// Copyright 2016 The Go Authors. All rights reserved.
// Use of this source code is governed by a BSD-style
// license that can be found in the LICENSE file.

package amd64

import (
	"fmt"
	"math"

	"cmd/compile/internal/gc"
	"cmd/compile/internal/ssa"
	"cmd/internal/obj"
	"cmd/internal/obj/x86"
)

// Smallest possible faulting page at address zero.
const minZeroPage = 4096

// ssaRegToReg maps ssa register numbers to obj register numbers.
var ssaRegToReg = []int16{
	x86.REG_AX,
	x86.REG_CX,
	x86.REG_DX,
	x86.REG_BX,
	x86.REG_SP,
	x86.REG_BP,
	x86.REG_SI,
	x86.REG_DI,
	x86.REG_R8,
	x86.REG_R9,
	x86.REG_R10,
	x86.REG_R11,
	x86.REG_R12,
	x86.REG_R13,
	x86.REG_R14,
	x86.REG_R15,
	x86.REG_X0,
	x86.REG_X1,
	x86.REG_X2,
	x86.REG_X3,
	x86.REG_X4,
	x86.REG_X5,
	x86.REG_X6,
	x86.REG_X7,
	x86.REG_X8,
	x86.REG_X9,
	x86.REG_X10,
	x86.REG_X11,
	x86.REG_X12,
	x86.REG_X13,
	x86.REG_X14,
	x86.REG_X15,
	0, // SB isn't a real register.  We fill an Addr.Reg field with 0 in this case.
}

// markMoves marks any MOVXconst ops that need to avoid clobbering flags.
func ssaMarkMoves(s *gc.SSAGenState, b *ssa.Block) {
	flive := b.FlagsLiveAtEnd
	if b.Control != nil && b.Control.Type.IsFlags() {
		flive = true
	}
	for i := len(b.Values) - 1; i >= 0; i-- {
		v := b.Values[i]
		if flive && (v.Op == ssa.OpAMD64MOVBconst || v.Op == ssa.OpAMD64MOVWconst || v.Op == ssa.OpAMD64MOVLconst || v.Op == ssa.OpAMD64MOVQconst) {
			// The "mark" is any non-nil Aux value.
			v.Aux = v
		}
		if v.Type.IsFlags() {
			flive = false
		}
		for _, a := range v.Args {
			if a.Type.IsFlags() {
				flive = true
			}
		}
	}
}

// loadByType returns the load instruction of the given type.
func loadByType(t ssa.Type) obj.As {
	// Avoid partial register write
	if !t.IsFloat() && t.Size() <= 2 {
		if t.Size() == 1 {
			return x86.AMOVBLZX
		} else {
			return x86.AMOVWLZX
		}
	}
	// Otherwise, there's no difference between load and store opcodes.
	return storeByType(t)
}

// storeByType returns the store instruction of the given type.
func storeByType(t ssa.Type) obj.As {
	width := t.Size()
	if t.IsFloat() {
		switch width {
		case 4:
			return x86.AMOVSS
		case 8:
			return x86.AMOVSD
		}
	} else {
		switch width {
		case 1:
			return x86.AMOVB
		case 2:
			return x86.AMOVW
		case 4:
			return x86.AMOVL
		case 8:
			return x86.AMOVQ
		}
	}
	panic("bad store type")
}

// moveByType returns the reg->reg move instruction of the given type.
func moveByType(t ssa.Type) obj.As {
	if t.IsFloat() {
		// Moving the whole sse2 register is faster
		// than moving just the correct low portion of it.
		// There is no xmm->xmm move with 1 byte opcode,
		// so use movups, which has 2 byte opcode.
		return x86.AMOVUPS
	} else {
		switch t.Size() {
		case 1:
			// Avoids partial register write
			return x86.AMOVL
		case 2:
			return x86.AMOVL
		case 4:
			return x86.AMOVL
		case 8:
			return x86.AMOVQ
		case 16:
			return x86.AMOVUPS // int128s are in SSE registers
		default:
			panic(fmt.Sprintf("bad int register width %d:%s", t.Size(), t))
		}
	}
	panic("bad register type")
}

// opregreg emits instructions for
//     dest := dest(To) op src(From)
// and also returns the created obj.Prog so it
// may be further adjusted (offset, scale, etc).
func opregreg(op obj.As, dest, src int16) *obj.Prog {
	p := gc.Prog(op)
	p.From.Type = obj.TYPE_REG
	p.To.Type = obj.TYPE_REG
	p.To.Reg = dest
	p.From.Reg = src
	return p
}

