Fixes peak detection for samples like in https://github.com/haasn/libplacebo/issues/358
This might introduce flickering on some other samples, but was agreed
upstream that they are better overall.
Signed-off-by: Kacper Michajłow <kasper93@gmail.com>
Sockets of type SOCK_DGRAM don't support listen(), so it was
impossible to read from "unixgram" sockets in ffmpeg.
Signed-off-by: Rost Kurylo <rost.kurylo@netint.ca>
Add support for decoding 42ni and 23ni in mov/mp4.
Note that in24/in32 can be either LE or BE thanks to enda atom,
so this patch leaves the muxer unchanged.
Fixes#21445.
Signed-off-by: Nicolas Gaullier <nicolas.gaullier@cji.paris>
Photoshop documents can contain additional "auxiliary" channels that
don't take part in layer compositing, therefore, using the channel count
to determine the presence of an alpha channel in the merged image is
incorrect. Instead, as per the PSD specification, use the sign of the
layer count (present in the layers and masks section) to determine if
there is an alpha channel, then determine the number of primary channels
using both the presence of the alpha channel and the pixel format.
Already checked via CODEC_SAMPLERATES and CODEC_SAMPLEFMTS.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is pointless for them given that these values will
be overridden by the decoder lateron anyway.
The only exceptions to this are scenarios where the decoder
actually checks request_sample_fmt or where there are both
fixed- and floating point decoders.
(IMO something like get_format() for audio would be better for
both cases.)
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
ch_layouts, sample_fmts and supported_samplerates
are of no use for a decoder, so don't set them.
In this case this fixes an inconsistency:
ch_layouts contained mono and stereo, yet lateron
the AVCodecContext's ch_layout is always populated
with an AV_CHANNEL_ORDER_UNSPEC layout.
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
It is unnecessary for a decoder (the sample fmt is
set lateron during init and the user has no choice
over this (even for the decoders where sample_fmts
contains two entries).
(This also fixes the ADPCM_DECODER macro: It's second
and third parameters were called "name" and "sample_fmts",
yet the second argument always contained the sample fmts.)
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
SwsContext.{src,dst}_format is int (but uses enum AVPixelFormat)
values, so the accesses need to be performed using an int
for -fshort-enums support.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
In particular, make this code -fshort-enums compatible.
The branch can be optimized away by compilers when
sizeof(enum AVPixelFormat) == sizeof(enum AVSampleFormat).
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Return the data in an AVFrame instead. This is what several users
({find,cover}_rect*) want anyway. This also avoids accessing
AVFrame.format (an int) via an enum AVPixelFormat*.
*: This commit actually avoids two frame copies For find_rect:
av_frame_clone() contained an implicit alloc+copy.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Also rename it to ff_pixfmt_is_in(). This is more type-safe;
in particular, it is required to support -fshort-enum.
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Assemble it already in caf_write_packet(). This has the advantage
of reducing the amount of buffers used; it also allows to avoid
a seek when writing the trailer and avoids function call overhead
(for the avio_w8(); it also reduces codesize).
Reviewed-by: James Almer <jamrial@gmail.com>
Signed-off-by: Andreas Rheinhardt <andreas.rheinhardt@outlook.com>
Fixes: out of array access on resolution change with slices threads
Fixes: VULN-10/poc.ivf
Found-by: Zhenpeng (Leo) Lin from depthfirst
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array read
Fixes: VULN-6/poc.raw
Found-by: Zhenpeng (Leo) Lin from depthfirst
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Fixes: out of array access if a filter-graph is used the injects changing dimensions
Found-by: Zhenpeng (Leo) Lin from depthfirst
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
This fixes running the test under Valgrind, where more, unrelated lines are
printed, making the comparison fail.
Signed-off-by: James Almer <jamrial@gmail.com>
Reset `sc->stsd_count` before parsing entries. This number doesn't get
reset, which means that multiple parse passes can increment it past the
`sc->extradata` array end and cause OOB writes.
