ladybird/Kernel/Time/HPET.cpp

347 lines
13 KiB
C++
Raw Normal View History

Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
/*
* Copyright (c) 2020, Liav A. <liavalb@hotmail.co.il>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
*
* 1. Redistributions of source code must retain the above copyright notice, this
* list of conditions and the following disclaimer.
*
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <AK/StringView.h>
#include <Kernel/ACPI/Parser.h>
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
#include <Kernel/Interrupts/InterruptManagement.h>
#include <Kernel/Time/HPET.h>
#include <Kernel/Time/HPETComparator.h>
#include <Kernel/Time/TimeManagement.h>
#include <Kernel/VM/MemoryManager.h>
#include <Kernel/VM/TypedMapping.h>
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
namespace Kernel {
#define ABSOLUTE_MAXIMUM_COUNTER_TICK_PERIOD 0x05F5E100
#define NANOSECOND_PERIOD_TO_HERTZ(x) 1000000000 / x
#define MEGAHERTZ_TO_HERTZ(x) (x / 1000000)
//#define HPET_DEBUG
namespace HPETFlags {
enum class Attributes {
Counter64BitCapable = 1 << 13,
LegacyReplacementRouteCapable = 1 << 15
};
enum class Configuration {
Enable = 0x1,
LegacyReplacementRoute = 0x2
};
enum class TimerConfiguration : u32 {
InterruptType = 1 << 1,
InterruptEnable = 1 << 2,
TimerType = 1 << 3,
PeriodicInterruptCapable = 1 << 4,
Timer64BitsCapable = 1 << 5,
ValueSet = 1 << 6,
Force32BitMode = 1 << 7,
FSBInterruptEnable = 1 << 14,
FSBInterruptDelivery = 1 << 15
};
};
struct [[gnu::packed]] TimerStructure
{
u64 configuration_and_capability;
u64 comparator_value;
u64 fsb_interrupt_route;
u64 reserved;
};
struct [[gnu::packed]] HPETCapabilityRegister
{
u32 attributes; // Note: We must do a 32 bit access to offsets 0x0, or 0x4 only, according to HPET spec.
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
u32 main_counter_tick_period;
u64 reserved;
};
struct [[gnu::packed]] HPETRegister
{
u64 reg;
u64 reserved;
};
struct [[gnu::packed]] HPETRegistersBlock
{
union {
HPETCapabilityRegister capabilities;
HPETRegister raw_capabilites;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
};
HPETRegister configuration;
HPETRegister interrupt_status;
u8 reserved[0xF0 - 48];
HPETRegister main_counter_value;
TimerStructure timers[3];
u8 reserved2[0x400 - 0x160];
};
static HPET* s_hpet;
static bool hpet_initialized { false };
bool HPET::initialized()
{
return hpet_initialized;
}
HPET& HPET::the()
{
ASSERT(HPET::initialized());
ASSERT(s_hpet != nullptr);
return *s_hpet;
}
bool HPET::test_and_initialize()
{
ASSERT(!HPET::initialized());
hpet_initialized = true;
auto hpet = ACPI::Parser::the()->find_table("HPET");
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
if (hpet.is_null())
return false;
klog() << "HPET @ " << hpet;
auto sdt = map_typed<ACPI::Structures::HPET>(hpet);
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
// Note: HPET is only usable from System Memory
ASSERT(sdt->event_timer_block.address_space == (u8)ACPI::GenericAddressStructure::AddressSpace::SystemMemory);
if (TimeManagement::is_hpet_periodic_mode_allowed()) {
if (!check_for_exisiting_periodic_timers()) {
dbg() << "HPET: No periodic capable timers";
return false;
}
}
s_hpet = new HPET(PhysicalAddress(hpet));
return true;
}
bool HPET::check_for_exisiting_periodic_timers()
{
auto hpet = ACPI::Parser::the()->find_table("HPET");
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
if (hpet.is_null())
return false;
auto sdt = map_typed<ACPI::Structures::HPET>(hpet);
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
ASSERT(sdt->event_timer_block.address_space == 0);
auto registers = map_typed<volatile HPETRegistersBlock>(PhysicalAddress(sdt->event_timer_block.address));
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
size_t timers_count = ((registers->raw_capabilites.reg >> 8) & 0x1f) + 1;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
for (size_t index = 0; index < timers_count; index++) {
