ladybird/Userland/Libraries/LibJS/Runtime/ProxyObject.cpp

851 lines
35 KiB
C++
Raw Normal View History

/*
* Copyright (c) 2020, Matthew Olsson <mattco@serenityos.org>
* Copyright (c) 2021-2022, Linus Groh <linusg@serenityos.org>
*
* SPDX-License-Identifier: BSD-2-Clause
*/
#include <LibJS/Runtime/AbstractOperations.h>
#include <LibJS/Runtime/Accessor.h>
#include <LibJS/Runtime/Array.h>
#include <LibJS/Runtime/Error.h>
#include <LibJS/Runtime/GlobalObject.h>
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
#include <LibJS/Runtime/PropertyDescriptor.h>
#include <LibJS/Runtime/ProxyObject.h>
namespace JS {
ProxyObject* ProxyObject::create(Realm& realm, Object& target, Object& handler)
{
return realm.heap().allocate<ProxyObject>(realm, target, handler, *realm.global_object().object_prototype());
}
ProxyObject::ProxyObject(Object& target, Object& handler, Object& prototype)
: FunctionObject(prototype)
, m_target(target)
, m_handler(handler)
{
}
static Value property_key_to_value(VM& vm, PropertyKey const& property_key)
{
VERIFY(property_key.is_valid());
if (property_key.is_symbol())
return property_key.as_symbol();
if (property_key.is_string())
return js_string(vm, property_key.as_string());
VERIFY(property_key.is_number());
return js_string(vm, String::number(property_key.as_number()));
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.1 [[GetPrototypeOf]] ( ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-getprototypeof
ThrowCompletionOr<Object*> ProxyObject::internal_get_prototype_of() const
{
auto& vm = this->vm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 1. Let handler be O.[[ProxyHandler]].
// 2. If handler is null, throw a TypeError exception.
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
// 5. Let trap be ? GetMethod(handler, "getPrototypeOf").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.getPrototypeOf));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 6. If trap is undefined, then
if (!trap) {
// a. Return ? target.[[GetPrototypeOf]]().
return TRY(m_target.internal_get_prototype_of());
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 7. Let handlerProto be ? Call(trap, handler, « target »).
auto handler_proto = TRY(call(vm, *trap, &m_handler, &m_target));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 8. If Type(handlerProto) is neither Object nor Null, throw a TypeError exception.
if (!handler_proto.is_object() && !handler_proto.is_null())
return vm.throw_completion<TypeError>(ErrorType::ProxyGetPrototypeOfReturn);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 9. Let extensibleTarget be ? IsExtensible(target).
auto extensible_target = TRY(m_target.is_extensible());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10. If extensibleTarget is true, return handlerProto.
if (extensible_target)
return handler_proto.is_null() ? nullptr : &handler_proto.as_object();
// 11. Let targetProto be ? target.[[GetPrototypeOf]]().
auto* target_proto = TRY(m_target.internal_get_prototype_of());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 12. If SameValue(handlerProto, targetProto) is false, throw a TypeError exception.
if (!same_value(handler_proto, target_proto))
return vm.throw_completion<TypeError>(ErrorType::ProxyGetPrototypeOfNonExtensible);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 13. Return handlerProto.
return handler_proto.is_null() ? nullptr : &handler_proto.as_object();
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.2 [[SetPrototypeOf]] ( V ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-setprototypeof-v
ThrowCompletionOr<bool> ProxyObject::internal_set_prototype_of(Object* prototype)
{
auto& vm = this->vm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 1. Let handler be O.[[ProxyHandler]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 2. If handler is null, throw a TypeError exception.
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 5. Let trap be ? GetMethod(handler, "setPrototypeOf").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.setPrototypeOf));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 6. If trap is undefined, then
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (!trap) {
// a. Return ? target.[[SetPrototypeOf]](V).
return m_target.internal_set_prototype_of(prototype);
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 7. Let booleanTrapResult be ToBoolean(? Call(trap, handler, « target, V »)).
auto trap_result = TRY(call(vm, *trap, &m_handler, &m_target, prototype)).to_boolean();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 8. If booleanTrapResult is false, return false.
if (!trap_result)
return false;
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 9. Let extensibleTarget be ? IsExtensible(target).
auto extensible_target = TRY(m_target.is_extensible());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10. If extensibleTarget is true, return true.
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (extensible_target)
return true;
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 11. Let targetProto be ? target.[[GetPrototypeOf]]().
auto* target_proto = TRY(m_target.internal_get_prototype_of());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 12. If SameValue(V, targetProto) is false, throw a TypeError exception.
if (!same_value(prototype, target_proto))
return vm.throw_completion<TypeError>(ErrorType::ProxySetPrototypeOfNonExtensible);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 13. Return true.
return true;
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.3 [[IsExtensible]] ( ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-isextensible
ThrowCompletionOr<bool> ProxyObject::internal_is_extensible() const
{
auto& vm = this->vm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 1. Let handler be O.[[ProxyHandler]].
// 2. If handler is null, throw a TypeError exception.