Abort earlier if subblock durations are inconsistent with their containing block,
and ensure each subblock duration is at least 1.
Signed-off-by: James Almer <jamrial@gmail.com>
Abort earlier if subblock durations are inconsistent with their containing block,
and ensure each subblock duration is at least 1.
Signed-off-by: James Almer <jamrial@gmail.com>
It was done for the sake of having subblock_duration not be zero as the spec
forbids that value, but harcoding it to any arbitrary value is no better
considering the user is meant to fill the entire structure.
This helps speeding up the function when trying to allocate a struct with a
huge amount of blocks.
Signed-off-by: James Almer <jamrial@gmail.com>
EXIF IFD entries with TIFF field type 0 are invalid per the specification.
Without a check, exif_read_values() fails to allocate entry->value,
causing an out of memory error.
This patch skips such entries early during parsing, allowing decoding
to continue normally.
Fixes: https://code.ffmpeg.org/FFmpeg/FFmpeg/issues/21623
Fixes: use of uninitialized memory
Fixes: 471771529/clusterfuzz-testcase-minimized-ffmpeg_dem_SCD_fuzzer-5328203515494400
Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpeg
Signed-off-by: Michael Niedermayer <michael@niedermayer.cc>
Sometimes, HTTP sources require a lot of seeking during probing / header
parsing (especially for formats like MXF). Currently, we need to completely
tear down and re-establish the connection most times this happens, which puts
a lot of stress on the network stack and also results in transmission of
possibly many unnecessary bytes.
This patch adds an option to allow FFmpeg to request partial ranges during
the initialization stage. This is done until the initial request size is fully
read, after which we fall back to the normal behavior (i.e. infinite streaming
via an unbounded request).
The usefulness of this is limited without also specifying -multiple_requests 1,
since otherwise there is little point to requesting partial ranges to begin
with. (However, it is semantically independent, so we keep it that way.)
When the previous reply was a partial response (e.g. due to a seek to the
end of the file), and the remaining data from that partial response is
below the short seek size threshold, we can serve this seek by just draining
that data and re-using the existing connection.
This can currently only happen when using keep-alive connections
(-multiple_requests 1) and seeking from the end of the file to somewhere
else, in which case the file's tail can be drained and the connection re-used.
Under other circumstances, however, we still need to force a reconnection,
because we do not yet send partial range requests. (This will be changed in the
following commit)
We need to take special care not to regress the existing fallback logic
for when `http_open_cnx` fails, so here is a quick case analysis:
non-drain path:
- identical to the current
soft drain fails: (ffurl_read error path)
- s->hd = old_hd = NULL
- http_open_cnx() always opens a new connection
- on failure, old buffer is restored and s->hd remains NULL
soft drain succeeds, http_open_cnx() fails:
- s->hd is set to NULL by http_open_cnx() failure path
- old_hd was never set, so remains NULL
- old buffer is restored, s->hd remains NULL
In either case, the outcome that any (previously valid) buffer is left as-is,
the offset is unchanged, and the connection ends up closed (s->hd == NULL).
This is okay to do after the previous change to http_buf_read, which allows
it to internally re-open the connection if needed.
If the Content-Range indicates a smaller range than what we expected,
we should send a new request for the remainder before attempting to read
more.
Again, this commit is theoretically non-functional on its own, since any
conforming HTTP server should give us the entire range we asked for in the
first place, but it is semantically independent from and prepares us for the
following changes.
This could conceivably happen currently if the user tries reading more
bytes after the last chunk has already been received. In this case,
we currently segfault - but simply returning AVERROR(EIO) seems more
reasonable and lets the higher end retry the connection in this case.
In the event that the range returned is smaller than the true filesize, we
should only expect to receive that many bytes - not the entire rest of the
file.
This commit is theoretically non-functional on its own, since any conforming
HTTP server will always return us the full file range, but I wanted to split
it off from the subsequent changes in order to make review easier.
