Updates #15462
Automatic refactor with sed -e.
Replace all oconv(op, 0) to string conversion with the raw op value
which fmt's %v verb can print directly.
The remaining oconv(op, FmtSharp) will be replaced with op.GoString and
%#v in the next CL.
Change-Id: I5e2f7ee0bd35caa65c6dd6cb1a866b5e4519e641
Reviewed-on: https://go-review.googlesource.com/22499
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Updates #15462
Semi automatic change with gofmt -r and hand fixups for callers outside
internal/gc.
All the uses of gc.Oconv outside cmd/compile/internal/gc were for the
Oconv(op, 0) form, which is already handled the Op.String method.
Replace the use of gc.Oconv(op, 0) with op itself, which will call
Op.String via the %v or %s verb. Unexport Oconv.
Change-Id: I84da2a2e4381b35f52efce427b2d6a3bccdf2526
Reviewed-on: https://go-review.googlesource.com/22496
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Change-Id: I91873aaebf79bdf1c00d38aacc1a1fb8d79656a7
Reviewed-on: https://go-review.googlesource.com/21433
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Replace isideal(t) with t.IsUntyped().
Replace Istype(t, k) with t.IsKind(k).
Replace isnilinter(t) with t.IsEmptyInterface().
Also replace a lot of t.IsKind(TFOO) with t.IsFoo().
Replacements prepared mechanically with gofmt -w -r.
Passes toolstash -cmp.
Change-Id: Iba48058f3cc863e15af14277b5ff5e729e67e043
Reviewed-on: https://go-review.googlesource.com/21424
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Replace Isfixedarray, Isslice, and Isinter with the IsArray, IsSlice,
and IsInterface methods added for SSA. Rewrite performed mechanically
using gofmt -w -r "Isfoo(t) -> t.IsFoo()".
Because the IsFoo methods panic when given a nil pointer, a handful of
call sites had to be modified to check for nil Type values. These
aren't strictly necessary, because nil Type values should only occur
in invalid Go source programs, so it would be okay if we panicked on
them and gave up type checking the rest of the package. However, there
are a couple regress tests that expect we continue, so add checks to
keep those tests passing. (See #15029.)
Passes toolstash -cmp.
Change-Id: I511c6ac4cfdf3f9cbdb3e52a5fa91b6d09d82f80
Reviewed-on: https://go-review.googlesource.com/21336
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Escape analysis has a hard time with tree-like
structures (see #13493 and #14858).
This is unlikely to change.
As a result, when invoking a function that accepts
a **Node parameter, we usually allocate a *Node
on the heap. This happens a whole lot.
This CL changes functions from taking a **Node
to acting more like append: It both modifies
the input and returns a replacement for it.
Because of the cascading nature of escape analysis,
in order to get the benefits, I had to modify
almost all such functions. The remaining functions
are in racewalk and the backend. I would be happy
to update them as well in a separate CL.
This CL was created by manually updating the
function signatures and the directly impacted
bits of code. The callsites were then automatically
updated using a bespoke script:
https://gist.github.com/josharian/046b1be7aceae244de39
For ease of reviewing and future understanding,
this CL is also broken down into four CLs,
mailed separately, which show the manual
and the automated changes separately.
They are CLs 20990, 20991, 20992, and 20993.
Passes toolstash -cmp.
name old time/op new time/op delta
Template 335ms ± 5% 324ms ± 5% -3.35% (p=0.000 n=23+24)
Unicode 176ms ± 9% 165ms ± 6% -6.12% (p=0.000 n=23+24)
GoTypes 1.10s ± 4% 1.07s ± 2% -2.77% (p=0.000 n=24+24)
Compiler 5.31s ± 3% 5.15s ± 3% -2.95% (p=0.000 n=24+24)
MakeBash 41.6s ± 1% 41.7s ± 2% ~ (p=0.586 n=23+23)
name old alloc/op new alloc/op delta
Template 63.3MB ± 0% 62.4MB ± 0% -1.36% (p=0.000 n=25+23)
Unicode 42.4MB ± 0% 41.6MB ± 0% -1.99% (p=0.000 n=24+25)
GoTypes 220MB ± 0% 217MB ± 0% -1.11% (p=0.000 n=25+25)
Compiler 994MB ± 0% 973MB ± 0% -2.08% (p=0.000 n=24+25)
name old allocs/op new allocs/op delta
Template 681k ± 0% 574k ± 0% -15.71% (p=0.000 n=24+25)
Unicode 518k ± 0% 413k ± 0% -20.34% (p=0.000 n=25+24)
GoTypes 2.08M ± 0% 1.78M ± 0% -14.62% (p=0.000 n=25+25)
Compiler 9.26M ± 0% 7.64M ± 0% -17.48% (p=0.000 n=25+25)
name old text-bytes new text-bytes delta
HelloSize 578k ± 0% 578k ± 0% ~ (all samples are equal)
CmdGoSize 6.46M ± 0% 6.46M ± 0% ~ (all samples are equal)
name old data-bytes new data-bytes delta
HelloSize 128k ± 0% 128k ± 0% ~ (all samples are equal)
CmdGoSize 281k ± 0% 281k ± 0% ~ (all samples are equal)
name old exe-bytes new exe-bytes delta
HelloSize 921k ± 0% 921k ± 0% ~ (all samples are equal)
CmdGoSize 9.86M ± 0% 9.86M ± 0% ~ (all samples are equal)
Change-Id: I277d95bd56d51c166ef7f560647aeaa092f3f475
Reviewed-on: https://go-review.googlesource.com/20959
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Also give them more idiomatic Go names. Adding godocs is outside the
scope of this CL. (Besides, the method names almost all directly
parallel an underlying math/big.Int or math/big.Float method.)