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
// 5. Let trap be ? GetMethod(handler, "isExtensible").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.isExtensible));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 6. If trap is undefined, then
if (!trap) {
// a. Return ? IsExtensible(target).
return m_target.is_extensible();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 7. Let booleanTrapResult be ToBoolean(? Call(trap, handler, « target »)).
auto trap_result = TRY(call(vm, *trap, &m_handler, &m_target)).to_boolean();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 8. Let targetResult be ? IsExtensible(target).
auto target_result = TRY(m_target.is_extensible());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 9. If SameValue(booleanTrapResult, targetResult) is false, throw a TypeError exception.
if (trap_result != target_result)
return vm.throw_completion<TypeError>(ErrorType::ProxyIsExtensibleReturn);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10. Return booleanTrapResult.
return trap_result;
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.4 [[PreventExtensions]] ( ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-preventextensions
ThrowCompletionOr<bool> ProxyObject::internal_prevent_extensions()
{
auto& vm = this->vm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 1. Let handler be O.[[ProxyHandler]].
// 2. If handler is null, throw a TypeError exception.
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
// 5. Let trap be ? GetMethod(handler, "preventExtensions").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.preventExtensions));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 6. If trap is undefined, then
if (!trap) {
// a. Return ? target.[[PreventExtensions]]().
return m_target.internal_prevent_extensions();
}
// 7. Let booleanTrapResult be ToBoolean(? Call(trap, handler, « target »)).
auto trap_result = TRY(call(vm, *trap, &m_handler, &m_target)).to_boolean();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 8. If booleanTrapResult is true, then
if (trap_result) {
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// a. Let extensibleTarget be ? IsExtensible(target).
auto extensible_target = TRY(m_target.is_extensible());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// b. If extensibleTarget is true, throw a TypeError exception.
if (extensible_target)
return vm.throw_completion<TypeError>(ErrorType::ProxyPreventExtensionsReturn);
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 9. Return booleanTrapResult.
return trap_result;
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.5 [[GetOwnProperty]] ( P ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-getownproperty-p
2022-04-01 20:58:27 +03:00
ThrowCompletionOr<Optional<PropertyDescriptor>> ProxyObject::internal_get_own_property(PropertyKey const& property_key) const
{
auto& vm = this->vm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
VERIFY(property_key.is_valid());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 1. Let handler be O.[[ProxyHandler]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 2. If handler is null, throw a TypeError exception.
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 5. Let trap be ? GetMethod(handler, "getOwnPropertyDescriptor").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.getOwnPropertyDescriptor));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 6. If trap is undefined, then
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (!trap) {
// a. Return ? target.[[GetOwnProperty]](P).
return m_target.internal_get_own_property(property_key);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 7. Let trapResultObj be ? Call(trap, handler, « target, P »).
auto trap_result = TRY(call(vm, *trap, &m_handler, &m_target, property_key_to_value(vm, property_key)));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 8. If Type(trapResultObj) is neither Object nor Undefined, throw a TypeError exception.
if (!trap_result.is_object() && !trap_result.is_undefined())
return vm.throw_completion<TypeError>(ErrorType::ProxyGetOwnDescriptorReturn);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 9. Let targetDesc be ? target.[[GetOwnProperty]](P).
auto target_descriptor = TRY(m_target.internal_get_own_property(property_key));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10. If trapResultObj is undefined, then
if (trap_result.is_undefined()) {
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// a. If targetDesc is undefined, return undefined.
if (!target_descriptor.has_value())
return Optional<PropertyDescriptor> {};
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// b. If targetDesc.[[Configurable]] is false, throw a TypeError exception.
if (!*target_descriptor->configurable)
return vm.throw_completion<TypeError>(ErrorType::ProxyGetOwnDescriptorNonConfigurable);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// c. Let extensibleTarget be ? IsExtensible(target).
auto extensible_target = TRY(m_target.is_extensible());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// d. If extensibleTarget is false, throw a TypeError exception.
if (!extensible_target)
return vm.throw_completion<TypeError>(ErrorType::ProxyGetOwnDescriptorUndefinedReturn);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// e. Return undefined.
return Optional<PropertyDescriptor> {};
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 11. Let extensibleTarget be ? IsExtensible(target).
auto extensible_target = TRY(m_target.is_extensible());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 12. Let resultDesc be ? ToPropertyDescriptor(trapResultObj).
auto result_desc = TRY(to_property_descriptor(vm, trap_result));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 13. Perform CompletePropertyDescriptor(resultDesc).
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
result_desc.complete();
// 14. Let valid be IsCompatiblePropertyDescriptor(extensibleTarget, resultDesc, targetDesc).
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
auto valid = is_compatible_property_descriptor(extensible_target, result_desc, target_descriptor);
// 15. If valid is false, throw a TypeError exception.
if (!valid)
return vm.throw_completion<TypeError>(ErrorType::ProxyGetOwnDescriptorInvalidDescriptor);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 16. If resultDesc.[[Configurable]] is false, then
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (!*result_desc.configurable) {
// a. If targetDesc is undefined or targetDesc.[[Configurable]] is true, then
if (!target_descriptor.has_value() || *target_descriptor->configurable)
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// i. Throw a TypeError exception.
return vm.throw_completion<TypeError>(ErrorType::ProxyGetOwnDescriptorInvalidNonConfig);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// b. If resultDesc has a [[Writable]] field and resultDesc.[[Writable]] is false, then
if (result_desc.writable.has_value() && !*result_desc.writable) {
// i. If targetDesc.[[Writable]] is true, throw a TypeError exception.
if (*target_descriptor->writable)
return vm.throw_completion<TypeError>(ErrorType::ProxyGetOwnDescriptorNonConfigurableNonWritable);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 17. Return resultDesc.
return result_desc;
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.6 [[DefineOwnProperty]] ( P, Desc ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-defineownproperty-p-desc
ThrowCompletionOr<bool> ProxyObject::internal_define_own_property(PropertyKey const& property_key, PropertyDescriptor const& property_descriptor)
{
auto& vm = this->vm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
VERIFY(property_key.is_valid());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 1. Let handler be O.[[ProxyHandler]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 2. If handler is null, throw a TypeError exception.
