The ValAndOff type is a 64bit integer holding a 32bit value and a
32bit offset in each half, but for historical reasons its Val and Off
methods returned an int64. This was convenient when AuxInt was always
an int64, but now that AuxInts are typed we can return int32 from Val
and Off and get rid of a several casts and now unnecessary range
checks.
This change:
- changes the Val and Off methods to return an int32 (from int64);
- adds Val64 and Off64 methods for convenience in the few remaining
places (in the ssa.go files) where Val and Off are stored in int64
fields;
- deletes makeValAndOff64, renames makeValAndOff32 to makeValAndOff
- deletes a few ValAndOff methods that are now unused;
- removes several validOff/validValAndOff check that will always
return true.
Passes:
GOARCH=amd64 gotip build -toolexec 'toolstash -cmp' -a std
GOARCH=386 gotip build -toolexec 'toolstash -cmp' -a std
GOARCH=s390x gotip build -toolexec 'toolstash -cmp' -a std
(the three GOARCHs with SSA rules files impacted by the change).
Change-Id: I2abbbf42188c798631b94d3a55ca44256f140be7
Reviewed-on: https://go-review.googlesource.com/c/go/+/299149
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add generic rule to rewrite the single-precision square root expression
with one single-precision instruction. The optimization will reduce two
times of precision converting between double-precision and single-precision.
On arm64 flatform.
previous:
FCVTSD F0, F0
FSQRTD F0, F0
FCVTDS F0, F0
optimized:
FSQRTS S0, S0
And this patch adds the test case to check the correctness.
This patch refers to CL 241877, contributed by Alice Xu
(dianhong.xu@arm.com)
Change-Id: I6de5d02281c693017ac4bd4c10963dd55989bd7e
Reviewed-on: https://go-review.googlesource.com/c/go/+/276873
Trust: fannie zhang <Fannie.Zhang@arm.com>
Run-TryBot: fannie zhang <Fannie.Zhang@arm.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
These are the the most common uses, and they reduce line noise.
I don't love adding new deprecated APIs,
but since they're trivial wrappers,
it'll be very easy to update them along with the rest.
No functional changes; passes toolstash-check.
Change-Id: I691a8175cfef9081180e463c63f326376af3f3a6
Reviewed-on: https://go-review.googlesource.com/c/go/+/296009
Trust: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
There are a handful of pre-computed magic symbols known by
package gc, and we need a place to store them.
If we keep them together, the need for type *ir.Name means that
package ir is the lowest package in the import hierarchy that they
can go in. And package ir needs gopkg for methodSymSuffix
(in a later CL), so they can't go any higher either, at least not all together.
So package ir it is.
Rather than dump them all into the top-level package ir
namespace, however, we introduce global structs, Syms, Pkgs, and Names,
and make the known symbols, packages, and names fields of those.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
add go.go:$ \
// Names holds known names. \
var Names struct{} \
\
// Syms holds known symbols. \
var Syms struct {} \
\
// Pkgs holds known packages. \
var Pkgs struct {} \
mv staticuint64s Names.Staticuint64s
mv zerobase Names.Zerobase
mv assertE2I Syms.AssertE2I
