337029
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Changes to add CONVIFACE nodes where possible in noder2, even when the
args are typeparams. The transformation to insert a CONVIFACE node can
usually happen when there an obvious assignment/conversion to an
interface type from a non-interface type. So, we now do this
tranformation for:
- direct conversions to an interface type
- function arguments that are implicitly converted to an interface
based on the parameter types.
- EQ/NE comparison of an interface and a non-interface
With this change, we can remove some special case checks for CONVIFACE
nodes after transformation in node(), and instead just have the one
check in the CONVIFACE check.
Change-Id: I7cf2ef920aebf9e5553210aeaf19f344e128ca62
Reviewed-on: https://go-review.googlesource.com/c/go/+/336992
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
Removed a case in transformCall() where we were setting a type on n,
which isn't needed, since noder2 already set the type of n. More
importantly, we are losing information, since the type of the results
may be a shape type, but the actual type of call is the known type
from types2, which may be a concrete type (in this case Zero[MyInt]).
That concrete type will then be used correctly if the concrete result is
converted to an interface.
If we are inlining the call to Zero[MyInt], we need to add an implicit
CONVNOP operation, since we are going to use the result variable
directly, which has a shape type. So, add an implicit CONVNOP to
remember that the known type is the concrete type.
Also cleaned up 14.go a bit, so it is more understandable. Renamed type
T to AnyInt, since T is used elsewhere as a type parameter. Reformatted
Zero function and added a comment.
Change-Id: Id917a2e054e0bbae9bd302232853fa8741d49b64
Reviewed-on: https://go-review.googlesource.com/c/go/+/336430
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
types2 currently ignores pragmas, so it does not catch a conversion
error when converting a pointer to a type which is NOT marked notinheap
to a pointer to a convertible type, but which is marked notinheap.
So, we specifically check for this error in transformConv() and report
it during noder2.
Change-Id: I6e9c9ee29f53fa5e490c1ac8306e2191db59eeb4
Reviewed-on: https://go-review.googlesource.com/c/go/+/333369
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Trust: Robert Griesemer <gri@golang.org>
Trust: Dan Scales <danscales@google.com>
Unneeded after the previous CL changed inlining to leave OINLCALL
nodes in place.
Change-Id: I9af09a86a21caa51a1117b3de17d7312dd702600
Reviewed-on: https://go-review.googlesource.com/c/go/+/332650
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Allow fix for issue46725 to work for -G=3 mode.
Change-Id: Id522fbc2278cf878cb3f95b3205a2122c164ae29
Reviewed-on: https://go-review.googlesource.com/c/go/+/331470
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
So next CL can move MethodValueWrapper to walk, since when walk is now
the only place which uses this function.
Change-Id: Id3be359bfc38efb022451cb7f9e53c2868fe7e12
Reviewed-on: https://go-review.googlesource.com/c/go/+/330840
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Go spec call them "method values", not "partial calls". Note that
we use "OMETHVALUE" (as opposed to "OMETHODVALUE") to be consistent
with "OMETHEXPR".
Change-Id: I1efd985d4b567a1b4b20aeb603eb82db579edbd5
Reviewed-on: https://go-review.googlesource.com/c/go/+/330837
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
CL 330671 move rewriting method call to method expression to escape
analysis. This CL move the rewriting up further, into typecheck. It
helps simplify the code for dowstream passes, as they now only have to
deal with OCALLFUNC.
There're two notes:
- For -G=3, we can't rewrite d.M() where d is an instantiated receiver
in transformCall, but let irgen.stencil to rewrite it.
- Escape analysis still have to check for rewriting method calls, as
the devirtualization pass can still generate OCALLMETH.
Does not pass toolstash, since when the export data now contains method
expression calls instead of method calls.
Change-Id: I77465ef04d50dc4efedddca7eb55b3fc9483db0e
Reviewed-on: https://go-review.googlesource.com/c/go/+/330831
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When converting from a type param to an interface, allow it if
the type bound implements that interface.
Query: some conversions go through this path, some use another path?
The test does
var i interface{foo()int} = x
but
i := (interface{foo()int})(x)
works at tip.
Change-Id: I84d497e5228c0e1d1c9d76ffebaedce09dc45e8e
Reviewed-on: https://go-review.googlesource.com/c/go/+/325409
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
When constructing struct literals, importers need a way to specify
precisely which field to initialize without worrying about visibility
or those fields being blank. (A blank field doesn't actually need to
be initialized, but the expression needs to be evaluated still, and
with the right order-of-operations.)
This CL changes StructKeyExpr's Field field to point directly to the
corresponding types.Field, rather than merely holding a copy of its
Sym and Offset. This is akin to past changes to add
SelectorExpr.Selection.
Change-Id: I95b72b1788f73206fcebc22b456cf6b1186db6a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/325031
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
When converting from a generic function to a concrete implementation,
add a dictionary argument to the generic function (both an actual
argument at each callsite, and a formal argument of each
implementation).
The dictionary argument comes before all other arguments (including
any receiver).
The dictionary argument is checked for validity, but is otherwise unused.