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 5. Let trap be ? GetMethod(handler, "defineProperty").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.defineProperty));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 6. If trap is undefined, then
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (!trap) {
// a. Return ? target.[[DefineOwnProperty]](P, Desc).
return m_target.internal_define_own_property(property_key, property_descriptor);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 7. Let descObj be FromPropertyDescriptor(Desc).
auto descriptor_object = from_property_descriptor(vm, property_descriptor);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 8. Let booleanTrapResult be ToBoolean(? Call(trap, handler, « target, P, descObj »)).
auto trap_result = TRY(call(vm, *trap, &m_handler, &m_target, property_key_to_value(vm, property_key), descriptor_object)).to_boolean();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 9. If booleanTrapResult is false, return false.
if (!trap_result)
return false;
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10. Let targetDesc be ? target.[[GetOwnProperty]](P).
auto target_descriptor = TRY(m_target.internal_get_own_property(property_key));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 11. Let extensibleTarget be ? IsExtensible(target).
auto extensible_target = TRY(m_target.is_extensible());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 12. Else, let settingConfigFalse be false.
bool setting_config_false = false;
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 13. If Desc has a [[Configurable]] field and if Desc.[[Configurable]] is false, then
if (property_descriptor.configurable.has_value() && !*property_descriptor.configurable) {
// a. Let settingConfigFalse be true.
setting_config_false = true;
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 14. If targetDesc is undefined, then
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (!target_descriptor.has_value()) {
// a. If extensibleTarget is false, throw a TypeError exception.
if (!extensible_target)
return vm.throw_completion<TypeError>(ErrorType::ProxyDefinePropNonExtensible);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// b. If settingConfigFalse is true, throw a TypeError exception.
if (setting_config_false)
return vm.throw_completion<TypeError>(ErrorType::ProxyDefinePropNonConfigurableNonExisting);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 15. Else,
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
else {
// a. If IsCompatiblePropertyDescriptor(extensibleTarget, Desc, targetDesc) is false, throw a TypeError exception.
if (!is_compatible_property_descriptor(extensible_target, property_descriptor, target_descriptor))
return vm.throw_completion<TypeError>(ErrorType::ProxyDefinePropIncompatibleDescriptor);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// b. If settingConfigFalse is true and targetDesc.[[Configurable]] is true, throw a TypeError exception.
if (setting_config_false && *target_descriptor->configurable)
return vm.throw_completion<TypeError>(ErrorType::ProxyDefinePropExistingConfigurable);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// c. If IsDataDescriptor(targetDesc) is true, targetDesc.[[Configurable]] is false, and targetDesc.[[Writable]] is true, then
if (target_descriptor->is_data_descriptor() && !*target_descriptor->configurable && *target_descriptor->writable) {
// i. If Desc has a [[Writable]] field and Desc.[[Writable]] is false, throw a TypeError exception.
if (property_descriptor.writable.has_value() && !*property_descriptor.writable)
return vm.throw_completion<TypeError>(ErrorType::ProxyDefinePropNonWritable);
}
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 16. Return true.
return true;
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.7 [[HasProperty]] ( P ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-hasproperty-p
ThrowCompletionOr<bool> ProxyObject::internal_has_property(PropertyKey const& property_key) const
{
auto& vm = this->vm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
VERIFY(property_key.is_valid());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 1. Let handler be O.[[ProxyHandler]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 2. If handler is null, throw a TypeError exception.
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 5. Let trap be ? GetMethod(handler, "has").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.has));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 6. If trap is undefined, then
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (!trap) {
// a. Return ? target.[[HasProperty]](P).
return m_target.internal_has_property(property_key);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 7. Let booleanTrapResult be ToBoolean(? Call(trap, handler, « target, P »)).
auto trap_result = TRY(call(vm, *trap, &m_handler, &m_target, property_key_to_value(vm, property_key))).to_boolean();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 8. If booleanTrapResult is false, then
if (!trap_result) {
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// a. Let targetDesc be ? target.[[GetOwnProperty]](P).
auto target_descriptor = TRY(m_target.internal_get_own_property(property_key));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// b. If targetDesc is not undefined, then
if (target_descriptor.has_value()) {
// i. If targetDesc.[[Configurable]] is false, throw a TypeError exception.
if (!*target_descriptor->configurable)
return vm.throw_completion<TypeError>(ErrorType::ProxyHasExistingNonConfigurable);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// ii. Let extensibleTarget be ? IsExtensible(target).
auto extensible_target = TRY(m_target.is_extensible());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// iii. If extensibleTarget is false, throw a TypeError exception.
if (!extensible_target)
return vm.throw_completion<TypeError>(ErrorType::ProxyHasExistingNonExtensible);
}
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 9. Return booleanTrapResult.
return trap_result;
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.8 [[Get]] ( P, Receiver ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-get-p-receiver
ThrowCompletionOr<Value> ProxyObject::internal_get(PropertyKey const& property_key, Value receiver) const
{
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
VERIFY(!receiver.is_empty());
auto& vm = this->vm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
VERIFY(property_key.is_valid());
VERIFY(!receiver.is_empty());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 1. Let handler be O.[[ProxyHandler]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 2. If handler is null, throw a TypeError exception.