func ssaGenValue(s *gc.SSAGenState, v *ssa.Value) {
	s.SetLineno(v.Line)
	switch v.Op {
	case ssa.OpAMD64ADDQ, ssa.OpAMD64ADDL, ssa.OpAMD64ADDW, ssa.OpAMD64ADDB:
		r := gc.SSARegNum(v)
		r1 := gc.SSARegNum(v.Args[0])
		r2 := gc.SSARegNum(v.Args[1])
		switch {
		case r == r1:
			p := gc.Prog(v.Op.Asm())
			p.From.Type = obj.TYPE_REG
			p.From.Reg = r2
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		case r == r2:
			p := gc.Prog(v.Op.Asm())
			p.From.Type = obj.TYPE_REG
			p.From.Reg = r1
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		default:
			var asm obj.As
			if v.Op == ssa.OpAMD64ADDQ {
				asm = x86.ALEAQ
			} else {
				asm = x86.ALEAL
			}
			p := gc.Prog(asm)
			p.From.Type = obj.TYPE_MEM
			p.From.Reg = r1
			p.From.Scale = 1
			p.From.Index = r2
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}
	// 2-address opcode arithmetic, symmetric
	case ssa.OpAMD64ADDSS, ssa.OpAMD64ADDSD,
		ssa.OpAMD64ANDQ, ssa.OpAMD64ANDL, ssa.OpAMD64ANDW, ssa.OpAMD64ANDB,
		ssa.OpAMD64ORQ, ssa.OpAMD64ORL, ssa.OpAMD64ORW, ssa.OpAMD64ORB,
		ssa.OpAMD64XORQ, ssa.OpAMD64XORL, ssa.OpAMD64XORW, ssa.OpAMD64XORB,
		ssa.OpAMD64MULQ, ssa.OpAMD64MULL, ssa.OpAMD64MULW, ssa.OpAMD64MULB,
		ssa.OpAMD64MULSS, ssa.OpAMD64MULSD, ssa.OpAMD64PXOR:
		r := gc.SSARegNum(v)
		x := gc.SSARegNum(v.Args[0])
		y := gc.SSARegNum(v.Args[1])
		if x != r && y != r {
			opregreg(moveByType(v.Type), r, x)
			x = r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
		if x == r {
			p.From.Reg = y
		} else {
			p.From.Reg = x
		}
	// 2-address opcode arithmetic, not symmetric
	case ssa.OpAMD64SUBQ, ssa.OpAMD64SUBL, ssa.OpAMD64SUBW, ssa.OpAMD64SUBB:
		r := gc.SSARegNum(v)
		x := gc.SSARegNum(v.Args[0])
		y := gc.SSARegNum(v.Args[1])
		var neg bool
		if y == r {
			// compute -(y-x) instead
			x, y = y, x
			neg = true
		}
		if x != r {
			opregreg(moveByType(v.Type), r, x)
		}
		opregreg(v.Op.Asm(), r, y)

		if neg {
			if v.Op == ssa.OpAMD64SUBQ {
				p := gc.Prog(x86.ANEGQ)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
			} else { // Avoids partial registers write
				p := gc.Prog(x86.ANEGL)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
			}
		}
	case ssa.OpAMD64SUBSS, ssa.OpAMD64SUBSD, ssa.OpAMD64DIVSS, ssa.OpAMD64DIVSD:
		r := gc.SSARegNum(v)
		x := gc.SSARegNum(v.Args[0])
		y := gc.SSARegNum(v.Args[1])
		if y == r && x != r {
			// r/y := x op r/y, need to preserve x and rewrite to
			// r/y := r/y op x15
			x15 := int16(x86.REG_X15)
			// register move y to x15
			// register move x to y
			// rename y with x15
			opregreg(moveByType(v.Type), x15, y)
			opregreg(moveByType(v.Type), r, x)
			y = x15
		} else if x != r {
			opregreg(moveByType(v.Type), r, x)
		}
		opregreg(v.Op.Asm(), r, y)

	case ssa.OpAMD64DIVQ, ssa.OpAMD64DIVL, ssa.OpAMD64DIVW,
		ssa.OpAMD64DIVQU, ssa.OpAMD64DIVLU, ssa.OpAMD64DIVWU,
		ssa.OpAMD64MODQ, ssa.OpAMD64MODL, ssa.OpAMD64MODW,
		ssa.OpAMD64MODQU, ssa.OpAMD64MODLU, ssa.OpAMD64MODWU:

		// Arg[0] is already in AX as it's the only register we allow
		// and AX is the only output
		x := gc.SSARegNum(v.Args[1])

		// CPU faults upon signed overflow, which occurs when most
		// negative int is divided by -1.
		var j *obj.Prog
		if v.Op == ssa.OpAMD64DIVQ || v.Op == ssa.OpAMD64DIVL ||
			v.Op == ssa.OpAMD64DIVW || v.Op == ssa.OpAMD64MODQ ||
			v.Op == ssa.OpAMD64MODL || v.Op == ssa.OpAMD64MODW {

			var c *obj.Prog
			switch v.Op {
			case ssa.OpAMD64DIVQ, ssa.OpAMD64MODQ:
				c = gc.Prog(x86.ACMPQ)
				j = gc.Prog(x86.AJEQ)
				// go ahead and sign extend to save doing it later
				gc.Prog(x86.ACQO)

			case ssa.OpAMD64DIVL, ssa.OpAMD64MODL:
				c = gc.Prog(x86.ACMPL)
				j = gc.Prog(x86.AJEQ)
				gc.Prog(x86.ACDQ)

			case ssa.OpAMD64DIVW, ssa.OpAMD64MODW:
				c = gc.Prog(x86.ACMPW)
				j = gc.Prog(x86.AJEQ)
				gc.Prog(x86.ACWD)
			}
			c.From.Type = obj.TYPE_REG
			c.From.Reg = x
			c.To.Type = obj.TYPE_CONST
			c.To.Offset = -1

			j.To.Type = obj.TYPE_BRANCH

		}

		// for unsigned ints, we sign extend by setting DX = 0
		// signed ints were sign extended above
		if v.Op == ssa.OpAMD64DIVQU || v.Op == ssa.OpAMD64MODQU ||
			v.Op == ssa.OpAMD64DIVLU || v.Op == ssa.OpAMD64MODLU ||
			v.Op == ssa.OpAMD64DIVWU || v.Op == ssa.OpAMD64MODWU {
			c := gc.Prog(x86.AXORQ)
			c.From.Type = obj.TYPE_REG
			c.From.Reg = x86.REG_DX
			c.To.Type = obj.TYPE_REG
			c.To.Reg = x86.REG_DX
		}

