OPACK was using a whole Node and Name and Param
to hold about three fields. Give it its own implementation.
Passes buildall w/ toolstash -cmp.
Change-Id: I85a28b43d37183b2062d337b0b1b2eea52884e8c
Reviewed-on: https://go-review.googlesource.com/c/go/+/274093
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The plan is to introduce a Node interface that replaces the old *Node pointer-to-struct.
The previous CL defined an interface INode modeling a *Node.
This CL:
- Changes all references outside internal/ir to use INode,
along with many references inside internal/ir as well.
- Renames Node to node.
- Renames INode to Node
So now ir.Node is an interface implemented by *ir.node, which is otherwise inaccessible,
and the code outside package ir is now (clearly) using only the interface.
The usual rule is never to redefine an existing name with a new meaning,
so that old code that hasn't been updated gets a "unknown name" error
instead of more mysterious errors or silent misbehavior. That rule would
caution against replacing Node-the-struct with Node-the-interface,
as in this CL, because code that says *Node would now be using a pointer
to an interface. But this CL is being landed at the same time as another that
moves Node from gc to ir. So the net effect is to replace *gc.Node with ir.Node,
which does follow the rule: any lingering references to gc.Node will be told
it's gone, not silently start using pointers to interfaces. So the rule is followed
by the CL sequence, just not this specific CL.
Overall, the loss of inlining caused by using interfaces cuts the compiler speed
by about 6%, a not insignificant amount. However, as we convert the representation
to concrete structs that are not the giant Node over the next weeks, that speed
should come back as more of the compiler starts operating directly on concrete types
and the memory taken up by the graph of Nodes drops due to the more precise
structs. Honestly, I was expecting worse.
% benchstat bench.old bench.new
name old time/op new time/op delta
Template 168ms ± 4% 182ms ± 2% +8.34% (p=0.000 n=9+9)
Unicode 72.2ms ±10% 82.5ms ± 6% +14.38% (p=0.000 n=9+9)
GoTypes 563ms ± 8% 598ms ± 2% +6.14% (p=0.006 n=9+9)
Compiler 2.89s ± 4% 3.04s ± 2% +5.37% (p=0.000 n=10+9)
SSA 6.45s ± 4% 7.25s ± 5% +12.41% (p=0.000 n=9+10)
Flate 105ms ± 2% 115ms ± 1% +9.66% (p=0.000 n=10+8)
GoParser 144ms ±10% 152ms ± 2% +5.79% (p=0.011 n=9+8)
Reflect 345ms ± 9% 370ms ± 4% +7.28% (p=0.001 n=10+9)
Tar 149ms ± 9% 161ms ± 5% +8.05% (p=0.001 n=10+9)
XML 190ms ± 3% 209ms ± 2% +9.54% (p=0.000 n=9+8)
LinkCompiler 327ms ± 2% 325ms ± 2% ~ (p=0.382 n=8+8)
ExternalLinkCompiler 1.77s ± 4% 1.73s ± 6% ~ (p=0.113 n=9+10)
LinkWithoutDebugCompiler 214ms ± 4% 211ms ± 2% ~ (p=0.360 n=10+8)
StdCmd 14.8s ± 3% 15.9s ± 1% +6.98% (p=0.000 n=10+9)
[Geo mean] 480ms 510ms +6.31%
name old user-time/op new user-time/op delta
Template 223ms ± 3% 237ms ± 3% +6.16% (p=0.000 n=9+10)
Unicode 103ms ± 6% 113ms ± 3% +9.53% (p=0.000 n=9+9)
GoTypes 758ms ± 8% 800ms ± 2% +5.55% (p=0.003 n=10+9)
Compiler 3.95s ± 2% 4.12s ± 2% +4.34% (p=0.000 n=10+9)
SSA 9.43s ± 1% 9.74s ± 4% +3.25% (p=0.000 n=8+10)
Flate 132ms ± 2% 141ms ± 2% +6.89% (p=0.000 n=9+9)
GoParser 177ms ± 9% 183ms ± 4% ~ (p=0.050 n=9+9)
Reflect 467ms ±10% 495ms ± 7% +6.17% (p=0.029 n=10+10)
Tar 183ms ± 9% 197ms ± 5% +7.92% (p=0.001 n=10+10)
XML 249ms ± 5% 268ms ± 4% +7.82% (p=0.000 n=10+9)
LinkCompiler 544ms ± 5% 544ms ± 6% ~ (p=0.863 n=9+9)
ExternalLinkCompiler 1.79s ± 4% 1.75s ± 6% ~ (p=0.075 n=10+10)
LinkWithoutDebugCompiler 248ms ± 6% 246ms ± 2% ~ (p=0.965 n=10+8)
[Geo mean] 483ms 504ms +4.41%
[git-generate]
cd src/cmd/compile/internal/ir
: # We need to do the conversion in multiple steps, so we introduce
: # a temporary type alias that will start out meaning the pointer-to-struct
: # and then change to mean the interface.
rf '
mv Node OldNode
add node.go \
type Node = *OldNode
'
: # It should work to do this ex in ir, but it misses test files, due to a bug in rf.