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// NOTE: We need to protect ourselves from a Proxy with the handler's prototype set to the
// Proxy itself, which would by default bounce between these functions indefinitely and lead to
// a stack overflow when the Proxy's (p) or Proxy handler's (h) Object::get() is called and the
// handler doesn't have a `get` trap:
//
// 1. p -> ProxyObject::internal_get() <- you are here
// 2. h -> Value::get_method()
// 3. h -> Value::get()
// 4. h -> Object::internal_get()
// 5. h -> Object::internal_get_prototype_of() (result is p)
// 6. goto 1
//
// In JS code: `h = {}; p = new Proxy({}, h); h.__proto__ = p; p.foo // or h.foo`
if (vm.did_reach_stack_space_limit())
return vm.throw_completion<InternalError>(ErrorType::CallStackSizeExceeded);
// 5. Let trap be ? GetMethod(handler, "get").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.get));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 6. If trap is undefined, then
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (!trap) {
// a. Return ? target.[[Get]](P, Receiver).
return m_target.internal_get(property_key, receiver);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 7. Let trapResult be ? Call(trap, handler, « target, P, Receiver »).
auto trap_result = TRY(call(vm, *trap, &m_handler, &m_target, property_key_to_value(vm, property_key), receiver));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 8. Let targetDesc be ? target.[[GetOwnProperty]](P).
auto target_descriptor = TRY(m_target.internal_get_own_property(property_key));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 9. If targetDesc is not undefined and targetDesc.[[Configurable]] is false, then
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (target_descriptor.has_value() && !*target_descriptor->configurable) {
// a. If IsDataDescriptor(targetDesc) is true and targetDesc.[[Writable]] is false, then
if (target_descriptor->is_data_descriptor() && !*target_descriptor->writable) {
// i. If SameValue(trapResult, targetDesc.[[Value]]) is false, throw a TypeError exception.
if (!same_value(trap_result, *target_descriptor->value))
return vm.throw_completion<TypeError>(ErrorType::ProxyGetImmutableDataProperty);
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// b. If IsAccessorDescriptor(targetDesc) is true and targetDesc.[[Get]] is undefined, then
if (target_descriptor->is_accessor_descriptor() && !*target_descriptor->get) {
// i. If trapResult is not undefined, throw a TypeError exception.
if (!trap_result.is_undefined())
return vm.throw_completion<TypeError>(ErrorType::ProxyGetNonConfigurableAccessor);
}
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10. Return trapResult.
return trap_result;
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.9 [[Set]] ( P, V, Receiver ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-set-p-v-receiver
ThrowCompletionOr<bool> ProxyObject::internal_set(PropertyKey const& property_key, Value value, Value receiver)
{
auto& vm = this->vm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
VERIFY(property_key.is_valid());
VERIFY(!value.is_empty());
VERIFY(!receiver.is_empty());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 1. Let handler be O.[[ProxyHandler]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 2. If handler is null, throw a TypeError exception.
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 5. Let trap be ? GetMethod(handler, "set").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.set));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 6. If trap is undefined, then
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (!trap) {
// a. Return ? target.[[Set]](P, V, Receiver).
return m_target.internal_set(property_key, value, receiver);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 7. Let booleanTrapResult be ToBoolean(? Call(trap, handler, « target, P, V, Receiver »)).
auto trap_result = TRY(call(vm, *trap, &m_handler, &m_target, property_key_to_value(vm, property_key), value, receiver)).to_boolean();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 8. If booleanTrapResult is false, return false.
if (!trap_result)
return false;
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 9. Let targetDesc be ? target.[[GetOwnProperty]](P).
auto target_descriptor = TRY(m_target.internal_get_own_property(property_key));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10. If targetDesc is not undefined and targetDesc.[[Configurable]] is false, then
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (target_descriptor.has_value() && !*target_descriptor->configurable) {
// a. If IsDataDescriptor(targetDesc) is true and targetDesc.[[Writable]] is false, then
if (target_descriptor->is_data_descriptor() && !*target_descriptor->writable) {
// i. If SameValue(V, targetDesc.[[Value]]) is false, throw a TypeError exception.
if (!same_value(value, *target_descriptor->value))
return vm.throw_completion<TypeError>(ErrorType::ProxySetImmutableDataProperty);
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// b. If IsAccessorDescriptor(targetDesc) is true, then
if (target_descriptor->is_accessor_descriptor()) {
// i. If targetDesc.[[Set]] is undefined, throw a TypeError exception.
if (!*target_descriptor->set)
return vm.throw_completion<TypeError>(ErrorType::ProxySetNonConfigurableAccessor);
}
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 11. Return true.
return true;
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.10 [[Delete]] ( P ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-delete-p
ThrowCompletionOr<bool> ProxyObject::internal_delete(PropertyKey const& property_key)
{
auto& vm = this->vm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
VERIFY(property_key.is_valid());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 1. Let handler be O.[[ProxyHandler]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 2. If handler is null, throw a TypeError exception.
