Back to pre Russquake, Node.Nbody of OCALL* node is used to attach
variables which must be kept alive during that call.
Now after Russquake, we have CallExpr to represent a function call,
so use a dedicated field for those variables instead.
Passes toolstash -cmp.
Change-Id: I4f40ebefcc7c41cdcc4e29c7a6d8496a083b68f4
Reviewed-on: https://go-review.googlesource.com/c/go/+/280733
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL generalizes ir/mknode.go to get rid of most of almost all of
its special cases for node field types. The only remaining speciale
case now is Field, which doesn't implement Node any more, but perhaps
should.
To help with removing special cases, node fields can now be tagged
with `mknode:"-"` so that mknode ignores them when generating its
helper methods. Further, to simplify skipping all of the orig fields,
a new origNode helper type is added which declares an orig field
marked as `mknode:"-"` and also provides the Orig and SetOrig methods
needed to implement the OrigNode interface.
Passes toolstash -cmp.
Change-Id: Ic68d4f0a9d2ef6e57e9fe87cdc641e5c4859830b
Reviewed-on: https://go-review.googlesource.com/c/go/+/280674
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
For being consistent with other Prealloc fields.
[git-generate]
cd src/cmd/compile/internal/ir
rf '
mv AddrExpr.Alloc AddrExpr.Prealloc
'
go generate
Change-Id: Id1b05119092036e3f8208b73b63bd0ca6ceb7b15
Reviewed-on: https://go-review.googlesource.com/c/go/+/279450
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Escape analysis uses Node.Opt to map nodes to their "location", so
that other references to the same node use the same location
again. But in the current implementation of escape analysis, we never
need to refer back to a node's location except for named nodes (since
other nodes are anonymous, and have no way to be referenced).
This CL moves Opt from Node down to Name, turns it into a directly
accessed field, and cleans up escape analysis to avoid setting Opt on
non-named expressions.
One nit: in walkCheckPtrArithmetic, we were abusing Opt as a way to
detect/prevent loops. This CL adds a CheckPtr bit flag instead.
Passes toolstash -cmp.
Change-Id: If57d5ad8d972fa63bedbe69b9ebb6753e31aba85
Reviewed-on: https://go-review.googlesource.com/c/go/+/280638
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Previously, ODOTTYPE/ODOTTYPE2 were forced to reuse some available
Node fields for storing pointers to runtime type descriptors. This
resulted in awkward field types for TypeAssertExpr and AddrExpr.
This CL gives TypeAssertExpr proper fields for the runtime type
descriptors, and also tightens the field types as
possible/appropriate.
Passes toolstash -cmp.
Change-Id: I521ee7a1462affc5459de33a0de6c68a7d6416ba
Reviewed-on: https://go-review.googlesource.com/c/go/+/280637
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
These three expression nodes all represent the same syntax, and so
they're represented the same within types2. And also they're not
handled that meaningfully differently throughout the rest of the
compiler to merit unique representations.
Method expressions are somewhat unique today that they're very
frequently turned into plain function names. But eventually that can
be handled by a post-typecheck desugaring phase that reduces the
number of redundant AST forms.
Passes toolstash -cmp.
Change-Id: I20df91bbd0d885c1f18ec67feb61ae1558670719
Reviewed-on: https://go-review.googlesource.com/c/go/+/280636
Trust: Matthew Dempsky <mdempsky@google.com>
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Dan Scales <danscales@google.com>
Now that the previous CL ensures we always set SelectorExpr.Selection,
we can replace the SelectorExpr.Offset field with a helper method that
simply returns SelectorExpr.Selection.Offset.
Passes toolstash -cmp.
Change-Id: Id0f22b8b1980397b668f6860d27cb197b90ff52a
Reviewed-on: https://go-review.googlesource.com/c/go/+/280433
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
ir.IsAssignable does not include map index expression, so it should be
named ir.IsAddressable instead.
