Add compiler support for emitting ABI wrappers by creating real IR as
opposed to introducing ABI aliases. At the moment these are "no-op"
wrappers in the sense that they make a simple call (using the existing
ABI) to their target. The assumption here is that once late call
expansion can handle both ABI0 and the "new" ABIInternal (register
version), it can expand the call to do the right thing.
Note that the runtime contains functions that do not strictly follow
the rules of the current Go ABI0; this has been handled in most cases
by treating these as ABIInternal instead (these changes have been made
in previous patches).
Generation of ABI wrappers (as opposed to ABI aliases) is currently
gated by GOEXPERIMENT=regabi -- wrapper generation is on by default if
GOEXPERIMENT=regabi is set and off otherwise (but can be turned on
using "-gcflags=all=-abiwrap -ldflags=-abiwrap"). Wrapper generation
currently only workd on AMD64; explicitly enabling wrapper for other
architectures (via the command line) is not supported.
Also in this patch are a few other command line options for debugging
(tracing and/or limiting wrapper creation). These will presumably go
away at some point.
Updates #27539, #40724.
Change-Id: I1ee3226fc15a3c32ca2087b8ef8e41dbe6df4a75
Reviewed-on: https://go-review.googlesource.com/c/go/+/270863
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Than McIntosh <thanm@google.com>
There are various global variables tracking the state of the
compilation. Collect them in a single global struct instead.
The struct definition is in package ir, but the struct itself is
still in package gc. It may eventually be threaded through the
code, but in the short term will end up in package typecheck.
Change-Id: I019db07aaedaed2c9b67dd45a4e138dc6028e54c
Reviewed-on: https://go-review.googlesource.com/c/go/+/279297
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
For globals, Name.Offset is used as a way to address a field within
a global during static initialization. This CL replaces that use with
a separate NameOffsetExpr (ONAMEOFFSET) node.
For locals, Name.Offset is the stack frame offset. This CL calls it
that (FrameOffset, SetFrameOffset).
Now there is no longer any use of Name.Offset or Name.SetOffset.
And now that copies of Names are not being made to change their
offsets, we can lock down use of ir.Copy on Names. The only
remaining uses are during inlining and in handling generic system
functions. At both those times you do want to create a new name
and that can be made explicit by calling the new CloneName method
instead. ir.Copy on a name now panics.
Passes buildall w/ toolstash -cmp.
Change-Id: I0b0a25b9d93aeff7cf4e4025ac53faec7dc8603b
Reviewed-on: https://go-review.googlesource.com/c/go/+/278914
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This commit adds exactly two "n := n.(*ir.Name)" statements, that are
each immediately preceded by a "case ir.ONAME:" clause in an n.Op()
switch. The rest of the changes are simply replacing "ir.Node" to
"*ir.Name" and removing now unnecessary "n.(*ir.Name)" type
assertions, exposing the latent typing details.
Passes buildall w/ toolstash -cmp.
Updates #42982.
Change-Id: I8ea3bbb7ddf0c7192245cafa49a19c0e7a556a39
Reviewed-on: https://go-review.googlesource.com/c/go/+/275791
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Russ Cox <rsc@golang.org>
Now that the only remaining ir.Node implementation that is stored
(directly) into ssa.Aux, we can rewrite all of the conversions between
ir.Node and ssa.Aux to use *ir.Name instead.
rf doesn't have a way to rewrite the type switch case clauses, so we
just use sed instead. There's only a handful, and they're the only
times that "case ir.Node" appears anyway.
The next CL will move the tag method declarations so that ir.Node no
longer implements ssa.Aux.
Passes buildall w/ toolstash -cmp.
Updates #42982.
[git-generate]
cd src/cmd/compile/internal
sed -i -e 's/case ir.Node/case *ir.Name/' gc/plive.go */ssa.go
cd ssa
rf '
ex . ../gc {
import "cmd/compile/internal/ir"
var v *Value
v.Aux.(ir.Node) -> v.Aux.(*ir.Name)
var n ir.Node
var asAux func(Aux)
strict n # only match ir.Node-typed expressions; not *ir.Name
implicit asAux # match implicit assignments to ssa.Aux
asAux(n) -> n.(*ir.Name)
}
'
Change-Id: I3206ef5f12a7cfa37c5fecc67a1ca02ea4d52b32
Reviewed-on: https://go-review.googlesource.com/c/go/+/275789
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Just clearing away some scaffolding artifacts from previous
refactorings.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
ex {
import "cmd/compile/internal/ir"
import "cmd/compile/internal/types"
var n *ir.Name; n.Name() -> n
var f *ir.Func; f.Func() -> f
var o types.Object
ir.AsNode(o).Sym() -> o.Sym()
ir.AsNode(o).Type() -> o.Type()
ir.AsNode(o).(*ir.Name) -> o.(*ir.Name)
ir.AsNode(o).(*ir.Func) -> o.(*ir.Func)
var x ir.Node
ir.AsNode(o) != x -> o != x
}
'
Change-Id: I946ec344bd7ee274900a392da53b95308ceaade4
Reviewed-on: https://go-review.googlesource.com/c/go/+/274592
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Now that we have specific types for ONAME and ODCLFUNC nodes
(*Name and *Func), use them throughout the compiler to be more
precise about what data is being operated on.