: # Run the command in gc to handle gc's tests, and then again in ssa for ssa's tests.
cd ../gc
rf '
ex . ../arm ../riscv64 ../arm64 ../mips64 ../ppc64 ../mips ../wasm {
import "cmd/compile/internal/ir"
*ir.OldNode -> ir.Node
}
'
cd ../ssa
rf '
ex {
import "cmd/compile/internal/ir"
*ir.OldNode -> ir.Node
}
'
: # Back in ir, finish conversion clumsily with sed,
: # because type checking and circular aliases do not mix.
cd ../ir
sed -i '' '
/type Node = \*OldNode/d
s/\*OldNode/Node/g
s/^func (n Node)/func (n *OldNode)/
s/OldNode/node/g
s/type INode interface/type Node interface/
s/var _ INode = (Node)(nil)/var _ Node = (*node)(nil)/
' *.go
gofmt -w *.go
sed -i '' '
s/{Func{}, 136, 248}/{Func{}, 152, 280}/
s/{Name{}, 32, 56}/{Name{}, 44, 80}/
s/{Param{}, 24, 48}/{Param{}, 44, 88}/
s/{node{}, 76, 128}/{node{}, 88, 152}/
' sizeof_test.go
cd ../ssa
sed -i '' '
s/{LocalSlot{}, 28, 40}/{LocalSlot{}, 32, 48}/
' sizeof_test.go
cd ../gc
sed -i '' 's/\*ir.Node/ir.Node/' mkbuiltin.go
cd ../../../..
go install std cmd
cd cmd/compile
go test -u || go test -u
Change-Id: I196bbe3b648e4701662e4a2bada40bf155e2a553
Reviewed-on: https://go-review.googlesource.com/c/go/+/272935
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
If we want to break up package gc at all, we will need to move
the compiler IR it defines into a separate package that can be
imported by packages that gc itself imports. This CL does that.
It also removes the TINT8 etc aliases so that all code is clear
about which package things are coming from.
This CL is automatically generated by the script below.
See the comments in the script for details about the changes.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