Subsequent CLs will start using the dictionary for, e.g., converting a
value of generic type to interface{}.
Import/export required adding support for LINKSYMOFFSET, which is used
by the dictionary checking code.
Change-Id: I16a7a8d23c7bd6a897e0da87c69f273be9103bd7
Reviewed-on: https://go-review.googlesource.com/c/go/+/323272
Trust: Keith Randall <khr@golang.org>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Create transformCompLit, which does the transformations done by
tcCompLit without the typechecking. This removes the final use of the
old typechecker in the noder2 pass.
Other changes:
- Used the transformCompLit in stringstorunelit(), which creates an
OCOMPLIT that needs transformation as well.
- Fixed one place in transformIndex where we were still using
typecheck.AssignConv, when we should be using its equivalent
noder.assignconvfn.
The go/test tests always run with -G=3, and I also tested that the "go
test" tests continue to run correctly with -G=3.
Change-Id: I4a976534ab7311cf2a5f43841026dbf7401e62b6
Reviewed-on: https://go-review.googlesource.com/c/go/+/308529
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
Reviewed-by: Robert Griesemer <gri@golang.org>
Confusingly, the set of all methods of an interface is currently set in
Fields field of types.Interface. This is true, even though there is
already an allMethods field (and AllMethods method) of types.Type.
Change so the set of all methods of an interface are stored in
Type.allMethods, and Interface.Fields is removed. Update the comments
for Methods and AllMethods.
Change-Id: Ibc32bafae86831cba62606b079a855690612c759
Reviewed-on: https://go-review.googlesource.com/c/go/+/307209
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The setting of n.Use for a call node in transformCall() (and previously
in Call()), was not corrrect, since it was trying to use the number of
results of the call, rather than whether the call result was actually
used. We are already setting n.Use to ir.CallUseStmt if the call node is
directly a statement, so we just need to initialize n.Use to
ir.CallExprStmt in Call(), which will get changed to ir.CallUseStmt at
the statement level if it's used as a statement.
Enable inlining of stenciled functions (just disabled for testing,
easier debugging). The above n.Use fix was required for the inlining
to work for two cases.
Change-Id: Ie4ef6cd53fd4b20a4f3be31e629280909a545b7d
Reviewed-on: https://go-review.googlesource.com/c/go/+/305913
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Fix various small bugs related to delaying transformations due to type
params. Most of these relate to the need to delay a transformation when
an argument of an expression or statement has a type parameter that has
a structural constraint. The structural constraint implies the operation
should work, but the transformation can't happen until the actual value
of the type parameter is known.
- delay transformations for send statements and return statements if
any args/values have type params.
- similarly, delay transformation of a call where the function arg has
type parameters. This is mainly important for the case where the
function arg is a pure type parameter, but has a structural
constraint that requires it to be a function. Move the setting of
n.Use to transformCall(), since we may not know how many return
values there are until then, if the function arg is a type parameter.
- set the type of unary expressions from the type2 type (as we do with
most other expressions), since that works better with expressions
with type params.
- deal with these delayed transformations in subster.node() and convert
the CALL checks to a switch statement.
- make sure ir.CurFunc is set properly during stenciling, including
closures (needed for transforming return statements during
stenciling).
New test file typelist.go with tests for these cases.
Change-Id: I1b82f949d8cec47d906429209e846f4ebc8ec85e
Reviewed-on: https://go-review.googlesource.com/c/go/+/305729
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Pull out the tranformation part of the typechecking functions for:
- selector expressions (OXDOT)
- calls to builtin functions (which go through the typechecker loop
twice, once for the call and once for each different kind of
builtin).
Some of the transformation functions create new nodes that should have
the same type as the original node. For consistency, now each of the
transformation functions requires that the node passed in has its type
and typecheck flag set. If the transformation function replaces or adds
new nodes, it will set the type and typecheck flag for those new nodes.
As usual, passes all the gotests, even with -G=3 enabled.
Change-Id: Ic48b0ce5f58425f4a358afa78315bfc7c28066c4
Reviewed-on: https://go-review.googlesource.com/c/go/+/304729
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
Pull out the transformation part of the typechecking functions for:
- assignment statements
- return statements
- send statements
- select statements
- type conversions
- normal function/method calls
- index operations
The transform functions are like the original typechecking functions,
but with all code removed related to:
- Detecting compile-time errors (already done by types2)
- Setting the actual type of existing nodes (already done based on
info from types2)
- Dealing with untyped constants
Moved all the transformation functions to a separate file, transform.go.
Continuing with the same pattern, we delay transforming a node if it has
any type params in its args, marking it with a typecheck flag of 3, and
do the actual transformation during stenciling.
Assignment statements are tricky, since their transformation must be
delayed if any of the left or right-hands-sides are delayed.
Still to do are:
- selector expressions (OXDOT)
- composite literal expressions (OCOMPLIT)
- builtin function calls
Change-Id: Ie608cadbbc69b40db0067a5536cf707dd974aacc
Reviewed-on: https://go-review.googlesource.com/c/go/+/304049
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Dan Scales <danscales@google.com>
Trust: Robert Griesemer <gri@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