This is a somewhat large CL, but once you start applying the types
in a few places, you end up needing to apply them to many other
places to keep everything type-checking. A lot of code also melts
away as types are added.
Passes buildall w/ toolstash -cmp.
Change-Id: I21dd9b945d701c470332bac5394fca744a5b232d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274097
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Before this CL, an ONAME Node was represented by three structs
linked together: a node, a Name, and a Param. Previous CLs removed
OLABEL and OPACK from the set of nodes that knew about Name.
Now Name can be repurposed to *be* the ONAME Node implementation,
replacing three linked structs totaling 152+64+88 = 304 bytes (64-bit)
with a single 232-byte struct.
Many expressions in the code become simpler as well, without having
to use .Param. and sometimes even .Name().
(For a node n where n.Name() != nil, n.Name() == n.(*Name) now.)
Passes buildall w/ toolstash -cmp.
Change-Id: Ie719f1285c05623b9fd2faaa059e5b360a64b3be
Reviewed-on: https://go-review.googlesource.com/c/go/+/274094
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The plan is to introduce a Node interface that replaces the old *Node pointer-to-struct.
The previous CL defined an interface INode modeling a *Node.
This CL:
- Changes all references outside internal/ir to use INode,
along with many references inside internal/ir as well.
- Renames Node to node.
- Renames INode to Node
So now ir.Node is an interface implemented by *ir.node, which is otherwise inaccessible,
and the code outside package ir is now (clearly) using only the interface.
The usual rule is never to redefine an existing name with a new meaning,
so that old code that hasn't been updated gets a "unknown name" error
instead of more mysterious errors or silent misbehavior. That rule would
caution against replacing Node-the-struct with Node-the-interface,
as in this CL, because code that says *Node would now be using a pointer
to an interface. But this CL is being landed at the same time as another that
moves Node from gc to ir. So the net effect is to replace *gc.Node with ir.Node,
which does follow the rule: any lingering references to gc.Node will be told
it's gone, not silently start using pointers to interfaces. So the rule is followed
by the CL sequence, just not this specific CL.
Overall, the loss of inlining caused by using interfaces cuts the compiler speed
by about 6%, a not insignificant amount. However, as we convert the representation
to concrete structs that are not the giant Node over the next weeks, that speed
should come back as more of the compiler starts operating directly on concrete types
and the memory taken up by the graph of Nodes drops due to the more precise
structs. Honestly, I was expecting worse.
% benchstat bench.old bench.new
name old time/op new time/op delta
Template 168ms ± 4% 182ms ± 2% +8.34% (p=0.000 n=9+9)
Unicode 72.2ms ±10% 82.5ms ± 6% +14.38% (p=0.000 n=9+9)
GoTypes 563ms ± 8% 598ms ± 2% +6.14% (p=0.006 n=9+9)
Compiler 2.89s ± 4% 3.04s ± 2% +5.37% (p=0.000 n=10+9)
SSA 6.45s ± 4% 7.25s ± 5% +12.41% (p=0.000 n=9+10)
Flate 105ms ± 2% 115ms ± 1% +9.66% (p=0.000 n=10+8)
GoParser 144ms ±10% 152ms ± 2% +5.79% (p=0.011 n=9+8)
Reflect 345ms ± 9% 370ms ± 4% +7.28% (p=0.001 n=10+9)
Tar 149ms ± 9% 161ms ± 5% +8.05% (p=0.001 n=10+9)
XML 190ms ± 3% 209ms ± 2% +9.54% (p=0.000 n=9+8)
LinkCompiler 327ms ± 2% 325ms ± 2% ~ (p=0.382 n=8+8)
ExternalLinkCompiler 1.77s ± 4% 1.73s ± 6% ~ (p=0.113 n=9+10)
LinkWithoutDebugCompiler 214ms ± 4% 211ms ± 2% ~ (p=0.360 n=10+8)
StdCmd 14.8s ± 3% 15.9s ± 1% +6.98% (p=0.000 n=10+9)
[Geo mean] 480ms 510ms +6.31%
name old user-time/op new user-time/op delta
Template 223ms ± 3% 237ms ± 3% +6.16% (p=0.000 n=9+10)
Unicode 103ms ± 6% 113ms ± 3% +9.53% (p=0.000 n=9+9)
GoTypes 758ms ± 8% 800ms ± 2% +5.55% (p=0.003 n=10+9)
Compiler 3.95s ± 2% 4.12s ± 2% +4.34% (p=0.000 n=10+9)
SSA 9.43s ± 1% 9.74s ± 4% +3.25% (p=0.000 n=8+10)
Flate 132ms ± 2% 141ms ± 2% +6.89% (p=0.000 n=9+9)
GoParser 177ms ± 9% 183ms ± 4% ~ (p=0.050 n=9+9)
Reflect 467ms ±10% 495ms ± 7% +6.17% (p=0.029 n=10+10)
Tar 183ms ± 9% 197ms ± 5% +7.92% (p=0.001 n=10+10)
XML 249ms ± 5% 268ms ± 4% +7.82% (p=0.000 n=10+9)
LinkCompiler 544ms ± 5% 544ms ± 6% ~ (p=0.863 n=9+9)
ExternalLinkCompiler 1.79s ± 4% 1.75s ± 6% ~ (p=0.075 n=10+10)
LinkWithoutDebugCompiler 248ms ± 6% 246ms ± 2% ~ (p=0.965 n=10+8)
[Geo mean] 483ms 504ms +4.41%
[git-generate]
cd src/cmd/compile/internal/ir
: # We need to do the conversion in multiple steps, so we introduce
: # a temporary type alias that will start out meaning the pointer-to-struct
: # and then change to mean the interface.
rf '
mv Node OldNode
add node.go \
type Node = *OldNode
'
: # It should work to do this ex in ir, but it misses test files, due to a bug in rf.