# These names were never fully qualified
# when the types package was added.
# Do it now, to avoid confusion about where they live.
inline -rm \
Txxx \
TINT8 \
TUINT8 \
TINT16 \
TUINT16 \
TINT32 \
TUINT32 \
TINT64 \
TUINT64 \
TINT \
TUINT \
TUINTPTR \
TCOMPLEX64 \
TCOMPLEX128 \
TFLOAT32 \
TFLOAT64 \
TBOOL \
TPTR \
TFUNC \
TSLICE \
TARRAY \
TSTRUCT \
TCHAN \
TMAP \
TINTER \
TFORW \
TANY \
TSTRING \
TUNSAFEPTR \
TIDEAL \
TNIL \
TBLANK \
TFUNCARGS \
TCHANARGS \
NTYPE \
BADWIDTH
# esc.go and escape.go do not need to be split.
# Append esc.go onto the end of escape.go.
mv esc.go escape.go
# Pull out the type format installation from func Main,
# so it can be carried into package ir.
mv Main:/Sconv.=/-0,/TypeLinkSym/-1 InstallTypeFormats
# Names that need to be exported for use by code left in gc.
mv Isconst IsConst
mv asNode AsNode
mv asNodes AsNodes
mv asTypesNode AsTypesNode
mv basicnames BasicTypeNames
mv builtinpkg BuiltinPkg
mv consttype ConstType
mv dumplist DumpList
mv fdumplist FDumpList
mv fmtMode FmtMode
mv goopnames OpNames
mv inspect Inspect
mv inspectList InspectList
mv localpkg LocalPkg
mv nblank BlankNode
mv numImport NumImport
mv opprec OpPrec
mv origSym OrigSym
mv stmtwithinit StmtWithInit
mv dump DumpAny
mv fdump FDumpAny
mv nod Nod
mv nodl NodAt
mv newname NewName
mv newnamel NewNameAt
mv assertRepresents AssertValidTypeForConst
mv represents ValidTypeForConst
mv nodlit NewLiteral
# Types and fields that need to be exported for use by gc.
mv nowritebarrierrecCallSym SymAndPos
mv SymAndPos.lineno SymAndPos.Pos
mv SymAndPos.target SymAndPos.Sym
mv Func.lsym Func.LSym
mv Func.setWBPos Func.SetWBPos
mv Func.numReturns Func.NumReturns
mv Func.numDefers Func.NumDefers
mv Func.nwbrCalls Func.NWBRCalls
# initLSym is an algorithm left behind in gc,
# not an operation on Func itself.
mv Func.initLSym initLSym
mv nodeQueue NodeQueue
mv NodeQueue.empty NodeQueue.Empty
mv NodeQueue.popLeft NodeQueue.PopLeft
mv NodeQueue.pushRight NodeQueue.PushRight
# Many methods on Node are actually algorithms that
# would apply to any node implementation.
# Those become plain functions.
mv Node.funcname FuncName
mv Node.isBlank IsBlank
mv Node.isGoConst isGoConst
mv Node.isNil IsNil
mv Node.isParamHeapCopy isParamHeapCopy
mv Node.isParamStackCopy isParamStackCopy
mv Node.isSimpleName isSimpleName
mv Node.mayBeShared MayBeShared
mv Node.pkgFuncName PkgFuncName
mv Node.backingArrayPtrLen backingArrayPtrLen
mv Node.isterminating isTermNode
mv Node.labeledControl labeledControl
mv Nodes.isterminating isTermNodes
mv Nodes.sigerr fmtSignature
mv Node.MethodName methodExprName
mv Node.MethodFunc methodExprFunc
mv Node.IsMethod IsMethod
# Every node will need to implement RawCopy;
# Copy and SepCopy algorithms will use it.
mv Node.rawcopy Node.RawCopy
mv Node.copy Copy
mv Node.sepcopy SepCopy
# Extract Node.Format method body into func FmtNode,
# but leave method wrapper behind.
mv Node.Format:0,$ FmtNode
# Formatting helpers that will apply to all node implementations.
mv Node.Line Line
mv Node.exprfmt exprFmt
mv Node.jconv jconvFmt
mv Node.modeString modeString
mv Node.nconv nconvFmt
mv Node.nodedump nodeDumpFmt
mv Node.nodefmt nodeFmt
mv Node.stmtfmt stmtFmt
# Constant support needed for code moving to ir.
mv okforconst OKForConst
mv vconv FmtConst
mv int64Val Int64Val
mv float64Val Float64Val
mv Node.ValueInterface ConstValue
# Organize code into files.
mv LocalPkg BuiltinPkg ir.go
mv NumImport InstallTypeFormats Line fmt.go
mv syntax.go Nod NodAt NewNameAt Class Pxxx PragmaFlag Nointerface SymAndPos \
AsNode AsTypesNode BlankNode OrigSym \
Node.SliceBounds Node.SetSliceBounds Op.IsSlice3 \
IsConst Node.Int64Val Node.CanInt64 Node.Uint64Val Node.BoolVal Node.StringVal \
Node.RawCopy SepCopy Copy \
IsNil IsBlank IsMethod \
Node.Typ Node.StorageClass node.go
mv ConstType ConstValue Int64Val Float64Val AssertValidTypeForConst ValidTypeForConst NewLiteral idealType OKForConst val.go
# Move files to new ir package.
mv bitset.go class_string.go dump.go fmt.go \
ir.go node.go op_string.go val.go \
sizeof_test.go cmd/compile/internal/ir
'
: # fix mkbuiltin.go to generate the changes made to builtin.go during rf
sed -i '' '
s/\[T/[types.T/g
s/\*Node/*ir.Node/g
/internal\/types/c \
fmt.Fprintln(&b, `import (`) \
fmt.Fprintln(&b, ` "cmd/compile/internal/ir"`) \
fmt.Fprintln(&b, ` "cmd/compile/internal/types"`) \
fmt.Fprintln(&b, `)`)
' mkbuiltin.go
gofmt -w mkbuiltin.go
: # update cmd/dist to add internal/ir
cd ../../../dist
sed -i '' '/compile.internal.gc/a\
"cmd/compile/internal/ir",
' buildtool.go
gofmt -w buildtool.go
: # update cmd/compile TestFormats
cd ../..
go install std cmd
cd cmd/compile
go test -u || go test # first one updates but fails; second passes
Change-Id: I5f7caf6b20629b51970279e81231a3574d5b51db
Reviewed-on: https://go-review.googlesource.com/c/go/+/273008
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Move Flag, Debug, Ctxt, Exit, and error messages to
new package cmd/compile/internal/base.
These are the core functionality that everything in gc uses
and which otherwise prevent splitting any other code
out of gc into different packages.
A minor milestone: the compiler source code
no longer contains the string "yy".
[git-generate]
cd src/cmd/compile/internal/gc
rf '
mv atExit AtExit
mv Ctxt atExitFuncs AtExit Exit base.go
mv lineno Pos
mv linestr FmtPos
mv flusherrors FlushErrors
mv yyerror Errorf
mv yyerrorl ErrorfAt
mv yyerrorv ErrorfVers
mv noder.yyerrorpos noder.errorAt
mv Warnl WarnfAt
mv errorexit ErrorExit
mv base.go debug.go flag.go print.go cmd/compile/internal/base
'
: # update comments
sed -i '' 's/yyerrorl/ErrorfAt/g; s/yyerror/Errorf/g' *.go
: # bootstrap.go is not built by default so invisible to rf
sed -i '' 's/Fatalf/base.Fatalf/' bootstrap.go
goimports -w bootstrap.go
: # update cmd/dist to add internal/base
cd ../../../dist
sed -i '' '/internal.amd64/a\
"cmd/compile/internal/base",
' buildtool.go
gofmt -w buildtool.go
Change-Id: I59903c7084222d6eaee38823fd222159ba24a31a
Reviewed-on: https://go-review.googlesource.com/c/go/+/272250
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that the debug settings are in a struct, use struct tags to set
the usage messages and use reflection to populate debugtab,
much like we did for the Flag struct.