mv assertE2I2 Syms.AssertE2I2
mv assertI2I Syms.AssertI2I
mv assertI2I2 Syms.AssertI2I2
mv deferproc Syms.Deferproc
mv deferprocStack Syms.DeferprocStack
mv Deferreturn Syms.Deferreturn
mv Duffcopy Syms.Duffcopy
mv Duffzero Syms.Duffzero
mv gcWriteBarrier Syms.GCWriteBarrier
mv goschedguarded Syms.Goschedguarded
mv growslice Syms.Growslice
mv msanread Syms.Msanread
mv msanwrite Syms.Msanwrite
mv msanmove Syms.Msanmove
mv newobject Syms.Newobject
mv newproc Syms.Newproc
mv panicdivide Syms.Panicdivide
mv panicshift Syms.Panicshift
mv panicdottypeE Syms.PanicdottypeE
mv panicdottypeI Syms.PanicdottypeI
mv panicnildottype Syms.Panicnildottype
mv panicoverflow Syms.Panicoverflow
mv raceread Syms.Raceread
mv racereadrange Syms.Racereadrange
mv racewrite Syms.Racewrite
mv racewriterange Syms.Racewriterange
mv SigPanic Syms.SigPanic
mv typedmemclr Syms.Typedmemclr
mv typedmemmove Syms.Typedmemmove
mv Udiv Syms.Udiv
mv writeBarrier Syms.WriteBarrier
mv zerobaseSym Syms.Zerobase
mv arm64HasATOMICS Syms.ARM64HasATOMICS
mv armHasVFPv4 Syms.ARMHasVFPv4
mv x86HasFMA Syms.X86HasFMA
mv x86HasPOPCNT Syms.X86HasPOPCNT
mv x86HasSSE41 Syms.X86HasSSE41
mv WasmDiv Syms.WasmDiv
mv WasmMove Syms.WasmMove
mv WasmZero Syms.WasmZero
mv WasmTruncS Syms.WasmTruncS
mv WasmTruncU Syms.WasmTruncU
mv gopkg Pkgs.Go
mv itabpkg Pkgs.Itab
mv itablinkpkg Pkgs.Itablink
mv mappkg Pkgs.Map
mv msanpkg Pkgs.Msan
mv racepkg Pkgs.Race
mv Runtimepkg Pkgs.Runtime
mv trackpkg Pkgs.Track
mv unsafepkg Pkgs.Unsafe
mv Names Syms Pkgs symtab.go
mv symtab.go cmd/compile/internal/ir
'
Change-Id: Ic143862148569a3bcde8e70b26d75421aa2d00f3
Reviewed-on: https://go-review.googlesource.com/c/go/+/279235
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Move Flag, Debug, Ctxt, Exit, and error messages to
new package cmd/compile/internal/base.
These are the core functionality that everything in gc uses
and which otherwise prevent splitting any other code
out of gc into different packages.
A minor milestone: the compiler source code
no longer contains the string "yy".
[git-generate]
cd src/cmd/compile/internal/gc
rf '
mv atExit AtExit
mv Ctxt atExitFuncs AtExit Exit base.go
mv lineno Pos
mv linestr FmtPos
mv flusherrors FlushErrors
mv yyerror Errorf
mv yyerrorl ErrorfAt
mv yyerrorv ErrorfVers
mv noder.yyerrorpos noder.errorAt
mv Warnl WarnfAt
mv errorexit ErrorExit
mv base.go debug.go flag.go print.go cmd/compile/internal/base
'
: # update comments
sed -i '' 's/yyerrorl/ErrorfAt/g; s/yyerror/Errorf/g' *.go
: # bootstrap.go is not built by default so invisible to rf
sed -i '' 's/Fatalf/base.Fatalf/' bootstrap.go
goimports -w bootstrap.go
: # update cmd/dist to add internal/base
cd ../../../dist
sed -i '' '/internal.amd64/a\
"cmd/compile/internal/base",
' buildtool.go
gofmt -w buildtool.go
Change-Id: I59903c7084222d6eaee38823fd222159ba24a31a
Reviewed-on: https://go-review.googlesource.com/c/go/+/272250
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The debug table is not as haphazard as flags, but there are still
a few mismatches between command-line names and variable names.
This CL moves them all into a consistent home (var Debug, like var Flag).
Code updated automatically using the rf command below.