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 5. Let trap be ? GetMethod(handler, "deleteProperty").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.deleteProperty));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 6. If trap is undefined, then
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (!trap) {
// a. Return ? target.[[Delete]](P).
return m_target.internal_delete(property_key);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 7. Let booleanTrapResult be ToBoolean(? Call(trap, handler, « target, P »)).
auto trap_result = TRY(call(vm, *trap, &m_handler, &m_target, property_key_to_value(vm, property_key))).to_boolean();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 8. If booleanTrapResult is false, return false.
if (!trap_result)
return false;
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 9. Let targetDesc be ? target.[[GetOwnProperty]](P).
auto target_descriptor = TRY(m_target.internal_get_own_property(property_key));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10. If targetDesc is undefined, return true.
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
if (!target_descriptor.has_value())
return true;
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 11. If targetDesc.[[Configurable]] is false, throw a TypeError exception.
if (!*target_descriptor->configurable)
return vm.throw_completion<TypeError>(ErrorType::ProxyDeleteNonConfigurable);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 12. Let extensibleTarget be ? IsExtensible(target).
auto extensible_target = TRY(m_target.is_extensible());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 13. If extensibleTarget is false, throw a TypeError exception.
if (!extensible_target)
return vm.throw_completion<TypeError>(ErrorType::ProxyDeleteNonExtensible);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 14. Return true.
return true;
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.11 [[OwnPropertyKeys]] ( ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-ownpropertykeys
ThrowCompletionOr<MarkedVector<Value>> ProxyObject::internal_own_property_keys() const
{
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
auto& vm = this->vm();
// 1. Let handler be O.[[ProxyHandler]].
// 2. If handler is null, throw a TypeError exception.
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
// 5. Let trap be ? GetMethod(handler, "ownKeys").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.ownKeys));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 6. If trap is undefined, then
if (!trap) {
// a. Return ? target.[[OwnPropertyKeys]]().
return m_target.internal_own_property_keys();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 7. Let trapResultArray be ? Call(trap, handler, « target »).
auto trap_result_array = TRY(call(vm, *trap, &m_handler, &m_target));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 8. Let trapResult be ? CreateListFromArrayLike(trapResultArray, « String, Symbol »).
HashTable<PropertyKey> unique_keys;
auto trap_result = TRY(create_list_from_array_like(vm, trap_result_array, [&](auto value) -> ThrowCompletionOr<void> {
if (!value.is_string() && !value.is_symbol())
return vm.throw_completion<TypeError>(ErrorType::ProxyOwnPropertyKeysNotStringOrSymbol);
auto property_key = MUST(value.to_property_key(vm));
unique_keys.set(property_key, AK::HashSetExistingEntryBehavior::Keep);
return {};
}));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 9. If trapResult contains any duplicate entries, throw a TypeError exception.
if (unique_keys.size() != trap_result.size())
return vm.throw_completion<TypeError>(ErrorType::ProxyOwnPropertyKeysDuplicates);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10. Let extensibleTarget be ? IsExtensible(target).
auto extensible_target = TRY(m_target.is_extensible());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 11. Let targetKeys be ? target.[[OwnPropertyKeys]]().
auto target_keys = TRY(m_target.internal_own_property_keys());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 12. Assert: targetKeys is a List of property keys.
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 13. Assert: targetKeys contains no duplicate entries.
// 14. Let targetConfigurableKeys be a new empty List.
auto target_configurable_keys = MarkedVector<Value> { heap() };
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 15. Let targetNonconfigurableKeys be a new empty List.
auto target_nonconfigurable_keys = MarkedVector<Value> { heap() };
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 16. For each element key of targetKeys, do
for (auto& key : target_keys) {
auto property_key = MUST(PropertyKey::from_value(vm, key));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// a. Let desc be ? target.[[GetOwnProperty]](key).
auto descriptor = TRY(m_target.internal_get_own_property(property_key));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// b. If desc is not undefined and desc.[[Configurable]] is false, then
if (descriptor.has_value() && !*descriptor->configurable) {
// i. Append key as an element of targetNonconfigurableKeys.
target_nonconfigurable_keys.append(key);
}
// c. Else,
else {
// i. Append key as an element of targetConfigurableKeys.
target_configurable_keys.append(key);
}
}
// 17. If extensibleTarget is true and targetNonconfigurableKeys is empty, then
if (extensible_target && target_nonconfigurable_keys.is_empty()) {
// a. Return trapResult.
return { move(trap_result) };
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 18. Let uncheckedResultKeys be a List whose elements are the elements of trapResult.
auto unchecked_result_keys = MarkedVector<Value> { heap() };
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
unchecked_result_keys.extend(trap_result);
// 19. For each element key of targetNonconfigurableKeys, do
for (auto& key : target_nonconfigurable_keys) {
// a. If key is not an element of uncheckedResultKeys, throw a TypeError exception.
if (!unchecked_result_keys.contains_slow(key))
return vm.throw_completion<TypeError>(ErrorType::ProxyOwnPropertyKeysSkippedNonconfigurableProperty, key.to_string_without_side_effects());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// b. Remove key from uncheckedResultKeys.
unchecked_result_keys.remove_first_matching([&](auto& value) {
return same_value(value, key);
});
}
// 20. If extensibleTarget is true, return trapResult.
if (extensible_target)
return { move(trap_result) };
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 21. For each element key of targetConfigurableKeys, do
for (auto& key : target_configurable_keys) {
// a. If key is not an element of uncheckedResultKeys, throw a TypeError exception.
if (!unchecked_result_keys.contains_slow(key))
return vm.throw_completion<TypeError>(ErrorType::ProxyOwnPropertyKeysNonExtensibleSkippedProperty, key.to_string_without_side_effects());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// b. Remove key from uncheckedResultKeys.