: # Run the command in gc to handle gc's tests, and then again in ssa for ssa's tests.
cd ../gc
rf '
ex . ../arm ../riscv64 ../arm64 ../mips64 ../ppc64 ../mips ../wasm {
import "cmd/compile/internal/ir"
*ir.OldNode -> ir.Node
}
'
cd ../ssa
rf '
ex {
import "cmd/compile/internal/ir"
*ir.OldNode -> ir.Node
}
'
: # Back in ir, finish conversion clumsily with sed,
: # because type checking and circular aliases do not mix.
cd ../ir
sed -i '' '
/type Node = \*OldNode/d
s/\*OldNode/Node/g
s/^func (n Node)/func (n *OldNode)/
s/OldNode/node/g
s/type INode interface/type Node interface/
s/var _ INode = (Node)(nil)/var _ Node = (*node)(nil)/
' *.go
gofmt -w *.go
sed -i '' '
s/{Func{}, 136, 248}/{Func{}, 152, 280}/
s/{Name{}, 32, 56}/{Name{}, 44, 80}/
s/{Param{}, 24, 48}/{Param{}, 44, 88}/
s/{node{}, 76, 128}/{node{}, 88, 152}/
' sizeof_test.go
cd ../ssa
sed -i '' '
s/{LocalSlot{}, 28, 40}/{LocalSlot{}, 32, 48}/
' sizeof_test.go
cd ../gc
sed -i '' 's/\*ir.Node/ir.Node/' mkbuiltin.go
cd ../../../..
go install std cmd
cd cmd/compile
go test -u || go test -u
Change-Id: I196bbe3b648e4701662e4a2bada40bf155e2a553
Reviewed-on: https://go-review.googlesource.com/c/go/+/272935
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The cycle hacks existed because gc needed to import ssa
which need to know about gc.Node. But now that's ir.Node,
and there's no cycle anymore.
Don't know how much it matters but LocalSlot is now
one word shorter than before, because it holds a pointer
instead of an interface for the *Node. That won't last long.
Now that they're not necessary for interface satisfaction,
IsSynthetic and IsAutoTmp can move to top-level ir functions.
Change-Id: Ie511e93466cfa2b17d9a91afc4bd8d53fdb80453
Reviewed-on: https://go-review.googlesource.com/c/go/+/272931
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If we want to break up package gc at all, we will need to move
the compiler IR it defines into a separate package that can be
imported by packages that gc itself imports. This CL does that.
It also removes the TINT8 etc aliases so that all code is clear
about which package things are coming from.
This CL is automatically generated by the script below.
See the comments in the script for details about the changes.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