		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = x

		// signed division, rest of the check for -1 case
		if j != nil {
			j2 := gc.Prog(obj.AJMP)
			j2.To.Type = obj.TYPE_BRANCH

			var n *obj.Prog
			if v.Op == ssa.OpAMD64DIVQ || v.Op == ssa.OpAMD64DIVL ||
				v.Op == ssa.OpAMD64DIVW {
				// n * -1 = -n
				n = gc.Prog(x86.ANEGQ)
				n.To.Type = obj.TYPE_REG
				n.To.Reg = x86.REG_AX
			} else {
				// n % -1 == 0
				n = gc.Prog(x86.AXORQ)
				n.From.Type = obj.TYPE_REG
				n.From.Reg = x86.REG_DX
				n.To.Type = obj.TYPE_REG
				n.To.Reg = x86.REG_DX
			}

			j.To.Val = n
			j2.To.Val = s.Pc()
		}

	case ssa.OpAMD64HMULQ, ssa.OpAMD64HMULL, ssa.OpAMD64HMULW, ssa.OpAMD64HMULB,
		ssa.OpAMD64HMULQU, ssa.OpAMD64HMULLU, ssa.OpAMD64HMULWU, ssa.OpAMD64HMULBU:
		// the frontend rewrites constant division by 8/16/32 bit integers into
		// HMUL by a constant
		// SSA rewrites generate the 64 bit versions

		// Arg[0] is already in AX as it's the only register we allow
		// and DX is the only output we care about (the high bits)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[1])

		// IMULB puts the high portion in AH instead of DL,
		// so move it to DL for consistency
		if v.Type.Size() == 1 {
			m := gc.Prog(x86.AMOVB)
			m.From.Type = obj.TYPE_REG
			m.From.Reg = x86.REG_AH
			m.To.Type = obj.TYPE_REG
			m.To.Reg = x86.REG_DX
		}

	case ssa.OpAMD64AVGQU:
		// compute (x+y)/2 unsigned.
		// Do a 64-bit add, the overflow goes into the carry.
		// Shift right once and pull the carry back into the 63rd bit.
		r := gc.SSARegNum(v)
		x := gc.SSARegNum(v.Args[0])
		y := gc.SSARegNum(v.Args[1])
		if x != r && y != r {
			opregreg(moveByType(v.Type), r, x)
			x = r
		}
		p := gc.Prog(x86.AADDQ)
		p.From.Type = obj.TYPE_REG
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
		if x == r {
			p.From.Reg = y
		} else {
			p.From.Reg = x
		}
		p = gc.Prog(x86.ARCRQ)
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = 1
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r

	case ssa.OpAMD64SHLQ, ssa.OpAMD64SHLL, ssa.OpAMD64SHLW, ssa.OpAMD64SHLB,
		ssa.OpAMD64SHRQ, ssa.OpAMD64SHRL, ssa.OpAMD64SHRW, ssa.OpAMD64SHRB,
		ssa.OpAMD64SARQ, ssa.OpAMD64SARL, ssa.OpAMD64SARW, ssa.OpAMD64SARB:
		x := gc.SSARegNum(v.Args[0])
		r := gc.SSARegNum(v)
		if x != r {
			if r == x86.REG_CX {
				v.Fatalf("can't implement %s, target and shift both in CX", v.LongString())
			}
			p := gc.Prog(moveByType(v.Type))
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[1]) // should be CX
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpAMD64ADDQconst, ssa.OpAMD64ADDLconst, ssa.OpAMD64ADDWconst, ssa.OpAMD64ADDBconst:
		r := gc.SSARegNum(v)
		a := gc.SSARegNum(v.Args[0])
		if r == a {
			if v.AuxInt == 1 {
				var asm obj.As
				// Software optimization manual recommends add $1,reg.
				// But inc/dec is 1 byte smaller. ICC always uses inc
				// Clang/GCC choose depending on flags, but prefer add.
				// Experiments show that inc/dec is both a little faster
				// and make a binary a little smaller.
				if v.Op == ssa.OpAMD64ADDQconst {
					asm = x86.AINCQ
				} else {
					asm = x86.AINCL
				}
				p := gc.Prog(asm)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
				return
			} else if v.AuxInt == -1 {
				var asm obj.As
				if v.Op == ssa.OpAMD64ADDQconst {
					asm = x86.ADECQ
				} else {
					asm = x86.ADECL
				}
				p := gc.Prog(asm)
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
				return
			} else {
				p := gc.Prog(v.Op.Asm())
				p.From.Type = obj.TYPE_CONST
				p.From.Offset = v.AuxInt
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
				return
			}
		}
		var asm obj.As
		if v.Op == ssa.OpAMD64ADDQconst {
			asm = x86.ALEAQ
		} else {
			asm = x86.ALEAL
		}
		p := gc.Prog(asm)
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = a
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r

	case ssa.OpAMD64CMOVQEQconst, ssa.OpAMD64CMOVLEQconst, ssa.OpAMD64CMOVWEQconst,
		ssa.OpAMD64CMOVQNEconst, ssa.OpAMD64CMOVLNEconst, ssa.OpAMD64CMOVWNEconst:
		r := gc.SSARegNum(v)
		x := gc.SSARegNum(v.Args[0])
		// Arg0 is in/out, move in to out if not already same
		if r != x {
			p := gc.Prog(moveByType(v.Type))
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}

		// Constant into AX, after arg0 movement in case arg0 is in AX
		p := gc.Prog(moveByType(v.Type))
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x86.REG_AX

		p = gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = x86.REG_AX
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r