Change-Id: Id2ba30c30a9158c062527715a68bf4dd94679457
Reviewed-on: https://go-review.googlesource.com/c/go/+/272247
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The debug table is not as haphazard as flags, but there are still
a few mismatches between command-line names and variable names.
This CL moves them all into a consistent home (var Debug, like var Flag).
Code updated automatically using the rf command below.
A followup CL will make a few manual cleanups, leaving this CL
completely automated and easier to regenerate during merge
conflicts.
[git-generate]
cd src/cmd/compile/internal/gc
rf '
add main.go var Debug struct{}
mv Debug_append Debug.Append
mv Debug_checkptr Debug.Checkptr
mv Debug_closure Debug.Closure
mv Debug_compilelater Debug.CompileLater
mv disable_checknil Debug.DisableNil
mv debug_dclstack Debug.DclStack
mv Debug_gcprog Debug.GCProg
mv Debug_libfuzzer Debug.Libfuzzer
mv Debug_checknil Debug.Nil
mv Debug_panic Debug.Panic
mv Debug_slice Debug.Slice
mv Debug_typeassert Debug.TypeAssert
mv Debug_wb Debug.WB
mv Debug_export Debug.Export
mv Debug_pctab Debug.PCTab
mv Debug_locationlist Debug.LocationLists
mv Debug_typecheckinl Debug.TypecheckInl
mv Debug_gendwarfinl Debug.DwarfInl
mv Debug_softfloat Debug.SoftFloat
mv Debug_defer Debug.Defer
mv Debug_dumpptrs Debug.DumpPtrs
mv flag.go:/parse.-d/-1,/unknown.debug/+2 parseDebug
mv debugtab Debug parseDebug \
debugHelpHeader debugHelpFooter \
debug.go
# Remove //go:generate line copied from main.go
rm debug.go:/go:generate/-+
'
Change-Id: I625761ca5659be4052f7161a83baa00df75cca91
Reviewed-on: https://go-review.googlesource.com/c/go/+/272246
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Now that all flags are in a struct, use struct tags to set the usage messages
and use reflection to walk the struct and register all the flags.
Also move some flag usage back into main.go that shouldn't
come with the rest of flag.go into package base.
Change-Id: Ie655582194906c9ab425c3d01ad8c304bc49bfe0
Reviewed-on: https://go-review.googlesource.com/c/go/+/271668
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The original meaning of type Func was "extra fields factored out
of a few cases of type Node having to do with functions",
but those specific cases didn't necessarily have any relation.
A typical declared function is represented by an ODCLFUNC Node
at its declaration and an ONAME node at its uses, and both those
have a .Func field, but they are *different* Funcs.
Similarly, a closure is represented both by an OCLOSURE Node for
the value itself and an ODCLFUNC Node for the underlying function
implementing the closure. Those too have *different* Funcs,
and the Func.Closure field in one points to the other and vice versa.
This has led to no end of confusion over the years.
This CL elevates type Func to be the canonical identifier for
a given Go function.
This looks like a trivial CL but in fact is the result of a lot of
scaffolding and rewriting, discarded once the result was achieved, to
separate out the three different kinds of Func nodes into three
separate fields, limited in use to each specific Node type, to
understand which Func fields are used by which Node types and what the
possible overlaps are. There were a few overlaps, most notably around
closures, which led to more fields being added to type Func to keep
them separate even though there is now a single Func instead of two
different ones for each function.
A future CL can and should change Curfn to be a *Func instead of
a *Node, finally eliminating the confusion about whether Curfn
is an ODCLFUNC node (as it is most of the time) or an ONAME node
(as it is when type-checking an inlined function body).
Although sizeof_test.go makes it look like Func is growing by two
words, there are now half as many Funcs in a running compilation,
so the memory footprint has actually been reduced substantially.
Change-Id: I598bd96c95728093dc769a835d48f2154a406a61
Reviewed-on: https://go-review.googlesource.com/c/go/+/272253
Trust: Russ Cox <rsc@golang.org>
Run-TryBot: Russ Cox <rsc@golang.org>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Prepare for factoring the error API out of this package by
cleaning it up. The doc comments use the intended new names,
which will be introduced in the next CL.