# These names were never fully qualified
# when the types package was added.
# Do it now, to avoid confusion about where they live.
inline -rm \
Txxx \
TINT8 \
TUINT8 \
TINT16 \
TUINT16 \
TINT32 \
TUINT32 \
TINT64 \
TUINT64 \
TINT \
TUINT \
TUINTPTR \
TCOMPLEX64 \
TCOMPLEX128 \
TFLOAT32 \
TFLOAT64 \
TBOOL \
TPTR \
TFUNC \
TSLICE \
TARRAY \
TSTRUCT \
TCHAN \
TMAP \
TINTER \
TFORW \
TANY \
TSTRING \
TUNSAFEPTR \
TIDEAL \
TNIL \
TBLANK \
TFUNCARGS \
TCHANARGS \
NTYPE \
BADWIDTH
# esc.go and escape.go do not need to be split.
# Append esc.go onto the end of escape.go.
mv esc.go escape.go
# Pull out the type format installation from func Main,
# so it can be carried into package ir.
mv Main:/Sconv.=/-0,/TypeLinkSym/-1 InstallTypeFormats
# Names that need to be exported for use by code left in gc.
mv Isconst IsConst
mv asNode AsNode
mv asNodes AsNodes
mv asTypesNode AsTypesNode
mv basicnames BasicTypeNames
mv builtinpkg BuiltinPkg
mv consttype ConstType
mv dumplist DumpList
mv fdumplist FDumpList
mv fmtMode FmtMode
mv goopnames OpNames
mv inspect Inspect
mv inspectList InspectList
mv localpkg LocalPkg
mv nblank BlankNode
mv numImport NumImport
mv opprec OpPrec
mv origSym OrigSym
mv stmtwithinit StmtWithInit
mv dump DumpAny
mv fdump FDumpAny
mv nod Nod
mv nodl NodAt
mv newname NewName
mv newnamel NewNameAt
mv assertRepresents AssertValidTypeForConst
mv represents ValidTypeForConst
mv nodlit NewLiteral
# Types and fields that need to be exported for use by gc.
mv nowritebarrierrecCallSym SymAndPos
mv SymAndPos.lineno SymAndPos.Pos
mv SymAndPos.target SymAndPos.Sym
mv Func.lsym Func.LSym
mv Func.setWBPos Func.SetWBPos
mv Func.numReturns Func.NumReturns
mv Func.numDefers Func.NumDefers
mv Func.nwbrCalls Func.NWBRCalls
# initLSym is an algorithm left behind in gc,
# not an operation on Func itself.
mv Func.initLSym initLSym
mv nodeQueue NodeQueue
mv NodeQueue.empty NodeQueue.Empty
mv NodeQueue.popLeft NodeQueue.PopLeft
mv NodeQueue.pushRight NodeQueue.PushRight
# Many methods on Node are actually algorithms that
# would apply to any node implementation.
# Those become plain functions.
mv Node.funcname FuncName
mv Node.isBlank IsBlank
mv Node.isGoConst isGoConst
mv Node.isNil IsNil
mv Node.isParamHeapCopy isParamHeapCopy
mv Node.isParamStackCopy isParamStackCopy
mv Node.isSimpleName isSimpleName
mv Node.mayBeShared MayBeShared
mv Node.pkgFuncName PkgFuncName
mv Node.backingArrayPtrLen backingArrayPtrLen
mv Node.isterminating isTermNode
mv Node.labeledControl labeledControl
mv Nodes.isterminating isTermNodes
mv Nodes.sigerr fmtSignature
mv Node.MethodName methodExprName
mv Node.MethodFunc methodExprFunc
mv Node.IsMethod IsMethod
# Every node will need to implement RawCopy;
# Copy and SepCopy algorithms will use it.
mv Node.rawcopy Node.RawCopy
mv Node.copy Copy
mv Node.sepcopy SepCopy
# Extract Node.Format method body into func FmtNode,
# but leave method wrapper behind.
mv Node.Format:0,$ FmtNode
# Formatting helpers that will apply to all node implementations.
mv Node.Line Line
mv Node.exprfmt exprFmt
mv Node.jconv jconvFmt
mv Node.modeString modeString
mv Node.nconv nconvFmt
mv Node.nodedump nodeDumpFmt
mv Node.nodefmt nodeFmt
mv Node.stmtfmt stmtFmt
# Constant support needed for code moving to ir.
mv okforconst OKForConst
mv vconv FmtConst
mv int64Val Int64Val
mv float64Val Float64Val
mv Node.ValueInterface ConstValue
# Organize code into files.
mv LocalPkg BuiltinPkg ir.go
mv NumImport InstallTypeFormats Line fmt.go
mv syntax.go Nod NodAt NewNameAt Class Pxxx PragmaFlag Nointerface SymAndPos \
AsNode AsTypesNode BlankNode OrigSym \
Node.SliceBounds Node.SetSliceBounds Op.IsSlice3 \
IsConst Node.Int64Val Node.CanInt64 Node.Uint64Val Node.BoolVal Node.StringVal \
Node.RawCopy SepCopy Copy \
IsNil IsBlank IsMethod \
Node.Typ Node.StorageClass node.go
mv ConstType ConstValue Int64Val Float64Val AssertValidTypeForConst ValidTypeForConst NewLiteral idealType OKForConst val.go
# Move files to new ir package.
mv bitset.go class_string.go dump.go fmt.go \
ir.go node.go op_string.go val.go \
sizeof_test.go cmd/compile/internal/ir
'
: # fix mkbuiltin.go to generate the changes made to builtin.go during rf
sed -i '' '
s/\[T/[types.T/g
s/\*Node/*ir.Node/g
/internal\/types/c \
fmt.Fprintln(&b, `import (`) \
fmt.Fprintln(&b, ` "cmd/compile/internal/ir"`) \
fmt.Fprintln(&b, ` "cmd/compile/internal/types"`) \
fmt.Fprintln(&b, `)`)
' mkbuiltin.go
gofmt -w mkbuiltin.go
: # update cmd/dist to add internal/ir
cd ../../../dist
sed -i '' '/compile.internal.gc/a\
"cmd/compile/internal/ir",
' buildtool.go
gofmt -w buildtool.go
: # update cmd/compile TestFormats
cd ../..
go install std cmd
cd cmd/compile
go test -u || go test # first one updates but fails; second passes
Change-Id: I5f7caf6b20629b51970279e81231a3574d5b51db
Reviewed-on: https://go-review.googlesource.com/c/go/+/273008
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Move Flag, Debug, Ctxt, Exit, and error messages to
new package cmd/compile/internal/base.
These are the core functionality that everything in gc uses
and which otherwise prevent splitting any other code
out of gc into different packages.
A minor milestone: the compiler source code
no longer contains the string "yy".