A followup CL will make a few manual cleanups, leaving this CL
completely automated and easier to regenerate during merge
conflicts.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
add main.go var Debug struct{}
mv Debug_append Debug.Append
mv Debug_checkptr Debug.Checkptr
mv Debug_closure Debug.Closure
mv Debug_compilelater Debug.CompileLater
mv disable_checknil Debug.DisableNil
mv debug_dclstack Debug.DclStack
mv Debug_gcprog Debug.GCProg
mv Debug_libfuzzer Debug.Libfuzzer
mv Debug_checknil Debug.Nil
mv Debug_panic Debug.Panic
mv Debug_slice Debug.Slice
mv Debug_typeassert Debug.TypeAssert
mv Debug_wb Debug.WB
mv Debug_export Debug.Export
mv Debug_pctab Debug.PCTab
mv Debug_locationlist Debug.LocationLists
mv Debug_typecheckinl Debug.TypecheckInl
mv Debug_gendwarfinl Debug.DwarfInl
mv Debug_softfloat Debug.SoftFloat
mv Debug_defer Debug.Defer
mv Debug_dumpptrs Debug.DumpPtrs
mv flag.go:/parse.-d/-1,/unknown.debug/+2 parseDebug
mv debugtab Debug parseDebug \
debugHelpHeader debugHelpFooter \
debug.go
# Remove //go:generate line copied from main.go
rm debug.go:/go:generate/-+
'
Change-Id: I625761ca5659be4052f7161a83baa00df75cca91
Reviewed-on: https://go-review.googlesource.com/c/go/+/272246
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Change-Id: Ibf68e663f29a5cb3b64a7d923c005c16da647769
Reviewed-on: https://go-review.googlesource.com/c/go/+/266537
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
My last 387 CL. So sad ... ... ... ... not!
Fixes#40255
Change-Id: I8d4ddb744b234b8adc735db2f7c3c7b6d8bbdfa4
Reviewed-on: https://go-review.googlesource.com/c/go/+/258957
Trust: Keith Randall <khr@golang.org>
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
We currently use two fields to store the targets of branches.
Some phases use p.To.Val, some use p.Pcond. Rewrite so that
every branch instruction uses p.To.Val.
p.From.Val is also used in rare instances.
Introduce a Pool link for use by arm/arm64, instead of
repurposing Pcond.
This is a cleanup CL in preparation for some stack frame CLs.
Change-Id: If8239177e4b1ea2bccd0608eb39553d23210d405
Reviewed-on: https://go-review.googlesource.com/c/go/+/251437
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This reverts CL 243318.
Reason for revert: Seems to be crashing some builders.
Change-Id: I2ffc59bc5535be60b884b281c8d0eff4647dc756
Reviewed-on: https://go-review.googlesource.com/c/go/+/251169
Reviewed-by: Bryan C. Mills <bcmills@google.com>
We currently use two fields to store the targets of branches.
Some phases use p.To.Val, some use p.Pcond. Rewrite so that
every branch instruction uses p.To.Val.
p.From.Val is also used in rare instances.
Introduce a Pool link for use by arm/arm64, instead of
repurposing Pcond.
This is a cleanup CL in preparation for some stack frame CLs.
Change-Id: I9055bf0a1d986aff421e47951a1dedc301c846f8
Reviewed-on: https://go-review.googlesource.com/c/go/+/243318
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The name of the function should mention division.
Eliminate double negatives from the comment describing it.
Change-Id: Icef1a5139b3a91b86acb930af97938f5160f7342
Reviewed-on: https://go-review.googlesource.com/c/go/+/217001
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Daniel Martí <mvdan@mvdan.cc>
This opcode was only used to mark unreachable code for plive to use.
plive now uses the SSA representation, so it knows locations are
unreachable because they are ends of Exit blocks. It doesn't need
these opcodes any more.
These opcodes actually used space in the binary, 2 bytes per undef
on x86 and more for other archs.
Makes the amd64 go binary 0.2% smaller.
Change-Id: I64c84c35db7c7949617a3a5830f09c8e5fcd2620
Reviewed-on: https://go-review.googlesource.com/c/go/+/171058
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
A few examples (for accessing a slice of length 3):
s[-1] runtime error: index out of range [-1]
s[3] runtime error: index out of range [3] with length 3
s[-1:0] runtime error: slice bounds out of range [-1:]
s[3:0] runtime error: slice bounds out of range [3:0]
s[3:-1] runtime error: slice bounds out of range [:-1]
s[3:4] runtime error: slice bounds out of range [:4] with capacity 3
s[0:3:4] runtime error: slice bounds out of range [::4] with capacity 3
Note that in cases where there are multiple things wrong with the
indexes (e.g. s[3:-1]), we report one of those errors kind of
arbitrarily, currently the rightmost one.