Change-Id: Ie4c8d4262422da32a9a9f750fda42c225b6b42a8
Reviewed-on: https://go-review.googlesource.com/c/go/+/272248
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
This sets up the next CL, moving importMap to a global zeroed struct.
Change-Id: I1acc91b440d3da6e28fb32bd275fb3cd36db4e97
Reviewed-on: https://go-review.googlesource.com/c/go/+/272046
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The current implementation copies Debug, clears a bunch of flags
that are meant to be considered OK, and then checks the result
against the zero value. But more flags are cleared than remain:
it's easier to write and to understand to just check the ones that
need checking.
This phrasing also makes it safe to move more flags into the struct.
It turns out that some of the flags being checked should probably
not be checked, but this CL is meant to be a strict semantic no-op,
so left a TODO to clean up the function a bit more later.
Change-Id: I7afe6d7b32b5b889c40dd339568e8602e02df9bc
Reviewed-on: https://go-review.googlesource.com/c/go/+/271666
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
The printing of the ptr values can mean that two dump outputs can't easily be
compared for the identical structure, so adding the "-d=dumpptrs" option to make
printing of Node pointer values be an option.
Change-Id: I0e92b02f069e9de2e6fa036a7841645d13cdd7a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/271339
Trust: Dan Scales <danscales@google.com>
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Within the frontend, we generally don't guarantee uniqueness of
anonymous types. For example, each struct type literal gets
represented by its own types.Type instance.
However, the field tracking code was using the struct type as a map
key. This broke in golang.org/cl/256457, because that CL started
changing the inlined parameter variables from using the types.Type of
the declared parameter to that of the call site argument. These are
always identical types (e.g., types.Identical would report true), but
they can be different pointer values, causing the map lookup to fail.
The easiest fix is to simply get rid of the map and instead use
Node.Opt for tracking the types.Field. To mitigate against more latent
field tracking failures (e.g., if any other code were to start trying
to use Opt on ODOT/ODOTPTR fields), we store this field
unconditionally. I also expect having the types.Field will be useful
to other frontend code in the future.
Finally, to make it easier to test field tracking without having to
run make.bash with GOEXPERIMENT=fieldtrack, this commit adds a
-d=fieldtrack flag as an alternative way to enable field tracking
within the compiler. See also #42681.
Fixes#42686.
Change-Id: I6923d206d5e2cab1e6798cba36cae96c1eeaea55
Reviewed-on: https://go-review.googlesource.com/c/go/+/271217
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Matthew Dempsky <mdempsky@google.com>
Enable pie as a buildmode for linux/riscv64, along with associated tests.
Change-Id: I3fb0234d534dbeb96aa6cee6ae872304fbe02cf4
Reviewed-on: https://go-review.googlesource.com/c/go/+/267317
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
After inlining, add a pass that looks for interface calls where we can
statically determine the interface value's concrete type. If such a
case is found, insert an explicit type assertion to the concrete type
so that escape analysis can see it.
Fixes#33160.
Change-Id: I36932c691693f0069e34384086d63133e249b06b
Reviewed-on: https://go-review.googlesource.com/c/go/+/264837
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: David Chase <drchase@google.com>
This reverts CL 263457.
It turns out that this still missed changes to cmd/link/internal/ld/config.go
and some of these build modes also fail once cgo is enabled. Disable again for
now.
Change-Id: Iaf40d44e1551afd5b040d357f04af134f55a64a9
Reviewed-on: https://go-review.googlesource.com/c/go/+/266317
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Joel Sing <joel@sing.id.au>
Enable c-archive, c-shared, shared and pie build modes for linux/riscv64.
Change-Id: I15a8a51b84dbbb82a5b6592aec84a7f09f0cc37f
Reviewed-on: https://go-review.googlesource.com/c/go/+/263457
Trust: Joel Sing <joel@sing.id.au>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
This commit contains the compiler support for //go:embed lines.
The go command passes to the compiler an "embed config"
that maps literal patterns like *.txt to the set of files to embed.
The compiler then lays out the content of those files as static data
in the form of an embed.Files or string or []byte in the final object file.
The test for this code is the end-to-end test hooking up the
embed, cmd/compile, and cmd/go changes, in the next CL.
For #41191.
Change-Id: I916e57f8cc65871dc0044c13d3f90c252a3fe1bf
Reviewed-on: https://go-review.googlesource.com/c/go/+/243944
Trust: Russ Cox <rsc@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
gc debug flags are currently stored in a 256-long array, that is then
addressed using the ASCII numeric value of the flag itself (a quirk
inherited from the old C compiler). It is also a little wasteful,
since we only define 16 flags, and the other 240 array elements are
always empty.
This change makes Debug a struct, which also provides static checking
that we're not referencing flags that does not exist.