unchecked_result_keys.remove_first_matching([&](auto& value) {
return same_value(value, key);
});
}
// 22. If uncheckedResultKeys is not empty, throw a TypeError exception.
if (!unchecked_result_keys.is_empty())
return vm.throw_completion<TypeError>(ErrorType::ProxyOwnPropertyKeysNonExtensibleNewProperty, unchecked_result_keys[0].to_string_without_side_effects());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 23. Return trapResult.
return { move(trap_result) };
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.12 [[Call]] ( thisArgument, argumentsList ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-call-thisargument-argumentslist
ThrowCompletionOr<Value> ProxyObject::internal_call(Value this_argument, MarkedVector<Value> arguments_list)
{
auto& vm = this->vm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
auto& global_object = this->global_object();
auto& realm = *global_object.associated_realm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// A Proxy exotic object only has a [[Call]] internal method if the initial value of its [[ProxyTarget]] internal slot is an object that has a [[Call]] internal method.
LibJS: Implement [[Call]] and [[Construct]] internal slots properly This patch implements: - Spec compliant [[Call]] and [[Construct]] internal slots, as virtual FunctionObject::internal_{call,construct}(). These effectively replace the old virtual FunctionObject::{call,construct}(), but with several advantages: - Clear and consistent naming, following the object internal methods - Use of completions - internal_construct() returns an Object, and not Value! This has been a source of confusion for a long time, since in the spec there's always an Object returned but the Value return type in LibJS meant that this could not be fully trusted and something could screw you over. - Arguments are passed explicitly in form of a MarkedValueList, allowing manipulation (BoundFunction). We still put them on the execution context as a lot of code depends on it (VM::arguments()), but not from the Call() / Construct() AOs anymore, which now allows for bypassing them and invoking [[Call]] / [[Construct]] directly. Nothing but Call() / Construct() themselves do that at the moment, but future additions to ECMA262 or already existing web specs might. - Spec compliant, standalone Call() and Construct() AOs: currently the closest we have is VM::{call,construct}(), but those try to cater to all the different function object subclasses at once, resulting in a horrible mess and calling AOs with functions they should never be called with; most prominently PrepareForOrdinaryCall and OrdinaryCallBindThis, which are only for ECMAScriptFunctionObject. As a result this also contains an implicit optimization: we no longer need to create a new function environment for NativeFunctions - which, worth mentioning, is what started this whole crusade in the first place :^)
2021-10-08 20:37:21 +01:00
// TODO: We should be able to turn this into a VERIFY(), this must be checked at the call site.
// According to the spec, the Call() AO may be called with a non-function argument, but
// throws before calling [[Call]]() if that's the case.
if (!is_function())
return vm.throw_completion<TypeError>(ErrorType::NotAFunction, Value(this).to_string_without_side_effects());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 1. Let handler be O.[[ProxyHandler]].
// 2. If handler is null, throw a TypeError exception.
LibJS: Implement [[Call]] and [[Construct]] internal slots properly This patch implements: - Spec compliant [[Call]] and [[Construct]] internal slots, as virtual FunctionObject::internal_{call,construct}(). These effectively replace the old virtual FunctionObject::{call,construct}(), but with several advantages: - Clear and consistent naming, following the object internal methods - Use of completions - internal_construct() returns an Object, and not Value! This has been a source of confusion for a long time, since in the spec there's always an Object returned but the Value return type in LibJS meant that this could not be fully trusted and something could screw you over. - Arguments are passed explicitly in form of a MarkedValueList, allowing manipulation (BoundFunction). We still put them on the execution context as a lot of code depends on it (VM::arguments()), but not from the Call() / Construct() AOs anymore, which now allows for bypassing them and invoking [[Call]] / [[Construct]] directly. Nothing but Call() / Construct() themselves do that at the moment, but future additions to ECMA262 or already existing web specs might. - Spec compliant, standalone Call() and Construct() AOs: currently the closest we have is VM::{call,construct}(), but those try to cater to all the different function object subclasses at once, resulting in a horrible mess and calling AOs with functions they should never be called with; most prominently PrepareForOrdinaryCall and OrdinaryCallBindThis, which are only for ECMAScriptFunctionObject. As a result this also contains an implicit optimization: we no longer need to create a new function environment for NativeFunctions - which, worth mentioning, is what started this whole crusade in the first place :^)
2021-10-08 20:37:21 +01:00
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
// 5. Let trap be ? GetMethod(handler, "apply").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.apply));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 6. If trap is undefined, then
if (!trap) {
// a. Return ? Call(target, thisArgument, argumentsList).
return call(vm, &m_target, this_argument, move(arguments_list));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 7. Let argArray be CreateArrayFromList(argumentsList).
auto* arguments_array = Array::create_from(realm, arguments_list);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 8. Return ? Call(trap, handler, « target, thisArgument, argArray »).
return call(vm, trap, &m_handler, &m_target, this_argument, arguments_array);
}
bool ProxyObject::has_constructor() const
{
// Note: A Proxy exotic object only has a [[Construct]] internal method if the initial value of
// its [[ProxyTarget]] internal slot is an object that has a [[Construct]] internal method.
if (!is_function())
return false;
return static_cast<FunctionObject&>(m_target).has_constructor();
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10.5.13 [[Construct]] ( argumentsList, newTarget ), https://tc39.es/ecma262/#sec-proxy-object-internal-methods-and-internal-slots-construct-argumentslist-newtarget
ThrowCompletionOr<Object*> ProxyObject::internal_construct(MarkedVector<Value> arguments_list, FunctionObject& new_target)
{
auto& vm = this->vm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
auto& global_object = this->global_object();
auto& realm = *global_object.associated_realm();
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// A Proxy exotic object only has a [[Construct]] internal method if the initial value of its [[ProxyTarget]] internal slot is an object that has a [[Construct]] internal method.