An exhaustive set of examples is in issue30116[u].out in the CL.
The message text has the same prefix as the old message text. That
leads to slightly awkward phrasing but hopefully minimizes the chance
that code depending on the error text will break.
Increases the size of the go binary by 0.5% (amd64). The panic functions
take arguments in registers in order to keep the size of the compiled code
as small as possible.
Fixes#30116
Change-Id: Idb99a827b7888822ca34c240eca87b7e44a04fdd
Reviewed-on: https://go-review.googlesource.com/c/go/+/161477
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
prove is able to find 94 occurrences in std cmd where a divisor
can't have the value -1. The change removes
the extraneous fix-up code for these cases.
Fixes#25239
Change-Id: Ic184de971f47cc57c702eb72805b8e291c14035d
Reviewed-on: https://go-review.googlesource.com/c/130215
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Add generic, 386 and amd64 specific ops and SSA rules for multiplication
with overflow and branching based on overflow flags. Use these to intrinsify
runtime/internal/math.MulUinptr.
On amd64
mul, overflow := math.MulUintptr(a, b)
if overflow {
is lowered to two instructions:
MULQ SI
JO 0x10ee35c
No codegen tests as codegen can not currently test unexported internal runtime
functions.
amd64:
name old time/op new time/op delta
MulUintptr/small 1.16ns ± 5% 0.88ns ± 6% -24.36% (p=0.000 n=19+20)
MulUintptr/large 10.7ns ± 1% 1.1ns ± 1% -89.28% (p=0.000 n=17+19)
Change-Id: If60739a86f820e5044d677276c21df90d3c7a86a
Reviewed-on: https://go-review.googlesource.com/c/141820
Run-TryBot: Martin Möhrmann <moehrmann@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The indexed MOVload and MOVstore have similar logic, and this CL
combine them together. The total size of pkg/linux_386/cmd/compile/
decreases about 4KB.
Change-Id: I06236a3542aaa3dfc113c49fe4c69d209e018dfe
Reviewed-on: https://go-review.googlesource.com/c/139958
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The ADDconstmodify has similar logic with other constmodify like
instructions. This CL optimize them to share code via fallthrough.
And the size of pkg/linux_386/cmd/compile/internal/x86.a decreases
about 0.3KB.
Change-Id: Ibdf06228afde875e8fe8e30851b50ca2be513dd9
Reviewed-on: https://go-review.googlesource.com/136398
Run-TryBot: Ben Shi <powerman1st@163.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Some *mem ops are loads, some are stores, some are modifications.
Replace mem->load for the loads.
Replace mem->store for the stores.
Replace mem->modify for the load-modify-stores.
The only semantic change in this CL is to mark
ADD(Q|L)constmodify (which used to be ADD(Q|L)constmem) as
both a read and a write, instead of just a write. This is arguably
a bug fix, but the bug isn't triggerable at the moment, see CL 112157.
Change-Id: Iccb45aea817b606adb2d712ff99b10ee28e4616a
Reviewed-on: https://go-review.googlesource.com/112159
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Currently, each architecture lowers OpConvert to an arch-specific
OpXXXconvert. This is silly because OpConvert means the same thing on
all architectures and is logically a no-op that exists only to keep
track of conversions to and from unsafe.Pointer. Furthermore, lowering
it makes it harder to recognize in other analyses, particularly
liveness analysis.
This CL eliminates the lowering of OpConvert, leaving it as the
generic op until code generation time.