[git-generate]
cd src/cmd/compile/internal/gc
rf '
mv atExit AtExit
mv Ctxt atExitFuncs AtExit Exit base.go
mv lineno Pos
mv linestr FmtPos
mv flusherrors FlushErrors
mv yyerror Errorf
mv yyerrorl ErrorfAt
mv yyerrorv ErrorfVers
mv noder.yyerrorpos noder.errorAt
mv Warnl WarnfAt
mv errorexit ErrorExit
mv base.go debug.go flag.go print.go cmd/compile/internal/base
'
: # update comments
sed -i '' 's/yyerrorl/ErrorfAt/g; s/yyerror/Errorf/g' *.go
: # bootstrap.go is not built by default so invisible to rf
sed -i '' 's/Fatalf/base.Fatalf/' bootstrap.go
goimports -w bootstrap.go
: # update cmd/dist to add internal/base
cd ../../../dist
sed -i '' '/internal.amd64/a\
"cmd/compile/internal/base",
' buildtool.go
gofmt -w buildtool.go
Change-Id: I59903c7084222d6eaee38823fd222159ba24a31a
Reviewed-on: https://go-review.googlesource.com/c/go/+/272250
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The debug table is not as haphazard as flags, but there are still
a few mismatches between command-line names and variable names.
This CL moves them all into a consistent home (var Debug, like var Flag).
Code updated automatically using the rf command below.
A followup CL will make a few manual cleanups, leaving this CL
completely automated and easier to regenerate during merge
conflicts.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
add main.go var Debug struct{}
mv Debug_append Debug.Append
mv Debug_checkptr Debug.Checkptr
mv Debug_closure Debug.Closure
mv Debug_compilelater Debug.CompileLater
mv disable_checknil Debug.DisableNil
mv debug_dclstack Debug.DclStack
mv Debug_gcprog Debug.GCProg
mv Debug_libfuzzer Debug.Libfuzzer
mv Debug_checknil Debug.Nil
mv Debug_panic Debug.Panic
mv Debug_slice Debug.Slice
mv Debug_typeassert Debug.TypeAssert
mv Debug_wb Debug.WB
mv Debug_export Debug.Export
mv Debug_pctab Debug.PCTab
mv Debug_locationlist Debug.LocationLists
mv Debug_typecheckinl Debug.TypecheckInl
mv Debug_gendwarfinl Debug.DwarfInl
mv Debug_softfloat Debug.SoftFloat
mv Debug_defer Debug.Defer
mv Debug_dumpptrs Debug.DumpPtrs
mv flag.go:/parse.-d/-1,/unknown.debug/+2 parseDebug
mv debugtab Debug parseDebug \
debugHelpHeader debugHelpFooter \
debug.go
# Remove //go:generate line copied from main.go
rm debug.go:/go:generate/-+
'
Change-Id: I625761ca5659be4052f7161a83baa00df75cca91
Reviewed-on: https://go-review.googlesource.com/c/go/+/272246
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The original meaning of type Func was "extra fields factored out
of a few cases of type Node having to do with functions",
but those specific cases didn't necessarily have any relation.
A typical declared function is represented by an ODCLFUNC Node
at its declaration and an ONAME node at its uses, and both those
have a .Func field, but they are *different* Funcs.
Similarly, a closure is represented both by an OCLOSURE Node for
the value itself and an ODCLFUNC Node for the underlying function
implementing the closure. Those too have *different* Funcs,
and the Func.Closure field in one points to the other and vice versa.
This has led to no end of confusion over the years.
This CL elevates type Func to be the canonical identifier for
a given Go function.
This looks like a trivial CL but in fact is the result of a lot of
scaffolding and rewriting, discarded once the result was achieved, to
separate out the three different kinds of Func nodes into three
separate fields, limited in use to each specific Node type, to
understand which Func fields are used by which Node types and what the
possible overlaps are. There were a few overlaps, most notably around
closures, which led to more fields being added to type Func to keep
them separate even though there is now a single Func instead of two
different ones for each function.
A future CL can and should change Curfn to be a *Func instead of
a *Node, finally eliminating the confusion about whether Curfn
is an ODCLFUNC node (as it is most of the time) or an ONAME node
(as it is when type-checking an inlined function body).
Although sizeof_test.go makes it look like Func is growing by two
words, there are now half as many Funcs in a running compilation,
so the memory footprint has actually been reduced substantially.
Change-Id: I598bd96c95728093dc769a835d48f2154a406a61
Reviewed-on: https://go-review.googlesource.com/c/go/+/272253
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
We want to introduce a package cmd/compile/internal/base,
and these will shadow it at points where it is needed.
Change-Id: Ic936733fba1ccba8c2ca1fdedbd4d2989df4bbf4
Reviewed-on: https://go-review.googlesource.com/c/go/+/272249
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Prepare for factoring the error API out of this package by
cleaning it up. The doc comments use the intended new names,
which will be introduced in the next CL.
Change-Id: Ie4c8d4262422da32a9a9f750fda42c225b6b42a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/272248
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This creates space for a different kind of extension field
in LSym without making the struct any larger.
(There are many LSym, so we care about keeping the struct small.)
Change-Id: Ib16edb9e15f54c2a7351c8b875e19684058711e5
Reviewed-on: https://go-review.googlesource.com/c/go/+/243943
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
The linker prunes methods that are not directly reachable if the
receiver type is never converted to interface. Currently, this
"never" is too strong: it is invalidated even if the interface
conversion is in an unreachable function. This CL improves it by
only considering interface conversions in reachable code. To do
that, we introduce a marker relocation R_USEIFACE, which marks
the target symbol as UsedInIface if the source symbol is reached.
binary size before after
cmd/compile 18897528 18887400
cmd/go 13607372 13470652
Change-Id: I66c6b69eeff9ae02d84d2e6f2bc7f1b29dd53910
Reviewed-on: https://go-review.googlesource.com/c/go/+/256797
Trust: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
I think they are no longer experimental status. Might as well promote
them to permanent.