if (registers->timers[index].configuration_and_capability & (u32)HPETFlags::TimerConfiguration::PeriodicInterruptCapable)
return true;
}
return false;
}
void HPET::global_disable()
{
registers().configuration.reg = registers().configuration.reg & ~(u32)HPETFlags::Configuration::Enable;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
}
void HPET::global_enable()
{
registers().configuration.reg = registers().configuration.reg | (u32)HPETFlags::Configuration::Enable;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
}
void HPET::set_periodic_comparator_value(const HPETComparator& comparator, u64 value)
{
disable(comparator);
ASSERT(comparator.is_periodic());
ASSERT(comparator.comparator_number() <= m_comparators.size());
volatile auto& timer = registers().timers[comparator.comparator_number()];
timer.configuration_and_capability = timer.configuration_and_capability | (u32)HPETFlags::TimerConfiguration::ValueSet;
timer.comparator_value = value;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
enable(comparator);
}
void HPET::set_non_periodic_comparator_value(const HPETComparator& comparator, u64 value)
{
ASSERT_INTERRUPTS_DISABLED();
ASSERT(!comparator.is_periodic());
ASSERT(comparator.comparator_number() <= m_comparators.size());
registers().timers[comparator.comparator_number()].comparator_value = main_counter_value() + value;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
}
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
void HPET::enable_periodic_interrupt(const HPETComparator& comparator)
{
#ifdef HPET_DEBUG
klog() << "HPET: Set comparator " << comparator.comparator_number() << " to be periodic.";
#endif
disable(comparator);
ASSERT(comparator.comparator_number() <= m_comparators.size());
volatile auto& timer = registers().timers[comparator.comparator_number()];
auto configuration_and_capability = timer.configuration_and_capability;
ASSERT(configuration_and_capability & (u32)HPETFlags::TimerConfiguration::PeriodicInterruptCapable);
timer.configuration_and_capability = configuration_and_capability | (u32)HPETFlags::TimerConfiguration::TimerType;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
enable(comparator);
}
void HPET::disable_periodic_interrupt(const HPETComparator& comparator)
{
#ifdef HPET_DEBUG
klog() << "HPET: Disable periodic interrupt in comparator " << comparator.comparator_number() << ".";
#endif
disable(comparator);
ASSERT(comparator.comparator_number() <= m_comparators.size());
auto volatile& timer = registers().timers[comparator.comparator_number()];
auto configuration_and_capability = timer.configuration_and_capability;
ASSERT(configuration_and_capability & (u32)HPETFlags::TimerConfiguration::PeriodicInterruptCapable);
timer.configuration_and_capability = configuration_and_capability & ~(u32)HPETFlags::TimerConfiguration::TimerType;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
enable(comparator);
}
void HPET::disable(const HPETComparator& comparator)
{
#ifdef HPET_DEBUG
klog() << "HPET: Disable comparator " << comparator.comparator_number() << ".";
#endif
ASSERT(comparator.comparator_number() <= m_comparators.size());
volatile auto& timer = registers().timers[comparator.comparator_number()];
timer.configuration_and_capability = timer.configuration_and_capability & ~(u32)HPETFlags::TimerConfiguration::InterruptEnable;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
}
void HPET::enable(const HPETComparator& comparator)
{
#ifdef HPET_DEBUG
klog() << "HPET: Enable comparator " << comparator.comparator_number() << ".";
#endif
ASSERT(comparator.comparator_number() <= m_comparators.size());
volatile auto& timer = registers().timers[comparator.comparator_number()];
timer.configuration_and_capability = timer.configuration_and_capability | (u32)HPETFlags::TimerConfiguration::InterruptEnable;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
}
u64 HPET::main_counter_value() const
{
return registers().main_counter_value.reg;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
}
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