The main complexity here is that we still need to register-allocate
OpConvert operations. Currently, each arch's lowered OpConvert
specifies all GP registers in its register mask. Ideally, OpConvert
wouldn't affect value homing at all, and we could just copy the home
of OpConvert's source, but this can potentially home an OpConvert in a
LocalSlot, which neither regalloc nor stackalloc expect. Rather than
try to disentangle this assumption from regalloc and stackalloc, we
continue to register-allocate OpConvert, but teach regalloc that
OpConvert can be allocated to any allocatable GP register.
For #24543.
Change-Id: I795a6aee5fd94d4444a7bafac3838a400c9f7bb6
Reviewed-on: https://go-review.googlesource.com/108496
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
When a neither of a conditional block's successors follows,
the block must end with a conditional branch followed by a
an unconditional branch. If the (conditional) branch is
"unlikely", invert it and swap successors to make it
likely instead.
This doesn't matter to most benchmarks on amd64, but in one
instance on amd64 it caused a 30% improvement, and it is
otherwise harmless. The problematic loop is
for i := 0; i < w; i++ {
if pw[i] != 0 {
return true
}
}
compiled under GOEXPERIMENT=preemptibleloops
This the very worst-case benchmark for that experiment.
Also in this CL is a commoning up of heavily-repeated
boilerplate, which made it much easier to see that the
changes were applied correctly. In the future this should
allow un-exporting of SSAGenState.Branches once the
boilerplate-replacement is done everywhere.
Change-Id: I0e5ded6eeb3ab1e3e0138e12d54c7e056bd99335
Reviewed-on: https://go-review.googlesource.com/104977
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
cmd/asm now supports three-operand form of IMUL,
so instead of using IMUL with resultInArg0, emit IMUL3 instruction.
This results in less redundant MOVs where SSA assigns
different registers to input[0] and dst arguments.
Note: these have exactly the same encoding when reg0=reg1:
IMUL3x $const, reg0, reg1
IMULx $const, reg
Two-operand IMULx is like a crippled IMUL3x, with dst fixed to input[0].
This is why we don't bother to generate IMULx for the case where
dst is the same as input[0].
Change-Id: I4becda475b3dffdd07b6fdf1c75bacc82af654e4
Reviewed-on: https://go-review.googlesource.com/99656
Run-TryBot: Iskander Sharipov <iskander.sharipov@intel.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Giovanni Bajo <rasky@develer.com>
Reviewed-by: Keith Randall <khr@golang.org>
Add a compiler intrinsic for getcallersp. So we are able to get
rid of the argument (not done in this CL).
Change-Id: Ic38fda1c694f918328659ab44654198fb116668d
Reviewed-on: https://go-review.googlesource.com/69350
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: David Chase <drchase@google.com>
First step towards removing the mandatory argument for
getcallerpc, which solves certain problems for the runtime.
This might also slightly improve performance.
Intrinsic enabled on 386, amd64, amd64p32,
runtime asm implementation removed on those architectures.
Now-superfluous argument remains in getcallerpc signature
(for a future CL; non-386/amd64 asm funcs ignore it).
Added getcallerpc to the "not a real function" test
in dcl.go, that story is a little odd with respect to
unexported functions but that is not this CL.
Fixes#17327.
Change-Id: I5df1ad91f27ee9ac1f0dd88fa48f1329d6306c3e
Reviewed-on: https://go-review.googlesource.com/31851
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Austin Clements <austin@google.com>
Went mainly for the ones that make no sense, such as the ones
mid-sentence or after commas.
Change-Id: Ie245d2c19cc7428a06295635cf6a9482ade25ff0
Reviewed-on: https://go-review.googlesource.com/57293
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
When package ssa was created, Type was in package gc.
To avoid circular dependencies, we used an interface (ssa.Type)
to represent type information in SSA.
In the Go 1.9 cycle, gri extricated the Type type from package gc.
As a result, we can now use it in package ssa.
Now, instead of package types depending on package ssa,
it is the other way.
This is a more sensible dependency tree,
and helps compiler performance a bit.