Change-Id: I2f0dfef2529325514b3398cf78635543cdf48fe0
Reviewed-on: https://go-review.googlesource.com/c/go/+/263539
Trust: Alberto Donizetti <alb.donizetti@gmail.com>
Run-TryBot: Alberto Donizetti <alb.donizetti@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Matthew Dempsky <mdempsky@google.com>
Function symbols defined and referenced by assembly source currently
always default to ABI0; this patch adds preliminary support for
accepting an explicit ABI selector clause for func defs/refs. This
functionality is currently only enabled when compiling runtime-related
packages (runtime, syscall, reflect). Examples:
TEXT ·DefinedAbi0Symbol<ABI0>(SB),NOSPLIT,$0
RET
TEXT ·DefinedAbi1Symbol<ABIInternal>(SB),NOSPLIT,$0
CALL ·AbiZerolSym<ABI0>(SB)
...
JMP ·AbiInternalSym<ABIInternal>(SB)
RET
Also included is a small change to the code in the compiler that reads
the symabis file emitted by the assembler.
New behavior is currently gated under GOEXPERIMENT=regabi.
Updates #27539, #40724.
Change-Id: Ia22221fe26df0fa002191cfb13bdfaaa38d7df38
Reviewed-on: https://go-review.googlesource.com/c/go/+/260477
Run-TryBot: Than McIntosh <thanm@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Trust: Than McIntosh <thanm@google.com>
This was useful for debugging failures occurring during make.bash.
The added flush also ensures that any hints in the GOSSAFUNC output
are flushed before fatal exit.
The environment variable GOSSADIR specifies where the SSA html debugging
files should be placed. To avoid collisions, each one is written into
the [package].[functionOrMethod].html, where [package] is the filepath
separator separated package name, function is the function name, and method
is either (*Type).Method, or Type.Method, as appropriate. Directories
are created as necessary to make this work.
Change-Id: I420927426b618b633bb1ffc51cf0f223b8f6d49c
Reviewed-on: https://go-review.googlesource.com/c/go/+/252338
Trust: David Chase <drchase@google.com>
Run-TryBot: David Chase <drchase@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
xtop holds package's top-level declaration statements, but OCLOSURE
only appears in expression contexts. xtop will instead hold the
synthetic ODCLFUNC representing OCLOSURE's function body.
This CL makes the loop consistent with the later phases that only look
for ODCLFUNC nodes in xtop.
Passes toolstash-check.
Change-Id: I852a10ef1bf75bb3351e3da0357ca8b2e26aec6e
Reviewed-on: https://go-review.googlesource.com/c/go/+/255340
Trust: Matthew Dempsky <mdempsky@google.com>
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
Reviewed-by: Cuong Manh Le <cuong.manhle.vn@gmail.com>
TryBot-Result: Go Bot <gobot@golang.org>
This allows the global initializers function to go through normal
mid-end optimizations (e.g., inlining, escape analysis) like any other
function.
Updates #33485.
Change-Id: I9bcfe98b8628d1aca09b4c238d8d3b74c69010a5
Reviewed-on: https://go-review.googlesource.com/c/go/+/254839
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
funchdr and funcbody currently assume that either (1) Curfn == nil &&
dclcontext == PEXTERN, or (2) Curfn != nil && dclcontext == PAUTO.
This is a reasonable assumption during parsing. However, these
functions end up getting used in other contexts, and not all callers
are so disciplined about Curfn/dclcontext handling.
This CL changes them to save/restore arbitrary Curfn/dclcontext pairs
instead. This is necessary for the followup CL, which pushes fninit
earlier. Otherwise, Curfn/dclcontext fall out of sync, and funchdr
panics.
Passes toolstash-check.
Updates #33485.
Change-Id: I19b1be23db1bad6475345ae5c81bbdc66291a3a7
Reviewed-on: https://go-review.googlesource.com/c/go/+/254838
Run-TryBot: Matthew Dempsky <mdempsky@google.com>
TryBot-Result: Go Bot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
Trust: Matthew Dempsky <mdempsky@google.com>
We're reworking pclntab generation in the linker, and with that we're
moving FuncID generation in to the compiler. Determining the FuncID is
done by a lookup on the package.function name; therefore, we need the
package whenever we make the TEXT symbols.
Change-Id: I805445ffbf2f895f06ce3a91fb09126d012bf86e
Reviewed-on: https://go-review.googlesource.com/c/go/+/245318
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
For content-addressable symbols with relocations, we build a
content hash based on its content and relocations. Depending on
the category of the referenced symbol, we choose different hash
algorithms such that the hash is globally consistent.
For now, we only support content-addressable symbols with
relocations when the current package's import path is known, so
that the symbol names are fully expanded. Otherwise, if the
referenced symbol is a named symbol whose name is not fully
expanded, the hash won't be globally consistent, and can cause
erroneous collisions. This is fine for now, as the deduplication
is just an optimization, not a requirement for correctness (until
we get to type descriptors).