	case ssa.OpAMD64MULQconst, ssa.OpAMD64MULLconst, ssa.OpAMD64MULWconst, ssa.OpAMD64MULBconst:
		r := gc.SSARegNum(v)
		x := gc.SSARegNum(v.Args[0])
		if r != x {
			p := gc.Prog(moveByType(v.Type))
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
		// TODO: Teach doasm to compile the three-address multiply imul $c, r1, r2
		// instead of using the MOVQ above.
		//p.From3 = new(obj.Addr)
		//p.From3.Type = obj.TYPE_REG
		//p.From3.Reg = gc.SSARegNum(v.Args[0])
	case ssa.OpAMD64SUBQconst, ssa.OpAMD64SUBLconst, ssa.OpAMD64SUBWconst, ssa.OpAMD64SUBBconst:
		x := gc.SSARegNum(v.Args[0])
		r := gc.SSARegNum(v)
		// We have 3-op add (lea), so transforming a = b - const into
		// a = b + (- const), saves us 1 instruction. We can't fit
		// - (-1 << 31) into  4 bytes offset in lea.
		// We handle 2-address just fine below.
		if v.AuxInt == -1<<31 || x == r {
			if x != r {
				// This code compensates for the fact that the register allocator
				// doesn't understand 2-address instructions yet. TODO: fix that.
				p := gc.Prog(moveByType(v.Type))
				p.From.Type = obj.TYPE_REG
				p.From.Reg = x
				p.To.Type = obj.TYPE_REG
				p.To.Reg = r
			}
			p := gc.Prog(v.Op.Asm())
			p.From.Type = obj.TYPE_CONST
			p.From.Offset = v.AuxInt
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		} else if x == r && v.AuxInt == -1 {
			var asm obj.As
			// x = x - (-1) is the same as x++
			// See OpAMD64ADDQconst comments about inc vs add $1,reg
			if v.Op == ssa.OpAMD64SUBQconst {
				asm = x86.AINCQ
			} else {
				asm = x86.AINCL
			}
			p := gc.Prog(asm)
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		} else if x == r && v.AuxInt == 1 {
			var asm obj.As
			if v.Op == ssa.OpAMD64SUBQconst {
				asm = x86.ADECQ
			} else {
				asm = x86.ADECL
			}
			p := gc.Prog(asm)
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		} else {
			var asm obj.As
			if v.Op == ssa.OpAMD64SUBQconst {
				asm = x86.ALEAQ
			} else {
				asm = x86.ALEAL
			}
			p := gc.Prog(asm)
			p.From.Type = obj.TYPE_MEM
			p.From.Reg = x
			p.From.Offset = -v.AuxInt
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}