Though this is a big CL, most of the changes are
mechanical and uninteresting.
Interesting bits:
* Add new singleton globals to package types for the special
SSA types Memory, Void, Invalid, Flags, and Int128.
* Add two new Types, TSSA for the special types,
and TTUPLE, for SSA tuple types.
ssa.MakeTuple is now types.NewTuple.
* Move type comparison result constants CMPlt, CMPeq, and CMPgt
to package types.
* We had picked the name "types" in our rules for the handy
list of types provided by ssa.Config. That conflicted with
the types package name, so change it to "typ".
* Update the type comparison routine to handle tuples and special
types inline.
* Teach gc/fmt.go how to print special types.
* We can now eliminate ElemTypes in favor of just Elem,
and probably also some other duplicated Type methods
designed to return ssa.Type instead of *types.Type.
* The ssa tests were using their own dummy types,
and they were not particularly careful about types in general.
Of necessity, this CL switches them to use *types.Type;
it does not make them more type-accurate.
Unfortunately, using types.Type means initializing a bit
of the types universe.
This is prime for refactoring and improvement.
This shrinks ssa.Value; it now fits in a smaller size class
on 64 bit systems. This doesn't have a giant impact,
though, since most Values are preallocated in a chunk.
name old alloc/op new alloc/op delta
Template 37.9MB ± 0% 37.7MB ± 0% -0.57% (p=0.000 n=10+8)
Unicode 28.9MB ± 0% 28.7MB ± 0% -0.52% (p=0.000 n=10+10)
GoTypes 110MB ± 0% 109MB ± 0% -0.88% (p=0.000 n=10+10)
Flate 24.7MB ± 0% 24.6MB ± 0% -0.66% (p=0.000 n=10+10)
GoParser 31.1MB ± 0% 30.9MB ± 0% -0.61% (p=0.000 n=10+9)
Reflect 73.9MB ± 0% 73.4MB ± 0% -0.62% (p=0.000 n=10+8)
Tar 25.8MB ± 0% 25.6MB ± 0% -0.77% (p=0.000 n=9+10)
XML 41.2MB ± 0% 40.9MB ± 0% -0.80% (p=0.000 n=10+10)
[Geo mean] 40.5MB 40.3MB -0.68%
name old allocs/op new allocs/op delta
Template 385k ± 0% 386k ± 0% ~ (p=0.356 n=10+9)
Unicode 343k ± 1% 344k ± 0% ~ (p=0.481 n=10+10)
GoTypes 1.16M ± 0% 1.16M ± 0% -0.16% (p=0.004 n=10+10)
Flate 238k ± 1% 238k ± 1% ~ (p=0.853 n=10+10)
GoParser 320k ± 0% 320k ± 0% ~ (p=0.720 n=10+9)
Reflect 957k ± 0% 957k ± 0% ~ (p=0.460 n=10+8)
Tar 252k ± 0% 252k ± 0% ~ (p=0.133 n=9+10)
XML 400k ± 0% 400k ± 0% ~ (p=0.796 n=10+10)
[Geo mean] 428k 428k -0.01%
Removing all the interface calls helps non-trivially with CPU, though.