LibJS: Implement [[Call]] and [[Construct]] internal slots properly This patch implements: - Spec compliant [[Call]] and [[Construct]] internal slots, as virtual FunctionObject::internal_{call,construct}(). These effectively replace the old virtual FunctionObject::{call,construct}(), but with several advantages: - Clear and consistent naming, following the object internal methods - Use of completions - internal_construct() returns an Object, and not Value! This has been a source of confusion for a long time, since in the spec there's always an Object returned but the Value return type in LibJS meant that this could not be fully trusted and something could screw you over. - Arguments are passed explicitly in form of a MarkedValueList, allowing manipulation (BoundFunction). We still put them on the execution context as a lot of code depends on it (VM::arguments()), but not from the Call() / Construct() AOs anymore, which now allows for bypassing them and invoking [[Call]] / [[Construct]] directly. Nothing but Call() / Construct() themselves do that at the moment, but future additions to ECMA262 or already existing web specs might. - Spec compliant, standalone Call() and Construct() AOs: currently the closest we have is VM::{call,construct}(), but those try to cater to all the different function object subclasses at once, resulting in a horrible mess and calling AOs with functions they should never be called with; most prominently PrepareForOrdinaryCall and OrdinaryCallBindThis, which are only for ECMAScriptFunctionObject. As a result this also contains an implicit optimization: we no longer need to create a new function environment for NativeFunctions - which, worth mentioning, is what started this whole crusade in the first place :^)
2021-10-08 20:37:21 +01:00
// TODO: We should be able to turn this into a VERIFY(), this must be checked at the call site.
// According to the spec, the Construct() AO is only ever called with a constructor argument.
if (!is_function())
return vm.throw_completion<TypeError>(ErrorType::NotAConstructor, Value(this).to_string_without_side_effects());
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 1. Let handler be O.[[ProxyHandler]].
// 2. If handler is null, throw a TypeError exception.
LibJS: Implement [[Call]] and [[Construct]] internal slots properly This patch implements: - Spec compliant [[Call]] and [[Construct]] internal slots, as virtual FunctionObject::internal_{call,construct}(). These effectively replace the old virtual FunctionObject::{call,construct}(), but with several advantages: - Clear and consistent naming, following the object internal methods - Use of completions - internal_construct() returns an Object, and not Value! This has been a source of confusion for a long time, since in the spec there's always an Object returned but the Value return type in LibJS meant that this could not be fully trusted and something could screw you over. - Arguments are passed explicitly in form of a MarkedValueList, allowing manipulation (BoundFunction). We still put them on the execution context as a lot of code depends on it (VM::arguments()), but not from the Call() / Construct() AOs anymore, which now allows for bypassing them and invoking [[Call]] / [[Construct]] directly. Nothing but Call() / Construct() themselves do that at the moment, but future additions to ECMA262 or already existing web specs might. - Spec compliant, standalone Call() and Construct() AOs: currently the closest we have is VM::{call,construct}(), but those try to cater to all the different function object subclasses at once, resulting in a horrible mess and calling AOs with functions they should never be called with; most prominently PrepareForOrdinaryCall and OrdinaryCallBindThis, which are only for ECMAScriptFunctionObject. As a result this also contains an implicit optimization: we no longer need to create a new function environment for NativeFunctions - which, worth mentioning, is what started this whole crusade in the first place :^)
2021-10-08 20:37:21 +01:00
if (m_is_revoked)
return vm.throw_completion<TypeError>(ErrorType::ProxyRevoked);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 3. Assert: Type(handler) is Object.
// 4. Let target be O.[[ProxyTarget]].
// 5. Assert: IsConstructor(target) is true.
// 6. Let trap be ? GetMethod(handler, "construct").
auto trap = TRY(Value(&m_handler).get_method(vm, vm.names.construct));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 7. If trap is undefined, then
if (!trap) {
// a. Return ? Construct(target, argumentsList, newTarget).
return construct(vm, static_cast<FunctionObject&>(m_target), move(arguments_list), &new_target);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
}
// 8. Let argArray be CreateArrayFromList(argumentsList).
auto* arguments_array = Array::create_from(realm, arguments_list);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 9. Let newObj be ? Call(trap, handler, « target, argArray, newTarget »).
auto new_object = TRY(call(vm, trap, &m_handler, &m_target, arguments_array, &new_target));
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 10. If Type(newObj) is not Object, throw a TypeError exception.