	case ssa.OpAMD64ANDQconst, ssa.OpAMD64ANDLconst, ssa.OpAMD64ANDWconst, ssa.OpAMD64ANDBconst,
		ssa.OpAMD64ORQconst, ssa.OpAMD64ORLconst, ssa.OpAMD64ORWconst, ssa.OpAMD64ORBconst,
		ssa.OpAMD64XORQconst, ssa.OpAMD64XORLconst, ssa.OpAMD64XORWconst, ssa.OpAMD64XORBconst,
		ssa.OpAMD64SHLQconst, ssa.OpAMD64SHLLconst, ssa.OpAMD64SHLWconst,
		ssa.OpAMD64SHLBconst, ssa.OpAMD64SHRQconst, ssa.OpAMD64SHRLconst, ssa.OpAMD64SHRWconst,
		ssa.OpAMD64SHRBconst, ssa.OpAMD64SARQconst, ssa.OpAMD64SARLconst, ssa.OpAMD64SARWconst,
		ssa.OpAMD64SARBconst, ssa.OpAMD64ROLQconst, ssa.OpAMD64ROLLconst, ssa.OpAMD64ROLWconst,
		ssa.OpAMD64ROLBconst:
		// This code compensates for the fact that the register allocator
		// doesn't understand 2-address instructions yet. TODO: fix that.
		x := gc.SSARegNum(v.Args[0])
		r := gc.SSARegNum(v)
		if x != r {
			p := gc.Prog(moveByType(v.Type))
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpAMD64SBBQcarrymask, ssa.OpAMD64SBBLcarrymask:
		r := gc.SSARegNum(v)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = r
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpAMD64LEAQ1, ssa.OpAMD64LEAQ2, ssa.OpAMD64LEAQ4, ssa.OpAMD64LEAQ8:
		r := gc.SSARegNum(v.Args[0])
		i := gc.SSARegNum(v.Args[1])
		p := gc.Prog(x86.ALEAQ)
		switch v.Op {
		case ssa.OpAMD64LEAQ1:
			p.From.Scale = 1
			if i == x86.REG_SP {
				r, i = i, r
			}
		case ssa.OpAMD64LEAQ2:
			p.From.Scale = 2
		case ssa.OpAMD64LEAQ4:
			p.From.Scale = 4
		case ssa.OpAMD64LEAQ8:
			p.From.Scale = 8
		}
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = r
		p.From.Index = i
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64LEAQ:
		p := gc.Prog(x86.ALEAQ)
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64CMPQ, ssa.OpAMD64CMPL, ssa.OpAMD64CMPW, ssa.OpAMD64CMPB,
		ssa.OpAMD64TESTQ, ssa.OpAMD64TESTL, ssa.OpAMD64TESTW, ssa.OpAMD64TESTB:
		opregreg(v.Op.Asm(), gc.SSARegNum(v.Args[1]), gc.SSARegNum(v.Args[0]))
	case ssa.OpAMD64UCOMISS, ssa.OpAMD64UCOMISD:
		// Go assembler has swapped operands for UCOMISx relative to CMP,
		// must account for that right here.
		opregreg(v.Op.Asm(), gc.SSARegNum(v.Args[0]), gc.SSARegNum(v.Args[1]))
	case ssa.OpAMD64CMPQconst, ssa.OpAMD64CMPLconst, ssa.OpAMD64CMPWconst, ssa.OpAMD64CMPBconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[0])
		p.To.Type = obj.TYPE_CONST
		p.To.Offset = v.AuxInt
	case ssa.OpAMD64TESTQconst, ssa.OpAMD64TESTLconst, ssa.OpAMD64TESTWconst, ssa.OpAMD64TESTBconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v.Args[0])
	case ssa.OpAMD64MOVBconst, ssa.OpAMD64MOVWconst, ssa.OpAMD64MOVLconst, ssa.OpAMD64MOVQconst:
		x := gc.SSARegNum(v)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		p.From.Offset = v.AuxInt
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x
		// If flags are live at this instruction, suppress the
		// MOV $0,AX -> XOR AX,AX optimization.
		if v.Aux != nil {
			p.Mark |= x86.PRESERVEFLAGS
		}
	case ssa.OpAMD64MOVSSconst, ssa.OpAMD64MOVSDconst:
		x := gc.SSARegNum(v)
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_FCONST
		p.From.Val = math.Float64frombits(uint64(v.AuxInt))
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x
	case ssa.OpAMD64MOVQload, ssa.OpAMD64MOVSSload, ssa.OpAMD64MOVSDload, ssa.OpAMD64MOVLload, ssa.OpAMD64MOVWload, ssa.OpAMD64MOVBload, ssa.OpAMD64MOVBQSXload, ssa.OpAMD64MOVWQSXload, ssa.OpAMD64MOVLQSXload, ssa.OpAMD64MOVOload:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVQloadidx8, ssa.OpAMD64MOVSDloadidx8:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 8
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVLloadidx4, ssa.OpAMD64MOVSSloadidx4:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 4
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVWloadidx2:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.From, v)
		p.From.Scale = 2
		p.From.Index = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVBloadidx1, ssa.OpAMD64MOVWloadidx1, ssa.OpAMD64MOVLloadidx1, ssa.OpAMD64MOVQloadidx1, ssa.OpAMD64MOVSSloadidx1, ssa.OpAMD64MOVSDloadidx1:
		r := gc.SSARegNum(v.Args[0])
		i := gc.SSARegNum(v.Args[1])
		if i == x86.REG_SP {
			r, i = i, r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_MEM
		p.From.Reg = r
		p.From.Scale = 1
		p.From.Index = i
		gc.AddAux(&p.From, v)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpAMD64MOVQstore, ssa.OpAMD64MOVSSstore, ssa.OpAMD64MOVSDstore, ssa.OpAMD64MOVLstore, ssa.OpAMD64MOVWstore, ssa.OpAMD64MOVBstore, ssa.OpAMD64MOVOstore:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[1])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVQstoreidx8, ssa.OpAMD64MOVSDstoreidx8:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 8
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVSSstoreidx4, ssa.OpAMD64MOVLstoreidx4:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 4
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVWstoreidx2:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		p.To.Scale = 2
		p.To.Index = gc.SSARegNum(v.Args[1])
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVBstoreidx1, ssa.OpAMD64MOVWstoreidx1, ssa.OpAMD64MOVLstoreidx1, ssa.OpAMD64MOVQstoreidx1, ssa.OpAMD64MOVSSstoreidx1, ssa.OpAMD64MOVSDstoreidx1:
		r := gc.SSARegNum(v.Args[0])
		i := gc.SSARegNum(v.Args[1])
		if i == x86.REG_SP {
			r, i = i, r
		}
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[2])
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = r
		p.To.Scale = 1
		p.To.Index = i
		gc.AddAux(&p.To, v)
	case ssa.OpAMD64MOVQstoreconst, ssa.OpAMD64MOVLstoreconst, ssa.OpAMD64MOVWstoreconst, ssa.OpAMD64MOVBstoreconst:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		sc := v.AuxValAndOff()
		p.From.Offset = sc.Val()
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux2(&p.To, v, sc.Off())
	case ssa.OpAMD64MOVQstoreconstidx1, ssa.OpAMD64MOVQstoreconstidx8, ssa.OpAMD64MOVLstoreconstidx1, ssa.OpAMD64MOVLstoreconstidx4, ssa.OpAMD64MOVWstoreconstidx1, ssa.OpAMD64MOVWstoreconstidx2, ssa.OpAMD64MOVBstoreconstidx1:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_CONST
		sc := v.AuxValAndOff()
		p.From.Offset = sc.Val()
		r := gc.SSARegNum(v.Args[0])
		i := gc.SSARegNum(v.Args[1])
		switch v.Op {
		case ssa.OpAMD64MOVBstoreconstidx1, ssa.OpAMD64MOVWstoreconstidx1, ssa.OpAMD64MOVLstoreconstidx1, ssa.OpAMD64MOVQstoreconstidx1:
			p.To.Scale = 1
			if i == x86.REG_SP {
				r, i = i, r
			}
		case ssa.OpAMD64MOVWstoreconstidx2:
			p.To.Scale = 2
		case ssa.OpAMD64MOVLstoreconstidx4:
			p.To.Scale = 4
		case ssa.OpAMD64MOVQstoreconstidx8:
			p.To.Scale = 8
		}
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = r
		p.To.Index = i
		gc.AddAux2(&p.To, v, sc.Off())
	case ssa.OpAMD64MOVLQSX, ssa.OpAMD64MOVWQSX, ssa.OpAMD64MOVBQSX, ssa.OpAMD64MOVLQZX, ssa.OpAMD64MOVWQZX, ssa.OpAMD64MOVBQZX,
		ssa.OpAMD64CVTSL2SS, ssa.OpAMD64CVTSL2SD, ssa.OpAMD64CVTSQ2SS, ssa.OpAMD64CVTSQ2SD,
		ssa.OpAMD64CVTTSS2SL, ssa.OpAMD64CVTTSD2SL, ssa.OpAMD64CVTTSS2SQ, ssa.OpAMD64CVTTSD2SQ,
		ssa.OpAMD64CVTSS2SD, ssa.OpAMD64CVTSD2SS:
		opregreg(v.Op.Asm(), gc.SSARegNum(v), gc.SSARegNum(v.Args[0]))
	case ssa.OpAMD64DUFFZERO:
		p := gc.Prog(obj.ADUFFZERO)
		p.To.Type = obj.TYPE_ADDR
		p.To.Sym = gc.Linksym(gc.Pkglookup("duffzero", gc.Runtimepkg))
		p.To.Offset = v.AuxInt
	case ssa.OpAMD64MOVOconst:
		if v.AuxInt != 0 {
			v.Unimplementedf("MOVOconst can only do constant=0")
		}
		r := gc.SSARegNum(v)
		opregreg(x86.AXORPS, r, r)
	case ssa.OpAMD64DUFFCOPY:
		p := gc.Prog(obj.ADUFFCOPY)
		p.To.Type = obj.TYPE_ADDR
		p.To.Sym = gc.Linksym(gc.Pkglookup("duffcopy", gc.Runtimepkg))
		p.To.Offset = v.AuxInt