CL prepared mechanically with sed (for rewriting mpint.go/mpfloat.go)
and gofmt (for rewriting call sites).
Passes toolstash -cmp.
Change-Id: Id76f4aee476ba740f48db33162463e7978c2083d
Reviewed-on: https://go-review.googlesource.com/20909
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Robert Griesemer <gri@golang.org>
The Node type ODOT and its variants all represent a selector, with a
simple name to the right of the dot. Before this change this was
represented by using an ONAME Node in the Right field. This ONAME node
served no useful purpose. This CL changes these Node types to store the
symbol in the Sym field instead, thus not requiring allocating a Node
for each selector.
When compiling x/tools/go/types this CL eliminates nearly 5000 calls to
newname and reduces the total number of Nodes allocated by about 6.6%.
It seems to cut compilation time by 1 to 2 percent.
Getting this right was somewhat subtle, and I added two dubious changes
to produce the exact same output as before. One is to ishairy in
inl.go: the ONAME node increased the cost of ODOT and friends by 1, and
I retained that, although really ODOT is not more expensive than any
other node. The other is to varexpr in walk.go: because the ONAME in
the Right field of an ODOT has no class, varexpr would always return
false for an ODOT, although in fact for some ODOT's it seemingly ought
to return true; I added an && false for now. I will send separate CLs,
that will break toolstash -cmp, to clean these up.
This CL passes toolstash -cmp.
Change-Id: I4af8a10cc59078c436130ce472f25abc3a9b2f80
Reviewed-on: https://go-review.googlesource.com/20890
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
The obj.Fmt* values are only used by gc/fmt.go, so just move them
there. Also, add comments documenting the correspondance between
FmtFoo names and their flag characters to make understanding the
existing documentation slightly less confusing.
While here, add a new FmtFlag named type to represent these values.
Change-Id: I9631214b892557d094823f1ac575d0c43a84007b
Reviewed-on: https://go-review.googlesource.com/20717
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Mix in several other minor cleanups, including adding some new methods
to Nodes: Index, Addr, SetIndex, SetNodes.
Passes toolstash -cmp.
Update #14473.
Change-Id: I8bd4ae3fde7c5e20ba66e7dd1654fbc70c3ddeb8
Reviewed-on: https://go-review.googlesource.com/20491
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This CL was automatically generated using a special-purpose AST
rewriting tool, followed by manual editing to put some comments back in
the right places and fix some bad line breaks.
The result is not perfect but it's a big step toward getting back to
sanity, and because it was automatically generated there is a decent
chance that it is correct.
Passes toolstash -cmp.
Update #14473.
Change-Id: I01c09078a6d78e2b008bc304d744b79469a38d3d
Reviewed-on: https://go-review.googlesource.com/20440
Reviewed-by: David Crawshaw <crawshaw@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Eliminates type conversions in a bunch of Oconv(int(n.Op), ...) calls.
Notably, this identified a misuse of Oconv in amd64/gsubr.go to try to
print an assembly instruction op instead of a compiler node op.
Change-Id: I93b5aa49fe14a5eaf868b05426d3b8cd8ab52bc5
Reviewed-on: https://go-review.googlesource.com/20298
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
I tried to write a program to convert *NodeList to Node, but ran into
too many problem cases. I'm backing off and trying a more iterative
approach using interfaces.
This CL adds an interface for iteration over either a *NodeList or a
Nodes. I changed typechecklist to use it, to show how it works. After
NodeList is eliminated, we can change the typechecklist parameter type
to Nodes.
Passes toolstash -cmp.
Change-Id: I5c7593714b020d20868b99151b1e7cadbbdbc397
Reviewed-on: https://go-review.googlesource.com/20190
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
- removed lots of unnecessary int(x) casts
- removed parserline() - was inconsistently used anyway
- minor simplifications in dcl.go
Change-Id: Ibf7de679eea528a31c9692ef1c76a1d9b3239211
Reviewed-on: https://go-review.googlesource.com/20131
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
These functions are really simple, the overhead of calling
them (in both time and code size) is larger than the inlined versions.