u64 HPET::frequency() const
{
return m_frequency;
}
Vector<unsigned> HPET::capable_interrupt_numbers(const HPETComparator& comparator)
{
ASSERT(comparator.comparator_number() <= m_comparators.size());
Vector<unsigned> capable_interrupts;
auto& comparator_registers = (const volatile TimerStructure&)registers().timers[comparator.comparator_number()];
u32 interrupt_bitfield = comparator_registers.configuration_and_capability >> 32;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
for (size_t index = 0; index < 32; index++) {
if (interrupt_bitfield & 1)
capable_interrupts.append(index);
interrupt_bitfield >>= 1;
}
return capable_interrupts;
}
Vector<unsigned> HPET::capable_interrupt_numbers(u8 comparator_number)
{
ASSERT(comparator_number <= m_comparators.size());
Vector<unsigned> capable_interrupts;
auto& comparator_registers = (const volatile TimerStructure&)registers().timers[comparator_number];
u32 interrupt_bitfield = comparator_registers.configuration_and_capability >> 32;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
for (size_t index = 0; index < 32; index++) {
if (interrupt_bitfield & 1)
capable_interrupts.append(index);
interrupt_bitfield >>= 1;
}
return capable_interrupts;
}
void HPET::set_comparator_irq_vector(u8 comparator_number, u8 irq_vector)
{
ASSERT(comparator_number <= m_comparators.size());
auto& comparator_registers = (volatile TimerStructure&)registers().timers[comparator_number];
comparator_registers.configuration_and_capability = comparator_registers.configuration_and_capability | (irq_vector << 9);
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
}
bool HPET::is_periodic_capable(u8 comparator_number) const
{
ASSERT(comparator_number <= m_comparators.size());
auto& comparator_registers = (const volatile TimerStructure&)registers().timers[comparator_number];
return comparator_registers.configuration_and_capability & (u32)HPETFlags::TimerConfiguration::PeriodicInterruptCapable;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
}
void HPET::set_comparators_to_optimal_interrupt_state(size_t)
{
// FIXME: Implement this method for allowing to use HPET timers 2-31...
ASSERT_NOT_REACHED();
}
PhysicalAddress HPET::find_acpi_hpet_registers_block()
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
{
auto sdt = map_typed<const volatile ACPI::Structures::HPET>(m_physical_acpi_hpet_table);
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
ASSERT(sdt->event_timer_block.address_space == (u8)ACPI::GenericAddressStructure::AddressSpace::SystemMemory);
return PhysicalAddress(sdt->event_timer_block.address);
}
const volatile HPETRegistersBlock& HPET::registers() const
{
return *(const volatile HPETRegistersBlock*)m_hpet_mmio_region->vaddr().offset(m_physical_acpi_hpet_registers.offset_in_page()).as_ptr();
}
volatile HPETRegistersBlock& HPET::registers()
{
return *(volatile HPETRegistersBlock*)m_hpet_mmio_region->vaddr().offset(m_physical_acpi_hpet_registers.offset_in_page()).as_ptr();
}
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
u64 HPET::calculate_ticks_in_nanoseconds() const
{
return ABSOLUTE_MAXIMUM_COUNTER_TICK_PERIOD / registers().capabilities.main_counter_tick_period;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
}
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
HPET::HPET(PhysicalAddress acpi_hpet)
: m_physical_acpi_hpet_table(acpi_hpet)
, m_physical_acpi_hpet_registers(find_acpi_hpet_registers_block())
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
, m_hpet_mmio_region(MM.allocate_kernel_region(m_physical_acpi_hpet_registers.page_base(), PAGE_SIZE, "HPET MMIO", Region::Access::Read | Region::Access::Write))
{
auto sdt = map_typed<const volatile ACPI::Structures::HPET>(m_physical_acpi_hpet_table);
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
m_vendor_id = sdt->pci_vendor_id;
m_minimum_tick = sdt->mininum_clock_tick;
klog() << "HPET: Minimum clock tick - " << m_minimum_tick;
// Note: We must do a 32 bit access to offsets 0x0, or 0x4 only.