	case ssa.OpCopy, ssa.OpAMD64MOVQconvert: // TODO: use MOVQreg for reg->reg copies instead of OpCopy?
		if v.Type.IsMemory() {
			return
		}
		x := gc.SSARegNum(v.Args[0])
		y := gc.SSARegNum(v)
		if x != y {
			opregreg(moveByType(v.Type), y, x)
		}
	case ssa.OpLoadReg:
		if v.Type.IsFlags() {
			v.Unimplementedf("load flags not implemented: %v", v.LongString())
			return
		}
		p := gc.Prog(loadByType(v.Type))
		n, off := gc.AutoVar(v.Args[0])
		p.From.Type = obj.TYPE_MEM
		p.From.Node = n
		p.From.Sym = gc.Linksym(n.Sym)
		p.From.Offset = off
		if n.Class == gc.PPARAM || n.Class == gc.PPARAMOUT {
			p.From.Name = obj.NAME_PARAM
			p.From.Offset += n.Xoffset
		} else {
			p.From.Name = obj.NAME_AUTO
		}
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)

	case ssa.OpStoreReg:
		if v.Type.IsFlags() {
			v.Unimplementedf("store flags not implemented: %v", v.LongString())
			return
		}
		p := gc.Prog(storeByType(v.Type))
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[0])
		n, off := gc.AutoVar(v)
		p.To.Type = obj.TYPE_MEM
		p.To.Node = n
		p.To.Sym = gc.Linksym(n.Sym)
		p.To.Offset = off
		if n.Class == gc.PPARAM || n.Class == gc.PPARAMOUT {
			p.To.Name = obj.NAME_PARAM
			p.To.Offset += n.Xoffset
		} else {
			p.To.Name = obj.NAME_AUTO
		}
	case ssa.OpPhi:
		// just check to make sure regalloc and stackalloc did it right
		if v.Type.IsMemory() {
			return
		}
		f := v.Block.Func
		loc := f.RegAlloc[v.ID]
		for _, a := range v.Args {
			if aloc := f.RegAlloc[a.ID]; aloc != loc { // TODO: .Equal() instead?
				v.Fatalf("phi arg at different location than phi: %v @ %v, but arg %v @ %v\n%s\n", v, loc, a, aloc, v.Block.Func)
			}
		}
	case ssa.OpInitMem:
		// memory arg needs no code
	case ssa.OpArg:
		// input args need no code
	case ssa.OpAMD64LoweredGetClosurePtr:
		// Output is hardwired to DX only,
		// and DX contains the closure pointer on
		// closure entry, and this "instruction"
		// is scheduled to the very beginning
		// of the entry block.
	case ssa.OpAMD64LoweredGetG:
		r := gc.SSARegNum(v)
		// See the comments in cmd/internal/obj/x86/obj6.go
		// near CanUse1InsnTLS for a detailed explanation of these instructions.
		if x86.CanUse1InsnTLS(gc.Ctxt) {
			// MOVQ (TLS), r
			p := gc.Prog(x86.AMOVQ)
			p.From.Type = obj.TYPE_MEM
			p.From.Reg = x86.REG_TLS
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		} else {
			// MOVQ TLS, r
			// MOVQ (r)(TLS*1), r
			p := gc.Prog(x86.AMOVQ)
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x86.REG_TLS
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
			q := gc.Prog(x86.AMOVQ)
			q.From.Type = obj.TYPE_MEM
			q.From.Reg = r
			q.From.Index = x86.REG_TLS
			q.From.Scale = 1
			q.To.Type = obj.TYPE_REG
			q.To.Reg = r
		}
	case ssa.OpAMD64CALLstatic:
		if v.Aux.(*gc.Sym) == gc.Deferreturn.Sym {
			// Deferred calls will appear to be returning to
			// the CALL deferreturn(SB) that we are about to emit.
			// However, the stack trace code will show the line
			// of the instruction byte before the return PC.
			// To avoid that being an unrelated instruction,
			// insert an actual hardware NOP that will have the right line number.
			// This is different from obj.ANOP, which is a virtual no-op
			// that doesn't make it into the instruction stream.
			ginsnop()
		}
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(v.Aux.(*gc.Sym))
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64CALLclosure:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v.Args[0])
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64CALLdefer:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(gc.Deferproc.Sym)
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64CALLgo:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(gc.Newproc.Sym)
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64CALLinter:
		p := gc.Prog(obj.ACALL)
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v.Args[0])
		if gc.Maxarg < v.AuxInt {
			gc.Maxarg = v.AuxInt
		}
	case ssa.OpAMD64NEGQ, ssa.OpAMD64NEGL, ssa.OpAMD64NEGW, ssa.OpAMD64NEGB,
		ssa.OpAMD64BSWAPQ, ssa.OpAMD64BSWAPL,
		ssa.OpAMD64NOTQ, ssa.OpAMD64NOTL, ssa.OpAMD64NOTW, ssa.OpAMD64NOTB:
		x := gc.SSARegNum(v.Args[0])
		r := gc.SSARegNum(v)
		if x != r {
			p := gc.Prog(moveByType(v.Type))
			p.From.Type = obj.TYPE_REG
			p.From.Reg = x
			p.To.Type = obj.TYPE_REG
			p.To.Reg = r
		}
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = r
	case ssa.OpAMD64BSFQ, ssa.OpAMD64BSFL, ssa.OpAMD64BSFW,
		ssa.OpAMD64BSRQ, ssa.OpAMD64BSRL, ssa.OpAMD64BSRW,
		ssa.OpAMD64SQRTSD:
		p := gc.Prog(v.Op.Asm())
		p.From.Type = obj.TYPE_REG
		p.From.Reg = gc.SSARegNum(v.Args[0])
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
	case ssa.OpSP, ssa.OpSB:
		// nothing to do
	case ssa.OpAMD64SETEQ, ssa.OpAMD64SETNE,
		ssa.OpAMD64SETL, ssa.OpAMD64SETLE,
		ssa.OpAMD64SETG, ssa.OpAMD64SETGE,
		ssa.OpAMD64SETGF, ssa.OpAMD64SETGEF,
		ssa.OpAMD64SETB, ssa.OpAMD64SETBE,
		ssa.OpAMD64SETORD, ssa.OpAMD64SETNAN,
		ssa.OpAMD64SETA, ssa.OpAMD64SETAE:
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)