Change-Id: Id1259601b3dd2061dd60df86ee48080bfb575d2f
Reviewed-on: https://go-review.googlesource.com/c/go/+/249857
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
More ergonomic that way. Also change Haspointers to HasPointers
while we are here.
Change-Id: I45bedc294c1a8c2bd01dc14bd04615ae77555375
Reviewed-on: https://go-review.googlesource.com/c/go/+/249959
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Background: when compiling a function, it's possible that a local
variable will be optimized away, which could potentially degrade the
debugging experience if the compiler fails to emit DWARF information
for the variable's type. To mitigate this situation, the compiler
emits R_USETYPE relocations for the function's auto/param variables as
a signal to the linker to generate DWARF for the types in question,
even if the type is not specifically attached to a DWARF param or var.
This patch change the logic in the compiler to avoid emitting a
R_USETYPE relocation if the type in question is already referenced by
a concrete DWARF param or auto record. This cuts down on the amount of
work the linker has to do, also makes object files a bit smaller on
average (about 1% for the runtime package).
Change-Id: I4d24da458d0658edf90c5dca0bf21d5ddc3961d8
Reviewed-on: https://go-review.googlesource.com/c/go/+/234837
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
When the concurrent back end is not enabled, it is possible to have a
scenario where: we compile a specific inlinable non-pointer-receiver
method T.M, then at some point later on in the compilation we visit a
type that triggers generation of a pointer-receiver wrapper (*T).M,
which then results in an inline of T.M into (*T).M. This introduces
subtle differences in the DWARF as compared with when the concurrent
back end is enabled (in the concurrent case, by the time we run the
SSA back end on T.M is is marked as being inlined, whereas in the
non-current case it is not marked inlined).
As a fix, at the point where we would normally compile a given
function in the xtop list right away, if the function is a method AND
is inlinable AND hasn't been inlined, then delay its compilation until
compileFunctions (so as to make sure that when we do compile it, all
possible inlining has been complete). In addition, make sure that
the abstract function symbol for the inlined function gets recorded
correctly.
Fixes#38068.
Change-Id: I57410ab5658bd4ee5b4b80750518e9b20fd6ba52
Reviewed-on: https://go-review.googlesource.com/c/go/+/234178
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Keith Randall <khr@golang.org>
In golang.org/cl/171464, we cleaned up generation of .stkobj linker
symbols, but we couldn't figure out why a similar cleanup to
.args_stackmap linker symbols caused problems.
The issue is that we only need/want to generate .args_stackmap for
functions that are implemented in assembly in the same package. When
"pulling" a function from another package via //go:linkname, we can
safely skip emitting .args_stackmap, because compiling that package
will have generated it, if necessary.
Fixes#31615.
Change-Id: If8680aa7dd5b4e8f268b6b032d746f1b8536c867
Reviewed-on: https://go-review.googlesource.com/c/go/+/223238
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Keith Randall <khr@golang.org>
Fixes the declaration line reported in the DW_AT_decl_line for
variables captured in a closure.
Fixes#36542
Change-Id: I228d32b57121fd62c4615c2ef71a6e8da616a1e2
Reviewed-on: https://go-review.googlesource.com/c/go/+/214637
Reviewed-by: Heschi Kreinick <heschi@google.com>
Run-TryBot: Heschi Kreinick <heschi@google.com>
The IsClosureVar, IsOutputParamHeapAddr, Assigned, Addrtaken,
InlFormal, and InlLocal flags are only interesting for ONAME nodes, so
it's better to set these flags on Name.flags instead of Node.flags.
Two caveats though:
1. Previously, we would set Assigned and Addrtaken on the entire
expression tree involved in an assignment or addressing operation.
However, the rest of the compiler only actually cares about knowing
whether the underlying ONAME (if any) was assigned/addressed.
2. This actually requires bumping Name.flags from bitset8 to bitset16,
whereas it doesn't allow shrinking Node.flags any. However, Name has
some trailing padding bytes, so expanding Name.flags doesn't cost any
memory.
Passes toolstash-check.
Change-Id: I7775d713566a38d5b9723360b1659b79391744c2
Reviewed-on: https://go-review.googlesource.com/c/go/+/200898
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Don't write Autom records when writing a function to the object file;
we no longer need them in the linker for DWARF processing. So as to
keep the object file format unchanged, write out a zero-length list of
automs to the object, as opposed to removing all references.
Updates #34554.
Change-Id: I42a1d67207ea7114ae4f3a315cf37effba57f190
Reviewed-on: https://go-review.googlesource.com/c/go/+/197499
Reviewed-by: Jeremy Faller <jeremy@golang.org>
During DWARF processing, keep track of the go type symbols for types
directly or indirectly referenced by auto variables in a function,
and add a set of dummy R_USETYPE relocations to the function's DWARF
subprogram DIE symbol.
This change is not useful on its own, but is part of a series of
changes intended to clean up handling of autom's in the compiler
and linker.