[git-generate]
cd src/cmd/compile/internal/ir
rf '
mv IsAssignable IsAddressable
'
Change-Id: Ief6188e7b784ba9592d7b0cbec33b5f70d78f638
Reviewed-on: https://go-review.googlesource.com/c/go/+/279436
Trust: Cuong Manh Le <cuong.manhle.vn@gmail.com>
Run-TryBot: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL changes so that all literals are represented with a new,
smaller ir.BasicLit type, so that ir.Name is only used to represent
declared constants.
Passes buildall w/ toolstash -cmp.
Change-Id: I4702b8e3fa945617bd05881d7a2be1205f229633
Reviewed-on: https://go-review.googlesource.com/c/go/+/279153
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
For OSLICELITs, we were reusing the Ntype field after type checking to
hold the length of the OSLICELIT's backing array. However, Ntype is
only meant for nodes that can represent types. Today, this works only
because we currently use Name for all OLITERAL constants (whether
declared or not), whereas we should be able to represent them more
compactly with a dedicated type that doesn't implement Ntype.
Passes buildall w/ toolstash -cmp.
Change-Id: I385f1d787c41b016f507a5bad9489d59ccfde7f2
Reviewed-on: https://go-review.googlesource.com/c/go/+/279152
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
The prealloc map seems to exist to avoid adding a field to all nodes.
Now we can add a field to just the nodes that need the field,
so let's do that and avoid having a magic global with extra node state
that isn't preserved by operations like Copy nor printed by Dump.
This also makes clear which nodes can be prealloc'ed.
In particular, the code in walkstmt looked up an entry in
prealloc using an ONAME node, but there's no code that
ever stores such an entry, so the lookup never succeeded.
Having fields makes that kind of thing easier to see and fix.
Passes buildall w/ toolstash -cmp.
Change-Id: I418ad0e2847615c08868120c13ee719dc0b2eacb
Reviewed-on: https://go-review.googlesource.com/c/go/+/278915
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
An automated rewrite will add concrete type assertions after
a test of n.Op(), when n can be safely type-asserted
(meaning, n is not reassigned a different type, n is not reassigned
and then used outside the scope of the type assertion,
and so on).
This sequence of CLs handles the code that the automated
rewrite does not: adding specific types to function arguments,
adjusting code not to call n.Left() etc when n may have multiple
representations, and so on.
This CL focuses on sinit.go.
Passes buildall w/ toolstash -cmp.
Change-Id: I3e9458e69a7a9b3f2fe139382bf961bc4473cc42
Reviewed-on: https://go-review.googlesource.com/c/go/+/277928
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The general concept of an "implicit" operation is provided by every
expr representation, but it really only makes sense for a few of them,
and worse the exact definition of what "implicit" means differs from
node to node.
This CL moves the method to each node implementation, although
they all share the same header bit instead of each defining a bool field
that would turn into 8 bytes on 64-bit systems.
Now we can say precisely which Nodes have a meaningful Implicit
method: AddrExpr, CompLitExpr, ConvExpr, ParenExpr, and StarExpr.
Passes buildall w/ toolstash -cmp.
Change-Id: I7d85cb0507a514cdcb6eed21347f362e5fb57a91
Reviewed-on: https://go-review.googlesource.com/c/go/+/277918
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Based on actually using the IR when prototyping adding
type assertions, a few changes to improve it:
- Merge DeferStmt and GoStmt, since they are variants of one thing.
- Introduce LogicalExpr for && and ||, since they (alone) need an init list before Y.
- Add an explicit op to various constructors to make them easier to use.
- Add separate StructKeyExpr - it stores Value in a different abstract location (Left) than KeyExpr (Right).
- Export all fields for use by rewrites (and later reflection).
Passes buildall w/ toolstash -cmp.
Change-Id: Iefbff2386d2bb9ef511ce53b7f92ff6c709dc991
Reviewed-on: https://go-review.googlesource.com/c/go/+/275883
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The plan was always to export them once we remove the getters
and setters, but do it a bit early, with _ suffixes as needed, so that
the reflection-based ir.Dump can access the fields.
Passes buildall w/ toolstash -cmp.