Change-Id: I639e4e03dd749b5d71f0a55c2525926575b1ac30
Reviewed-on: https://go-review.googlesource.com/c/go/+/243142
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
This change splits the SDWARFINFO symbol type (a generic container of
DWARF content) into separate sub-classes. The new symbol types are
SDWARFCUINFO comp unit DIE, also CU info and CU packagename syms
SDWARFCONST constant DIE
SDWARFFCN subprogram DIE (default and concrete)
SDWARFABSFCN abstract function DIE
SDWARFTYPE type DIE
SDWARFVAR global variable DIE
Advantage of doing this: in the linker there are several places where
we have to iterate over a symbol's relocations to pick out references
to specific classes of DWARF sub-symbols (for example, looking for all
abstract function DIEs referenced by a subprogram DIE, or looking at
all the type DIEs used in a subprogram DIE). By splitting SDWARFINFO
into parts clients can now look only at the relocation target's sym
type as opposed to having to materialize the target sym name, or do a
lookup.
Change-Id: I4e0ee3216d3c8f1a78bec3d296c01e95b3d025b5
Reviewed-on: https://go-review.googlesource.com/c/go/+/234684
Reviewed-by: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Now we have ctxt.IsAsm, use that, instead of passing in a
parameter.
Change-Id: I81dedbe6459424fa9a4c2bfbd9abd83d83f3a107
Reviewed-on: https://go-review.googlesource.com/c/go/+/234492
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
We are not going to merge to master until Go 1.16 cycle. The old
object support can go now.
Change-Id: I93e6f584974c7749d0a0c2e7a96def35134dc566
Reviewed-on: https://go-review.googlesource.com/c/go/+/231918
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
The new object files use indices for symbol references, instead
of names. Fundamental to the design, it requires that the
importing and imported packages have consistent view of symbol
indices. The Go command should already ensure this, when using
"go build". But in case it goes wrong, it could lead to obscure
errors like run-time crashes. It would be better to check the
index consistency at build time.
To do that, we add a fingerprint to each object file, which is
a hash of symbol indices. In the object file it records the
fingerprints of all imported packages, as well as its own
fingerprint. At link time, the linker checks that a package's
fingerprint matches the fingerprint recorded in the importing
packages, and issue an error if they don't match.
This CL does the first part: introducing the fingerprint in the
object file, and propagating fingerprints through
importing/exporting by the compiler. It is not yet used by the
linker. Next CL will do.
Change-Id: I0aa372da652e4afb11f2867cb71689a3e3f9966e
Reviewed-on: https://go-review.googlesource.com/c/go/+/229617
Reviewed-by: Austin Clements <austin@google.com>
Reviewed-by: Than McIntosh <thanm@google.com>
Reviewed-by: Jeremy Faller <jeremy@golang.org>
CL 201783 enable -d=checkptr when -race or -msan is specified
everywhere but windows.
But, now that all unsafe pointer conversions in the standard
library are fixed, enable -d=checkptr even on windows.
Updates #34964
Updates #34972
Change-Id: Id912fa83b0d5b46c6f1c134c742fd94d2d185835
Reviewed-on: https://go-review.googlesource.com/c/go/+/227003
Run-TryBot: Alex Brainman <alex.brainman@gmail.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
We still disallow inlining for an immediately-recursive function, but allow
inlining if a function is in a recursion chain.
If all functions in the recursion chain are simple, then we could inline
forever down the recursion chain (eventually running out of stack on the
compiler), so we add a map to keep track of the functions we have
already inlined at a call site. We stop inlining when we reach a
function that we have already inlined in the recursive chain. Of course,
normally the inlining will have stopped earlier, because of the cost
function.
We could also limit the depth of inlining by a simple count (say, limit
max inlining of 10 at any given site). Would that limit other
opportunities too much?
Added a test in test/inline.go. runtime.BenchmarkStackCopyNoCache() is
also already a good test that triggers the check to stop inlining
when we reach the start of the recursive chain again.
For the bent benchmark suite, the performance improvement was mostly not
statistically significant, but the geomean averaged out to: -0.68%. The text size
increase was less than .1% for all bent benchmarks. The cmd/go text size increase
was 0.02% and the cmd/compile text size increase was .1%.
Fixes#29737
Change-Id: I892fa84bb07a947b3125ec8f25ed0e508bf2bdf5
Reviewed-on: https://go-review.googlesource.com/c/go/+/226818
Run-TryBot: Dan Scales <danscales@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Keith Randall <khr@golang.org>
The only merge conflict is the addition of -spectre flag on
master and the addition of -go115newobj flag on dev.link.
Resolved trivially.
Change-Id: I5b46c2b25e140d6c3d8cb129acbd7a248ff03bb9
Add back the newobj flag, renamed to go115newobj, for feature
gating. The flag defaults to true.
This essentially reverts CL 206398 as well as CL 220060.
The old object format isn't working yet. Will fix in followup CLs.