Updates #34554.
Change-Id: I974afa9b7092aa5dba808f74e00aa931249d6fe9
Reviewed-on: https://go-review.googlesource.com/c/go/+/197497
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
CL 14870 added internal/race to factor out duplicated race thunks,
we should use it.
No signification changes in compile time and compile binary size.
Change-Id: I786af44dd5bb0f4ab6709432eeb603f27a5b6c63
Reviewed-on: https://go-review.googlesource.com/c/go/+/178118
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We compile package sort as part of the compiler bootstrap,
to make sure the compiler uses a consistent sort algorithm
no matter what version of Go it is compiled against.
(This matters for elements that compare "equal" but are distinguishable.)
Package sort was compiled in such a way as to disallow
sort.Slice entirely during bootstrap (at least with some compilers),
while cmd/internal/obj was compiled in such a way as to
make obj.SortSlice available to all compilers, precisely because
sort.Slice was not. This is all highly confusing.
Simplify by making sort.Slice available all the time.
Followup to CL 169137 and #30440
(and also CL 40114 and CL 73951).
Change-Id: I127f4e02d6c71392805d256c3a90ef7c51f9ba0c
Reviewed-on: https://go-review.googlesource.com/c/go/+/174525
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Stack object generation code was always using the local package name
for its symbol. Normally that doesn't matter, as we usually only
compile functions in the local package. But for wrappers, the compiler
generates functions which live in other packages. When there are two
other packages with identical functions to wrap, the same name appears
twice, and the compiler goes boom.
Fixes#31252
Change-Id: I7026eebabe562cb159b8b6046cf656afd336ba25
Reviewed-on: https://go-review.googlesource.com/c/go/+/171464
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
When generating DWARF inline info records, the post-SSA code looks
through the original "pre-inline" dcl list for the function so as to
handle situations where formal params are promoted or optimized away.
This code was not properly handling the case where an output parameter
was promoted to the heap -- in this case the param node is converted
in place from class PPARAMOUT to class PAUTOHEAP. This caused
inconsistencies later on, since the variable entry in the abstract
subprogram DIE wound up as a local and not an output parameter.
Fixes#30908.
Change-Id: Ia70b89f0cf7f9b16246d95df17ad6e307228b8c7
Reviewed-on: https://go-review.googlesource.com/c/go/+/168818
Reviewed-by: Cherry Zhang <cherryyz@google.com>
If a for loop has a simple condition and begins with a simple
"if x { break; }"; we can simply add "!x" to the loop's condition.
While at it, simplify a few assignments to use the common pattern
"x := staticDefault; if cond { x = otherValue(); }".
Finally, simplify a couple of var declarations.
Change-Id: I413982c6abd32905adc85a9a666cb3819139c19f
Reviewed-on: https://go-review.googlesource.com/c/go/+/165342
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
They can't be used, so we don't need code generated for them. We just
need to report errors in their bodies.
The compiler currently has a bunch of special cases sprinkled about
for "_" functions, because we never generate a linker symbol for them.
Instead, abort compilation earlier so we never reach any of that
special-case code.
Fixes#29870
Change-Id: I3530c9c353deabcf75ce9072c0b740e992349ee5
Reviewed-on: https://go-review.googlesource.com/c/158845
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
They can't be used, so we don't need code generated for them. We just
need to report errors in their bodies.
This is the minimal CL for 1.12. For 1.13, CL 158845 will remove
a bunch of special cases sprinkled about the compiler to handle "_"
functions, which should (after this CL) be unnecessary.
Update #29870
Change-Id: Iaa1c194bd0017dffdce86589fe2d36726ee83c13
Reviewed-on: https://go-review.googlesource.com/c/158820
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
If someone takes a pointer to a zero-sized stack variable, it can
be incorrectly interpreted as a pointer to the next object in the
stack frame. To avoid this, add some padding after zero-sized variables.
We only need to pad if the next variable in memory (which is the
previous variable in the order in which we allocate variables to the
stack frame) has pointers. If the next variable has no pointers, it
won't hurt to have a pointer to it.
Because we allocate all pointer-containing variables before all
non-pointer-containing variables, we should only have to pad once per
frame.
Fixes#24993
Change-Id: Ife561cdfdf964fdbf69af03ae6ba97d004e6193c
Reviewed-on: https://go-review.googlesource.com/c/155698
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This case was missed entirely and caused such params to be
unprintable. This change gives them stack addresses
for the entire function (which is correct).
Change-Id: Ia4f706450219e48bce65b6395d3d9792df142fb5
Reviewed-on: https://go-review.googlesource.com/c/150657
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
This implements compiler and linker support for separating the
function calling ABI into two ABIs: a stable and an internal ABI. At
the moment, the two ABIs are identical, but we'll be able to evolve
the internal ABI without breaking existing assembly code that depends
on the stable ABI for calling to and from Go.
The Go compiler generates internal ABI symbols for all Go functions.
It uses the symabis information produced by the assembler to create
ABI wrappers whenever it encounters a body-less Go function that's
defined in assembly or a Go function that's referenced from assembly.