[git-generate]
cd src/cmd/compile/internal/ir
rf '
mv AddStringExpr.list AddStringExpr.List_
mv BlockStmt.list BlockStmt.List_
mv CallExpr.body CallExpr.Body_
mv CaseStmt.list CaseStmt.List_
mv CaseStmt.body CaseStmt.Body_
mv ClosureExpr.fn ClosureExpr.Func_
mv CompLitExpr.list CompLitExpr.List_
mv ForStmt.body ForStmt.Body_
mv Func.body Func.Body_
mv IfStmt.body IfStmt.Body_
mv InlinedCallExpr.body InlinedCallExpr.Body_
mv RangeStmt.body RangeStmt.Body_
mv SliceExpr.list SliceExpr.List_
mv SliceHeaderExpr.lenCap SliceHeaderExpr.LenCap_
mv TypeSwitchGuard.name TypeSwitchGuard.Name_
'
go generate
Change-Id: I06e65920cecbcc51bea2254f52fcd7d5c5d0dc90
Reviewed-on: https://go-review.googlesource.com/c/go/+/275784
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Ending typecheck1 in the switch makes it safe for each case
to do an appropriate type assertion. The main change is dropping
the computation of "ok" and using the syntax nodes themselves
to decide what's OK.
Passes buildall w/ toolstash -cmp.
Change-Id: I2a1873a51e3f1194d74bb87a6653cb9857a02a1b
Reviewed-on: https://go-review.googlesource.com/c/go/+/275444
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Add Node method generator by Matthew Dempsky,
lightly adapted to account for a few special cases.
No more writing these by hand.
Change-Id: I6933b895df666928b851bddf81b994799c0c97f7
Reviewed-on: https://go-review.googlesource.com/c/go/+/275434
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The only reason for the DeepCopyNode interface was to
allow the type syntaxes to avoid being constrained by
Left, Right etc. methods. Now those are gone, so the
general traversal methods they implement (doChildren, editChildren)
do the right thing for DeepCopy.
Passes buildall w/ toolstash -cmp.
Change-Id: I54672c011114a95efabff32dbcf02e6071f91b9e
Reviewed-on: https://go-review.googlesource.com/c/go/+/275379
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Put each node in charge of its EditChildren implementation.
This removes the final generic use of Left, SetLeft, Right, SetRight,
and so on in package ir.
Passes buildall w/ toolstash -cmp.
Change-Id: I9821cc20f5b91cc9b44eb1f386cc82f20cd6770c
Reviewed-on: https://go-review.googlesource.com/c/go/+/275376
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Put each node in charge of its DoChildren implementation.
This removes a generic use of Left, Right, and so on
in func DoChildren, heading toward removing those even from
being used in package ir.
Passes buildall w/ toolstash -cmp.
Change-Id: Ibdf56f36801217cf24549e063da0078c1820a56b
Reviewed-on: https://go-review.googlesource.com/c/go/+/275375
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Put each node in charge of making copies of its own slices.
This removes a generic use of Body, SetBody, and so on
in func Copy, heading toward removing those even from
being used in package ir.
Passes buildall w/ toolstash -cmp.
Change-Id: I249b7fe54cf72e9d2f0467b10f3f257abf9b29b9
Reviewed-on: https://go-review.googlesource.com/c/go/+/275374
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL rephrases the general inlining rewriter in terms of ir.EditChildren.
It is the final part of the code that was processing arbitrary nodes using
Left, SetLeft, and so on. After this CL, there should be none left except
for the implementations of DoChildren and EditChildren, which fall next.
Passes buildall w/ toolstash -cmp.
Change-Id: I9c36053360cd040710716f0b39397a80114be713
Reviewed-on: https://go-review.googlesource.com/c/go/+/275373
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This CL consolidates and cleans up fmt.go's logic for skipping past
Nodes introduced during typechecking. This allows eliminating SetOrig
on ConvExpr and Name. Also changes ConstExpr.SetOrig to a panic for
good measure.
The only remaining SetOrig uses now are for rewriting multi-value
"f(g())" calls and "return g()" statements, and type-checking
composite literals. It should be possible to eliminate both of those
as well.
Passes buildall w/ toolstash -cmp.