	case ssa.OpAMD64SETNEF:
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
		q := gc.Prog(x86.ASETPS)
		q.To.Type = obj.TYPE_REG
		q.To.Reg = x86.REG_AX
		// ORL avoids partial register write and is smaller than ORQ, used by old compiler
		opregreg(x86.AORL, gc.SSARegNum(v), x86.REG_AX)

	case ssa.OpAMD64SETEQF:
		p := gc.Prog(v.Op.Asm())
		p.To.Type = obj.TYPE_REG
		p.To.Reg = gc.SSARegNum(v)
		q := gc.Prog(x86.ASETPC)
		q.To.Type = obj.TYPE_REG
		q.To.Reg = x86.REG_AX
		// ANDL avoids partial register write and is smaller than ANDQ, used by old compiler
		opregreg(x86.AANDL, gc.SSARegNum(v), x86.REG_AX)

	case ssa.OpAMD64InvertFlags:
		v.Fatalf("InvertFlags should never make it to codegen %v", v.LongString())
	case ssa.OpAMD64FlagEQ, ssa.OpAMD64FlagLT_ULT, ssa.OpAMD64FlagLT_UGT, ssa.OpAMD64FlagGT_ULT, ssa.OpAMD64FlagGT_UGT:
		v.Fatalf("Flag* ops should never make it to codegen %v", v.LongString())
	case ssa.OpAMD64REPSTOSQ:
		gc.Prog(x86.AREP)
		gc.Prog(x86.ASTOSQ)
	case ssa.OpAMD64REPMOVSQ:
		gc.Prog(x86.AREP)
		gc.Prog(x86.AMOVSQ)
	case ssa.OpVarDef:
		gc.Gvardef(v.Aux.(*gc.Node))
	case ssa.OpVarKill:
		gc.Gvarkill(v.Aux.(*gc.Node))
	case ssa.OpVarLive:
		gc.Gvarlive(v.Aux.(*gc.Node))
	case ssa.OpAMD64LoweredNilCheck:
		// Optimization - if the subsequent block has a load or store
		// at the same address, we don't need to issue this instruction.
		mem := v.Args[1]
		for _, w := range v.Block.Succs[0].Values {
			if w.Op == ssa.OpPhi {
				if w.Type.IsMemory() {
					mem = w
				}
				continue
			}
			if len(w.Args) == 0 || !w.Args[len(w.Args)-1].Type.IsMemory() {
				// w doesn't use a store - can't be a memory op.
				continue
			}
			if w.Args[len(w.Args)-1] != mem {
				v.Fatalf("wrong store after nilcheck v=%s w=%s", v, w)
			}
			switch w.Op {
			case ssa.OpAMD64MOVQload, ssa.OpAMD64MOVLload, ssa.OpAMD64MOVWload, ssa.OpAMD64MOVBload,
				ssa.OpAMD64MOVQstore, ssa.OpAMD64MOVLstore, ssa.OpAMD64MOVWstore, ssa.OpAMD64MOVBstore,
				ssa.OpAMD64MOVBQSXload, ssa.OpAMD64MOVWQSXload, ssa.OpAMD64MOVLQSXload,
				ssa.OpAMD64MOVSSload, ssa.OpAMD64MOVSDload, ssa.OpAMD64MOVOload,
				ssa.OpAMD64MOVSSstore, ssa.OpAMD64MOVSDstore, ssa.OpAMD64MOVOstore:
				if w.Args[0] == v.Args[0] && w.Aux == nil && w.AuxInt >= 0 && w.AuxInt < minZeroPage {
					if gc.Debug_checknil != 0 && int(v.Line) > 1 {
						gc.Warnl(v.Line, "removed nil check")
					}
					return
				}
			case ssa.OpAMD64MOVQstoreconst, ssa.OpAMD64MOVLstoreconst, ssa.OpAMD64MOVWstoreconst, ssa.OpAMD64MOVBstoreconst:
				off := ssa.ValAndOff(v.AuxInt).Off()
				if w.Args[0] == v.Args[0] && w.Aux == nil && off >= 0 && off < minZeroPage {
					if gc.Debug_checknil != 0 && int(v.Line) > 1 {
						gc.Warnl(v.Line, "removed nil check")
					}
					return
				}
			}
			if w.Type.IsMemory() {
				if w.Op == ssa.OpVarDef || w.Op == ssa.OpVarKill || w.Op == ssa.OpVarLive {
					// these ops are OK
					mem = w
					continue
				}
				// We can't delay the nil check past the next store.
				break
			}
		}
		// Issue a load which will fault if the input is nil.
		// TODO: We currently use the 2-byte instruction TESTB AX, (reg).
		// Should we use the 3-byte TESTB $0, (reg) instead?  It is larger
		// but it doesn't have false dependency on AX.
		// Or maybe allocate an output register and use MOVL (reg),reg2 ?
		// That trades clobbering flags for clobbering a register.
		p := gc.Prog(x86.ATESTB)
		p.From.Type = obj.TYPE_REG
		p.From.Reg = x86.REG_AX
		p.To.Type = obj.TYPE_MEM
		p.To.Reg = gc.SSARegNum(v.Args[0])
		gc.AddAux(&p.To, v)
		if gc.Debug_checknil != 0 && v.Line > 1 { // v.Line==1 in generated wrappers
			gc.Warnl(v.Line, "generated nil check")
		}
	default:
		v.Unimplementedf("genValue not implemented: %s", v.LongString())
	}
}