Change-Id: I1ace2a9cbb1a322d2266972670d27bda4e24adbc
Reviewed-on: https://go-review.googlesource.com/c/go/+/224623
Run-TryBot: Cherry Zhang <cherryyz@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Than McIntosh <thanm@google.com>
This commit extends the -spectre flag to cmd/asm and adds
a new Spectre mitigation mode "ret", which enables the use
of retpolines.
Retpolines prevent speculation about the target of an indirect
jump or call and are described in more detail here:
https://support.google.com/faqs/answer/7625886
Change-Id: I4f2cb982fa94e44d91e49bd98974fd125619c93a
Reviewed-on: https://go-review.googlesource.com/c/go/+/222661
Reviewed-by: Keith Randall <khr@golang.org>
This commit adds a new cmd/compile flag -spectre,
which accepts a comma-separated list of possible
Spectre mitigations to apply, or the empty string (none),
or "all". The only known mitigation right now is "index",
which uses conditional moves to ensure that x86-64 CPUs
do not speculate past index bounds checks.
Speculating past index bounds checks may be problematic
on systems running privileged servers that accept requests
from untrusted users who can execute their own programs
on the same machine. (And some more constraints that
make it even more unlikely in practice.)
The cases this protects against are analogous to the ones
Microsoft explains in the "Array out of bounds load/store feeding ..."
sections here:
https://docs.microsoft.com/en-us/cpp/security/developer-guidance-speculative-execution?view=vs-2019#array-out-of-bounds-load-feeding-an-indirect-branch
Change-Id: Ib7532d7e12466b17e04c4e2075c2a456dc98f610
Reviewed-on: https://go-review.googlesource.com/c/go/+/222660
Reviewed-by: Keith Randall <khr@golang.org>
It has been a while we have not done this.
Merge conflict resolution:
- deleted/rewritten code modified on master
- CL 214286, ported in CL 217317
(cmd/internal/obj/objfile.go)
- CL 210678, it already includes a fix to new code
(cmd/link/internal/ld/deadcode.go)
- CL 209317, applied in this CL
(cmd/link/internal/loadelf/ldelf.go)
Change-Id: Ie927ea6a1d69ce49e8d03e56148cb2725e377876
Change the type printer to take a map of types that we're currently
printing. When we happen upon a type that we're already in the middle
of printing, print a reference to it instead.
A reference to another type is built using the offset of the first
byte of that type's string representation in the result. To facilitate
that computation (and it's probably more efficient, regardless), we
print the type to a buffer as we go, and build the string at the end.
It would be nice to use string.Builder instead of bytes.Buffer, but
string.Builder wasn't around in Go 1.4, and we'd like to bootstrap
from that version.
Fixes#29312
Change-Id: I49d788c1fa20f770df7b2bae3b9979d990d54803
Reviewed-on: https://go-review.googlesource.com/c/go/+/214239
Reviewed-by: Robert Griesemer <gri@golang.org>
Bring in Than's fix of #35779.
The only merge conflict is cmd/link/internal/loadelf/ldelf.go,
with a modification-deletion conflict.
Change-Id: Id2fcfd2094a31120966a6ea9c462b4ec76646b10
There are more cleanups to do, but I want to keep this CL mostly
a pure deletion.
Change-Id: Icd2ff0a4b648eb4adf3d29386542617e49620818
Reviewed-on: https://go-review.googlesource.com/c/go/+/206398
Run-TryBot: Cherry Zhang <cherryyz@google.com>
Reviewed-by: Brad Fitzpatrick <bradfitz@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This is intended to allow IDEs to note where the optimizer
was not able to improve users' code. There may be other
applications for this, for example in studying effectiveness
of optimizer changes more quickly than running benchmarks,
or in verifying that code changes did not accidentally disable
optimizations in performance-critical code.
Logging of nilcheck (bad) for amd64 is implemented as
proof-of-concept. In general, the intent is that optimizations
that didn't happen are what will be logged, because that is
believed to be what IDE users want.
Added flag -json=version,dest
Check that version=0. (Future compilers will support a
few recent versions, I hope that version is always <=3.)
Dest is expected to be one of:
/path (or \path in Windows)
will create directory /path and fill it w/ json files
file://path
will create directory path, intended either for
I:\dont\know\enough\about\windows\paths
trustme_I_know_what_I_am_doing_probably_testing
Not passing an absolute path name usually leads to
json splattered all over source directories,
or failure when those directories are not writeable.
If you want a foot-gun, you have to ask for it.
The JSON output is directed to subdirectories of dest,
where each subdirectory is net/url.PathEscape of the
package name, and each for each foo.go in the package,
net/url.PathEscape(foo).json is created. The first line
of foo.json contains version and context information,
and subsequent lines contains LSP-conforming JSON
describing the missing optimizations.
Change-Id: Ib83176a53a8c177ee9081aefc5ae05604ccad8a0
Reviewed-on: https://go-review.googlesource.com/c/go/+/204338
Run-TryBot: David Chase <drchase@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Cherry Zhang <cherryyz@google.com>