LibJS: Implement [[Call]] and [[Construct]] internal slots properly This patch implements: - Spec compliant [[Call]] and [[Construct]] internal slots, as virtual FunctionObject::internal_{call,construct}(). These effectively replace the old virtual FunctionObject::{call,construct}(), but with several advantages: - Clear and consistent naming, following the object internal methods - Use of completions - internal_construct() returns an Object, and not Value! This has been a source of confusion for a long time, since in the spec there's always an Object returned but the Value return type in LibJS meant that this could not be fully trusted and something could screw you over. - Arguments are passed explicitly in form of a MarkedValueList, allowing manipulation (BoundFunction). We still put them on the execution context as a lot of code depends on it (VM::arguments()), but not from the Call() / Construct() AOs anymore, which now allows for bypassing them and invoking [[Call]] / [[Construct]] directly. Nothing but Call() / Construct() themselves do that at the moment, but future additions to ECMA262 or already existing web specs might. - Spec compliant, standalone Call() and Construct() AOs: currently the closest we have is VM::{call,construct}(), but those try to cater to all the different function object subclasses at once, resulting in a horrible mess and calling AOs with functions they should never be called with; most prominently PrepareForOrdinaryCall and OrdinaryCallBindThis, which are only for ECMAScriptFunctionObject. As a result this also contains an implicit optimization: we no longer need to create a new function environment for NativeFunctions - which, worth mentioning, is what started this whole crusade in the first place :^)
2021-10-08 20:37:21 +01:00
if (!new_object.is_object())
return vm.throw_completion<TypeError>(ErrorType::ProxyConstructBadReturnType);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
// 11. Return newObj.
LibJS: Implement [[Call]] and [[Construct]] internal slots properly This patch implements: - Spec compliant [[Call]] and [[Construct]] internal slots, as virtual FunctionObject::internal_{call,construct}(). These effectively replace the old virtual FunctionObject::{call,construct}(), but with several advantages: - Clear and consistent naming, following the object internal methods - Use of completions - internal_construct() returns an Object, and not Value! This has been a source of confusion for a long time, since in the spec there's always an Object returned but the Value return type in LibJS meant that this could not be fully trusted and something could screw you over. - Arguments are passed explicitly in form of a MarkedValueList, allowing manipulation (BoundFunction). We still put them on the execution context as a lot of code depends on it (VM::arguments()), but not from the Call() / Construct() AOs anymore, which now allows for bypassing them and invoking [[Call]] / [[Construct]] directly. Nothing but Call() / Construct() themselves do that at the moment, but future additions to ECMA262 or already existing web specs might. - Spec compliant, standalone Call() and Construct() AOs: currently the closest we have is VM::{call,construct}(), but those try to cater to all the different function object subclasses at once, resulting in a horrible mess and calling AOs with functions they should never be called with; most prominently PrepareForOrdinaryCall and OrdinaryCallBindThis, which are only for ECMAScriptFunctionObject. As a result this also contains an implicit optimization: we no longer need to create a new function environment for NativeFunctions - which, worth mentioning, is what started this whole crusade in the first place :^)
2021-10-08 20:37:21 +01:00
return &new_object.as_object();
}
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
void ProxyObject::visit_edges(Cell::Visitor& visitor)
{
Base::visit_edges(visitor);
LibJS: Rewrite most of Object for spec compliance :^) This is a huge patch, I know. In hindsight this perhaps could've been done slightly more incremental, but I started and then fixed everything until it worked, and here we are. I tried splitting of some completely unrelated changes into separate commits, however. Anyway. This is a rewrite of most of Object, and by extension large parts of Array, Proxy, Reflect, String, TypedArray, and some other things. What we already had worked fine for about 90% of things, but getting the last 10% right proved to be increasingly difficult with the current code that sort of grew organically and is only very loosely based on the spec - this became especially obvious when we started fixing a large number of test262 failures. Key changes include: - 1:1 matching function names and parameters of all object-related functions, to avoid ambiguity. Previously we had things like put(), which the spec doesn't have - as a result it wasn't always clear which need to be used. - Better separation between object abstract operations and internal methods - the former are always the same, the latter can be overridden (and are therefore virtual). The internal methods (i.e. [[Foo]] in the spec) are now prefixed with 'internal_' for clarity - again, it was previously not always clear which AO a certain method represents, get() could've been both Get and [[Get]] (I don't know which one it was closer to right now). Note that some of the old names have been kept until all code relying on them is updated, but they are now simple wrappers around the closest matching standard abstract operation. - Simplifications of the storage layer: functions that write values to storage are now prefixed with 'storage_' to make their purpose clear, and as they are not part of the spec they should not contain any steps specified by it. Much functionality is now covered by the layers above it and was removed (e.g. handling of accessors, attribute checks). - PropertyAttributes has been greatly simplified, and is being replaced by PropertyDescriptor - a concept similar to the current implementation, but more aligned with the actual spec. See the commit message of the previous commit where it was introduced for details. - As a bonus, and since I had to look at the spec a whole lot anyway, I introduced more inline comments with the exact steps from the spec - this makes it super easy to verify correctness. - East-const all the things. As a result of all of this, things are much more correct but a bit slower now. Retaining speed wasn't a consideration at all, I have done no profiling of the new code - there might be low hanging fruits, which we can then harvest separately. Special thanks to Idan for helping me with this by tracking down bugs, updating everything outside of LibJS to work with these changes (LibWeb, Spreadsheet, HackStudio), as well as providing countless patches to fix regressions I introduced - there still are very few (we got it down to 5), but we also get many new passing test262 tests in return. :^) Co-authored-by: Idan Horowitz <idan.horowitz@gmail.com>
2021-07-04 18:14:16 +01:00
visitor.visit(&m_target);
visitor.visit(&m_handler);
}
2022-04-01 20:58:27 +03:00
FlyString const& ProxyObject::name() const
{
VERIFY(is_function());
return static_cast<FunctionObject&>(m_target).name();
}
}