var blockJump = [...]struct {
	asm, invasm obj.As
}{
	ssa.BlockAMD64EQ:  {x86.AJEQ, x86.AJNE},
	ssa.BlockAMD64NE:  {x86.AJNE, x86.AJEQ},
	ssa.BlockAMD64LT:  {x86.AJLT, x86.AJGE},
	ssa.BlockAMD64GE:  {x86.AJGE, x86.AJLT},
	ssa.BlockAMD64LE:  {x86.AJLE, x86.AJGT},
	ssa.BlockAMD64GT:  {x86.AJGT, x86.AJLE},
	ssa.BlockAMD64ULT: {x86.AJCS, x86.AJCC},
	ssa.BlockAMD64UGE: {x86.AJCC, x86.AJCS},
	ssa.BlockAMD64UGT: {x86.AJHI, x86.AJLS},
	ssa.BlockAMD64ULE: {x86.AJLS, x86.AJHI},
	ssa.BlockAMD64ORD: {x86.AJPC, x86.AJPS},
	ssa.BlockAMD64NAN: {x86.AJPS, x86.AJPC},
}

var eqfJumps = [2][2]gc.FloatingEQNEJump{
	{{x86.AJNE, 1}, {x86.AJPS, 1}}, // next == b.Succs[0]
	{{x86.AJNE, 1}, {x86.AJPC, 0}}, // next == b.Succs[1]
}
var nefJumps = [2][2]gc.FloatingEQNEJump{
	{{x86.AJNE, 0}, {x86.AJPC, 1}}, // next == b.Succs[0]
	{{x86.AJNE, 0}, {x86.AJPS, 0}}, // next == b.Succs[1]
}

func ssaGenBlock(s *gc.SSAGenState, b, next *ssa.Block) {
	s.SetLineno(b.Line)

	switch b.Kind {
	case ssa.BlockPlain, ssa.BlockCall, ssa.BlockCheck:
		if b.Succs[0] != next {
			p := gc.Prog(obj.AJMP)
			p.To.Type = obj.TYPE_BRANCH
			s.Branches = append(s.Branches, gc.Branch{p, b.Succs[0]})
		}
	case ssa.BlockDefer:
		// defer returns in rax:
		// 0 if we should continue executing
		// 1 if we should jump to deferreturn call
		p := gc.Prog(x86.ATESTL)
		p.From.Type = obj.TYPE_REG
		p.From.Reg = x86.REG_AX
		p.To.Type = obj.TYPE_REG
		p.To.Reg = x86.REG_AX
		p = gc.Prog(x86.AJNE)
		p.To.Type = obj.TYPE_BRANCH
		s.Branches = append(s.Branches, gc.Branch{p, b.Succs[1]})
		if b.Succs[0] != next {
			p := gc.Prog(obj.AJMP)
			p.To.Type = obj.TYPE_BRANCH
			s.Branches = append(s.Branches, gc.Branch{p, b.Succs[0]})
		}
	case ssa.BlockExit:
		gc.Prog(obj.AUNDEF) // tell plive.go that we never reach here
	case ssa.BlockRet:
		gc.Prog(obj.ARET)
	case ssa.BlockRetJmp:
		p := gc.Prog(obj.AJMP)
		p.To.Type = obj.TYPE_MEM
		p.To.Name = obj.NAME_EXTERN
		p.To.Sym = gc.Linksym(b.Aux.(*gc.Sym))

	case ssa.BlockAMD64EQF:
		gc.SSAGenFPJump(s, b, next, &eqfJumps)

	case ssa.BlockAMD64NEF:
		gc.SSAGenFPJump(s, b, next, &nefJumps)

	case ssa.BlockAMD64EQ, ssa.BlockAMD64NE,
		ssa.BlockAMD64LT, ssa.BlockAMD64GE,
		ssa.BlockAMD64LE, ssa.BlockAMD64GT,
		ssa.BlockAMD64ULT, ssa.BlockAMD64UGT,
		ssa.BlockAMD64ULE, ssa.BlockAMD64UGE:
		jmp := blockJump[b.Kind]
		likely := b.Likely
		var p *obj.Prog
		switch next {
		case b.Succs[0]:
			p = gc.Prog(jmp.invasm)
			likely *= -1
			p.To.Type = obj.TYPE_BRANCH
			s.Branches = append(s.Branches, gc.Branch{p, b.Succs[1]})
		case b.Succs[1]:
			p = gc.Prog(jmp.asm)
			p.To.Type = obj.TYPE_BRANCH
			s.Branches = append(s.Branches, gc.Branch{p, b.Succs[0]})
		default:
			p = gc.Prog(jmp.asm)
			p.To.Type = obj.TYPE_BRANCH
			s.Branches = append(s.Branches, gc.Branch{p, b.Succs[0]})
			q := gc.Prog(obj.AJMP)
			q.To.Type = obj.TYPE_BRANCH
			s.Branches = append(s.Branches, gc.Branch{q, b.Succs[1]})
		}

		// liblink reorders the instruction stream as it sees fit.
		// Pass along what we know so liblink can make use of it.
		// TODO: Once we've fully switched to SSA,
		// make liblink leave our output alone.
		switch likely {
		case ssa.BranchUnlikely:
			p.From.Type = obj.TYPE_CONST
			p.From.Offset = 0
		case ssa.BranchLikely:
			p.From.Type = obj.TYPE_CONST
			p.From.Offset = 1
		}

	default:
		b.Unimplementedf("branch not implemented: %s. Control: %s", b.LongString(), b.Control.LongString())
	}
}