Reorganize how the nil case in a type switch is handled, as we have
to check for nil explicitly now anyway.
Saves about 0.8% in the binary size of the go tool.
Change-Id: I8501b62d72fde43650b79f52b5f699f1fbd0e7e7
Reviewed-on: https://go-review.googlesource.com/19814
Run-TryBot: Keith Randall <khr@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
Inlined the last occurrence of stringsCompare into exprcmp.
Passes go build -a -toolexec 'toolstash -cmp' std cmd.
Change-Id: I8fd99e3fbffc84283cc269368595cba950533066
Reviewed-on: https://go-review.googlesource.com/14872
Reviewed-by: Dave Cheney <dave@cheney.net>
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Found with https://github.com/remyoudompheng/go-misc/deadcode:
deadcode: walk.go:2228:1: applywritebarrier_bv is unused
deadcode: subr.go:355:1: gethunk is unused
deadcode: subr.go:1991:1: localexpr is unused
deadcode: dcl.go:82:1: poptodcl is unused
deadcode: swt.go:810:1: dumpcase is unused
deadcode: esc.go:251:1: satAdd8 is unused
deadcode: esc.go:387:1: outputsPerTag is unused
deadcode: obj.go:190:1: duint64 is unused
deadcode: obj.go:287:1: dstringptr is unused
deadcode: plive.go:95:1: xmalloc is unused
deadcode: plive.go:119:1: freeblock is unused
followed by
deadcode: go.go:633:1: hunk is unused
deadcode: go.go:635:1: nhunk is unused
deadcode: go.go:637:1: thunk is unused
after 'gethunk' was removed.
Some dead code in bv.go, mparith3.go, and dcl.go was left as is.
Passes go build -a -toolexec 'toolstash -cmp' std cmd.
Change-Id: Ia63519adedc8650d7095572ddd454fd923d3204d
Reviewed-on: https://go-review.googlesource.com/14610
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Run-TryBot: Ian Lance Taylor <iant@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Convert Type.Broke from a uint8 to a boolean
This change passes go build -toolexec 'toolstash -cmp' -a std.
Change-Id: I44e7548c71b00467e36576bdf62933c42555a21a
Reviewed-on: https://go-review.googlesource.com/14307
Run-TryBot: Dave Cheney <dave@cheney.net>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Håvard Haugen <havard.haugen@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
This helps vet see a real issue:
cmd/internal/gc$ go vet
gen.go:1223: unreachable code
Fixes#12106.
Change-Id: I720868b07ae6b6d5a4dc6b238baa8c9c889da6d8
Reviewed-on: https://go-review.googlesource.com/14083
Reviewed-by: Minux Ma <minux@golang.org>
Run-TryBot: Minux Ma <minux@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Fixes arm64 builder crash.
The bug is possible on all architectures; you just have to get lucky
and hit a preemption or a stack growth on entry to assertE2I2.
The test stacks the deck.
Change-Id: I8419da909b06249b1ad15830cbb64e386b6aa5f6
Reviewed-on: https://go-review.googlesource.com/12890
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Rob Pike <r@golang.org>
Suggested during code reviews of last 15 CLs (or so).
Change-Id: If780f6eb47a7a31df133c64d5dcf0eaf04d8447b
Reviewed-on: https://go-review.googlesource.com/10675
Reviewed-by: Ian Lance Taylor <iant@golang.org>
Reviewed-by: Josh Bleecher Snyder <josharian@gmail.com>
This is an automated follow-up to CL 10210.
It was generated with a combination of eg and gofmt -r.
No functional changes. Passes toolstash -cmp.
Change-Id: I35f5897948a270b472d8cf80612071b4b29e9a2b
Reviewed-on: https://go-review.googlesource.com/10253
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
Run-TryBot: Josh Bleecher Snyder <josharian@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Trivial merging of 5g, 6g, ... into go tool compile,
and similarlly 5l, 6l, ... into go tool link.
The files compile/main.go and link/main.go are new.
Everything else in those directories is a move followed by
change of imports and package name.
This CL breaks the build. Manual fixups are in the next CL.
See golang-dev thread titled "go tool compile, etc" for background.
Change-Id: Id35ff5a5859ad9037c61275d637b1bd51df6828b
Reviewed-on: https://go-review.googlesource.com/10287
Reviewed-by: Dave Cheney <dave@cheney.net>
Reviewed-by: Rob Pike <r@golang.org>
2015-05-21 17:31:51 +00:00
Renamed from src/cmd/internal/gc/swt.go (Browse further)