size_t timers_count = ((registers().raw_capabilites.reg >> 8) & 0x1f) + 1;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
klog() << "HPET: Timers count - " << timers_count;
ASSERT(timers_count >= 2);
auto* capabilities_register = (const volatile HPETCapabilityRegister*)&registers().raw_capabilites.reg;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
global_disable();
m_frequency = NANOSECOND_PERIOD_TO_HERTZ(calculate_ticks_in_nanoseconds());
klog() << "HPET: frequency " << m_frequency << " Hz (" << MEGAHERTZ_TO_HERTZ(m_frequency) << " MHz)";
ASSERT(capabilities_register->main_counter_tick_period <= ABSOLUTE_MAXIMUM_COUNTER_TICK_PERIOD);
// Reset the counter, just in case...
registers().main_counter_value.reg = 0;
if (registers().raw_capabilites.reg & (u32)HPETFlags::Attributes::LegacyReplacementRouteCapable)
registers().configuration.reg = registers().configuration.reg | (u32)HPETFlags::Configuration::LegacyReplacementRoute;
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
m_comparators.append(HPETComparator::create(0, 0, is_periodic_capable(0)));
m_comparators.append(HPETComparator::create(1, 8, is_periodic_capable(1)));
Kernel: Introduce the new Time management subsystem This new subsystem includes better abstractions of how time will be handled in the OS. We take advantage of the existing RTC timer to aid in keeping time synchronized. This is standing in contrast to how we handled time-keeping in the kernel, where the PIT was responsible for that function in addition to update the scheduler about ticks. With that new advantage, we can easily change the ticking dynamically and still keep the time synchronized. In the process context, we no longer use a fixed declaration of TICKS_PER_SECOND, but we call the TimeManagement singleton class to provide us the right value. This allows us to use dynamic ticking in the future, a feature known as tickless kernel. The scheduler no longer does by himself the calculation of real time (Unix time), and just calls the TimeManagment singleton class to provide the value. Also, we can use 2 new boot arguments: - the "time" boot argument accpets either the value "modern", or "legacy". If "modern" is specified, the time management subsystem will try to setup HPET. Otherwise, for "legacy" value, the time subsystem will revert to use the PIT & RTC, leaving HPET disabled. If this boot argument is not specified, the default pattern is to try to setup HPET. - the "hpet" boot argumet accepts either the value "periodic" or "nonperiodic". If "periodic" is specified, the HPET will scan for periodic timers, and will assert if none are found. If only one is found, that timer will be assigned for the time-keeping task. If more than one is found, both time-keeping task & scheduler-ticking task will be assigned to periodic timers. If this boot argument is not specified, the default pattern is to try to scan for HPET periodic timers. This boot argument has no effect if HPET is disabled. In hardware context, PIT & RealTimeClock classes are merely inheriting from the HardwareTimer class, and they allow to use the old i8254 (PIT) and RTC devices, managing them via IO ports. By default, the RTC will be programmed to a frequency of 1024Hz. The PIT will be programmed to a frequency close to 1000Hz. About HPET, depending if we need to scan for periodic timers or not, we try to set a frequency close to 1000Hz for the time-keeping timer and scheduler-ticking timer. Also, if possible, we try to enable the Legacy replacement feature of the HPET. This feature if exists, instructs the chipset to disconnect both i8254 (PIT) and RTC. This behavior is observable on QEMU, and was verified against the source code: https://github.com/qemu/qemu/commit/ce967e2f33861b0e17753f97fa4527b5943c94b6 The HPETComparator class is inheriting from HardwareTimer class, and is responsible for an individual HPET comparator, which is essentially a timer. Therefore, it needs to call the singleton HPET class to perform HPET-related operations. The new abstraction of Hardware timers brings an opportunity of more new features in the foreseeable future. For example, we can change the callback function of each hardware timer, thus it makes it possible to swap missions between hardware timers, or to allow to use a hardware timer for other temporary missions (e.g. calibrating the LAPIC timer, measuring the CPU frequency, etc).
2020-03-09 17:03:27 +02:00
global_enable();
}
}