name old time/op new time/op delta
Template 178ms ± 4% 173ms ± 3% -2.90% (p=0.000 n=94+96)
Unicode 85.0ms ± 4% 83.9ms ± 4% -1.23% (p=0.000 n=96+96)
GoTypes 543ms ± 3% 528ms ± 3% -2.73% (p=0.000 n=98+96)
Flate 116ms ± 3% 113ms ± 4% -2.34% (p=0.000 n=96+99)
GoParser 144ms ± 3% 140ms ± 4% -2.80% (p=0.000 n=99+97)
Reflect 344ms ± 3% 334ms ± 4% -3.02% (p=0.000 n=100+99)
Tar 106ms ± 5% 103ms ± 4% -3.30% (p=0.000 n=98+94)
XML 198ms ± 5% 192ms ± 4% -2.88% (p=0.000 n=92+95)
[Geo mean] 178ms 173ms -2.65%
name old user-time/op new user-time/op delta
Template 229ms ± 5% 224ms ± 5% -2.36% (p=0.000 n=95+99)
Unicode 107ms ± 6% 106ms ± 5% -1.13% (p=0.001 n=93+95)
GoTypes 696ms ± 4% 679ms ± 4% -2.45% (p=0.000 n=97+99)
Flate 137ms ± 4% 134ms ± 5% -2.66% (p=0.000 n=99+96)
GoParser 176ms ± 5% 172ms ± 8% -2.27% (p=0.000 n=98+100)
Reflect 430ms ± 6% 411ms ± 5% -4.46% (p=0.000 n=100+92)
Tar 128ms ±13% 123ms ±13% -4.21% (p=0.000 n=100+100)
XML 239ms ± 6% 233ms ± 6% -2.50% (p=0.000 n=95+97)
[Geo mean] 220ms 213ms -2.76%
Change-Id: I15c7d6268347f8358e75066dfdbd77db24e8d0c1
Reviewed-on: https://go-review.googlesource.com/42145
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Type.Size and Type.Alignment are for the front end:
They calculate size and alignment if needed.
Type.MustSize and Type.MustAlignment are for the back end:
They call Fatal if size and alignment are not already calculated.
Most uses are of MustSize and MustAlignment,
but that's because the back end is newer,
and this API was added to support it.
This CL was mostly generated with sed and selective reversion.
The only mildly interesting bit is the change of the ssa.Type interface
and the supporting ssa dummy types.
Follow-up to review feedback on CL 41970.
Passes toolstash-check.
Change-Id: I0d9b9505e57453dae8fb6a236a07a7a02abd459e
Reviewed-on: https://go-review.googlesource.com/42016
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
The experiment "clobberdead" clobbers all pointer fields that the
compiler thinks are dead, just before and after every safepoint.
Useful for debugging the generation of live pointer bitmaps.
Helped find the following issues:
Update #15936
Update #16026
Update #16095
Update #18860
Change-Id: Id1d12f86845e3d93bae903d968b1eac61fc461f9
Reviewed-on: https://go-review.googlesource.com/23924
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
This is a straightforward refactoring,
to reduce the scope of upcoming changes.
The symbol size and AttrLocal=true was not
set universally, but it appears not to matter,
since toolstash -cmp is happy.
Passes toolstash-check -all.
Change-Id: I7f8392f939592d3a1bc6f61dec992f5661f42fca
Reviewed-on: https://go-review.googlesource.com/39791
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
It was simply a wrapper around Link.Lookup.
Unwrap everything.
CL prepared using eg with template:
package p
import "cmd/internal/obj"
func before(ctxt *obj.Link, name string, version int) *obj.LSym {
return obj.Linklookup(ctxt, name, version)
}
func after(ctxt *obj.Link, name string, version int) *obj.LSym {
return ctxt.Lookup(name, version)
}
Then one comment in cmd/asm/internal/asm/parse.go
was manually updated (and gofmt'ed!),
and func Linklookup deleted.
Passes toolstash-check (as a sanity measure).
Change-Id: Icc4d56b0b2b5c8888d3184c1898c48359ea1e638
Reviewed-on: https://go-review.googlesource.com/39715
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We don't need them any more since #15837 was fixed.
Fixes#19718
Change-Id: I13e46c62b321b2c9265f44c977b63bfb23163ca2
Reviewed-on: https://go-review.googlesource.com/38664
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This CL changes the GOARCH.Init functions to take gc.Thearch as a
parameter, which gc.Main supplies.
Additionally, the x86 backend is refactored to decide within Init
whether to use the 387 or SSE2 instruction generators, rather than for
each individual SSA Value/Block.
Passes toolstash-check -all.
Change-Id: Ie6305a6cd6f6ab4e89ecbb3cbbaf5ffd57057a24
Reviewed-on: https://go-review.googlesource.com/38301
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