Since the two ABIs are currently identical, for the moment this is
implemented using "ABI alias" symbols, which are just forwarding
references to the native ABI symbol for a function. This way there's
no actual code involved in the ABI wrapper, which is good because
we're not deriving any benefit from it right now. Once the ABIs
diverge, we can eliminate ABI aliases.
The linker represents these different ABIs internally as different
versions of the same symbol. This way, the linker keeps us honest,
since every symbol definition and reference also specifies its
version. The linker is responsible for resolving ABI aliases.
Fixes#27539.
Change-Id: I197c52ec9f8fc435db8f7a4259029b20f6d65e95
Reviewed-on: https://go-review.googlesource.com/c/147160
Run-TryBot: Austin Clements <austin@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
Rework how the compiler+runtime handles stack-allocated variables
whose address is taken.
Direct references to such variables work as before. References through
pointers, however, use a new mechanism. The new mechanism is more
precise than the old "ambiguously live" mechanism. It computes liveness
at runtime based on the actual references among objects on the stack.
Each function records all of its address-taken objects in a FUNCDATA.
These are called "stack objects". The runtime then uses that
information while scanning a stack to find all of the stack objects on
a stack. It then does a mark phase on the stack objects, using all the
pointers found on the stack (and ancillary structures, like defer
records) as the root set. Only stack objects which are found to be
live during this mark phase will be scanned and thus retain any heap
objects they point to.
A subsequent CL will remove all the "ambiguously live" logic from
the compiler, so that the stack object tracing will be required.
For this CL, the stack tracing is all redundant with the current
ambiguously live logic.
Update #22350
Change-Id: Ide19f1f71a5b6ec8c4d54f8f66f0e9a98344772f
Reviewed-on: https://go-review.googlesource.com/c/134155
Reviewed-by: Austin Clements <austin@google.com>
When generation DWARF inline info records, the current implementation
includes a sorting pass that reorders a subprogram's child variable
DIEs based on class (param/auto) and name. This sorting is no longer
needed, and can cause problems for a debugger (if we want to use the
DWARF info for creating a call to an optimized function); this patch
removes it.
Ordering of DWARF subprogram variable/parameter DIEs is still
deterministic with this change, since it is keyed off the order in
which vars appear in the pre-inlining function "Dcl" list.
Updates #27039
Change-Id: I3b91290d11bb3b9b36fb61271d80b801841401ee
Reviewed-on: https://go-review.googlesource.com/131895
Reviewed-by: Heschi Kreinick <heschi@google.com>
The stack frame includes the callee args section. At the point where
we were checking the frame size, that part of the frame had not been
computed yet. Move the check later so we can include the callee args size.
Fixes#20780
Update #25507
Change-Id: Iab97cb89b3a24f8ca19b9123ef2a111d6850c3fe
Reviewed-on: https://go-review.googlesource.com/115195
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Extend stack frame limit of 1GB to include large argument/return areas.
Argument/return areas are part of the parent frame, not the frame itself,
so they need to be handled separately.
Fixes#25507.
Change-Id: I309298a58faee3e7c1dac80bd2f1166c82460087
Reviewed-on: https://go-review.googlesource.com/115036
Run-TryBot: Keith Randall <khr@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Inl, Inldcl, and InlCost are only applicable to functions with bodies
that can be inlined, so pull them out into a separate Inline type to
make understanding them easier.
A side benefit is that we can check if a function can be inlined by
just checking if n.Func.Inl is non-nil, which simplifies handling of
empty function bodies.
While here, remove some unnecessary Curfn twiddling, and make imported
functions use Inl.Dcl instead of Func.Dcl for consistency for local
functions.
Passes toolstash-check.
Change-Id: Ifd4a80349d85d9e8e4484952b38ec4a63182e81f
Reviewed-on: https://go-review.googlesource.com/104756
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
To improve debugging, instructions should be annotated with
DWARF is_stmt. The DWARF default before was is_stmt=1, and
to remove "jumpy" stepping the optimizer was tagging
instructions with a no-position position, which interferes
with the accuracy of profiling information. This allows
that to be corrected, and also allows more "jumpy" positions
to be annotated with is_stmt=0 (these changes were not made
for 1.10 because of worries about further messing up
profiling).
The is_stmt values are placed in a pc-encoded table and
passed through a symbol derived from the name of the
function and processed in the linker alongside its
processing of each function's pc/line tables.
The only change in binary size is in the .debug_line tables
measured with "objdump -h --section=.debug_line go1.test"
For go1.test, these are 2614 bytes larger,
or 0.72% of the size of .debug_line,
or 0.025% of the file size.
This will increase in proportion to how much the is_stmt
flag is used (toggled).
Change-Id: Ic1f1aeccff44591ad0494d29e1a0202a3c506a7a
Reviewed-on: https://go-review.googlesource.com/93664
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Remove a couple of unnecessary var declarations, an unused sort.Sort
type, and simplify a range by using the two-name variant.
Change-Id: Ia251f634db0bfbe8b1d553b8659272ddbd13b2c3
Reviewed-on: https://go-review.googlesource.com/102336
Run-TryBot: Daniel Martí <mvdan@mvdan.cc>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
As reported by unparam.
Passes toolstash -cmp on std cmd.
Change-Id: I55473e1eed096ed1c3e431aed2cbf0b6b5444b91
Reviewed-on: https://go-review.googlesource.com/97895
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