Change-Id: I478aea1a17dfb7a784293b930bf9081637eb2d7a
Reviewed-on: https://go-review.googlesource.com/c/go/+/275179
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
It's useful to have quick access to the types.Field that a given
selector or method value expression refer to. Previously we abused Opt
for this, but couldn't do that for OCALLPART because escape analysis
uses Opt.
Now that we have more flexibility, we can simply add additional
pointer fields for this. This also allows getting rid of an unneeded
ONAME node for OCALLPART.
Passes buildall w/ toolstash -cmp.
Change-Id: I980d7bdb19abfd0b6f58a232876861b88dee1e47
Reviewed-on: https://go-review.googlesource.com/c/go/+/275034
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Russ Cox <rsc@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
The start of abstracting away Type fields. This adds a new constructor
for named types, styled after go/types.NewNamed. Along with helper
methods for SetNod and Pos, this allows hiding Nod.
Change-Id: Ica107034b6346c7b523bf6ae2a34009e350a9aa8
Reviewed-on: https://go-review.googlesource.com/c/go/+/274434
Trust: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Russ Cox <rsc@golang.org>
RawCopy breaks the invariant that ir.Orig depends on for
allowing nodes to omit keeping their own orig fields.
Avoid surprises by unexporting it.
The only use in package gc was removed in the previous CL.
This one is a straight global search and replace RawCopy -> rawCopy.
Change-Id: Ia99c0f4665bf7ed4f878cc44456d5fbdf33bab8d
Reviewed-on: https://go-review.googlesource.com/c/go/+/274293
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
These are fairly rote implementations of structs appropriate to
each Op (or group of Ops).
The names of these are unknown except to ir.NodAt for now.
A later, automated change will introduce direct use of the types
throughout package gc.
(This CL is expressions; the previous one was statements.)
This is the last of the Ops that were previously handled by the
generic node struct, so that struct and its methods can be
and are deleted in this CL.
Passes buildall w/ toolstash -cmp.
Change-Id: I1703f35f24dcd3f7c5782a278e53c3fe04e87c37
Reviewed-on: https://go-review.googlesource.com/c/go/+/274109
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The type syntax is reused to stand in for the actual type once typechecked,
to avoid updating all the possible references to the original type syntax.
So all these implementations allow changing their Op from the raw syntax
like OTMAP to the finished form OTYPE, even though obviously the
representation does not change.
Passes buildall w/ toolstash -cmp.
Change-Id: I4acca1a5b35fa2f48ee08e8f1e5a330a004c284b
Reviewed-on: https://go-review.googlesource.com/c/go/+/274103
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Now there are no longer any generic nodes with a non-nil
associated Func, so node.fn can be deleted. Also all manipulation
of func fields is done with concrete types, so Node.SetFunc can be
deleted, along with generic implementations.
Passes buildall w/ toolstash -cmp.
Change-Id: I4fee99870951ec9dc224f146d87b22e2bfe16889
Reviewed-on: https://go-review.googlesource.com/c/go/+/274099
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Closures are another reference to Funcs,
and it cleans up the code quite a bit to be clear about types.
OCLOSUREVAR is renamed to OCLOSUREREAD to make
clearer that it is unrelated to the list Func.ClosureVars.
Passes buildall w/ toolstash -cmp.
Change-Id: Id0d28df2d4d6e9954e34df7a39ea226995eee937
Reviewed-on: https://go-review.googlesource.com/c/go/+/274098
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Before this CL, an ONAME Node was represented by three structs
linked together: a node, a Name, and a Param. Previous CLs removed
OLABEL and OPACK from the set of nodes that knew about Name.
Now Name can be repurposed to *be* the ONAME Node implementation,
replacing three linked structs totaling 152+64+88 = 304 bytes (64-bit)
with a single 232-byte struct.
Many expressions in the code become simpler as well, without having
to use .Param. and sometimes even .Name().
(For a node n where n.Name() != nil, n.Name() == n.(*Name) now.)
Passes buildall w/ toolstash -cmp.
Change-Id: Ie719f1285c05623b9fd2faaa059e5b360a64b3be
Reviewed-on: https://go-review.googlesource.com/c/go/+/274094
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
